[email protected]
189 Gurrundah Rd, Goulburn NSW 2580
Call us:(02) 4823 5655

KLEIN TOOLS Test Kit with Multimeter, Non-Contact Volt Tester, Receptacle Tester

  • Multimeter measures up to 600V AC/DC voltage, 10A DC current and 2MΩ resistance
  • Non-Contact Voltage Tester Cat. No. NCVT1P has a bright green LED to indicate the tester is working; it changes to red and audible tones sound when a voltage is detected
  • NCVT1P has a high-intensity, bright red LED that illuminates and an audible tone when a voltage is detected from the 50 to 1000V AC power operating range
  • Receptacle tester detects wiring configurations and indicates correct wiring, as well as identifying common wiring faults
  • Identifies open ground, open hot, open neutral, hot/ground reversed; it does not indicate quality of the ground, multiple hot wires, or a combination of defects
  • MM300 multimeter tests continuity with visual and audible continuity indicators
  • Test leads included for Cat. No. MM300; batteries included for Cat. Nos. NCVT1P and MM300

In Stock
SKU: 69149P Categories: , , , ,

Related products

  • Diagnostic Tools

    SP TOOLS Multimeter Dual Test Lead Set – Alligator & Standard Probe

    SET INCLUDES:

    • Alligator Clip Test Lead Set
    • Standard Probe Test Lead Set
    • Suits all SP Multimeters

    ALLIGATOR CLIP TEST LEAD SET TO BANANA PLUG

    • Insulated finger guarded alligator clips for easy application
    • Silicon rubber insulated cable – 1m
    • CAT III 1000V, 10A

    STANDARD PROBE TEST LEAD SET TO BANANA PLUG

    • Multi-rated probe tips with removable cap (CAT IV 600A) are insulated leaving only 2mm of exposed metal to prevent inadvertent bridging of live conductors and accidental short circuits
    • Silicon rubber insulated cable – 1m
    • CAT III 1000V, 10A
    (0 reviews)
    Add to Quote
    Diagnostic Tools

    INSTRUMENT CHOICE WBGT Meter with Color-Coded LCD
    IC-801038
    This unique heat stress meter features bright multi-color LCD backlights corresponding to OSHA’s heat stress alert levels. This visual alert system can be seen at a distance allowing management and workers to be instantly aware when the heat index enters potentially dangerous zones.
    The 801038 also calculates heat stress values for direct sunlight and shade and displays humidity, maximum and minimum ambient (TA) and black globe (TG) temperatures. Also indicates low battery and a hold function. Comes complete with clear instructions, integrated tripod screw and 4 AAA batteries.
    Specifications
    Ambient Air temperature:

    – Range: 0 to 50 C (32 to 122 F)

    – Resolution: 0.1
    – Accuracy: +/- 0.6 C (1.5 F)
    Globe Temperature:

    – Range: 0 to 80 C (32 to 176 F)

    – Resolution: 0.1
    – Accuracy: +/- 1 C at 15 to 40 C; +/- 2 C outside this range
    Relative Humidity:

    – Range: 5 to 90%

    – Resolution: 0.1
    – Accuracy: +/- 4%
    WBGT:

    – Range: 0 to 50 C (32 to 122 F)

    – Resolution: 0.1
    – Accuracy: +/- 1 C at 15 to 40 C; +/- 2 C outside this range
    (0 reviews)
    Add to Quote
    Diagnostic Tools

    INSTRUMENT CHOICE Scarlet Heat Stress Detector
    IC-TWL-1S
    Please note; These units do not come with formal calibration certificates, if required please contact us to ensure the correct certificate can be provided.
    Features:

    – Dash board: Colorful LCD backlight tells you the risk level based on the TWL value. Work-rest schedule and fluid intake are integrated into the display. A countdown timer shows the time remaining before a recommended rest.

