SP TOOLS CAN OBDII/EOBD/JOBD Scanner Code Reader
- Works with all 1996 and newer vehicles that are JOBD/OBDII/EOBD compliant
(Including the CAN, J1850 PWM, J1850 VPW, ISO9141 and KWP2000 protocols) - Compliant with OBDII 16 PIN Toyota, Honda, Daihatsu, Mitsubishi, Mazda, Nissan, Suzuki & Subaru
- Reads and clears generic and manufacturer specific diagnostic trouble codes (DTC’s) and turns off check engine light
- Wider vehicle coverage with CAN protocol support
- Supports multiple trouble code requests: Generic codes, pending codes and manufacturer specific codes
- Code definitions are displayed on unit screen
- Reviews the emission readiness status of OBDII Monitors
- Determines malfunction indicator lamp (MIL) status
- Retrieves VIN (Vehicle Identification No.) on 2002 and newer vehicles that supports Mode 9
- Reviews the live data on unit screen. • Review live data graph with four items in one screen
- Stand-alone unit with no need for an additional laptop or computer to operate
- Small in size and comfortably fits in the palm of your hand
- Unit updates via internet by USB cable
- Software CD with over 10,000 DTC definitions included
- No batteries needed as the unit is powered via OBD2 cable
- 2.8” TFT colour screen displays more information on screen
Related products
-
Diagnostic ToolsINSTRUMENT CHOICE WR-3 Plus Wireless Anemometer Kit
WR3PKit
The WR-3 Plus Wireless Anemometer is a reliable and stable solution for measuring wind speed in a variety of industries, including construction, marine, film production, scaffolding, and wind farms. With a range of up to 500m, this wireless anemometer offers real-time measurement of wind speed, temperature, and air pressure.One of the key features of the WR-3 Plus is its instant wind speed alarm. Users can set a wind speed warning limit based on local operation safety standards, and the device will trigger an audible and visual alarm if the limit is reached. This feature is especially important in the construction and crane industries, where windy conditions can pose a potential danger to workers and equipment. With the WR-3 Plus, multiple stakeholders can be notified on-site through the device’s unique wireless address and connection to several displays.– Ultra-long wireless transceiver range of up to 500m
– Audible and visual wind speed alarm– Data recording for up to 1 year– Measurements for wind speed, temperature, and air pressure– Sensor battery life of up to 3 years– Waterproof and impact resistant design with an IP67 rating– Fast and secure magnetic installation kitIn addition to its real-time measurement capabilities, the WR-3 Plus also offers data recording for up to 1 year. This is made possible by the device’s 64MB built-in memory and impressive battery life. The recorded data can be easily exported in Excel format for further analysis, making it a valuable tool for tracking and improving safety measures in various industries.The WR-3 Plus also boasts a user-friendly interface with a large, backlit LCD display. This display clearly indicates live weather data in various units of measurement, including live wind speed, average wind speed (with selectable averaging), maximum wind speed, ambient temperature, and atmospheric pressure. Users can also view hourly wind records and historical bar charts from the past 12 hours on different pages.– Large LCD backlit display with user-friendly interface
– Ability to view live wind speed in various units of measurement– Option to view average wind speed with selectable averaging– Ability to view maximum wind speed– Ability to view ambient temperature– Beaufort bar graph for visual representation of wind strength– Wind chill calculation for temperature and wind speed combination– Atmospheric pressure displayOther features of the WR-3 Plus include its fast and secure magnetic installation kit, IP67 waterproof and impact resistant design, and up to 3 years of sensor battery life. Overall, the WR-3 Plus is a reliable and essential tool for ensuring safety in windy conditions and a variety of industries.
Warranty: 2 Years (1 Year Manufacturer Warranty + Bonus 1 Year Instrument Choice Warranty)
Applications include:– Construction and cranes
– Marine, ports, and offshore operations– Film production and outdoor entertainment– Scaffolding and temporary structure use– Rigging and communications industry– Wind farms and turbines
SpecificationsWind Speed Sensor:– Unit: m/s, knots, MPH, km/hr
– Range: 0.3 to 50 m/s– Resolution: 0.1 m/s/0.1 knots/0.1 MPH/0.1 km/hr– Accuracy: 2% FS
Temperature Sensor:– Unit: C/F
– Range: -30C to 60C– Resolution: 0.1C/0.1F– Accuracy: 1C
Atmospheric Pressure Sensor:– Unit: hPa/mmHg/bar
– Range: 500 to 1100 hPa– Resolution: 1 hPa/0.1 mmHg/0.001 bar– Accuracy: 4 hPa
Wireless Sensor:– Frequency: 868MHz(default), 915MHz
– Distance: Max 500m* (depends on the applied environment)– Data rate: Every 2 seconds– Power supply: 1x 3.6V 18505 Lithium battery– Waterproof rating: IP67– Weight: 406g– Dimensions: 262.5 x 183.5 x32mm
Data Logger:– Receiver buzzer: > 80dB
– Built-in memory: 64MB– Output: .xlxs, .xls– Data logger” wind speed, temperature, atmospheric pressure– Logging interval: 2s, 5s, 10s, 1min, 5 mins, 10 mins, 60 mins– Power supply: 3x 1.5V AA battery, Micro USB port– Dimensions: 189.6 x 75.6 x 36.3mm– Weight: 205g(0 reviews) -
Diagnostic ToolsSP TOOLS Adjustable Advance Timing Light
