[email protected]
189 Gurrundah Rd, Goulburn NSW 2580
Call us:(02) 4823 5655

ITM Macc Semi-Synthetic Cutting Fluid 5L

Water mix cutting fluid designed for use with most coldsaws, bandsaws, & metal working machinery that use a recirculating coolant system with fluid storage tank.
Resistant to bacterial & fungal growth, extending fluid service life.
Provides an excellent surface finish & extends blade life
Contains corrosion inhibitors to protect machine parts and workpiece
Mix 1 part fluid to 8 parts water

In Stock
SKU: MF-5LITRE Categories: ,

Related products

  • Chemicals, Lubricants & Adhesives

    SIKA Sikaflex®-291
    Multifunctional adhesive sealant for marine applications

    Sikaflex®-291 is a non-sag, 1-component polyurethane sealant specifically developed for the marine market, which cures on exposure to atmospheric moisture.
    Sikaflex®-291 meets the requirements set out by the International Maritime Organisation (IMO).

    • Bonds well to a wide variety of substrates
    • Good ageing and weathering resistance
    • Elastic
    • Bonds well to a wide variety of substrates
    • Good ageing and weathering resistance
    • Elastic
    • Low odour
    • Non-corrosive
    • Can be over painted
    • Can be sanded

    Usage

    Sikaflex®-291 is a multipurpose product for use in marine constructions. It is suitable for making elastic, vibration-resistant joint seals, and can also be used for a variety of interior sealing applications. Sikaflex®-291 bonds well to the materials commonly used in marine construction like wood, metals, metal primers and paint coatings (2-C systems), ceramic materials and plastics (GRP, etc.). Sikaflex®-291 must not be used to seal plastics that are prone to stress cracking (e.g. Plexiglas, Polycarbonate, etc.). Once cured, Sikaflex®-291 can easily be sanded as required. This product is suitable for experienced professional users only. Test with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.

    (0 reviews)
    Add to Quote
  • CRC

    CRC Mass Air Flow Sensor Cleaner 300g

    Most fuel injected vehicles are fitted with a mass air flow (MAF) sensor to measure air velocity which the computer uses to determine the proper air/fuel mixture. However, the MAF sensor gets dirty with debris, oil, grease and air filter fibres, causing inaccurate measurements of air flow which results in a ‘rich’ running engine, loss of power and excess emissions. CRC MAF Sensor Cleaner will safely clean and protect your mass air flow sensor, improving air/fuel ratio and increasing kilometres per litre. The use of aggressive products like brake and carburettor cleaners on MAF sensors can cause serious damage to sensitive parts.

    Recommended as a safe and effective way to clean delicate MAF sensors in modern vehicles

    Cleans & protects MAF Sensors – will not damage MAF sensors or housing (unlike other chemicals). Plastic safe & residue free – evaporates in seconds. Improves air/fuel ratio. Increases km/litre – improves fuel economy. Increases/restores horsepower

     

    (0 reviews)
    Add to Quote
  • Chemicals, Lubricants & Adhesives

    SIKA Sika® Primer-3 N
    Sika® Primer-3 N is a one component, transparent primer for porous surfaces and metal

    Sika® Primer-3 N is a solvent-based, 1-component primer.

    • Easy to apply
    • Water repellent
    • Short flash-off time

     

    Sika® Primer-3 N is designed for Sikaflex®, SikaHyflex®, SikaBond® and Sikasil® products used on porous substrates (e.g. concrete) and metals.

    Advantages

    • Easy to apply
    • Water repellent
    • Short flash-off time
    (0 reviews)
    Add to Quote
  • Chemicals, Lubricants & Adhesives

    SIKA Sika® Filler-107
    Ready to use water based general purpose surface filler for use in wet areas

    Sika® Filler-107 is a water based, ready to use general purpose surface and joint filler intended for use in wet areas

    • Ready to use, no mixing required
    • Easy application
    • High initial tack or grab on plaster and concrete
    • Sika® Filler-107 is suitable for interior surface filling work on plaster, woven fabrics, old wallpapers in wet environments such as kitchens and bathrooms.
    • Sika® Filler-107 complies with EN 15824 “Specifications for external and internal plasters based on organic binders” and EN 13963 “Jointing materials for gypsum plasterboards” – Type 3A (ready-mix, dual-purpose compound)

    Advantages

    • Ready to use, no mixing required
    • Easy application
    • High initial tack or grab on plaster and concrete
    • Quick drying
    • Not sensitive to moisture
    (0 reviews)
    Add to Quote