[email protected]
189 Gurrundah Rd, Goulburn NSW 2580
Call us:(02) 4823 5655

SP TOOLS Digital Insulation Tester

Uses a high voltage, low current DC charge to measure the resistance within wires and motor windings to identify current leakage and faulty or damaged insulation

 

FEATURES

  • Test voltage ranges: 125V, 250V, 500V, 1000V
  • Measures: Voltage up to 1000V DC, 750V AC  and resistance up to 4000MΩ
  • Min/Max record mode
  • Live circuit detection prevents insulation tests if voltage >30V
  • Auto null of test lead resistance
  • 1mA output current on insulation test
  • 200mA short circuit on continuity range
  • Large digital LCD dual display with backlight
  • Rugged design for heavy duty use
  • Lock down test button for hands free use
  • Auto power off
  • Hold function
  • CAT III 1000V

In Stock
SKU: SP62018 Categories: , , , ,

Related products

    Diagnostic Tools

    INSTRUMENT CHOICE Scarlet Heat Stress Detector
    IC-TWL-1S
    Please note; These units do not come with formal calibration certificates, if required please contact us to ensure the correct certificate can be provided.
    Features:

    – Dash board: Colorful LCD backlight tells you the risk level based on the TWL value. Work-rest schedule and fluid intake are integrated into the display. A countdown timer shows the time remaining before a recommended rest.

    – Cup anemometer captures winds from any direction. You do not have to manually decide the wind direction before measuring the wind speed. Compared to the impeller, wind cup is not restricted to the direction of the wind. It considers all the horizontal components of winds that move the anemometer. A silicone pad covers the top of the bearing to prevent it from dust accumulation.
    – Data Logger : TWL-1S can record data with configurable sampling rate. PC side software helps download the data for further analysis using other analytical tools, and it also synchronizes the date and time of the device with PC.
    – Optimised Globe: TWL theory considers Mean Radiant Temperature (MRT), the most important parameter governing human energy balance. MRT can be derived from globe temperature (GT) measured by the black-bulb thermometer. The smaller the surface area of the black bulb, the greater the effect of the air temperature and air velocity is, thus causing inaccuracy of the calculation of MRT. Therefore, it needs a modifying formula to adjust it to the standard globe bulb with a diameter of 15 cm. The 7.5 cm globe bulb is the optimal size for a portable based on our research and experiments.
    – Sensor Protection : Delicate temperature and humidity sensor are well protected by a replaceable polypropylene (PP) filter in a solid shield, exempted the sensors from dust damage and external strike. A silicone pad protects the mechanism of anemometer from dust.
    Measurement specifications:

    – Air Temperature (Range): 0-60 C

    – Air Temperature (Accuracy): 0.6 C
    – Globe Bulb Indoor (Range) 0-80 C
    – Globe Bulb Indoor (Accuracy): 1.0 C (15…40 C); 1.5 C (others)
    – Globe Bulb Outdoor (Range): 0-80 C
    – Globe Bulb Outdoor (Accuracy): 1.5 C (15…40 C); 2.0 C (others)
    – Relative Humidity (Range): 5-95 %rh
    – Relative Humidity (Accuracy): 3% (at 25 C; 10…90 %rh) 5% (others)
    – Wind Speed (Range): 0.5 – 10 m/s
    – Wind Speed (Accuracy): (2% of reading + 0.2) m/s
    Meter specifications:

    – Operating range electronics: -1060 C

    – Accuracy at 23 5 C: 1.0 %rh / 0.2 K
    – Power supply / consumption: 4 AAA 3V battery, power supply 4 mA consumption without lighting
    – Probe protection: Polypropylene plastic cage
    – Calibration / adjustment: Scarlet calibration kit
    – Measurement interval: 2 seconds
    – Back-light: with Back-light
    – Alarm indicators: Yes
    – Battery indicator: Low Batt. Display
    – Software: Scarlet TWLIT
    – Risk level indicator: Yes. 3 color LCD backlight: red (risk), yellow (med), green (safe)
    – Data logger: Yes. Min data rate 10 min, 2,000 data.
    – Connection Interface: Mini USB (UART)
    – Enclosure material: ABS
    (0 reviews)
    Add to Quote
  • Diagnostic Tools

    INSTRUMENT CHOICE Multi-Function 4 in 1 Thermometer
    The LM-8000A is a four-in-one anemometer, humidity reader, light meter and thermometer. Its rugged and lightweight design was created to make it easy to use in the field. Each of the measurements is highly accurate, and the unit stores maximum and minimum data for each of its functions.

    The LM-8000As data hold feature makes it easy to use even. The unit has a built-in microprocessor circuit to ensure excellent accuracy and performance.

    Each of the units four functions is performed via the usage of the latest high-tech equipment. 

