TQB BRANDS Workshop Heater 30kW
This TradeQuip “Made for the Trade” Direct-Fired Forced Air Workshop Heater is ideal for workshops, garages and warehouses, reducing concrete freeze and emergency heating. The 38 Litre fuel tank can run for 9 hours on a single fill. It has on-board diagnostics and additional safety features. Ideal for quickly and efficiently heating cold condition workshops, this forced air heater can be used in a variety of commercial and industrial settings and is fuelled by kerosene or diesel. It is a reliable heating solution for an area of approx. 300 square metres and is easy to move and position as required thanks to the ergonomically designed inbuilt handle.
Features
- Burns diesel or kerosene
- Electronic flame control system
- Safety overheat thermostat and pressure switch
- Stainless steel heat exchanger
- Double skinned combustion chamber for thermo-acoustic insulation and safe low surface temperature
- Pre-purge and post-ventilation cycles
- Twist lock fuel cap with cable
Specifications
- Power Output: 30kW – 102,360 Btu/h
- Air Output: 750m3/h
- Motor: 240V/50Hz 230W
- Noise Level: 76dB(A)
- Air Delivery: 720cubic metres per hour
-
Fuel Consumption: 2.4kg/hr
-
Tank Capacity: 38Litres
- Dimensions: 880 x 456 x 590mm
- Nett Weight: 21kg
- Carton: 905 x 420 x 490mm
- Gross Weight: 23kg
Intended Use:
Ideal for space heating, frost protection and condensation control in commercial and industrial workshops, factories, and warehouses.
Related products
-
Fans, Coolers, Heaters & Air ConTQB BRANDS Ventilation Fan 300mm
WARNING: THIS UNIT IS NOT AN EXTRACTION FAN
This TradeQuip “Made for the Trade” Portable Ventilator Fan airs out rooms, circulates air or dries wet areas with a powerful air output of 60m³ per minute. Perfect for drywall, painting, auto body work, welding or any area that needs clean air fast. Features include an ergonomic handle for effortless transport and an aluminium blade with steel housing construction for long lasting durable performance. Complete with 5 metre flexible ducting.
Features
- Aluminium blade and steel housing construction for long lasting performance
- Ergonomic handle for effortless carrying
- Four rubber feet for secure footing on any surface
- Fire resistant flexible PVC exhaust ducting
- Great for dry wall, painting, resurfacing, tile repair, auto body work, welding
- Complete with 5 metre flexible ducting
Specifications
- Diameter: 300mm Alloy Multi Blade Fan
- Motor: 240V/50Hz
- Noise Level: 92dB(A)
- Power: 520W
- Speed: 2800rpm
- Air Delivery: 60m3/per minute
- Static Pressure: 343Pa
- Ingress Protection: IP42 Rated
- Dimensions: 405(H) x 320(W) x 358(L) mm
- Weight: 14kg
- Carton 1 of 2: 420 x 360 x 430mm (Weight: 10.5kg)
- Carton 2 of 2: 320 x 320 x 220mm (Weight: 4kg)
Replacement 5metre Flexible PVC Tube available: Product Code: 1025-5
Replacement 10metre Flexible PVC Tube available: Product Code: 1025-10
Intended Use:
Ventilation fans are designed to remove and dispense contaminated air from industrial workshop processes which generate heat, steam, or other noxious emissions. Can also be used to blow fresh air into a confined work space such as a tank or man hole.
This product is an Industrial Product and not suitable for household use.
(0 reviews) -
Fans, Coolers, Heaters & Air ConTQB BRANDS Evaporative Cooler – 550W
With its compact size, this TradeQuip “Made for the Trade” Portable Evaporative Cooling unit is perfectly suited to smaller work areas, yet still delivers an impressive amount of air output. Huge in performance, this easy-to-operate unit produces up to 18,000 cubic metres of airflow per hour. It is fitted with a rugged, weather-resistant one-piece moulded polyethylene housing that will not crack or leak. The remote control 3-speed fan forces warm air over rigid water soaked evaporative cooling media to reduce ambient temperatures by up to 10°C . The adjustable swing louvre feature offers swinging airflow and can be adjusted to direct the cooled air output to where it is needed.
An evaporative cooler (also known as a desert cooler, swamp cooler or wet air cooler) is a device that cools air through the evaporation of water. These units are well suited for climates where the air is hot and humidity is low. They combine the natural cooling properties of water, with a steady breeze… to lower indoor temperatures. Evaporative cooling will provide a substantial energy savings over refrigerated air units, whilst the simplicity of the design results in low maintenance requirements.
