Shop
Showing 4465–4500 of 15223 results
-
GeneratorsITM 13KVA Generator Petrol 10,600W Peak with Honda GX630 Engine
ITM GX Series generators are powered by high-quality, reliable Honda GX Series 4-stroke engines, ensuring consistent performance and durability for professional use. Equipped with advanced AVR (Automatic Voltage Regulator) technology, these generators provide a clean and stable power supply with low THD (Total Harmonic Distortion) of <5%, making them safe for sensitive electronic equipment.Built to meet the demands of modern tradespeople, these generators feature:
- Powerful 4-stroke OHV engines for dependable power output.
- IP66-rated power outlets for superior protection in tough environments.
- RCD (Residual Current Device) for enhanced electrical safety.
- Low oil sensor to protect the engine from damage.
For peace of mind, every generator comes with:
- 2-year trade warranty.
- 3-year Honda engine warranty.
Whether you’re on a busy construction site or managing a large property, ITM GX Series generators offer the rugged dependability professionals need.
Specifications
- Wheel Kit not included: Sold Separately
- Max Watts: 10,500
- Rated Watts: 9,500
- Outlets: 2 x IP66 15A and 1 x IP66 32A Single Phase
- Engine Model: GX630
- Engine HP: 22hp
- Noise @ 7m Full Load: 79dB
- Fuel Tank: 34L
- Running Time: 11 Hours
- Starting Method: Electric
- Net Weight: 155kg
- Gross Weight: 170kg
(0 reviews) -
GeneratorsITM 15KVA Generator Petrol 12,000W Peak with Honda GX690 Engine
ITM GX Series generators are powered by high-quality, reliable Honda GX Series 4-stroke engines, ensuring consistent performance and durability for professional use. Equipped with advanced AVR (Automatic Voltage Regulator) technology, these generators provide a clean and stable power supply with low THD (Total Harmonic Distortion) of <5%, making them safe for sensitive electronic equipment.Built to meet the demands of modern tradespeople, these generators feature:
- Powerful 4-stroke OHV engines for dependable power output.
- IP66-rated power outlets for superior protection in tough environments.
- RCD (Residual Current Device) for enhanced electrical safety.
- Low oil sensor to protect the engine from damage.
For peace of mind, every generator comes with:
- 2-year trade warranty.
- 3-year Honda engine warranty.
Whether you’re on a busy construction site or managing a large property, ITM GX Series generators offer the rugged dependability professionals need.
Specifications
- Wheel Kit not included: Sold Separately
- Max Watts: 12,000
- Rated Watts: 10,500
- Outlets: 2 x IP66 15A and 1 x IP66 32A Single Phase
- Engine Model: GX690
- Engine HP: 24hp
- Noise @ 7m Full Load: 79dB
- Fuel Tank: 34L
- Running Time: 11 Hours
- Starting Method: Electric
- Net Weight: 157kg
- Gross Weight: 173kg
(0 reviews) -
GeneratorsITM 2.8KVA Generator Petrol 2300W Peak Recoil Start
Features
All ITM generators are equipped with a reliable AVR (automatic voltage regulator) alternator utilising advanced electronic technology to provide a very pure energy supply with a THD (total harmonic distortion) of <5%. This clean and pure output means they are suitable to power even the most delicate electronic devices.- Powerful 4 Stroke OHV engines
- Low Oil Sensor
- Digital Multimeter Display
- Large Capacity Fuel Tanks
- 2 Year Trade Warranty
Specifications
- Engine HP: 6HP
- KVA: 2.8
- Max Watts: 2,300
- Rated Watts: 2,000
- Noise @ 7m Full Load: 75dB
- Outlets: 2 x 15A
- Fuel Tank: 15L
- Running Time – 50% Load: 19 hours
- Starting System: Recoil
- Handle & Wheel Kit: No
- Frame Dimensions: 59.5cm Long x 46.5cm Wide x 47cm High
- Net Weight: 41Kg
(0 reviews) -
GeneratorsITM 3.75KVA Generator Petrol 3000W Peak with Honda GX200
ITM GX Series generators are powered by high-quality, reliable Honda GX Series 4-stroke engines, ensuring consistent performance and durability for professional use. Equipped with advanced AVR (Automatic Voltage Regulator) technology, these generators provide a clean and stable power supply.
