SP TOOLS Non-Contact Digital Tachometer
- LCD display with backlight
- Laser target
- Range: 100-30000rpm,1.7-500rps
- Accuracy: +/-0.1% reading (100.0 -9,999rpm), +/-0.02% reading (10,000 -30,000rpm)
- Auto power off
- 1.5V x 3 AAA batteries
- Protective cover and carrying case
Related products
-
Diagnostic ToolsINSTRUMENT CHOICE Waterproof Pocket Wind Meter (Anemometer)
Kestrel-1000
Please note: These units will come with a “Certificate of Conformance” from Kestrel, however, in general this does not constitute a formal calibration certificate.The Kestrel 1000 Pocket Wind Meter was the original meter of this type, and it is still going strong. Users will receive accurate current wind speed, average wind speed and maximum wind gust reports while on the go. The only thing that has changed about this reliable model over the years is the aesthetics of the unit.The Kestrel 1000 can easily be switched between mph, km/h, ft/min, m/s, knots and Beaufort measurements. The meter features a one inch impeller mounted on a sapphire jewel bearing to ensure that it starts running at the slightest hint of air.The unit comes with a protective case, a Kestrel Certificate of Conformity, a neck lanyard and a five year manufacturer’s warranty.6 Year Warranty (5 Year Manufacturer Warranty + Bonus 1 Year Instrument Choice Warranty)
What does the Kestrel-1000 Measure?– Current Wind Speed
– Average Wind Speed– Maximum Wind Gust
Features:– Aviation green electroluminescent back light
– Stores maximum and average recordings– Auto shut down after 45 minutes with no activity– One touch clear and reset– Assembled in the U.S.– Data Hold Function– Large LCD screen– Protective Cover– Waterproof and floats– Patented user-replaceable impeller– Neck lanyard
Specifications:– Wind Speed Range: 0.4 to 60.0 m/s, 59 to 11,948 ft/min, 1.0 to 218.0 km/h, 0.8 to 135.0 mph, 0.6 to 118.3 kt and 0 to 12 B
– Display updates every second– Accuracy Rating: Within three percent– Operational Temperature: -10C to 50 C
Power Requirements:– CR2032
Dimensions:– 122 mm x 42 mm x 18 mm(0 reviews) -
Diagnostic ToolsINSTRUMENT CHOICE Moisture Meter For Wood & Building Materials With Thermometer
0560-6062
In addition to material moisture, testo 606-2 also measures air moisture and temperature. In this way, drying conditions can be reliably assessed directly on-site
- Precise measurement of wood moisture with stored characteristics curves for beech, spruce, larch, oak, pine, maple
- Additional characterisitic curves for cement screed, concrete, plaster, anhydrite screed, cement mortar, lime mortar, brick
- Hold function for easy readout of readings
- Display illumination
- Self-test function
- Protective cap for safe storage
- Including wrist strap and belt holder
- Measurement of temperature and humidity in ambient air
- Air humidity measurement with the long-term stable Testo humidity sensor
- Incl. dewpoint calculation and wet bulb
Storage temperature: -40 to +70 C
Operating temperature: -10 to +50 C
Battery type: 2 batteries Type AAA
Battery life: 130 h
Weight: 90 g
Dimensions: 119 x 46 x 25 mmProbe type NTC
Meas. range: -10 to +50 C
Accuracy: 0.5 C
Resolution: 0.1 CProbe type Conductive measurement cell
Meas. Range: 0 to 50%
Accuracy: 1%
Resolution: 0.1
Probe type: humid. sensor, cap.
Meas. Range: 0 to 100 %RH
Accuracy: 2.5 %RH (5 to 95 %RH)
Resolution: 0.1 %RH(0 reviews) -
Diagnostic ToolsINSTRUMENT CHOICE Data Logging Particulate Monitor sensor with the Series 500 Handheld
IC-PM-500
This kit comes supplied with the IC-PM and the IC-HH S500L handheld monitor. The IC-PM is Aeroqual’s portable particulate monitor for accurate and simultaneous measurement of PM10 and PM2.5 in ambient outdoor and indoor environments. Whilst the Series 200 will allow you to view these results in real time and if desired purchase additional sensor heads to monitor other gases.
