SP TOOLS Non-Contact Digital Tachometer
- LCD display with backlight
- Laser target
- Range: 100-30000rpm,1.7-500rps
- Accuracy: +/-0.1% reading (100.0 -9,999rpm), +/-0.02% reading (10,000 -30,000rpm)
- Auto power off
- 1.5V x 3 AAA batteries
- Protective cover and carrying case
Related products
-
Diagnostic ToolsKLEIN TOOLS Digital Multimeter Electrical Test Kit
- Digital Multimeter measures up to 600V AC/DC voltage, 10A DC current and 2 ohm resistance
- Meter also test batteries, diodes and continuity
- Voltage Tester NCVT-3P has dual-range capabilities to detect from 12 to 1000V AC or 70 to 1000V AC for a broad variety of low-voltage or standard voltage applications
- Bright torch illuminates work area and may be used independent of the NCVT-3P voltage detection function
- ET45 tests AC voltages from 28V to 240V AC at four useful levels aligned with commonly used residential voltages, and DC voltages from 32V to 330V at four common levels
- Built-in test lead holders on back of ET45 hold the leads in one of two positions: one so that they are spaced correctly to test tamper-resistant US-style outlets; and the other for the convenient storage of the test leads
- RT210 detects the most common wiring problems in standard and GFCI receptacles including open ground, reverse polarity, open hot, open neutral and hot/ground reversed
- Receptacle tester works on GFCI outlets and confirms the operation of the ground fault protective device
(0 reviews) -
Diagnostic ToolsINSTRUMENT CHOICE Kestrel 5400 Heat Stress WBGT Meter (Safety Orange)
IC-0854ORA
IC-0854VORA (with Vane Mount)
Please note: These units will come with a “Certificate of Conformance” from Kestrel, however, in general this does not constitute a formal calibration certificate.Features:– Flag warnings via loud buzzer & LED beacon!
– Takes 1 AA battery (instead of 2 AAA)– Battery door is in the back, sealed away from the motherboard, should your battery leak as was common with all the 4000 series. All 5000 battery doors are the same and interchangeable.– Slightly larger and improved higher contrast / resolution screen for any lighting (even sunlight) and easy on your eyes.– Intuitive user-interface screen navigation– Multiple Languages (English, French, German, Spanish)– Scratch and breakage-resistant window– All meters include both options of Red (NV – Night Vision) & White backlights.– Slightly bigger, more robust, though not really noticeable difference.– Roughly 10,000 data points. 4000 series all had under 5000 data points.Measures:– Altitude
– Barometric Pressure– Density Altitude– Dew Point Temperature– Globe Temperature– Heat Stress Index– Naturally Aspirated Wet Bulb Temperature– Relative Humidity– Station Pressure (Absolute Pressure)– Temperature– Thermal Work Limit (TWL)– Wet Bulb Temperature (Psychrometric)– Wet Bulb Globe Temperature (WBGT)– Wind Chill– Wind SpeedHave you seen a cheaper Grey Import online? You need to read this before purchasing:Kestrel meters from the USA do NOT come with a C-Tick, which is required to be imported to AU.Warranty without a C-Tick will not be covered through the AU distributor/Reseller and will not be their responsibility. In order to receive a unit with the required C-Tick, you must purchase it from an authorized Australian retailer/distributor. You cannot purchase these meters in the USA or anywhere else. If a meter is shipped to you from the USA, you risk the meter being destroyed at customs.All Kestrel meters supplied by Instrument Choice come with a C-Tick and we offer the full 5 year warranty(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Diagnostic ToolsINSTRUMENT CHOICE Waterproof Pocket Wind Meter (Anemometer)
Kestrel-1000
Please note: These units will come with a “Certificate of Conformance” from Kestrel, however, in general this does not constitute a formal calibration certificate.The Kestrel 1000 Pocket Wind Meter was the original meter of this type, and it is still going strong. Users will receive accurate current wind speed, average wind speed and maximum wind gust reports while on the go. The only thing that has changed about this reliable model over the years is the aesthetics of the unit.The Kestrel 1000 can easily be switched between mph, km/h, ft/min, m/s, knots and Beaufort measurements. The meter features a one inch impeller mounted on a sapphire jewel bearing to ensure that it starts running at the slightest hint of air.The unit comes with a protective case, a Kestrel Certificate of Conformity, a neck lanyard and a five year manufacturer’s warranty.6 Year Warranty (5 Year Manufacturer Warranty + Bonus 1 Year Instrument Choice Warranty)
What does the Kestrel-1000 Measure?– Current Wind Speed
– Average Wind Speed– Maximum Wind Gust
Features:– Aviation green electroluminescent back light
– Stores maximum and average recordings– Auto shut down after 45 minutes with no activity– One touch clear and reset– Assembled in the U.S.– Data Hold Function– Large LCD screen– Protective Cover– Waterproof and floats– Patented user-replaceable impeller– Neck lanyard
Specifications:– Wind Speed Range: 0.4 to 60.0 m/s, 59 to 11,948 ft/min, 1.0 to 218.0 km/h, 0.8 to 135.0 mph, 0.6 to 118.3 kt and 0 to 12 B
– Display updates every second– Accuracy Rating: Within three percent– Operational Temperature: -10C to 50 C
Power Requirements:– CR2032
Dimensions:– 122 mm x 42 mm x 18 mm(0 reviews) -
Diagnostic ToolsINSTRUMENT CHOICE Multi-Function 4 in 1 Thermometer
The LM-8000A is a four-in-one anemometer, humidity reader, light meter and thermometer. Its rugged and lightweight design was created to make it easy to use in the field. Each of the measurements is highly accurate, and the unit stores maximum and minimum data for each of its functions. The LM-8000As data hold feature makes it easy to use even. The unit has a built-in microprocessor circuit to ensure excellent accuracy and performance.
Each of the units four functions is performed via the usage of the latest high-tech equipment.
What does the LM-8000A measure?
Temperature
Humidity
Wind Speed/Air Velocity
Light
Features
Four-in-one Anemometer, Hygrometer, Thermometer and Light Meter.
Suitable for one-handed operation
Hold button freezes the current reading
Internal temperature and humidity sensor
Stores the minimum and maximum readings for all four settings
Highly accurate low-friction ball vane wheels design
Utilises a standard type K thermocouple outlet
Performance and accuracy are supplied by the built-in microprocessor circuitSpecifications
Measures temperatures from 0 to 50C (Internal Thermistor)
Measures temperatures from -100 to 1300C (Thermocouple input)
Measures light from 0 to 20,000 Lux
Measures relative humidity from 10 to 95 percent
Measures air velocity from 80 to 5910 ft/min, 0.4 to 30.0 m/s, 1.4 to 108.0 km/h, 0.9 to 67.0 mile/h and 0.8 to 58.3 knotsPower Requirements
006P DC 9V batteryMeasurements
156 mm x 60 mm x 33 mmWarranty
24 Months
(0 reviews)
