View cart “CRC De-Squeak 300g” has been added to your cart.
SIKA Sika Boom® Cleaner
Cleaner for Sika Boom® application guns
Sika Boom® Cleaner is an active cleaner for cleaning Sika Boom® application guns and fresh Sika Boom® residue from surfaces.
Very good PU foam cleaner
Very good PU spray gun and equipment cleaner
Integral valve for precise application
Clean Sika® PU foam application equipment after use.
Removes fresh, uncured polyurethane foam residue from equipment and other surfaces, as well as cleaning and removing grease from contaminated substrates.
Pigmented, solvent-based primer for various substrates
Sika® Primer-206 G+P is a solvent-based black primer, which reacts with moisture and forms a thin layer. This layer acts as a link between substrates and adhesives.
Sika® Primer-206 G+P is specifically formulated for the treatment of bond faces prior to application of Sika’s 1-component Polyurethanes.
Enhanced adhesion on a wide variety of substrates
Easy to apply
Usage
Sika® Primer-206 G+P is used to improve adhesion on substrates such as float glass, ceramic-coated glass, pre-coatings, painted surfaces and some plastics and metals.
Seek manufacturer’s advice and perform tests on original substrates before using Sika® Primer-206 G+P on materials prone to stress cracking.
This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.
CRC TAC2 is a tough adhesive lubricant that bonds to chain/wear surfaces to keep them in peak operating condition by reducing friction and wear that lead to metal fatigue.
Recommended for all types of chain drives, open gears, car wash equipment, bottling plant, hoists, conveyors, fork lifts, tractors, farm equipment, cement trucks, wire ropes and marine applications.
Resists cold, hot and salt water wash off and high temperature sling off. Reduces wear and friction. Lubricates effectively chain drives, open gears, pulleys, wire ropes, conveyors. Penetrates vital chain pin and bushing areas and wire rope strands.
Most fuel injected vehicles are fitted with a mass air flow (MAF) sensor to measure air velocity which the computer uses to determine the proper air/fuel mixture. However, the MAF sensor gets dirty with debris, oil, grease and air filter fibres, causing inaccurate measurements of air flow which results in a ‘rich’ running engine, loss of power and excess emissions. CRC MAF Sensor Cleaner will safely clean and protect your mass air flow sensor, improving air/fuel ratio and increasing kilometres per litre. The use of aggressive products like brake and carburettor cleaners on MAF sensors can cause serious damage to sensitive parts.
Recommended as a safe and effective way to clean delicate MAF sensors in modern vehicles
Cleans & protects MAF Sensors – will not damage MAF sensors or housing (unlike other chemicals). Plastic safe & residue free – evaporates in seconds. Improves air/fuel ratio. Increases km/litre – improves fuel economy. Increases/restores horsepower