Built to meet the demands of modern tradespeople, these generators feature:
- Powerful 4-stroke OHV engines for dependable power output.
- IP66-rated power outlets for superior protection in tough environments.
- RCD (Residual Current Device) for enhanced electrical safety.
- Low oil sensor to protect the engine from damage.
For peace of mind, every generator comes with:
- 2-year trade warranty.
- 3-year Honda engine warranty.
Whether you’re on a busy construction site or managing a large property, ITM GX Series generators offer the rugged dependability professionals need.
Specifications
3.75KVA 6.5HP GENERATOR- Max Watts: 3000
- Rated Watts: 2800
- Outlets: 1x IP66 15A
- Engine Model: GX200
- Engine HP: 6.5hp
- Noise @ 7m Full Load: 75dB
- Fuel Tank: 3.6L
- Running Time: 4.5 Hours
- Starting Method: Recoil
- Handle & Wheel Kit: No
- Net Weight: 47kg
(0 reviews) -
1000V SocketsITM 3/8″ Dr Metric 1000V Extension Bars
3/8″ Drive 3″ Insulated Extension Bar
- Approved for live working up to 1,000 volts
- Integrated protective insulation with two colours to clearly indicate if there is any damage
- Ball recess on the female end to grip the ratchet
- Ball socket retainer on the male end to securely grip the socket
- Chrome vanadium
- Design and manufactured to DIN3123B and IEC60900
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
1000V SocketsITM 3/8″ Dr Metric 1000V Insulated Ratchet
Features
3/8″ Drive Insulated Ratchet- Approved for live working up to 1,000 volts
- 72 teeth giving 5 degree increments between clicks
- Twist reverse for quickly and easily changing between tightening and loosening
- Design and manufactured to DIN3122D and IEC60900
Specifications
- Drive: 3/8″
- No of Teeth: 72
- Reverse Direction: Twist
- Length 2: 8Inch
- Tethering Facility: No
- Insulated: Yes
- Length: 200mm
- Included In:
- TEFSKV19
- TEDV3818
- TTV3814
- TEFXV27
- TEFXV28
- TEFSKV19NZ
(0 reviews) -
1000V SocketsITM 3/8″ Dr Metric 1000V Sockets
3/8″ Drive Insulated Socket
- Approved for live working up to 1,000 volts
- Integrated protective insulation with two colours to clearly indicate if there is any damage
- 6 point single hexagon socket for a better grip
- Chrome vanadium
- Ball recess on the female end to grip the ratchet
- Design and manufactured to DIN3120/3124, ISO2725 and IEC 60900
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BendersITM 3/8″ to 1″ Hydraulic Pipe Bender
- Suitable for Carbon Steel and Wrought Iron Pipe
- 3/8″ – 1″ NB pipe capacity
- 3/8″, 1/2″, 3/4″, 1″ cast steel formers
- 0° to 90° Bending angle
- 6,000kg Force capacity
- 150mm Stroke
- Supplied in metal carry case
(0 reviews) -
BendersITM 3/8″ to 1″ Tube Bender
Features
- Optimum bending results without deformation or ripples
- Universal applications include: U-bends, counter bends, swan-neck bends
- precise and simple to use
- Bench mountable
- Supplied in robust plastic carry case
Specifications
- Suitable for standard Steel and copper pipe
- 3/8″ – 1″ NB tube capacity
- 3/8″, 1/2″, 9/16″, 5/8″, 3/4″, 7/8″, 1″ Cast steel formers
- 0° to 180° Bending angle
Description
Bending Shoes
For bending pipes to 90°. Made of nodular cast iron, the bending shoes are strong and durable.(0 reviews) -
Metal Cutting Saw BladesITM 350mm Cermet Carbide Metal Cutting Blade
Features
110 Teeth Thin Metals Cermet Tipped Blade for cutting ferrous and non-ferrous metals including stainless steel & mild steel.Experience flawless cuts with precision and ease, as our Cermet Carbide Metal Cutting Blades effortlessly slice through mild steel and stainless steel.
The advanced cermet carbide technology and Flourine coating delivers unmatched hardness and heat resistance. This means longer blade life, reduced downtime, and significant cost savings for your business. Whether you’re working in construction, fabrication, or industrial manufacturing, our blades are built to withstand the most demanding applications.
