FLUKE 1AC II Non-Contact Voltage Tester
- Be aware of voltage easily – the tip glows red and a beeper sounds when voltage is detected
- Continuous self-test so you always know it’s working
- Voltage detection range for wide application use – 90 V to 1000 V AC or 200 V to 1000 V AC
- Audible/Silent mode for added convenience
Related products
-
Diagnostic ToolsKLEIN TOOLS Test Kit with Multimeter, Non-Contact Volt Tester, Receptacle Tester
- Multimeter measures up to 600V AC/DC voltage, 10A DC current and 2MΩ resistance
- Non-Contact Voltage Tester Cat. No. NCVT1P has a bright green LED to indicate the tester is working; it changes to red and audible tones sound when a voltage is detected
- NCVT1P has a high-intensity, bright red LED that illuminates and an audible tone when a voltage is detected from the 50 to 1000V AC power operating range
- Receptacle tester detects wiring configurations and indicates correct wiring, as well as identifying common wiring faults
- Identifies open ground, open hot, open neutral, hot/ground reversed; it does not indicate quality of the ground, multiple hot wires, or a combination of defects
- MM300 multimeter tests continuity with visual and audible continuity indicators
- Test leads included for Cat. No. MM300; batteries included for Cat. Nos. NCVT1P and MM300
(0 reviews) -
Diagnostic ToolsKLEIN TOOLS Digital Multimeter Electrical Test Kit
- Digital Multimeter measures up to 600V AC/DC voltage, 10A DC current and 2 ohm resistance
- Meter also test batteries, diodes and continuity
- Voltage Tester NCVT-3P has dual-range capabilities to detect from 12 to 1000V AC or 70 to 1000V AC for a broad variety of low-voltage or standard voltage applications
- Bright torch illuminates work area and may be used independent of the NCVT-3P voltage detection function
- ET45 tests AC voltages from 28V to 240V AC at four useful levels aligned with commonly used residential voltages, and DC voltages from 32V to 330V at four common levels
- Built-in test lead holders on back of ET45 hold the leads in one of two positions: one so that they are spaced correctly to test tamper-resistant US-style outlets; and the other for the convenient storage of the test leads
- RT210 detects the most common wiring problems in standard and GFCI receptacles including open ground, reverse polarity, open hot, open neutral and hot/ground reversed
- Receptacle tester works on GFCI outlets and confirms the operation of the ground fault protective device
(0 reviews) -
Voltage DetectorsMILWAUKEE Non-Contact Voltage Detector w/ Laser Infrared Thermometer
The Non-Contact Voltage Detector w/ Laser Infrared Thermometer is specifically designed for residential and commercial Electrical ansd HVAC applications. The Voltage Detector provides visual and audible indicators to detect AC voltage between 12 and 1000V and has an industry leading safety rating of CAT IV 1000V. With a temperature detection range from -30˚ to 250˚C, users can identify the correct thermometer reading in all applicable Electrical and HVAC settings. The LCD backlit display provides a clear and accurate temperature reading.
(0 reviews)
