office@stwholesale.com.au
189 Gurrundah Rd, Goulburn NSW 2580
Call us:(02) 4823 5655

SP TOOLS Digital Automotive Multimeter

  • Set includes: Test Leads , K-type Temperature Probe, Inductive Pick-up, 9v Battery & Canvas Bag
  • RPM measurement for 2–10 cylinder automotive engines using the inductive pick-up
  • Oversized high contrast 9999 count LCD display with backlight
  • 14 functions including DC/AC voltage, DC/AC current (max 20A), resistance, RPM (tach), dwell angle, duty cycle frequency, MS-pulse, temperature (ºC/ºF), capacitance, continuity & diode check
  • Read pulse duty cycle & dwell angle for electronic fuel injection feedback carburettors and ignition
  • Fused current inputs & overload protection on all ranges
  • Measure milliseconds pulse width to test on-time of fuel injectors, idle air control motors & electronic transmission controls
  • Data hold and relative functions
  • Auto power off
  • Auto ranging
  • Back light
  • Safety design cat 3 & cat 4

In Stock
SKU: SP62011 Categories: , , , ,

Related products

  • Diagnostic Tools

    SP TOOLS Multimeter Dual Test Lead Set – Alligator & Standard Probe

    SET INCLUDES:

    • Alligator Clip Test Lead Set
    • Standard Probe Test Lead Set
    • Suits all SP Multimeters

    ALLIGATOR CLIP TEST LEAD SET TO BANANA PLUG

    • Insulated finger guarded alligator clips for easy application
    • Silicon rubber insulated cable – 1m
    • CAT III 1000V, 10A

    STANDARD PROBE TEST LEAD SET TO BANANA PLUG

    • Multi-rated probe tips with removable cap (CAT IV 600A) are insulated leaving only 2mm of exposed metal to prevent inadvertent bridging of live conductors and accidental short circuits
    • Silicon rubber insulated cable – 1m
    • CAT III 1000V, 10A
    (0 reviews)
    Add to Quote
  • Diagnostic Tools

    SP TOOLS Digital Multimeter – Deluxe Automotive – 0.8 to 100V

    FEATURES

    • Measures DC/AC voltage, DC/AC current (max 10A), resistance, capacitance, frequency (electrial & electronic), continuity & diode check
    • True-RMS measurements
    • Large 6000 count digital LCD display with backlight
    • Rugged design for heavy duty use
    • Auto power off
    • Auto ranging
    • Hold function
    • Includes probe test leads
    • Cat III 1000V

    SPECIFICATIONS

    • DC voltage detection: 2V / 20V / 100V
    • Resistance detection: 2000 Ω / 20K Ω / 200K Ω / 2M Ω / 20M Ω
    • On-off detection: 2000 Ω / beep less than 50 Ω
    (0 reviews)
    Add to Quote
  • Diagnostic Tools

    INSTRUMENT CHOICE Data Logging Particulate Monitor sensor with the Series 500 Handheld

    IC-PM-500

    This kit comes supplied with the IC-PM and the IC-HH S500L handheld monitor. The IC-PM is Aeroqual’s portable particulate monitor for accurate and simultaneous measurement of PM10 and PM2.5 in ambient outdoor and indoor environments. Whilst the Series 200 will allow you to view these results in real time and if desired purchase additional sensor heads to monitor other gases.