With the substantial savings of energy and the constant changes in the air, a portable evaporative cooler is ideally suited for area cooling or spot cooling of rooms, workshops, factories, laundries, schools, agricultural sheds, and more. (Previous models include product code/s; 1028T)
Water Consumption can increase by 300% due to ‘Relative Humidity’
Note: Evaporative Coolers operate by combining a variable airflow and water evaporation. How much water is used (Water Consumption) depends on the ‘Relative Humidity’ of the day and the fan speed setting to meet the required cooling levels. Relative Humidity (rh) is the ratio of the amount of water (as vapour) actually contained in the air to the maximum amount of water vapour that could be contained at the same temperature (saturation). For example, at 50%(rh), the air contains 50% of the maximum (100%) amount of moisture (water vapour) that it could contain at the same temperature. Therefore when the relative humidity level is low all Evaporative Cooling units may consume a more significant amount of water (up to 300% more) than higher relative humidity ratio conditions.
Features
- One-piece moulded polyethylene housing will not crack and is rust and leak proof
- Environmentally-friendly alternative to traditional reverse cycle A/C
- Cools without chemicals or refrigerants
- Long-term dependability-near maintenance-free operation
- European design synchronous swing function
- Cools where traditional cooling methods are impractical or cost-prohibitive
- Easy to read water level sight tube gauge
- Dual pour in refill water inlet and/or 3/4″ hose fitting for automatic tap refill
- Adjustable water flow and drain valve
- Direct drive
- LCD 24hour timer panel
- Nylon castors for easy portability
- Remote control speed adjustment
Specifications
- Power Unit: 240V 50Hz 550W 10amp plug
- Max. Air Flow: 18,000 m3 per hour
- Noise Level: 70dB(A)
- Fan Diameter: 750mm (3 Blade)
- Speed Control: 3-speed
- Effective Cooling Area: 100-150m2
- Water Consumption; 12-18 Litres per hour
- Water Tank Capacity: 100 Litres
- Castor Wheels: 100mm Dia (2 with brakes)
- Ingress Protection: IP42 Rated
- Dimension: 1510(H) x 1120(W) x 680(D)
- Nett Weight: 58kg
- Carton: 1510 x 1120 x 680mm
- Gross Weight 68kg
NOTE: FREIGHT RATES MAY APPLY!
Intended Use:
This equipment is intended for cooling industrial or trade workshop/office environments. Best used in hot dry climates where the humidity is low, evaporative coolers are generally suitable for areas with dry summers, although their effectiveness will be reduced during the occasional periods of high humidity weather.
This product is an Industrial Product and not suitable for household use.
(0 reviews) -
Fans, Coolers, Heaters & Air ConTQB BRANDS Evaporative Cooler – 200W
With its compact size, this eQuipt “Designed to Deliver” Portable Evaporative Cooling unit is perfectly suited to smaller work spaces, yet still delivers an impressive amount of air output. This easy-to-operate unit produces up to 6,000 cubic metres of airflow per hour. It is fitted with a rugged, weather-resistant one-piece moulded polyethylene housing that will not crack or leak. The remote control 3-speed fan forces warm air over rigid water soaked evaporative cooling media to reduce ambient temperatures by up to 10°C . Adjustable swing louvre feature that offers swinging airflow and allows you to adjust the cooled air output to where you need it.
An evaporative cooler (also known as a desert cooler or wet air cooler) is a device that cools air through the evaporation of water. These units are well suited for climates where the air is hot and humidity is low. They combine the natural cooling properties of water with a steady breeze to lower indoor temperatures. Evaporative cooling will provide a substantial energy savings over refrigerated air units, while the simplicity of the design results in low maintenance requirements.
Compared to other climate control systems available, evaporative air cooling provides the most energy efficient temperature relief for commercial or industrial environments of any scale.
Up to 80% more economical than conventional air conditioning systems, our evaporative cooling systems have delivered proved cost reductions and operational returns for many industrial and mechanical workshops.
With the substantial savings of energy and the constant changes in the air, a portable evaporative cooler is ideally suited for area cooling or spot cooling of rooms, workshops, factories, laundries, schools, agricultural sheds, and more.
Water Consumption can increase by 300% due to ‘Relative Humidity’
Note: Evaporative Coolers operate by combining a variable airflow and water evaporation. How much water is used (Water Consumption) depends on the ‘Relative Humidity’ of the day and the fan speed setting to meet the required cooling levels. Relative Humidity (rh) is the ratio of the amount of water (as vapour) actually contained in the air to the maximum amount of water vapour that could be contained at the same temperature (saturation). For example, at 50% rh, the air contains 50% of the maximum (100%) amount of moisture (water vapour) that it could contain at the same temperature. Therefore when the relative humidity level is low all Evaporative Cooling units may consume a more significant amount of water (up to 300% more) than higher relative humidity ratio conditions.
