Shop
Showing 505–540 of 7131 results
-
Taps & DiesBORDO Chrome Alloy UNC 2″ Button Die
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Taps & DiesBORDO Chrome Alloy UNC Die Nut
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Taps & DiesBORDO Chrome Alloy UNF
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Taps & DiesBORDO Chrome Alloy UNF 1-1/2″ Button Die
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Taps & DiesBORDO Chrome Alloy UNF 1″ Button Die
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Taps & Dies
BORDO Chrome Alloy UNF 2″ Button Die
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Taps & Dies
BORDO Chrome Alloy UNF Die Nut
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
ChuckingBORDO Chucking Fractional
- Bordo Chucking Reamers are made from premium HSS-Co.
- They feature a 10° left hand spiral for effective swarf removal.
- Right hand cutting.
- H7 hole limit (tolerance).
- Chucking reamers are used in a drill chuck or collet and are ideal for machining applications to create a sliding fit, to secure dowel pins, etc.
- Chucking reamers are characterised by a very short lead at the start.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chucking
BORDO Chucking Metric
- Bordo Chucking Reamers are made from premium HSS-Co.
- They feature a 10° left hand spiral for effective swarf removal.
- Right hand cutting.
- H7 hole limit (tolerance).
- Chucking reamers are used in a drill chuck or collet and are ideal for machining applications to create a sliding fit, to secure dowel pins, etc.
- Chucking reamers are characterised by a very short lead at the start.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsBORDO Cobalt Bi-Metal 1/2 – 5/8″ Mandrel Adaptor
- 1/2 – 5/8″ Mandrel Adaptor
- Mandrel adaptor for small thread mandrels to fit hole saws >30mm.
(0 reviews) -
Hole Saws & KitsBORDO Cobalt Bi-Metal 12″ Extension
- 12″ Extension for use with 7/16″ hex shanks
- Extension 300mm (12″) for use with 5518, 5520 & 5545 mandrels.
(0 reviews) -
Hole Saws & KitsBORDO Cobalt Bi-Metal Pilot Drills
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsBORDO Cobalt Bi-Metal Set Screw For Mandrels
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
-
Drill Bits & SetsBORDO Cobalt HSS-Co5 Jobber Drill Fractional
- Bordo Fractional Cobalt Tough HSS-Co5 Twist Drills.
- ANSI B94-11
- 135° Split Point (crankshaft point).
- Split point is self centering and the short distance from the drill axis to the outer corners results in faster penetration, reducing the need for end thrust.
- The 135° point should be used to cut harder steel materials especially in deep hole applications.
- In these situations it will produce thicker chips minimising work hardening of the cavity.
- Faster penetration reduces abrasion and friction along the cutting edges.
- Cobalt HSS Twist drills are extremely hard and provide superior performance and increased tool life especially in stainless steel and high tensile steel.
- Bronze Finish (gold oxide) surface treatment. The metallic brown coloured low temperature temper treatment is normally only used on cobalt tools for identification purposes.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO Cobalt HSS-Co5 Jobber Drill Fractional Set
- Bordo Fractional Cobalt Tough HSS-Co5 Twist Drills.
- ANSI B94-11
- 135° Split Point (crankshaft point).
- Split point is self centering and the short distance from the drill axis to the outer corners results in faster penetration, reducing the need for end thrust.
- The 135° point should be used to cut harder steel materials especially in deep hole applications.
- In these situations it will produce thicker chips minimising work hardening of the cavity.
- Faster penetration reduces abrasion and friction along the cutting edges.
- Cobalt HSS Twist drills are extremely hard and provide superior performance and increased tool life especially in stainless steel and high tensile steel.
- Bronze Finish (gold oxide) surface treatment. The metallic brown coloured low temperature temper treatment is normally only used on cobalt tools for identification purposes.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & Sets
BORDO Cobalt HSS-Co5 Jobber Drill Metric
- Bordo Metric Cobalt Tough HSS-Co5 Twist Drills.
- DIN338
- 135° Split Point (crankshaft point).
- Split point is self centering and the short distance from the drill axis to the outer corners results in faster penetration, reducing the need for end thrust.
- The 135° point should be used to cut harder steel materials especially in deep hole applications.
- In these situations it will produce thicker chips minimising work hardening of the cavity.
- Faster penetration reduces abrasion and friction along the cutting edges.
- Cobalt HSS Twist drills are extremely hard and provide superior performance and increased tool life especially in stainless steel and high tensile steel.
- Bronze Finish (gold oxide) surface treatment. The metallic brown coloured low temperature temper treatment is normally only used on cobalt tools for identification purposes.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO Cobalt HSS-Co5 Jobber Drill Metric Set
- Bordo Metric Cobalt Tough HSS-Co5 Twist Drills.
- DIN338
- 135° Split Point (crankshaft point).
- Split point is self centering and the short distance from the drill axis to the outer corners results in faster penetration, reducing the need for end thrust.
- The 135° point should be used to cut harder steel materials especially in deep hole applications.
- In these situations it will produce thicker chips minimising work hardening of the cavity.