Our Cermet Carbide Metal Cutting Blades are designed with safety in mind. With enhanced vibration dampening and reduced kickback, you can trust in a secure and stable cutting experience
- Up to 3 times longer life than standard metal cutting T.C.T. blades
- Saves time & money, giving cool cuts that need little to no finishing
- Superior hardness, wear and heat resistance
Specifications
Blade Diameter: 355mm (14″)
Number of Teeth: 110
Blade Bore: 25.4mm (1″)
Blade Kerf: 2.1mm
Blade Thickness: 1.7mm / 1.9mm
Max. RPM: 1500
Coating: FlourineSolid Material Thickness
- Mild Steel:
Maximum 6mm
Minimum 2mm - Stainless Steel:
Maximum 6mm
Minimum 2mm
Tube and Box Section Material Wall Thickness
- Mild Steel:
Maximum 6mm
Minimum 1mm - Stainless Steel:
Maximum 6mm
Minimum 1mm
(0 reviews) -
Metal Cutting Saw BladesITM 350mm Cermet Carbide Metal Cutting Blade
Features
64 Teeth General Purpose Cermet Tipped Blade for cutting ferrous metals including stainless steel & mild steel.Experience flawless cuts with precision and ease, as our Cermet Carbide Metal Cutting Blades effortlessly slice through mild steel and stainless steel.
The advanced cermet carbide technology and delivers unmatched hardness and heat resistance. This means longer blade life, reduced downtime, and significant cost savings for your business. Whether you’re working in construction, fabrication, or industrial manufacturing, our blades are built to withstand the most demanding applications.
Our Cermet Carbide Metal Cutting Blades are designed with safety in mind. With enhanced vibration dampening and reduced kickback, you can trust in a secure and stable cutting experience
- Up to 3 times longer life than standard metal cutting T.C.T. blades
- Saves time & money, giving cool cuts that need little to no finishing
- Superior hardness, wear and heat resistance
Specifications
Blade Diameter: 355mm (14″)
Number of Teeth: 64
Blade Bore: 25.4mm (1″)
Blade Kerf: 2.4mm
Blade Thickness: 2.0mm
Max. RPM: 1500Solid Material Thickness
- Mild Steel:
Maximum 25mm
Minimum 4mm - Stainless Steel:
Maximum 10mm
Minimum 4mm
Tube and Box Section Material Wall Thickness
- Mild Steel:
Maximum 12mm
Minimum 2mm - Stainless Steel:
Maximum 5mm
Minimum 2mm
(0 reviews) -
Power ToolsITM 350mm Metal Cutting Drop Saw
- 350mm Tungsten Carbide Tipped blade.
- Saves time & money giving cool cuts that need little to no finishing, eliminating any need for grinding or cool down time.
- The fully enclosed retractable guard increases user safety.
- Heavy-duty vice 90° – 45°.
- Pipe vice attachment.
- For cutting mild steel and aluminium.
- 12 months warranty.
- Supplied with Tungsten Carbide Tipped mild steel blade.
- Motor: 2200W, 3.0hp Single Phase 240V
- Blade Speed: Single Speed 1450rpm
- Blade Size: 350mm
- Blade Bore: 25.4mm
- Weight: 29kg
90° Cutting Capacity:
- Solid Round: 25mm
- Hollow Round: 120mm
- Square: 120mm
- Rectangle: 120 x 120mm
45° Right Cutting Capacity:
- Solid Round: 25mm
- Hollow Round: 90mm
- Square: 90mm
- Rectangle: 120 x 90mm
Replacement Blades:
- SSBL350-MS for mild steel to 25.4mnm
- SSBL350-TS for thin mild steel to 6mm
- SSBL350-AL for aluminium to 25.4mm
(0 reviews) -
Metal Cutting SawsITM 350mm Metal Cutting Drop Saw, 240v, Inc. Tct Mild Steel Blade
Features
- 350mm Tungsten Carbide Tipped blade.
- Saves time & money giving cool cuts that need little to no finishing, eliminating any need for grinding or cool down time.
- The fully enclosed retractable guard increases user safety.
- Heavy-duty vice 90° – 45°.
- Pipe vice attachment.
- For cutting mild steel and aluminium.
- For cutting stainless steel, the ITM Cermet Blades must be purchased in addition.
