SP TOOLS Digital Automotive Multimeter
- Set includes: Test Leads , K-type Temperature Probe, Inductive Pick-up, 9v Battery & Canvas Bag
- RPM measurement for 2–10 cylinder automotive engines using the inductive pick-up
- Oversized high contrast 9999 count LCD display with backlight
- 14 functions including DC/AC voltage, DC/AC current (max 20A), resistance, RPM (tach), dwell angle, duty cycle frequency, MS-pulse, temperature (ºC/ºF), capacitance, continuity & diode check
- Read pulse duty cycle & dwell angle for electronic fuel injection feedback carburettors and ignition
- Fused current inputs & overload protection on all ranges
- Measure milliseconds pulse width to test on-time of fuel injectors, idle air control motors & electronic transmission controls
- Data hold and relative functions
- Auto power off
- Auto ranging
- Back light
- Safety design cat 3 & cat 4
Related products
-
Diagnostic ToolsSP TOOLS Mini-Infrared Thermometer
- LCD display with backlight
- Single dot laser targeting
- Low battery indication
- Auto power off
- -20°C / 270°C Range (-4° F – 518°F)
* NOTE: NOT SAFE FOR USE ON HUMANS OR ANIMALS
(0 reviews) -
Diagnostic ToolsSP TOOLS Multi-Function Smart Tool with Wifi & Built-In Printer – 5 Tools in 1
SMART AUTOMOTIVE TESTING
The SP Smart Tool is a multi-function Android tablet based scan tool with an easy to use and understand user interface, capable of running sophisticated whole system diagnosis on more than 100 car brands throughout Europe, America, Asia and China and offers support to more than 20 common maintenance special functions, CAN FD, DoIP and various diagnosis protocols. Combining multiple professional tools into one, this SP Smart Tool is an essential tool for any modern professional workshop. The built-in printer allows technicians to print out hard copies of test reports on the go and the massive 64GB of on-board storage allows users to save test reports for later viewing and comparison.
5 TOOLS IN 1
BATTERY ANALYSER
- Two test modes – Out-of-car Inspection and In-car Inspection
- Analyses battery health and calculates the actual cold starting ability of the battery
- Battery bar code scanning for rapid test setup
- Battery matching enables you to perform a resetting operation on the monitoring unit of the vehicle’s battery, in which the original low battery fault information will be cleared and battery matching will be done
- Test results based on CA, CCA, BCI, MCA, JIS, SAE, EN, GB, DIn & IEC standards
- Built-in printing functionality provides instant hard copy test results
TPMS TESTER (Tyre Pressure Monitoring System)
- Provides the ability to activate most OEM/Universal TPMS sensors, reprogram sensor IDs, retrieve/clear TPMS DTCs and relearn sensors, helping technicians quickly find out faulty TPMS and turn off MILs
- Ultra wide coverage – Covers more than 98% of vehicles with the Tyre Pressure Monitoring System
- Supports 315MHz/433MHz tyre pressure sensor activation and matching learning
- Reads tyre pressure data, including pressure, tyre temperature, battery status and more
- Can read/copy/write sensor ID value.
