KINCROME OBD2 Scan Tool Semi Pro
Related products
-
Diagnostic ToolsINSTRUMENT CHOICE Waterproof Pocket Wind Meter (Anemometer)
Kestrel-1000
Please note: These units will come with a “Certificate of Conformance” from Kestrel, however, in general this does not constitute a formal calibration certificate.The Kestrel 1000 Pocket Wind Meter was the original meter of this type, and it is still going strong. Users will receive accurate current wind speed, average wind speed and maximum wind gust reports while on the go. The only thing that has changed about this reliable model over the years is the aesthetics of the unit.The Kestrel 1000 can easily be switched between mph, km/h, ft/min, m/s, knots and Beaufort measurements. The meter features a one inch impeller mounted on a sapphire jewel bearing to ensure that it starts running at the slightest hint of air.The unit comes with a protective case, a Kestrel Certificate of Conformity, a neck lanyard and a five year manufacturer’s warranty.6 Year Warranty (5 Year Manufacturer Warranty + Bonus 1 Year Instrument Choice Warranty)
What does the Kestrel-1000 Measure?– Current Wind Speed
– Average Wind Speed– Maximum Wind Gust
Features:– Aviation green electroluminescent back light
– Stores maximum and average recordings– Auto shut down after 45 minutes with no activity– One touch clear and reset– Assembled in the U.S.– Data Hold Function– Large LCD screen– Protective Cover– Waterproof and floats– Patented user-replaceable impeller– Neck lanyard
Specifications:– Wind Speed Range: 0.4 to 60.0 m/s, 59 to 11,948 ft/min, 1.0 to 218.0 km/h, 0.8 to 135.0 mph, 0.6 to 118.3 kt and 0 to 12 B
– Display updates every second– Accuracy Rating: Within three percent– Operational Temperature: -10C to 50 C
Power Requirements:– CR2032
Dimensions:– 122 mm x 42 mm x 18 mm(0 reviews) -
Diagnostic ToolsINSTRUMENT CHOICE Moisture Meter For Wood & Building Materials With Thermometer
0560-6062
In addition to material moisture, testo 606-2 also measures air moisture and temperature. In this way, drying conditions can be reliably assessed directly on-site
- Precise measurement of wood moisture with stored characteristics curves for beech, spruce, larch, oak, pine, maple
- Additional characterisitic curves for cement screed, concrete, plaster, anhydrite screed, cement mortar, lime mortar, brick
- Hold function for easy readout of readings
- Display illumination
- Self-test function
- Protective cap for safe storage
- Including wrist strap and belt holder
- Measurement of temperature and humidity in ambient air
- Air humidity measurement with the long-term stable Testo humidity sensor
- Incl. dewpoint calculation and wet bulb
Storage temperature: -40 to +70 C
Operating temperature: -10 to +50 C
Battery type: 2 batteries Type AAA
Battery life: 130 h
Weight: 90 g
Dimensions: 119 x 46 x 25 mmProbe type NTC
Meas. range: -10 to +50 C
Accuracy: 0.5 C
Resolution: 0.1 CProbe type Conductive measurement cell
Meas. Range: 0 to 50%
Accuracy: 1%
Resolution: 0.1
Probe type: humid. sensor, cap.
Meas. Range: 0 to 100 %RH
Accuracy: 2.5 %RH (5 to 95 %RH)
Resolution: 0.1 %RH(0 reviews) -
Diagnostic ToolsINSTRUMENT CHOICE Scarlet Heat Stress Detector
IC-TWL-1SPlease note; These units do not come with formal calibration certificates, if required please contact us to ensure the correct certificate can be provided.Features:– Dash board: Colorful LCD backlight tells you the risk level based on the TWL value. Work-rest schedule and fluid intake are integrated into the display. A countdown timer shows the time remaining before a recommended rest.