- 12 months warranty.
- Supplied with a Tungsten Carbide Tipped mild steel blade.
Specifications
Motor 3hp Single Phase (240V) Blade Speed Single Speed 1450rpm Blade Size 350mm Blade Bore 25.4mm Weight 29kg Cutting Capacity Cutting Angle Solid Round Round Square Rectangle 90° 25mm 120mm 120mm 120 x 120mm 45° 25mm 90mm 90mm 120 x 90mm (0 reviews) -
Metal Cutting Saw BladesITM 350mm TCT Saw Blades
Industrial quality T.C.T. cutting saw blade.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Metal Cutting Saw BladesITM 400mm TCT Saw Blades
With two pin holes – designed for use with MACC TA400 Saw
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
GeneratorsITM 4KVA Generator Petrol 3400W Peak Electric Start
Features
All ITM generators are equipped with a reliable AVR (automatic voltage regulator) alternator utilising advanced electronic technology to provide a very pure energy supply with a THD (total harmonic distortion) of <5%. This clean and pure output means they are suitable to power even the most delicate electronic devices.- Powerful 4 Stroke OHV engines
- Low Oil Sensor
- Digital Multimeter Display
- Large Capacity Fuel Tanks
- 2 Year Trade Warranty
Specifications
- Engine HP: 8HP
- KVA: 4
- Max Watts: 3,400
- Rated Watts: 3,200
- Noise @ 7m Full Load: 76dB
- Outlets: 2 x 15A
- Fuel Tank: 15L
- Running Time – 50% Load: 14 hours
- Starting System: Electric
- Handle & Wheel Kit: No
- Frame Dimensions: 59.5cm Long x 46.5cm Wide x 47cm High
- Net Weight: 52Kg
(0 reviews) -
GeneratorsITM 4KVA Generator Petrol Construction 3400W Peak Electric start with Remote
All ITM generators are equipped with a reliable AVR (automatic voltage regulator) alternator utilising advanced electronic technology to provide a very pure energy supply with a THD (total harmonic distortion) of <5%. This clean and pure output means they are suitable to power even the most delicate electronic devices.- Powerful 4 Stroke OHV engines
- Low Oil Sensor
- Digital Multimeter Display
- Large Capacity Fuel Tanks
- 2 Year Trade Warranty
The Construction Series models have a simple push button electric start (battery included) with a convenient remote control which is perfect for the large property or worksite where the generator may not be close to the tool being powered.
Complete with a heavy duty handle and wheel kit, IP66 rated power outlets and RCD (Residual Current Device.), the construction series gens are perfect for the professional tradesman needing a tough yet reliable source of power.
Specifications
- Engine HP: 8HP
- KVA: 4
- Max Watts: 3,400
- Rated Watts: 3,200
- Noise @ 7m Full Load: 76dB
- Outlets: 1 x IP66 15A
- Fuel Tank: 15L
- Running Time – 50% Load: 14 hours
- Starting System: Electric w/ Remote
- Handle & Wheel Kit: Yes
- Frame Dimensions: 59.5cm Long x 46.5cm Wide x 47cm High
- Net Weight: 54Kg
(0 reviews) -
Punches & ShearsITM 5 Degree Round Dies
5° Inclined Round Die to suit Holemaker PRO 60 HP & PRO 110 HP
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
GeneratorsITM 6.8KVA Generator Petrol 5500W Peak Electric Start
Features
All ITM generators are equipped with a reliable AVR (automatic voltage regulator) alternator utilising advanced electronic technology to provide a very pure energy supply with a THD (total harmonic distortion) of <5%. This clean and pure output means they are suitable to power even the most delicate electronic devices.- Powerful 4 Stroke OHV engines
- Low Oil Sensor
- Digital Multimeter Display
- Large Capacity Fuel Tanks
- 2 Year Trade Warranty
Specifications
- Engine HP: 13HP
- KVA: 6.8
- Max Watts: 5,500
- Rated Watts: 5,000
- Noise @ 7m Full Load: 78dB
- Outlets: 2 x 15A
- Fuel Tank: 25L
- Running Time – 50% Load: 13 hours
- Starting System: Electric
- Handle & Wheel Kit: Yes
- Frame Dimensions: 69.5cm Long x 54.5cm Wide x 56.5cm High
- Net Weight: 81Kg
(0 reviews) -
GeneratorsITM 7.5KVA Generator Petrol 6000W Peak with Honda GX390 Engine
ITM GX Series generators are powered by high-quality, reliable Honda GX Series 4-stroke engines, ensuring consistent performance and durability for professional use. Equipped with advanced AVR (Automatic Voltage Regulator) technology, these generators provide a clean and stable power supply.