DIAGNOSTICS TESTER
- Connects via DLC (Data Link Connector) and quickly accesses all the electronic control units of the vehicle and generates a detailed report about vehicle health
- Compare pre- and post- repair reports and easily identify which DTC’s are cleared and which remain unfixed
- Reads and clears generic and manufacturer specific diagnostic trouble codes (DTC’s) and turns off check engine light
- Identifies which systems are installed on the vehicle
- Views and captures (records) real-time Live Data and saves the data in text format
- 3 Types of display modes available for data viewing, allowing you to view various types of parameters in the most suitable way – Text in list format, waveform graphs or in a merged graph for easy data comparison
- Update vehicle diagnostic software and APK
- Able to record diagnostic data that can serve as valuable information to help you in troubleshooting vehicle problems
- Able to run actuation test to access vehicle-specific subsystem and component tests
VEHICLE MAINTENANCE
This module provides an easy dial to quickly access the most commonly performed service functions as follows:
- Oil Reset Service
- Electronic Parking Brake Reset
- Steering Angle Calibration
- ABS Bleeding
- Gear Learning
- IMMO Service
- Injector Coding
- TPMS (Tyre Pressure Monitor System) Reset
- Battery Maintenance System (BMS) Reset
- Diesel Particulate Filter (DPF) Regeneration
- Electronic Throttle Position Reset
- AFS (Adaptive Front-lighting System) Reset
- AdBlue Reset (Diesel Engine Exhaust Gas Filter)
- Gearbox Matching
- Sunroof Initialisation
- Suspension Calibration
- EGR Adaption
- Windows Calibration
- Seats Calibration
- Tyre Reset
- Language Change
- A/F Reset
- Coolant Bleed
- Transport Mode
- NOx Sensor Reset
- Stop/Start Reset
VIDEOSCOPE SUPPORT
(Available as an attachment – SP61173*)
With forward and side facing cameras this probe allows technicians to quickly and easily inspect engine and vehicle components, without major disassembly
KIT INCLUDES
-
- SP Smart Tool
- Diagnostic cable – DLC
- Battery cable clamps
- USB Type-C cable
- 12v auxiliary power outlet cable
- OBD I adaptor box
- Non-16pin adaptor cable kit
All Housed in a heavy duty Blow Mold Case
SPECIFICATIONS
- Operating system: Android 10
- Memory: 4GB
- Storage: 64GB
- Screen: 5.99” Capacitive touch screen
- Resolution:720 x 1440 pixels
- Camera: Rear-facing 8.0MP camera
- Wi-Fi: 2.4GHz/5GHz dual band
- Battery: 4500mAh/7.6v
- Working temperature: 0 to 45°c
- Storage temperature: -10 to 60°c
CONNECTIVITY
- DB15 Diagnostic connector
- USB Type A port x 1 + USB Type C port
- Circular connector for battery tester clamps
- OBD-II, OBD-I (Includes adaptor cables)
- Wi-fi internet connection
(0 reviews) -
Diagnostic ToolsINSTRUMENT CHOICE Moisture Meter For Wood & Building Materials With Thermometer
0560-6062
In addition to material moisture, testo 606-2 also measures air moisture and temperature. In this way, drying conditions can be reliably assessed directly on-site
- Precise measurement of wood moisture with stored characteristics curves for beech, spruce, larch, oak, pine, maple
- Additional characterisitic curves for cement screed, concrete, plaster, anhydrite screed, cement mortar, lime mortar, brick
- Hold function for easy readout of readings
- Display illumination
- Self-test function
- Protective cap for safe storage
- Including wrist strap and belt holder
- Measurement of temperature and humidity in ambient air
- Air humidity measurement with the long-term stable Testo humidity sensor
- Incl. dewpoint calculation and wet bulb
Storage temperature: -40 to +70 C
Operating temperature: -10 to +50 C
Battery type: 2 batteries Type AAA
Battery life: 130 h
Weight: 90 g
Dimensions: 119 x 46 x 25 mmProbe type NTC
Meas. range: -10 to +50 C
Accuracy: 0.5 C
Resolution: 0.1 CProbe type Conductive measurement cell
Meas. Range: 0 to 50%
Accuracy: 1%
Resolution: 0.1
Probe type: humid. sensor, cap.
Meas. Range: 0 to 100 %RH
Accuracy: 2.5 %RH (5 to 95 %RH)
Resolution: 0.1 %RH(0 reviews) -
Diagnostic ToolsSP TOOLS Multimeter Dual Test Lead Set – Alligator & Standard Probe
SET INCLUDES:
- Alligator Clip Test Lead Set
- Standard Probe Test Lead Set
- Suits all SP Multimeters
ALLIGATOR CLIP TEST LEAD SET TO BANANA PLUG
- Insulated finger guarded alligator clips for easy application
- Silicon rubber insulated cable – 1m
- CAT III 1000V, 10A
STANDARD PROBE TEST LEAD SET TO BANANA PLUG
- Multi-rated probe tips with removable cap (CAT IV 600A) are insulated leaving only 2mm of exposed metal to prevent inadvertent bridging of live conductors and accidental short circuits
- Silicon rubber insulated cable – 1m
- CAT III 1000V, 10A
(0 reviews)