– Cup anemometer captures winds from any direction. You do not have to manually decide the wind direction before measuring the wind speed. Compared to the impeller, wind cup is not restricted to the direction of the wind. It considers all the horizontal components of winds that move the anemometer. A silicone pad covers the top of the bearing to prevent it from dust accumulation.– Data Logger : TWL-1S can record data with configurable sampling rate. PC side software helps download the data for further analysis using other analytical tools, and it also synchronizes the date and time of the device with PC.– Optimised Globe: TWL theory considers Mean Radiant Temperature (MRT), the most important parameter governing human energy balance. MRT can be derived from globe temperature (GT) measured by the black-bulb thermometer. The smaller the surface area of the black bulb, the greater the effect of the air temperature and air velocity is, thus causing inaccuracy of the calculation of MRT. Therefore, it needs a modifying formula to adjust it to the standard globe bulb with a diameter of 15 cm. The 7.5 cm globe bulb is the optimal size for a portable based on our research and experiments.– Sensor Protection : Delicate temperature and humidity sensor are well protected by a replaceable polypropylene (PP) filter in a solid shield, exempted the sensors from dust damage and external strike. A silicone pad protects the mechanism of anemometer from dust.Measurement specifications:– Air Temperature (Range): 0-60 C
– Air Temperature (Accuracy): 0.6 C– Globe Bulb Indoor (Range) 0-80 C– Globe Bulb Indoor (Accuracy): 1.0 C (15…40 C); 1.5 C (others)– Globe Bulb Outdoor (Range): 0-80 C– Globe Bulb Outdoor (Accuracy): 1.5 C (15…40 C); 2.0 C (others)– Relative Humidity (Range): 5-95 %rh– Relative Humidity (Accuracy): 3% (at 25 C; 10…90 %rh) 5% (others)– Wind Speed (Range): 0.5 – 10 m/s– Wind Speed (Accuracy): (2% of reading + 0.2) m/sMeter specifications:– Operating range electronics: -1060 C
– Accuracy at 23 5 C: 1.0 %rh / 0.2 K– Power supply / consumption: 4 AAA 3V battery, power supply 4 mA consumption without lighting– Probe protection: Polypropylene plastic cage– Calibration / adjustment: Scarlet calibration kit– Measurement interval: 2 seconds– Back-light: with Back-light– Alarm indicators: Yes– Battery indicator: Low Batt. Display– Software: Scarlet TWLIT– Risk level indicator: Yes. 3 color LCD backlight: red (risk), yellow (med), green (safe)– Data logger: Yes. Min data rate 10 min, 2,000 data.– Connection Interface: Mini USB (UART)– Enclosure material: ABS(0 reviews) -
Diagnostic ToolsINSTRUMENT CHOICE Multi-Function 4 in 1 Thermometer
The LM-8000A is a four-in-one anemometer, humidity reader, light meter and thermometer. Its rugged and lightweight design was created to make it easy to use in the field. Each of the measurements is highly accurate, and the unit stores maximum and minimum data for each of its functions. The LM-8000As data hold feature makes it easy to use even. The unit has a built-in microprocessor circuit to ensure excellent accuracy and performance.
Each of the units four functions is performed via the usage of the latest high-tech equipment.
What does the LM-8000A measure?
Temperature
Humidity
Wind Speed/Air Velocity
Light
Features
Four-in-one Anemometer, Hygrometer, Thermometer and Light Meter.
Suitable for one-handed operation
Hold button freezes the current reading
Internal temperature and humidity sensor
Stores the minimum and maximum readings for all four settings
Highly accurate low-friction ball vane wheels design
Utilises a standard type K thermocouple outlet
Performance and accuracy are supplied by the built-in microprocessor circuitSpecifications
Measures temperatures from 0 to 50C (Internal Thermistor)
Measures temperatures from -100 to 1300C (Thermocouple input)
Measures light from 0 to 20,000 Lux
Measures relative humidity from 10 to 95 percent
Measures air velocity from 80 to 5910 ft/min, 0.4 to 30.0 m/s, 1.4 to 108.0 km/h, 0.9 to 67.0 mile/h and 0.8 to 58.3 knotsPower Requirements
006P DC 9V batteryMeasurements
156 mm x 60 mm x 33 mmWarranty
24 Months
(0 reviews)