    What does the LM-8000A measure?
    Temperature
    Humidity
    Wind Speed/Air Velocity
    Light
    The Instrument Choice "1 + 1 Year Extended Warranty" is provided free of charge on this item, giving you a 2 year warranty (1 year manufacturers warranty plus the exclusive 1 bonus year Instrument Choice Warranty). The extended warranty is not valid for the batteries or if the units calibration has had normal deviation. (This extended warranty is valid for purchases of this item made after 28-8-15).

    Features
    Four-in-one Anemometer, Hygrometer, Thermometer and Light Meter.
    Suitable for one-handed operation
    Hold button freezes the current reading
    Internal temperature and humidity sensor
    Stores the minimum and maximum readings for all four settings
    Highly accurate low-friction ball vane wheels design
    Utilises a standard type K thermocouple outlet
    Performance and accuracy are supplied by the built-in microprocessor circuit

    Specifications
    Measures temperatures from 0 to 50C (Internal Thermistor)
    Measures temperatures from -100 to 1300C (Thermocouple input)
    Measures light from 0 to 20,000 Lux 
    Measures relative humidity from 10 to 95 percent
    Measures air velocity from 80 to 5910 ft/min, 0.4 to 30.0 m/s, 1.4 to 108.0 km/h, 0.9 to 67.0 mile/h and 0.8 to 58.3 knots 

    Power Requirements
    006P DC 9V battery

    Measurements
    156 mm x 60 mm x 33 mm 

    Warranty

    24 Months

    (0 reviews)
    Add to Quote
  • Diagnostic Tools

    INSTRUMENT CHOICE Data Logging Particulate Monitor sensor with the Series 500 Handheld

    IC-PM-500

    This kit comes supplied with the IC-PM and the IC-HH S500L handheld monitor. The IC-PM is Aeroqual’s portable particulate monitor for accurate and simultaneous measurement of PM10 and PM2.5 in ambient outdoor and indoor environments. Whilst the Series 200 will allow you to view these results in real time and if desired purchase additional sensor heads to monitor other gases.

    Series 500 Lithium Air Quality Portable Monitor features and specifications:
    Features:
    – Simple to use, easy to maintain, multiple applications.
    – Interchangeable gas sensor heads.
    – Field replaceable long life Lithium battery (up to 8 hours).
    – Minimum, maximum and average readings.
    Specifications:
    – Measurement units: Gas: ppm or mg/m3 | Humidity: % | Temperature C or F
    – Reading functions: Instant, minimum, maximum, average
    – Sensor head: Interchangeable, replaceable
    – Display status indicators: Battery, sensor, standby
    – Sensor calibration: Zero and gain calibration
    – Analog output: 0-5 V
    – Digital Interface: RS-232 to USB
    – Data logging: Up to 8,188 records (2706 incl. Temp/RH)
    – PC data logging (Windows 7, 8, XP): Software and data cable supplied. Link data to a specific location and monitor.
    – Clock function: Real time
    – Power supply: 12V DC (power adaptor/charger supplied 100-250 V AC)
    – Rechargeable battery: Lithium polymer 12 V DC 2700 mA/h
    – Enclosure material and rating: PC and ABS; IP20 and NEMA 1 equivalent
    – Size (with sensor head): (L x W x D) 195 x 122 x 54 (mm); 7 x 4 x 2 (in)
    – Environmental operating conditions: Temperature: -5 C to 45 C/Humidity: 0 to 95 % non-condensing
    – Temperature & Humidity sensor: Range – 40 C to 124 C (- 40 F to 255 F); Range 0 to 100 % RH
    Particulate Matter Sensor features and specifications:
    The IC-PM is Aeroqual’s portable portable particulate monitor for accurate and simultaneous measurement of PM10 and PM2.5 in ambient outdoor and indoor environments. Compatible with Aeroqual’s Series 200/300/500 air quality monitors, the portable particulate monitor will output particulate matter (PM) measurements for PM10 and PM2.5 in real-time.
    – Range: 0.000 to 1.000 mg /m3
    – Measurement Parameters: PM2.5 and PM10
    – Sensor Type: Laser particle counter
    – Minimum Detection Limit: 0.001 mg/m3
    – Accuracy of Factory Calibration: +/- (0.002 mg/m3 + 15 % of reading)
    – Resolution: 0.001 mg/3
    – Response Time: 5 Seconds
    – Temp: 0 to 40C
    – Relative Humidity: 0 to 90% non-condensating

     

    (0 reviews)
    Add to Quote
  • Diagnostic Tools

    SP TOOLS Videoscope – Smart Tool Attachment – Suits SP61170

    TURN YOUR SP SMART TOOL INTO A VIDEOSCOPE

    With forward and side facing cameras this probe allows technicians to quickly and easily inspect engine and vehicle components, without major disassembly.

     

    FEATURES

    • Dimmable front & Side Camera Lights
    • Camera Diameter: 5.5mm
    • View Angle: 60°
    • Resolution: 1280x720Frame Rate: 30fps
    • Flexible Camera Tube Length: 1m
    (0 reviews)
    Add to Quote