FLUKE 718 Pressure Calibrator
- Pressure Source and mA Measurement to calibrate pressure devices
- Built-in pump for sourcing pressure to 300 PSI
- Easy-to-clean, field-serviceable, integrated pressure pump
- Built-in switch test for calibrating pressure switches
- Extend pressure capabilities by using Fluke 750P pressure modules
Related products
-
Pressure CalibratorsFLUKE Calibration E-DWT Electronic Deadweight Tester
A modern alternative to the traditional deadweight tester
E-DWT-H breaks new ground, improving the hydraulic pressure calibration process. E-DWT-H is an electronic calibrator designed to replace mechanical, piston-cylinder and weight based deadweight testers. It’s a lighter, easier-to-use deadweight tester alternative that is at home in the lab or instrument shop, as well as in the field performing in-situ calibrations and tests. This complete hydraulic pressure calibration system combines the convenience and precision of continuous, realtime electronic pressure measurement with the simple and direct operation of high quality operator controlled pressure generation hardware. E-DWT-H one year measurement uncertainty is ±0.02% of reading with ranges up to 30,000 psi. It can be configured to provide this uncertainty from its full scale down to 1% of its range. Built-in pressure generation and control hardware allow the operator to fill and prime the system under test and generate and precisely adjust pressure throughout the range with ease.
Broad workload coverage
The E-DWT-H has the operational versatility to calibrate and test a broad range of pressure measuring instruments including:
- Analog gauges
- Transducers
- Calibrators
- Sensors
- Transmitters
AutoTest™ lets E-DWT operators quickly define test points and adjust all of the range-dependent settings with a single function.
The resolution and stability test used by the RPM4-E-DWT are set according to the range of the device under test. The upper limit setting is also set and provides range-based warnings and overpressure protection. While running AutoTests, the operator is prompted to set each sequential test point and test data is stored in the RPM4-E-DWT for recall or download. Typical test setup is quick and easy, but more complex tests can also be stored and reused.
Deadweight tester performance with digital measurement convenience
E-DWT-H offers precision, low measurement uncertainty and the stability over time of a conventional deadweight tester without the inconveniences associated with the piston-cylinders, weights, hand pumps, and interconnecting plumbing.
- No weights to load and unload or regularly send out for calibration
- No need to know and correct for local gravity or ambient temperature
- No piston-cylinder changes; switch Q-RPT ranges in seconds
- Not sensitive to level or vibration
- Able to set and read any pressure value exactly, no minimum increment limited by smallest available masses
- Operates in any unit of measure while deadweight tester is typically limited to the pressure unit stamped on the mass
- Perfect for applications that require setting a nominal pressure precisely on the device under test and measuring it, such as analog gauge calibration
- On-board, AutoTest calibration routines and data acquisition
- Interfaceable with a PC or laptop to allow for automated data acquisition
- Two year calibration interval supported at measurement uncertainty of ±0.025% of reading.
- Easily recalibrated without crossfloating. Automated calibration of E-DWT-H is possible using COMPASS® for Pressure software.
Versatility to cover a broad workload in a variety of environments
The E-DWT-H is at home in metrology and calibration labs, on the production floor or in the field. It operates with Sebacate calibration fluid, mineral oil, Skydrol® and other liquids. An optional battery/charger pack supports up to eight hours of operation away from line power.
(0 reviews) -
Multifunction CalibratorsFLUKE 726 Precision Multifunction Calibrators
- Precision multifunction, temp, frequency, voltage, and mA calibrator
- Calibrates thermocouples and RTD temperature instruments
- Stores up to eight calibration results in memory for analysis
- Built-in 24 V Loop Power Supply
(0 reviews) -
Multifunction CalibratorsFLUKE 753 Documenting Process Calibrator
Fluke 753 Documenting Process Calibrator helps you work smarter and faster
The Fluke 753 is a powerful multifunction documenting calibrator that lets you download procedures, lists, and instructions created with software, and upload data for printing, archiving, and analysis. You’ll find it does the work of several tools, with simultaneous source and measurement capabilities for all common process parameters. It sources, simulates, and measures pressure, temperature, and electrical signals in one rugged, hand-held calibration tool. It also automates calibration procedures, captures data for documentation, and helps you meet rigorous standards like ISO 9000, FDA, EPA, and OSHA regulations.
