SP TOOLS Digital Multimeter – Deluxe Automotive – 0.8 to 100V
FEATURES
- Measures DC/AC voltage, DC/AC current (max 10A), resistance, capacitance, frequency (electrial & electronic), continuity & diode check
- True-RMS measurements
- Large 6000 count digital LCD display with backlight
- Rugged design for heavy duty use
- Auto power off
- Auto ranging
- Hold function
- Includes probe test leads
- Cat III 1000V
SPECIFICATIONS
- DC voltage detection: 2V / 20V / 100V
- Resistance detection: 2000 Ω / 20K Ω / 200K Ω / 2M Ω / 20M Ω
- On-off detection: 2000 Ω / beep less than 50 Ω
Related products
-
Diagnostic ToolsSP TOOLS Digital Multimeter with Temperature Gauge – Pocket Size
- 2000 counts digital display
- Safety Design Cat 3 600v
- Non-contact ACV detection
- Data hold
- Auto ranging
- Type K temperature input
- Continuity, diode test, resistance
- Auto power off with low battery indicator
- Pocket sized
(0 reviews) -
Diagnostic ToolsINSTRUMENT CHOICE Waterproof Pocket Wind Meter (Anemometer)
Kestrel-1000
Please note: These units will come with a “Certificate of Conformance” from Kestrel, however, in general this does not constitute a formal calibration certificate.The Kestrel 1000 Pocket Wind Meter was the original meter of this type, and it is still going strong. Users will receive accurate current wind speed, average wind speed and maximum wind gust reports while on the go. The only thing that has changed about this reliable model over the years is the aesthetics of the unit.The Kestrel 1000 can easily be switched between mph, km/h, ft/min, m/s, knots and Beaufort measurements. The meter features a one inch impeller mounted on a sapphire jewel bearing to ensure that it starts running at the slightest hint of air.The unit comes with a protective case, a Kestrel Certificate of Conformity, a neck lanyard and a five year manufacturer’s warranty.6 Year Warranty (5 Year Manufacturer Warranty + Bonus 1 Year Instrument Choice Warranty)
What does the Kestrel-1000 Measure?– Current Wind Speed
– Average Wind Speed– Maximum Wind Gust
Features:– Aviation green electroluminescent back light
– Stores maximum and average recordings– Auto shut down after 45 minutes with no activity– One touch clear and reset– Assembled in the U.S.– Data Hold Function– Large LCD screen– Protective Cover– Waterproof and floats– Patented user-replaceable impeller– Neck lanyard
Specifications:– Wind Speed Range: 0.4 to 60.0 m/s, 59 to 11,948 ft/min, 1.0 to 218.0 km/h, 0.8 to 135.0 mph, 0.6 to 118.3 kt and 0 to 12 B
– Display updates every second– Accuracy Rating: Within three percent– Operational Temperature: -10C to 50 C
Power Requirements:– CR2032
Dimensions:– 122 mm x 42 mm x 18 mm(0 reviews) -
Diagnostic ToolsKLEIN TOOLS Digital Multimeter Electrical Test Kit
- Digital Multimeter measures up to 600V AC/DC voltage, 10A DC current and 2 ohm resistance
- Meter also test batteries, diodes and continuity
- Voltage Tester NCVT-3P has dual-range capabilities to detect from 12 to 1000V AC or 70 to 1000V AC for a broad variety of low-voltage or standard voltage applications
- Bright torch illuminates work area and may be used independent of the NCVT-3P voltage detection function
- ET45 tests AC voltages from 28V to 240V AC at four useful levels aligned with commonly used residential voltages, and DC voltages from 32V to 330V at four common levels
- Built-in test lead holders on back of ET45 hold the leads in one of two positions: one so that they are spaced correctly to test tamper-resistant US-style outlets; and the other for the convenient storage of the test leads
- RT210 detects the most common wiring problems in standard and GFCI receptacles including open ground, reverse polarity, open hot, open neutral and hot/ground reversed
- Receptacle tester works on GFCI outlets and confirms the operation of the ground fault protective device
(0 reviews) -
Diagnostic ToolsSP TOOLS CAN OBDII/EOBD Scanner Code Reader
- Designed to work with OBDII compliant vehicles including next generation protocol, Control Area Network (CAN). Operation relies on access being provided by the vehicle manufacturer, for which legislation was introduced in Australia & NZ 2006, USA – 1996, Europe (petrol) 2001, Europe (diesel) 2004.
Note: This model is not compatible with Japanese manufactured vehicles using JOBD protocol. - Reads and clears generic and manufacturer specific diagnostic trouble codes (DTC’s) and turns off check engine light
- Supports multiple trouble code requests: Generic codes, pending codes and manufacturer specific codes
- Code definitions are displayed on unit screen
- Reviews the emission readiness status of OBDII Monitors
- Determines malfunction indicator lamp (MIL) status
- Retrieves VIN (Vehicle Identification No.) on 2002 and newer vehicles that supports Mode 9
- Reviews the live data on unit screen
- Easy to use with one plug in, highly reliable and accurate
- Stand-alone unit with no need for an additional laptop/computer to operate
- Small in size and comfortably fits in the palm of your hand
- Unit updates via internet by USB cable
- Software CD with over 10,000 DTC definitions included
- No batteries needed as the unit is powered via OBD2 cable
(0 reviews) - Designed to work with OBDII compliant vehicles including next generation protocol, Control Area Network (CAN). Operation relies on access being provided by the vehicle manufacturer, for which legislation was introduced in Australia & NZ 2006, USA – 1996, Europe (petrol) 2001, Europe (diesel) 2004.