    Series 500 Lithium Air Quality Portable Monitor features and specifications:
    Features:
    – Simple to use, easy to maintain, multiple applications.
    – Interchangeable gas sensor heads.
    – Field replaceable long life Lithium battery (up to 8 hours).
    – Minimum, maximum and average readings.
    Specifications:
    – Measurement units: Gas: ppm or mg/m3 | Humidity: % | Temperature C or F
    – Reading functions: Instant, minimum, maximum, average
    – Sensor head: Interchangeable, replaceable
    – Display status indicators: Battery, sensor, standby
    – Sensor calibration: Zero and gain calibration
    – Analog output: 0-5 V
    – Digital Interface: RS-232 to USB
    – Data logging: Up to 8,188 records (2706 incl. Temp/RH)
    – PC data logging (Windows 7, 8, XP): Software and data cable supplied. Link data to a specific location and monitor.
    – Clock function: Real time
    – Power supply: 12V DC (power adaptor/charger supplied 100-250 V AC)
    – Rechargeable battery: Lithium polymer 12 V DC 2700 mA/h
    – Enclosure material and rating: PC and ABS; IP20 and NEMA 1 equivalent
    – Size (with sensor head): (L x W x D) 195 x 122 x 54 (mm); 7 x 4 x 2 (in)
    – Environmental operating conditions: Temperature: -5 C to 45 C/Humidity: 0 to 95 % non-condensing
    – Temperature & Humidity sensor: Range – 40 C to 124 C (- 40 F to 255 F); Range 0 to 100 % RH
    Particulate Matter Sensor features and specifications:
    The IC-PM is Aeroqual’s portable portable particulate monitor for accurate and simultaneous measurement of PM10 and PM2.5 in ambient outdoor and indoor environments. Compatible with Aeroqual’s Series 200/300/500 air quality monitors, the portable particulate monitor will output particulate matter (PM) measurements for PM10 and PM2.5 in real-time.
    – Range: 0.000 to 1.000 mg /m3
    – Measurement Parameters: PM2.5 and PM10
    – Sensor Type: Laser particle counter
    – Minimum Detection Limit: 0.001 mg/m3
    – Accuracy of Factory Calibration: +/- (0.002 mg/m3 + 15 % of reading)
    – Resolution: 0.001 mg/3
    – Response Time: 5 Seconds
    – Temp: 0 to 40C
    – Relative Humidity: 0 to 90% non-condensating

     

    (0 reviews)
    Add to Quote
    Diagnostic Tools

    INSTRUMENT CHOICE Kestrel 5400 Heat Stress WBGT Meter (Safety Orange)

    IC-0854ORA

    IC-0854VORA (with Vane Mount)

     

    Please note: These units will come with a “Certificate of Conformance” from Kestrel, however, in general this does not constitute a formal calibration certificate.
    Features:

    – Flag warnings via loud buzzer & LED beacon!

    – Takes 1 AA battery (instead of 2 AAA)
    – Battery door is in the back, sealed away from the motherboard, should your battery leak as was common with all the 4000 series. All 5000 battery doors are the same and interchangeable.
    – Slightly larger and improved higher contrast / resolution screen for any lighting (even sunlight) and easy on your eyes.
    – Intuitive user-interface screen navigation
    – Multiple Languages (English, French, German, Spanish)
    – Scratch and breakage-resistant window
    – All meters include both options of Red (NV – Night Vision) & White backlights.
    – Slightly bigger, more robust, though not really noticeable difference.
    – Roughly 10,000 data points. 4000 series all had under 5000 data points.
    Measures:

    – Altitude

    – Barometric Pressure
    – Density Altitude
    – Dew Point Temperature
    – Globe Temperature
    – Heat Stress Index
    – Naturally Aspirated Wet Bulb Temperature
    – Relative Humidity
    – Station Pressure (Absolute Pressure)
    – Temperature
    – Thermal Work Limit (TWL)
    – Wet Bulb Temperature (Psychrometric)
    – Wet Bulb Globe Temperature (WBGT)
    – Wind Chill
    – Wind Speed
    Have you seen a cheaper Grey Import online? You need to read this before purchasing:
    Kestrel meters from the USA do NOT come with a C-Tick, which is required to be imported to AU.
    Warranty without a C-Tick will not be covered through the AU distributor/Reseller and will not be their responsibility. In order to receive a unit with the required C-Tick, you must purchase it from an authorized Australian retailer/distributor. You cannot purchase these meters in the USA or anywhere else. If a meter is shipped to you from the USA, you risk the meter being destroyed at customs.
    All Kestrel meters supplied by Instrument Choice come with a C-Tick and we offer the full 5 year warranty
    (0 reviews)
    Add to Quote This product has multiple variants. The options may be chosen on the product page