Built to meet the demands of modern tradespeople, these generators feature:
- Powerful 4-stroke OHV engines for dependable power output.
- IP66-rated power outlets for superior protection in tough environments.
- RCD (Residual Current Device) for enhanced electrical safety.
- Low oil sensor to protect the engine from damage.
For peace of mind, every generator comes with:
- 2-year trade warranty.
- 3-year Honda engine warranty.
Whether you’re on a busy construction site or managing a large property, ITM GX Series generators offer the rugged dependability professionals need.
Specifications
7.5KVA 13HP GENERATOR- Max Watts: 6000
- Rated Watts: 5500
- Outlets: 2 x IP66 15A
- Engine Model: GX390
- Engine HP: 13hp
- Noise @ 7m Full Load: 78dB
- Fuel Tank: 25L
- Running Time: 13 Hours
- Starting Method: Recoil
- Handle & Wheel Kit: Yes
- Net Weight: 80kg
(0 reviews) -
GeneratorsITM 8.1KVA Generator Petrol 6500W Peak Electric Start
Features
All ITM generators are equipped with a reliable AVR (automatic voltage regulator) alternator utilising advanced electronic technology to provide a very pure energy supply with a THD (total harmonic distortion) of <5%. This clean and pure output means they are suitable to power even the most delicate electronic devices.- Powerful 4 Stroke OHV engines
- Low Oil Sensor
- Digital Multimeter Display
- Large Capacity Fuel Tanks
- 2 Year Trade Warranty
Specifications
- Engine HP: 15HP
- KVA: 8.1
- Max Watts: 6,500
- Rated Watts: 6,000
- Noise @ 7m Full Load: 79dB
- Outlets: 2 x 15A
- Fuel Tank: 25L
- Running Time – 50% Load: 12 hours
- Starting System: Electric
- Handle & Wheel Kit: Yes
- Frame Dimensions: 69.5cm Long x 54.5cm Wide x 56.5cm High
- Net Weight: 85Kg
(0 reviews) -
GeneratorsITM 8.1KVA Generator Petrol Construction 3500W Peak Electric Start with Remote
All ITM generators are equipped with a reliable AVR (automatic voltage regulator) alternator utilising advanced electronic technology to provide a very pure energy supply with a THD (total harmonic distortion) of <5%. This clean and pure output means they are suitable to power even the most delicate electronic devices.- Powerful 4 Stroke OHV engines
- Low Oil Sensor
- Digital Multimeter Display
- Large Capacity Fuel Tanks
- 2 Year Trade Warranty
The Construction Series models have a simple push button electric start (battery included) with a convenient remote control which is perfect for the large property or worksite where the generator may not be close to the tool being powered.
Complete with a heavy duty handle and wheel kit, IP66 rated power outlets and RCD (Residual Current Device.), the construction series gens are perfect for the professional tradesman needing a tough yet reliable source of power.
Specifications
- Engine HP: 15HP
- KVA: 8.1
- Max Watts: 6,500
- Rated Watts: 6,000
- Noise @ 7m Full Load: 79dB
- Outlets: 2 x IP66 15A
- Fuel Tank: 25L
- Running Time – 50% Load: 12 hours
- Starting System: Electric w/ Remote
- Handle & Wheel Kit: Yes
- Frame Dimensions: 69.5cm Long x 54.5cm Wide x 56.5cm High
- Net Weight: 88Kg
(0 reviews) -
GeneralITM ABM 14 Bevelling Machine
The ABM-14 is a bevelling machine designed to mill plate made of carbon steel, alloy steel, stainless steel or aluminium alloys. In just one single run the machine can bevel up to 2.6 m/min. (8.5 ft/min.) to a width of 12 mm (1/2″) in workpieces with tensile strength of Rm 392 MPa (57,000 psi). Maximum bevel width is 14 mm (9/16″). Depending on materials two or more runs are needed. Bevel angles incl. 30° (standard) and with optional angle variation devices also 22.5°, 25°, 35°, 37.5° or 45°. The machine can bevel plates from the top and bottom. In the case of the milling tool getting stuck in the material and beveling cannot be continued the direction of rotation of the tool can be reversed to release the machine from the workpiece. Hearing protection equipment not required as the noise produced by the machine does not exceed 70 dB.