- Faster penetration reduces abrasion and friction along the cutting edges.
- Cobalt HSS Twist drills are extremely hard and provide superior performance and increased tool life especially in stainless steel and high tensile steel.
- Bronze Finish (gold oxide) surface treatment. The metallic brown coloured low temperature temper treatment is normally only used on cobalt tools for identification purposes.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO COBALT TiAlN Coated Spiral Flute
- Bordo Cobalt Spiral Flute Titanium Aluminium Nitride (TiAlN) coated step drills offer unparalleled performance when drilling hard metals such as stainless steel.
- HSS-Co5 material provides increased performance and tool life when machining tough steels.
- Bordo step drills are ideal for electrical contractors, sheetmetal workers and auto mechanics.
- Step drills are designed for drilling repetitive holes in steel, stainless steel, copper, brass, aluminium, plastic, plexiglas, laminates and many other thin materials.
- High performance point for faster starting and reduced bit wander.
- No pilot hole required.
- Stepless drilling in the thinnest sheets.
- Burr-free drilling without sheet deformation.
- Automatic deburring.
- Spiral flutes enable easier tool penetration.
- Titanium Aluminium Nitride (TiAlN) is a thin film coating that was developed from Titanium Nitride.
- TiAlN offers higher temperature resistance than TiN, as well as slightly higher hardness and especially higher hot hardness (i.e. the hardness at high temperatures).
- It is primarily used in high temperature environments above the limits of TiN usage.
- This coating works by forming a thin surface layer of Alumina (Al2O3), or Aluminium Oxide ceramic.
- As the layer wears it continuously reforms.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO COBALT TiAlN Coated Spiral Flute Set
- 4-30mm 3 Pce Spiral Flute HSS Cobalt Step Drill Set
- HSS-Co5 (Cobalt) Titanium Aluminium Nitride Coated (TiAlN) Spiral Flute Step Drill Set
- Bordo Cobalt Spiral Flute Titanium Aluminium Nitride (TiAlN) coated step drills offer unparalleled performance when drilling hard metals such as stainless steel.
- HSS-Co5 material provides increased performance and tool life when machining tough steels.
- Bordo step drills are ideal for electrical contractors, sheetmetal workers and auto mechanics.
- Step drills are designed for drilling repetitive holes in steel, stainless steel, copper, brass, aluminium, plastic, plexiglas, laminates and many other thin materials.
- High performance point for faster starting and reduced bit wander.
- No pilot hole required.
- Stepless drilling in the thinnest sheets.
- Burr-free drilling without sheet deformation.
- Automatic deburring.
- Spiral flutes enable easier tool penetration.
- Titanium Aluminium Nitride (TiAlN) is a thin film coating that was developed from Titanium Nitride.
- TiAlN offers higher temperature resistance than TiN, as well as slightly higher hardness and especially higher hot hardness (i.e. the hardness at high temperatures).
- It is primarily used in high temperature environments above the limits of TiN usage.
- This coating works by forming a thin surface layer of Alumina (Al2O3), or Aluminium Oxide ceramic.
- As the layer wears it continuously reforms.
(0 reviews) -
BrushwareBORDO Condensor Tube Brushes Brass Wire
- Brass Wire
- Twisted in wire brushes are known by many names, such as spiral, tube, bottle, pipe and more, but generally they are manufactured using the same construction technique.
- A piece of wire is doubled over and bristle material is inserted between the fold of the wire stem, the wire stem is then twisted into a brush.
- The most common brush “fills” are steel wire, stainless steel wire, brass wire, and nylon.
- All Bordo condensor tube and boiler tube brushes feature a BSW male threaded ferrule.
- They may be used by hand or with power equipment.
- All brushes are available as single or double spiral.
- The double spiral are a heavier construction with a more dense brush face for more aggressive brushing and are ideally suited to use with a power tool.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BrushwareBORDO Condensor Tube Brushes Nylon
- Nylon
- Twisted in wire brushes are known by many names, such as spiral, tube, bottle, pipe and more, but generally they are manufactured using the same construction technique.
- A piece of wire is doubled over and bristle material is inserted between the fold of the wire stem, the wire stem is then twisted into a brush.
- The most common brush “fills” are steel wire, stainless steel wire, brass wire, and nylon.
- All Bordo condensor tube and boiler tube brushes feature a BSW male threaded ferrule.
- They may be used by hand or with power equipment.
- All brushes are available as single or double spiral.
- The double spiral are a heavier construction with a more dense brush face for more aggressive brushing and are ideally suited to use with a power tool.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BrushwareBORDO Condensor Tube Brushes Steel Wire
- Steel Wire
- Twisted in wire brushes are known by many names, such as spiral, tube, bottle, pipe and more, but generally they are manufactured using the same construction technique.
- A piece of wire is doubled over and bristle material is inserted between the fold of the wire stem, the wire stem is then twisted into a brush.
- The most common brush “fills” are steel wire, stainless steel wire, brass wire, and nylon.
- All Bordo condensor tube and boiler tube brushes feature a BSW male threaded ferrule.