The 753 includes a USB interface and a USB communication cable to enable two-way communication with DPCTrack 2 and other instrumentation management applications. To create a seamless/paperless calibration management system consider adding Fluke DPCTrack2 Calibration Management software for use with your Fluke 753 and 754 or even legacy Fluke 743 and 744 calibrators.
Other useful features:
- Measures and sources pressure using any of 50 Fluke 700Pxx Pressure Modules
- Allows you to creates and run automated as-found/as-left procedures to satisfy quality programs or regulations, and record and document results
- Holds up to a full week of downloaded procedures and calibration results
- Offers many flexible features like autostep, custom units, user-entered values during test, one-point and two-point switch testing, square root DP flow testing, programmable measurement delay and more.
- Offers compatibility with DPCTrack2 and many other asset management software packages
- Bright white dual display for reading both sourced and measured parameters simultaneously
- Easy-to-use multi-lingual interface
- Gas gauge and rechargeable Li-Ion battery for 10 hour uninterrupted use
- Comes with three-year warranty and DPC/Track trial software
(0 reviews) -
Pressure CalibratorsFLUKE 700G Pressure Gauge Calibrator
Portable, Precise, and Built for Field Calibration
Your Go-To Solution for Field Pressure Calibration
The Fluke 700G Series Pressure Gauge Calibrators are engineered specifically for field professionals who need rugged, accurate, and easy-to-use pressure measurement on the job. With a reputation for reliability and performance, the Fluke 700G is the ideal Fluke pressure gauge for demanding calibration and test applications.
Key Features of the Fluke 700G
- Extensive Pressure Range – Choose from 23 different models, covering ±10 inH2O/20 mbar up to 10,000 psi/690 bar. Whatever your field calibration needs, there’s a Fluke 700G pressure gauge that fits.
- High Accuracy – Standard accuracy is 0.05% of full scale. Reference class models deliver an impressive 0.04% of reading measurement accuracy, ensuring you always meet the most stringent requirements.
- Pressure Data Logging – Store up to 8,493 pressure measurements for later review. Use the 700G/TRACK software to upload, analyze, and report results right from your PC.
- Rugged Field Design – Fluke 700G pressure gauges are housed in a sealed IP67 enclosure and come with a protective holster. They are certified as intrinsically safe (CSA: Class 1, Div2, Groups A-D and ATEX: II 3 G Ex ic IIB T6 Gc), so you can work safely in hazardous or explosive environments.
- Long-Term Reliability – Every Fluke 700G pressure gauge is backed by a standard 3-year warranty for your peace of mind.
Simple, Complete Pressure Calibration—No Compromises
- Effortless Operation – Power on, connect to your pressure device, and read measurements instantly. No complex menus or setup—just fast, accurate pressure calibration in the field.
- Complete Solution with Pump Kits – Pair your Fluke 700G pressure gauge with the Fluke 700PTPK pneumatic or 700HTPK hydraulic pump kits for a complete sourcing and measurement solution. Premium pump kits (700PTPK2 and 700HTPK2) feature easy, no-tools-required connections for both the gauge and device under test.
- Versatile Calibration – Calibrate to 600 psi (20 bar) with the 700PTPK or 700PTPK2 pneumatic pump kit. Handle higher pressures using compatible hydraulic pump solutions.
Built for Field Professionals
- Portable and Lightweight – Take your Fluke pressure gauge anywhere. Designed for durability and ease of use in the harshest environments.
- Safe and Certified – Intrinsically safe certifications let you work confidently in classified areas where explosive gases may be present.
- Easy Connectivity – Premium kits provide “no tools required” setup for fast and secure calibration in the field.
Trust the Fluke 700G Series Pressure Gauge Calibrators for unmatched performance, ruggedness, and reliability. When accuracy and efficiency matter most, choose the Fluke 700G—your field calibration solution.
(0 reviews)