    – Cup anemometer captures winds from any direction. You do not have to manually decide the wind direction before measuring the wind speed. Compared to the impeller, wind cup is not restricted to the direction of the wind. It considers all the horizontal components of winds that move the anemometer. A silicone pad covers the top of the bearing to prevent it from dust accumulation.
    – Data Logger : TWL-1S can record data with configurable sampling rate. PC side software helps download the data for further analysis using other analytical tools, and it also synchronizes the date and time of the device with PC.
    – Optimised Globe: TWL theory considers Mean Radiant Temperature (MRT), the most important parameter governing human energy balance. MRT can be derived from globe temperature (GT) measured by the black-bulb thermometer. The smaller the surface area of the black bulb, the greater the effect of the air temperature and air velocity is, thus causing inaccuracy of the calculation of MRT. Therefore, it needs a modifying formula to adjust it to the standard globe bulb with a diameter of 15 cm. The 7.5 cm globe bulb is the optimal size for a portable based on our research and experiments.
    – Sensor Protection : Delicate temperature and humidity sensor are well protected by a replaceable polypropylene (PP) filter in a solid shield, exempted the sensors from dust damage and external strike. A silicone pad protects the mechanism of anemometer from dust.
    Measurement specifications:

    – Air Temperature (Range): 0-60 C

    – Air Temperature (Accuracy): 0.6 C
    – Globe Bulb Indoor (Range) 0-80 C
    – Globe Bulb Indoor (Accuracy): 1.0 C (15…40 C); 1.5 C (others)
    – Globe Bulb Outdoor (Range): 0-80 C
    – Globe Bulb Outdoor (Accuracy): 1.5 C (15…40 C); 2.0 C (others)
    – Relative Humidity (Range): 5-95 %rh
    – Relative Humidity (Accuracy): 3% (at 25 C; 10…90 %rh) 5% (others)
    – Wind Speed (Range): 0.5 – 10 m/s
    – Wind Speed (Accuracy): (2% of reading + 0.2) m/s
    Meter specifications:

    – Operating range electronics: -1060 C

    – Accuracy at 23 5 C: 1.0 %rh / 0.2 K
    – Power supply / consumption: 4 AAA 3V battery, power supply 4 mA consumption without lighting
    – Probe protection: Polypropylene plastic cage
    – Calibration / adjustment: Scarlet calibration kit
    – Measurement interval: 2 seconds
    – Back-light: with Back-light
    – Alarm indicators: Yes
    – Battery indicator: Low Batt. Display
    – Software: Scarlet TWLIT
    – Risk level indicator: Yes. 3 color LCD backlight: red (risk), yellow (med), green (safe)
    – Data logger: Yes. Min data rate 10 min, 2,000 data.
    – Connection Interface: Mini USB (UART)
    – Enclosure material: ABS
    (0 reviews)
    Add to Quote
  • Diagnostic Tools

    SP TOOLS CAN OBDII/EOBD Scanner Code Reader
    • Designed to work with OBDII compliant vehicles including next generation protocol, Control Area Network (CAN). Operation relies on access being provided by the vehicle manufacturer, for which legislation was introduced in Australia & NZ 2006, USA – 1996, Europe (petrol) 2001, Europe (diesel) 2004.
      Note: This model is not compatible with Japanese manufactured vehicles using JOBD protocol.
    • Reads and clears generic and manufacturer specific diagnostic trouble codes (DTC’s) and turns off check engine light
    • Supports multiple trouble code requests: Generic codes, pending codes and manufacturer specific codes
    • Code definitions are displayed on unit screen
    • Reviews the emission readiness status of OBDII Monitors
    • Determines malfunction indicator lamp (MIL) status
    • Retrieves VIN (Vehicle Identification No.) on 2002 and newer vehicles that supports Mode 9
    • Reviews the live data on unit screen
    • Easy to use with one plug in, highly reliable and accurate
    • Stand-alone unit with no need for an additional laptop/computer to operate
    • Small in size and comfortably fits in the palm of your hand
    • Unit updates via internet by USB cable
    • Software CD with over 10,000 DTC definitions included
    • No batteries needed as the unit is powered via OBD2 cable
    (0 reviews)
    Add to Quote