KINCROME TorqueMaster® VDE Screwdriver Set – 9 Piece
Specifications
Brand | KINCROME |
Drive Type | Phillips, Blade |
Magnetic Tip | Yes |
Pieces | 9 |
Range | TorqueMaster |
Shank | Insulated (Slim) |
Standard | DIN, VDE |
Voltage Rating | 1,000V AC, 1,500V DC |
Warranty | Lifetime Guarantee |
Colour | Red |
Material | SVCM (S3) Silicone Steel |
Length (mm) | 285 |
Width (mm) | 60 |
Height (mm) | 45 |
Weight (kg) | 0.685 |
Features
VDE certified up to 1,000v AC or 1,500v DC
S3 SVCM Alloy Steel, hardened, tempered and insulated
Drive indicators for easy identification
Slim insulated shafts
Tri-Lobe design that dovetails with the hand
Up to 50% more turning power than conventional screwdrivers
Magnetic tips for greater fastener control
Contents
3 VDE Screwdriver – Phillips:
No.0 x 60mm
No.1 x 80mm
No.2 x 100mm
5 VDE Screwdriver – Blade:
Blade 3 x 100mm
Blade 3.5 x 100mm
Blade 4 x 100mm
Blade 5.5 x 125mm
Blade 6.5 x 150mm
A/C Tester 100-250V
ntrol
Out of stock
SKU: K5619
Categories: Hand Tools, Screwdriver Sets, Screwdriver Sets, VDE Hand Tools, VDE Hand Tools, VDE Screwdrivers
Related products
-
Hand Tools
KNIPEX Long Nose Cutting Plier
- Elastic tips: dimensionally stable even when twisted
- Distortion-tolerant, elastic precision tips
- Half-round, long, pointed jaws
- With cutting edges (hardness approx.61 HRC) for soft, medium-hard and hard wire
- Vanadium electric steel- forged, oil-hardened
- 200mm
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand Tools
RENNSTEIG Electricians Octagonal Chisel
- Tapers to a very sharp edge for cutting recesses out of architraves, skirting etc. or for sockets and dimmer switches
- Makes a small groove with a neat edge
- Rennsteig Chisels are made of hardened chrome vanadium steel
- Forged, quenched and tempered as a whole to guarantee a good resiliency and long service life Work worn cutting edges are regrindable in short intervals, Ensure water cooling during regrinding process
- Chisel blades are lacquered to protect against corrosion
- Shanks dip coated in gold lacquer
- Made in Germany
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand Tools
GRIPPS Electrical Trade Kit
An end-to-end solution covering the entire suite of hand and power tools used by Electricians.
Tethers up to 31 tools.
Kit Contents
- 1 x H02056 Tape Measure Catch
- 1 x H10100 Bungee Tether Dual-Action 5.0kg
- 1 x H01068 Coil tether Single-Action
- 1 x H01021 Swivel Catch
- 10 x H01007 Tool Catch (Non-Conductive)
- 1 x H01010 V-Gripp Tape
- 1 x H01067 Webbing Wrist Tether Single-Action
- 1 x H01062 Coil Single-Action Wrist Tether (Non-Conductive)
- 1 x H01142 Belt-Loop Anchor
- 1 x H01085-M Slip-On Wrist Anchor (Medium)
- 10 x H01030 Screwlock Cable – 3.0mm x 12cm / 0.1″ x 4.75″
- 1 x H03048 Little Gripper Kit
(0 reviews) -
Cable & Wire Rope Shears
KNIPEX Cable Cutter – Ratchet Action
- For cutting copper and aluminium single conductors as well as multiple stranded cables
- Not suitable for steel wire and wire ropes
- Precision ground, hardened blades
- Clean and smooth cut without crushing and deformation
- One-hand operation using ratchet principle
- Little handforce required due to very high transmission ratio
- Two-stage ratchet drive for easy cutting
- Simple handling as a result of low weight and compact design – can be used even in confined areas
- Guard prevents operators’ fingers being pinched
- High-grade special tool steel, forged, oil-hardened
- Fixed handle with support area for putting down the pliers when cutting
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page