- Quickly tune-up cars, trucks, marine and recreational vehicles
- Works on conventional, electronic and computer controlled ignition systems on both adjustable and nonadjustable timing systems
- Patented Skip circuitry – Tests up to 10,000RPM
- Dial type timing advance (0˚- 60˚ score)
- Heat resistant metal inductive pick-up
- One handed operation
- Detachable leads for easy replacement and use
- Protective hand guard for added safety
- Rotating barrel for better aim at timing mark
- Easy access slim-line barrel
- Optical correct lens
(0 reviews) -
Diagnostic ToolsINSTRUMENT CHOICE Waterproof Pocket Wind Meter (Anemometer)
Kestrel-1000
Please note: These units will come with a “Certificate of Conformance” from Kestrel, however, in general this does not constitute a formal calibration certificate.The Kestrel 1000 Pocket Wind Meter was the original meter of this type, and it is still going strong. Users will receive accurate current wind speed, average wind speed and maximum wind gust reports while on the go. The only thing that has changed about this reliable model over the years is the aesthetics of the unit.The Kestrel 1000 can easily be switched between mph, km/h, ft/min, m/s, knots and Beaufort measurements. The meter features a one inch impeller mounted on a sapphire jewel bearing to ensure that it starts running at the slightest hint of air.The unit comes with a protective case, a Kestrel Certificate of Conformity, a neck lanyard and a five year manufacturer’s warranty.6 Year Warranty (5 Year Manufacturer Warranty + Bonus 1 Year Instrument Choice Warranty)
What does the Kestrel-1000 Measure?– Current Wind Speed
– Average Wind Speed– Maximum Wind Gust
Features:– Aviation green electroluminescent back light
– Stores maximum and average recordings– Auto shut down after 45 minutes with no activity– One touch clear and reset– Assembled in the U.S.– Data Hold Function– Large LCD screen– Protective Cover– Waterproof and floats– Patented user-replaceable impeller– Neck lanyard
Specifications:– Wind Speed Range: 0.4 to 60.0 m/s, 59 to 11,948 ft/min, 1.0 to 218.0 km/h, 0.8 to 135.0 mph, 0.6 to 118.3 kt and 0 to 12 B
– Display updates every second– Accuracy Rating: Within three percent– Operational Temperature: -10C to 50 C
Power Requirements:– CR2032
Dimensions:– 122 mm x 42 mm x 18 mm(0 reviews) -
Diagnostic ToolsINSTRUMENT CHOICE Scarlet Heat Stress Detector
IC-TWL-1SPlease note; These units do not come with formal calibration certificates, if required please contact us to ensure the correct certificate can be provided.Features:– Dash board: Colorful LCD backlight tells you the risk level based on the TWL value. Work-rest schedule and fluid intake are integrated into the display. A countdown timer shows the time remaining before a recommended rest.
– Cup anemometer captures winds from any direction. You do not have to manually decide the wind direction before measuring the wind speed. Compared to the impeller, wind cup is not restricted to the direction of the wind. It considers all the horizontal components of winds that move the anemometer. A silicone pad covers the top of the bearing to prevent it from dust accumulation.– Data Logger : TWL-1S can record data with configurable sampling rate. PC side software helps download the data for further analysis using other analytical tools, and it also synchronizes the date and time of the device with PC.– Optimised Globe: TWL theory considers Mean Radiant Temperature (MRT), the most important parameter governing human energy balance. MRT can be derived from globe temperature (GT) measured by the black-bulb thermometer. The smaller the surface area of the black bulb, the greater the effect of the air temperature and air velocity is, thus causing inaccuracy of the calculation of MRT. Therefore, it needs a modifying formula to adjust it to the standard globe bulb with a diameter of 15 cm. The 7.5 cm globe bulb is the optimal size for a portable based on our research and experiments.– Sensor Protection : Delicate temperature and humidity sensor are well protected by a replaceable polypropylene (PP) filter in a solid shield, exempted the sensors from dust damage and external strike. A silicone pad protects the mechanism of anemometer from dust.Measurement specifications:– Air Temperature (Range): 0-60 C
– Air Temperature (Accuracy): 0.6 C– Globe Bulb Indoor (Range) 0-80 C– Globe Bulb Indoor (Accuracy): 1.0 C (15…40 C); 1.5 C (others)– Globe Bulb Outdoor (Range): 0-80 C– Globe Bulb Outdoor (Accuracy): 1.5 C (15…40 C); 2.0 C (others)– Relative Humidity (Range): 5-95 %rh– Relative Humidity (Accuracy): 3% (at 25 C; 10…90 %rh) 5% (others)– Wind Speed (Range): 0.5 – 10 m/s– Wind Speed (Accuracy): (2% of reading + 0.2) m/sMeter specifications:– Operating range electronics: -1060 C
– Accuracy at 23 5 C: 1.0 %rh / 0.2 K– Power supply / consumption: 4 AAA 3V battery, power supply 4 mA consumption without lighting– Probe protection: Polypropylene plastic cage– Calibration / adjustment: Scarlet calibration kit– Measurement interval: 2 seconds– Back-light: with Back-light– Alarm indicators: Yes– Battery indicator: Low Batt. Display– Software: Scarlet TWLIT– Risk level indicator: Yes. 3 color LCD backlight: red (risk), yellow (med), green (safe)– Data logger: Yes. Min data rate 10 min, 2,000 data.– Connection Interface: Mini USB (UART)– Enclosure material: ABS(0 reviews)