Features:
- Fast and efficient
- Bevels both small and large pieces to cover most of the common applications for its type.
- Auto feed on large plates with optional trolley.
- Bevelling of lower edge in inverted position.
- Standard shearing cutter for machining carbon steel.
- 2 optional shearing cutters dedicated to stainless/alloyed steel and aluminum.
- Reversible spindle against stuck milling tool. Versatile and transportable on its own trolley.
- Low noise.
Set Includes:
- WA-ABM14 beveller
- Bevelling cutter
- Cutter extraction tool
- Tube beveling shaft
- Tube beveling washer
- Flat wrenches: 12-13mm, 18-19mm, 24-26mm
- Hex wrenches: 5mm and 6mm
- Operator’s manual
(0 reviews) -
GeneralITM ABM-30 Auto Feed Portable Bevelling Machine (-60 to +60 Degree), Max Bevel Width 30mm
Features
The ABM-30 portable bevelling machine performs auto feed beveling on steel plates on top, face and bottom edges.
The beveller needs no track to move along steel plate to produce accurate high-quality double-side bevels without thermal distortion or creation of heat affected zone on plate thickness range 8 – 60mm.
The ABM-30 features an infinitely adjustable bevel angle between -70° and +70° and is capable of producing bevels up to 30mm wide.
It also allows for facing in both directions with the milling head depth of 1mm.- Needs no track to travel in both directions with feed speed up to 2m/min.
- 4 Wheels feed drive eliminates hard physical work of the operator.
- Produces double-side bevels without having to flip the plate enhancing safety and reducing material handling time and expense.
- Edge to edge working range.
- Semi-automatic feed stop at end of the metal sheet.
- Variable spindle speed.
- Bevel width up to 30mm (1-3/16″).
- Variable angle -70° to +70°.
- Max. plate thickness up to 60mm.
- Innovative, robust chip protection solution.
Specifications
- Voltage: 1~ 200-240 V, 50/60 Hz
- Power: 2200W
- Spindle Rotational Speed (Without Load): 1800 – 5850rpm
- Feed Speed: 0 – 2m/min
- Bevel Angle (ß, Fig. 1): From -70° to 70°
- Maximum Bevel Width (b, Fig. 1): 30mm
- Sheet Thickness: 8 – 60mm
- Required Ambient Temperature: 5 – 40°C
- Weight: 43kg
(0 reviews) -
GeneralITM ABM-50 Auto Feed Double Sided Beveller, 415V 4Kw Motor, 15-60° Bevel Angle, Max Bevel Width 50mm, 8-80mm Plate Thickness
Features
The ABM 50 produces accurate high-quality double-sided bevels without thermal distortion or creation of heat affected zone on plate thickness range 8-80 mm (15/16″ – 3 1/8″) using a purpose designed milling head with eight 4-sided indexable cutting inserts. Continuously adjustable bevel angle between 15 and 60 degrees (for both top and bottom beveling) requires no tooling to change.
Key features
- Real-time measurement and on-screen display of exact bevel geometry and cutting parameters
- Bevel width up to 50 mm (2″) at 45 degrees
- 180° Inversion allows for creation of a double-sided bevel – no need to rotate or flip heavy material reduces material handling costs and improves shop safety
- Variable spindle speed for work on a variety of steel grades and thicknesses
- Versatile and transportable on its own trolley
- Equipped with milling head including 8 replaceable inserts
- Feedback-controlled overload system
- Create a double-sided bevel eliminating the need to turn a plate over
Remote Control Panel
LCD display that shows exact bevel geometry as well as enables precise adjustment of spindle speed and feed speed to optimize them depending on material grade incl. stainless steel, aluminum etc. The operator can easily adjust and monitor the following parameters:
- Bevel angle
- Bevel width
- Bevel height
- Depth of cut
- Spindle speed
- Feed rate
- Spindle load
Specifications
Power: 6.5 kW
Spindle speed ( no load ): 300 – 800 rpm
Feed speed: 0-1.2 m/min (47″/min)
Bevel angle: 15-60°
Maximum bevel width: 50mm (2″)
Maximum depth of cut allowed per single pass: 6mm (1/4″)
Plate thickness: 8-80mm (5/16″ – 3-1/8″)
Required ambient temperature: 0-40°C (34-104°F)
Weight: 320 kg (700 lbs)(0 reviews) -
Grinding MachinesITM Adjustable Pin Spanner
Universal Pin Spanner.