Features
- One-piece moulded polyethylene housing will not crack and is rust and leak proof
- Environmentally-friendly alternative to traditional reverse cycle A/C
- Cools without chemicals or refrigerants
- Easy to remove cooling pads & filters for quick & easy maintenance
- Long-term dependability-near maintenance-free operation
- European design synchronous swing function
- Cools where traditional cooling methods are impractical or cost-prohibitive
- Easy to read water level sight tube gauge
- Dual pour in refill water inlet and/or 3/4″ hose fitting for automatic tap refill
- Conveniently located drain valve at bottom of tank for easy access
- Direct drive
- LCD 12 hour timer panel
- Nylon castors for easy portability
Specifications
- Power Unit: 220V 50Hz 200W 10amp plug
- Operating Current: 2.4A
- Power Cord Length: 2300mm
- Max. Air Flow: 9,000 m3 per hour
- Noise Level: 70dB(A)
- Speed Control: 3-speed
- Fan Diameter: 520mm 4-blade propeller
- Effective Cooling Area: 50-60m2
- Water Consumption; 5-6 Litres per hour
- Water Tank Capacity: 70 Litres
- Dimension: 1360(H) x 820(W) x 545(D)
- Nett Weight: 33kg
- Gross Weight 36kg
NOTE: FREIGHT RATES MAY APPLY!
Intended Use:
This equipment is intended for cooling industrial or trade workshop/office environments. Best used in hot dry climates where the humidity is low, evaporative coolers are generally suitable for areas with dry summers, although their effectiveness will be reduced during the occasional periods of high humidity weather.
This product is an Industrial Product and not suitable for household use.
(0 reviews) -
Fans, Coolers, Heaters & Air ConTQB BRANDS Portable Industrial Spot Cooling Air Conditioner 4.5kW
TradeQuip “Made for the Trade” Portable Industrial Air Conditioners are designed for economical spot cooling in workshops, service rooms, warehouses and offices especially where other electrical equipment creates a heat load. These TradeQuip Portable Industrial Air Conditioners are completely self-contained and housed within an insulated cabinet. The unit’s exterior is constructed of galvanised steel and protected with a tough powder-coated, polyester finish. All models are equipped standard with heavy-duty castors for easy portability. TradeQuip Portable Industrial Air Conditioners bring in air from an outside source to cool its condenser, cycling hot air to an outside source. This provides a fresh cool air room temperature with high efficiency. Just wheel it in, plug it in and it goes to work immediately, giving high cooling capacity to wherever and at whatever point you require it.
With its compact size, this TradeQuip “Made for the Trade” Portable Industrial Air Conditioning unit is perfectly suited to spot cool work areas, yet still delivers an impressive amount of cooling air output.
The 1032T is the medium unit in size and capacity in the TradeQuip “Made for the Trade” series of portable air conditioners. The 1032T has a small foot print that is ideal for spot cooling people or equipment in a high ambient environment, like in a workshop or office space. The TradeQuip “Made for the Trade” Portable Air Conditioners offer a quick cooling solution with “plug and play” technology that tops the competition with its small size, strong air flow, and easy installation. These portable air conditioners achieve up to 10°C temperature differential across its coil. This means that 39°C input air will instantly produce 29°C output air for spot cooling at a work station which will effectively cool a person and/or workshop equipment within 2-5m of the unit instantly.
The 1032T runs on a 240V/15A circuit with automatic restart after a power failure. The unit comes with a 5-Litre self-contained condensation tank, that is manually emptied. Installation takes less than ten minutes for easy set up.
With the substantial ‘instant’ changes in the air temperature, a portable industrial air conditioner is perfect for cooling hard working people or spot cooling of rooms, workshops, factories, laundries, schools, agricultural sheds, and more.
Features
- Compact yet powerful
- Runs on 240V 15A circuit
- Wide operating range of 18º- 45ºC
- Single duct system for easy installation
- 5 Litre self-contained condensation tank for easy removal and emptying
- Capillary tube construction for simplicity
- Heavy duty compressor with automatic restart and short cycle protection
- Motors and compressors have overload protection
- Durable and long lasting steel construction
- Heavy duty locking castors and handles for easy manoeuvrability
Specifications
- Cooling Capacity: 4.5KW / 15300Btu
- Power Unit: 240V 50Hz 15amp plug
- Rated Power: 2000W
- Rated Current: 9.0A
- Max. Air Flow: 800m3 per hour
- Coverage Area: 35-40m2
- Noise Level: 60dB(A)
- Operating Temperature: 18° – 45°C
- Suction Pressure: 2.5Mpa (Max.)
- Discharge Pressure: 4.5Mpa (Max.)
- Speed Control: 2-speed
- Cooling Pipe: 120mm Dia
- Exhaust Pipe: 200mm Dia
- Condensation Tank Capacity: 8 Litres
- Castor Wheels: 75mm Dia (2 with brakes)
- Ingress Protection: IP42 Rated
- Dimension: 1035(H) x 520(W) x 480(D)
- Nett Weight: 70kg
- Carton 1of2: 1110 x 610 x 570mm
- Carton 2of2: 370 x 350 x 260mm
- Gross Weight 78kg
Intended use:
This appliance is intended for air conditioning industrial or trade workshop/office environments. It is not suitable for any other purpose (such as drying clothes, cooling food, etc.)
This product is an Industrial Product and not suitable for household use.
(0 reviews)