- They may be used by hand or with power equipment.
- All brushes are available as single or double spiral.
- The double spiral are a heavier construction with a more dense brush face for more aggressive brushing and are ideally suited to use with a power tool.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO Counterbore Drill 180° Bright
- Bright finish HSS-Co5 (Cobalt) for extreme tool life.
- Use to enlarge the top of an existing hole to create a cylindrical-shaped opening with a flat bottom that acts as a seat for the head of a screw or wood plug.
- Ideal for use with standard cap screws or socket head screws.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO Counterbore Drill 180° Bright Set
- 6 Pce 3-10mm 180 Degree Counterbore Drill Set
- Bright finish HSS-Co5 (Cobalt) for extreme tool life.
- Use to enlarge the top of an existing hole to create a cylindrical-shaped opening with a flat bottom that acts as a seat for the head of a screw or wood plug.
- Ideal for use with standard cap screws or socket head screws.
(0 reviews) -
Drill Bits & SetsBORDO Counterbores 180° Single
- Bright finish HSS-Co5 (Cobalt) for extreme tool life.
- Use to enlarge the top of an existing hole to create a cylindrical-shaped opening with a flat bottom that acts as a seat for the head of a screw or wood plug.
- Ideal for use with standard cap screws or socket head screws.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO Counterbores Set
- 6 Pce 3-10mm 180 Degree Counterbore Set
- Bright finish HSS-Co5 (Cobalt) for extreme tool life.
- Use to enlarge the top of an existing hole to create a cylindrical-shaped opening with a flat bottom that acts as a seat for the head of a screw or wood plug.
- Ideal for use with standard cap screws or socket head screws.
(0 reviews) -
Drill Bits & SetsBORDO Countersink Single Flute Indexable
- Carbide strip cutter with replaceable insert.
- Clean cutting even at lower RPMs.
- Tri-flat shank faciltiates high torque transmission in standard three jaw chucks.
- Chatter free countersinking and deburring even at low RPMs.
- Excellent surface finish.
- Two cutting edges for longer tool life.
- Cemented carbide insert is an alloy of Tungsten Carbide (WC) and Cobalt (Co).
- B100 is a unique rare metal grade with great heat and cracking resistance.
- TiAlN PVD coated – suitable for applications with low to intermediate cutting speed.
- PVD coated grades are recommended for applications with low feed rate where high edge toughness is required.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO Countersink Single Flute Indexable Carbide Inserts
- cutting edges for longer tool life.
- Cemented carbide insert is an alloy of Tungsten Carbide (WC) and Cobalt (Co).
- B100 is a unique rare metal grade with great heat and cracking resistance.
- TiAlN PVD coated – suitable for applications with low to intermediate cutting speed.
- PVD coated grades are recommended for applications with low feed rate where high edge toughness is required.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsBORDO Deburrer
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsBORDO Deburrer Pen
- Aluminium Handle Pencil Deburrer with SE10 Blade
- Heavy duty aluminium pen body with SE10 blade.
- This heavy duty 3.2mm HSS blade is ideal for straight edge and hole edge deburring.
- Use for deburring materials with spiral chips, such as: steel, aluminium, copper, and plastics.
(0 reviews) -
BurrsBORDO Deburring Blade Holders & Handles
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsBORDO Deburring Blades
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Deck BitsBORDO Deck Bit Pilot Drills
Replacement pilot drill
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO Delta Point Bright Finish HSS Metric
- Bordo Metric Delta Point M2-HSS Twist Drills.
- DIN338
- Delta Point drills have a multi-faceted cutting tip.
- Rather than try and modify existing point types, or tweak the grind angles, Delta Point tip design required a revolutionary re-think of drill tip function.
- The overall length of the cutting edge significantly exceeds that of conventional drills.
- This means more edge doing the cutting and the results are simply extraordinary.
- Drilling times for a range of split point and Delta Point drills consistently showed that Delta Point bits were twice as fast in mild steel.
- During independent lifetime testing Delta point drill bits averaged 609 holes in 20mm mild steel, ten times more holes than split point drills.
- DRILLS FASTER LASTS LONGER.
- Bright Finish Twist Drills have no surface treatment and are supplied in the as-ground condition. These tools are suitable for general purpose use, particularly for non-ferrous applications.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO Delta Point Bright Finish HSS Metric Sets
- DIN338
- Delta Point drills have a multi-faceted cutting tip.
- Rather than try and modify existing point types, or tweak the grind angles, Delta Point tip design required a revolutionary re-think of drill tip function.
- The overall length of the cutting edge significantly exceeds that of conventional drills.
- This means more edge doing the cutting and the results are simply extraordinary.
- Drilling times for a range of split point and Delta Point drills consistently showed that Delta Point bits were twice as fast in mild steel.
- During independent lifetime testing Delta point drill bits averaged 609 holes in 20mm mild steel, ten times more holes than split point drills.
- DRILLS FASTER LASTS LONGER.
- Bright Finish Twist Drills have no surface treatment and are supplied in the as-ground condition. These tools are suitable for general purpose use, particularly for non-ferrous applications.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page