Pin centers adjustable from 18mm centers to 39mm centers.
Suits most angle grinders and pneumatic tools.(0 reviews) -
Air ToolsITM Air Hammer
Alloyed steel barrel and heat treated piston.
Built in power regulator and trigger control.
Ergonomic design with soft rubber grip.
Includes 5 piece chisel set.Blows Per Minute: 3,000 BPM
Stroke Length: 66mm
Bore Diameter: 19.05mm
Chisel Shank: 10.2mm
Average Air Consumption: 155 L/min
Overall Length: 260mm
Air Inlet: 1/4″
Weight: 2.2kg(0 reviews) -
Air Spray EquipmentITM Air Spray Gun Gravity Feed
Nozzle Size: 1.4mm & 2.0mm
Air Consumption: 120L/min
Pot Size: 600mL(0 reviews) -
Air Spray EquipmentITM Air Spray Gun Suction Feed
Nozzle Size: 1.4mm & 2.0mm
Air Consumption: 120L/min
Pot Size: 1L(0 reviews) -
Geared Head Drilling MachinesITM Aricas Gear Head Bench Drill, 3m, 415V 3PH
Features
Quality Taiwanese Precision Machine for drilling & tapping.
# 3 Morse Taper Spindle.
1120W Three Phase Motor.
Geared Head Tilts 90° right & left.
Forward and Reverse Operation.
Includes 3MT – J6 arbor with drawbar thread M12 x 1.75
No chuck suppliedSpecifications
Drilling Capacity Cast Iron: 40mm
Drilling Capacity Steel: 32mm
Spindle Taper: #3MT
Spindle Nose to Base: 620mm
Spindle to Colomn: 275mm
Diameter of Column: 110mm
Quill Diameter: 75mm
Quill Travel: 120mm
Swing: 550mm
Head Tilting: 90° Right & Left
Head Swivel: 360°
Spindle Speeds (240v) : 100, 220, 380, 760, 1240, 2500rpm
Spindle Speeds (415v) : 50, 100, 190, 380, 670, 1250rpm
Overall Height: 1075mm
Base Dimensions: 450 x 650mm
N.W. / G.W. : 220 / 245kg
Shipping Dimensions : 800 x 780 x 1120mm(0 reviews) -
Magnetic Base Drill AccessoriesITM Axial Float Tapping Heads
Protection against tap breakage ensured by an ultra sensitive and smooth multi-position operating ball-clutch.
Forward and reverse ball drive design transmits rotational power to the tap and disengages smoothly and silently.
Axial float ensures smooth tapping and better thread profile.
Cushioned drive incorporating compression and extension, eliminates the possibility of cross threading during the tapping process, and ensures clean and accurate threads.
A planetary gear reversing mechanism transmits smooth positive reverse to the tap retraction and it retracts 75% faster than it enters.
Accurate depth control by means of its precise neutral mechanism(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BandsawsITM Bandsaw, 170mm Cap, Swivel Head, 1 Speed 240v 1ph, Hyd Down Feed
Features
- Swivel head enables from 0° to 60° mitre cuts.
- Dual mode operation.
– Trigger switch with manual down feed for small quick cuts.
– Control panel with fully adjustable hydraulic down feed & automatic shut-off at end of cut, for cutting larger material. - Incorporated recirculating coolant system.
- Adjustable material stop for repetitive production.
- Safety emergency stop switch.
- 12 months warranty.
- Comes complete with stand & blade.
- Optional brass chip brush & blade tension gauge.
- Made in Taiwan.