Series 500 Lithium Air Quality Portable Monitor features and specifications:Features:– Simple to use, easy to maintain, multiple applications.– Interchangeable gas sensor heads.– Field replaceable long life Lithium battery (up to 8 hours).– Minimum, maximum and average readings.Specifications:– Measurement units: Gas: ppm or mg/m3 | Humidity: % | Temperature C or F– Reading functions: Instant, minimum, maximum, average– Sensor head: Interchangeable, replaceable– Display status indicators: Battery, sensor, standby– Sensor calibration: Zero and gain calibration– Analog output: 0-5 V– Digital Interface: RS-232 to USB– Data logging: Up to 8,188 records (2706 incl. Temp/RH)– PC data logging (Windows 7, 8, XP): Software and data cable supplied. Link data to a specific location and monitor.– Clock function: Real time– Power supply: 12V DC (power adaptor/charger supplied 100-250 V AC)– Rechargeable battery: Lithium polymer 12 V DC 2700 mA/h– Enclosure material and rating: PC and ABS; IP20 and NEMA 1 equivalent– Size (with sensor head): (L x W x D) 195 x 122 x 54 (mm); 7 x 4 x 2 (in)– Environmental operating conditions: Temperature: -5 C to 45 C/Humidity: 0 to 95 % non-condensing– Temperature & Humidity sensor: Range – 40 C to 124 C (- 40 F to 255 F); Range 0 to 100 % RHParticulate Matter Sensor features and specifications:The IC-PM is Aeroqual’s portable portable particulate monitor for accurate and simultaneous measurement of PM10 and PM2.5 in ambient outdoor and indoor environments. Compatible with Aeroqual’s Series 200/300/500 air quality monitors, the portable particulate monitor will output particulate matter (PM) measurements for PM10 and PM2.5 in real-time.– Range: 0.000 to 1.000 mg /m3– Measurement Parameters: PM2.5 and PM10– Sensor Type: Laser particle counter– Minimum Detection Limit: 0.001 mg/m3– Accuracy of Factory Calibration: +/- (0.002 mg/m3 + 15 % of reading)– Resolution: 0.001 mg/3– Response Time: 5 Seconds– Temp: 0 to 40C– Relative Humidity: 0 to 90% non-condensating(0 reviews) -
Diagnostic ToolsINSTRUMENT CHOICE WR-3 Plus Wireless Anemometer Kit
WR3PKit
The WR-3 Plus Wireless Anemometer is a reliable and stable solution for measuring wind speed in a variety of industries, including construction, marine, film production, scaffolding, and wind farms. With a range of up to 500m, this wireless anemometer offers real-time measurement of wind speed, temperature, and air pressure.One of the key features of the WR-3 Plus is its instant wind speed alarm. Users can set a wind speed warning limit based on local operation safety standards, and the device will trigger an audible and visual alarm if the limit is reached. This feature is especially important in the construction and crane industries, where windy conditions can pose a potential danger to workers and equipment. With the WR-3 Plus, multiple stakeholders can be notified on-site through the device’s unique wireless address and connection to several displays.– Ultra-long wireless transceiver range of up to 500m
– Audible and visual wind speed alarm– Data recording for up to 1 year– Measurements for wind speed, temperature, and air pressure– Sensor battery life of up to 3 years– Waterproof and impact resistant design with an IP67 rating– Fast and secure magnetic installation kitIn addition to its real-time measurement capabilities, the WR-3 Plus also offers data recording for up to 1 year. This is made possible by the device’s 64MB built-in memory and impressive battery life. The recorded data can be easily exported in Excel format for further analysis, making it a valuable tool for tracking and improving safety measures in various industries.The WR-3 Plus also boasts a user-friendly interface with a large, backlit LCD display. This display clearly indicates live weather data in various units of measurement, including live wind speed, average wind speed (with selectable averaging), maximum wind speed, ambient temperature, and atmospheric pressure. Users can also view hourly wind records and historical bar charts from the past 12 hours on different pages.– Large LCD backlit display with user-friendly interface
– Ability to view live wind speed in various units of measurement– Option to view average wind speed with selectable averaging– Ability to view maximum wind speed– Ability to view ambient temperature– Beaufort bar graph for visual representation of wind strength– Wind chill calculation for temperature and wind speed combination– Atmospheric pressure displayOther features of the WR-3 Plus include its fast and secure magnetic installation kit, IP67 waterproof and impact resistant design, and up to 3 years of sensor battery life. Overall, the WR-3 Plus is a reliable and essential tool for ensuring safety in windy conditions and a variety of industries.
Warranty: 2 Years (1 Year Manufacturer Warranty + Bonus 1 Year Instrument Choice Warranty)
Applications include:– Construction and cranes
– Marine, ports, and offshore operations– Film production and outdoor entertainment– Scaffolding and temporary structure use– Rigging and communications industry– Wind farms and turbines
SpecificationsWind Speed Sensor:– Unit: m/s, knots, MPH, km/hr
– Range: 0.3 to 50 m/s– Resolution: 0.1 m/s/0.1 knots/0.1 MPH/0.1 km/hr– Accuracy: 2% FS
Temperature Sensor:– Unit: C/F
– Range: -30C to 60C– Resolution: 0.1C/0.1F– Accuracy: 1C
Atmospheric Pressure Sensor:– Unit: hPa/mmHg/bar
– Range: 500 to 1100 hPa– Resolution: 1 hPa/0.1 mmHg/0.001 bar– Accuracy: 4 hPa
Wireless Sensor:– Frequency: 868MHz(default), 915MHz
– Distance: Max 500m* (depends on the applied environment)– Data rate: Every 2 seconds– Power supply: 1x 3.6V 18505 Lithium battery– Waterproof rating: IP67– Weight: 406g– Dimensions: 262.5 x 183.5 x32mm
Data Logger:– Receiver buzzer: > 80dB
– Built-in memory: 64MB– Output: .xlxs, .xls– Data logger” wind speed, temperature, atmospheric pressure– Logging interval: 2s, 5s, 10s, 1min, 5 mins, 10 mins, 60 mins– Power supply: 3x 1.5V AA battery, Micro USB port– Dimensions: 189.6 x 75.6 x 36.3mm– Weight: 205g(0 reviews)