CRC Hot Shot Degreaser 500g
CRC Hot Shot Degreaser is a highly concentrated, self-emulsifying solvent degreaser specially formulated to quickly cut and remove grease, oil and dirt on all types of equipment.
Recommended for cleaning and degreasing automobile engines, industrial equipment, farm equipment, lawn mowers, garage floors and tools
Quickly dissolves grease, oil and dirt. Cleans iron, steel, aluminium, magnesium and copper. Not harmful to metal, rubber, plastic or concrete. Rinses off easily with water. 360° Aerosol valve for ease of application.
Related products
-
Industrial Chemicals & Adhesives
SIKA Sika Boom® Cleaner
Cleaner for Sika Boom® application gunsSika Boom® Cleaner is an active cleaner for cleaning Sika Boom® application guns and fresh Sika Boom® residue from surfaces.
- Very good PU foam cleaner
- Very good PU spray gun and equipment cleaner
- Integral valve for precise application
- Clean Sika® PU foam application equipment after use.
- Removes fresh, uncured polyurethane foam residue from equipment and other surfaces, as well as cleaning and removing grease from contaminated substrates.
Advantages
- Very good PU foam cleaner
- Very good PU spray gun and equipment cleaner
- Integral valve for precise application
(0 reviews) -
Industrial Chemicals & Adhesives
SIKA Sikaflex®-291
Multifunctional adhesive sealant for marine applicationsSikaflex®-291 is a non-sag, 1-component polyurethane sealant specifically developed for the marine market, which cures on exposure to atmospheric moisture.
Sikaflex®-291 meets the requirements set out by the International Maritime Organisation (IMO).- Bonds well to a wide variety of substrates
- Good ageing and weathering resistance
- Elastic
- Bonds well to a wide variety of substrates
- Good ageing and weathering resistance
- Elastic
- Low odour
- Non-corrosive
- Can be over painted
- Can be sanded
Usage
Sikaflex®-291 is a multipurpose product for use in marine constructions. It is suitable for making elastic, vibration-resistant joint seals, and can also be used for a variety of interior sealing applications. Sikaflex®-291 bonds well to the materials commonly used in marine construction like wood, metals, metal primers and paint coatings (2-C systems), ceramic materials and plastics (GRP, etc.). Sikaflex®-291 must not be used to seal plastics that are prone to stress cracking (e.g. Plexiglas, Polycarbonate, etc.). Once cured, Sikaflex®-291 can easily be sanded as required. This product is suitable for experienced professional users only. Test with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.
(0 reviews) -
Industrial Chemicals & Adhesives
SIKA Sikaflex®-221
Multi-purpose adhesive sealant with a wide adhesion rangeSikaflex®-221 is a multi-purpose 1-component polyurethane adhesive / sealant that bonds well to a wide variety of substrates like metals, metal primers and paint coatings (2-component systems), ceramic materials and plastics. It is suitable for making permanent elastic seals.
- Bonds well to a wide variety of substrates
- Resistant to ageing
- Can be sanded and painted
- Bonds well to a wide variety of substrates
- Resistant to ageing
- Can be sanded and painted
- Passes EN45545-2 R1/R7 HL3
- Non-corrosive
- Low odour
- NSF-approved for incidental food contact
- Potable water approved (meets AS4020 requirements)
Usage
Sikaflex®-221 bonds well to a wide variety of substrates and is suitable for making permanent elastic seals . Suitable substrate materials are metals, metal primers and paint coatings (2-component systems), ceramic materials and plastics. It is ideally used for internal sealing and simple bonding applications. Seek manufacturer’s advice and perform tests on original substrates before using Sikaflex®-221 on materials prone to stress cracking. This product is suitable for experienced professional users only. Test with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.
(0 reviews) -
Industrial Chemicals & Adhesives
SIKA Sika® Filler-105
Ready to use water based thick layer surface fillerSika® Filler-105 is a water based, ready to use thick layer surface filler for internal surfaces.
- Ready to use, no mixing required
- Easy application
- Thick layer filling and levelling ability
- Sika® Filler-105 is suitable for indoor filling and repair where thicker filling capability are needed
- A finer grade filler such as Sika® Filler-101 should be used for finishing surfaces before painting
- Sika® Filler-105 complies with EN 15824 “Specifications for external and internal plasters based on organic binders”
Advantages
- Ready to use, no mixing required
- Easy application
- Thick layer filling and levelling ability
- High initial tack or grab on plaster and concrete
- Quick drying
(0 reviews)