Specifications
Motor 1hp Single Phase (240V) Blade Speed Single Speed 80 mpm Blade Size 19mm x 0.9mm x 2110mm Bed Height 895mm Weight 156kg Cutting Capacity Cutting Angle Round Square Rectangle 90° 170mm 170mm 210 x 100mm 45° Right 120mm 110mm  60° Right 70mm 60mm  (0 reviews) -
Bandsaws
ITM Bandsaw, 170mm Cap, Swivel Head, 2 Speed 415v 3ph, Hyd Down Feed
Features
- Swivel head enables from 0° to 60° mitre cuts.
- Dual mode operation.
– Trigger switch with manual down feed for small quick cuts.
– Control panel with fully adjustable hydraulic down feed & automatic shut-off at end of cut, for cutting larger material. - Incorporated recirculating coolant system.
- Adjustable material stop for repetitive production.
- Safety emergency stop switch.
- 12 months warranty.
- Comes complete with stand & blade.
- Optional brass chip brush & blade tension gauge.
- Made in Taiwan.
Specifications
Motor 1hp Three Phase (415V) Blade Speed 2 Speed 40 / 80 mpm Blade Size 19mm x 0.9mm x 2110mm Bed Height 895mm Weight 156kg Cutting Capacity Cutting Angle Round Square Rectangle 90° 170mm 170mm 210 x 100mm 45° Right 120mm 110mm  60° Right 70mm 60mm  (0 reviews) -
BandsawsITM Bandsaw, 170mm Cap, Swivel Head, Variable Speed 240v 1ph, Hyd Down Feed
Features
UNIQUE WG SERIES FEATURES:- Variable speed
- Control panel at front of saw
- Swivel head lock lever at front of saw
STANDARD FEATURES:
- 1 Way swivel head 0° to 60°
- Dual mode operation
- Manual trigger switch, or
- Control panel with hydraulic downfeed
- Industrial quality made in Taiwan
Specifications
Motor 1hp Single Phase (240V) Blade Speed Variable 20-85 mpm Blade Size 19mm x 0.9mm x 2110mm Weight 150kg Cutting Capacity Rectangular 90° 210 x 100mm Square 90° 170 x 170mm Square 45° 110 x 110mm (0 reviews) -
BandsawsITM Bandsaw, 180mm Cap, 4 Speed, 240v 1ph, Horizontal & Vertical Cut
Features
- Horizontal & vertical cutting bandsaw.
- Quick positioning swivel vice enables cuts from 0° to 45°.
- Fully adjustable hydraulic down feed with separate on/off valve & automatic shut-off at end of cut.
- Incorporated recirculating coolant system.
- Non-voltage return ON/OFF switch & emergency stop switch.
- 4 Blade speeds allows precise cutting of different materials.
- Brass chip brush to help extend blade life.
- Adjustable material stop for repetitive production.
- Fitted on base with wheels for easy manoeuvring.
- 12 months warranty.
- Comes complete with blade.
- Made in Taiwan.
Specifications
Motor 1hp Single Phase (240V) Blade Speed 4 Speed 22 / 33 / 45 / 65mpm Blade Size 19mm x 0.9mm x 2360mm Bed Height 572mm Weight 130kg Cutting Capacity Cutting Angle Round Square Rectangle 90° 180mm 180mm 300 x 180mm 45° Right 110mm 110mm 120 x 115mm (0 reviews) -
BandsawsITM Bandsaw, 220mm Cap, Swivel Head, 1 Speed 240v 1ph, Hyd Down Feed
Features
- Swivel head enables from 0° to 60° mitre cuts.
- Dual mode operation.
– Trigger switch with manual down feed for small quick cuts.
– Control panel with fully adjustable hydraulic down feed & automatic shut-off at end of cut, for cutting larger material. - Incorporated recirculating coolant system.
- Brass chip brush to help prevent blade breakage.
- Adjustable material stop for repetitive production.
- Safety emergency stop switch.
- 12 months warranty.
- Comes complete with stand & blade.
- Optional blade tension gauge.
- Made in Taiwan.
Specifications
Motor 1.5hp Single Phase (240V) Blade Speed Single Speed 72 mpm Blade Size 27mm x 0.9mm x 2460mm Bed Height 840mm Weight 216kg Cutting Capacity Cutting Angle Round Square Rectangle 90° 220mm 215mm 260 x 110mm 45° Right 150mm 145mm 155 x 110mm 60° Right 90mm 85mm 95 x 80mm (0 reviews)