Additional information
| Size/Container | 50ml Tube, 250ml Tube |
|---|
CHEMTOOLS Rapidstick™ 8-5811 Thread Sealant (Gas & Potable Water, Variable Pressure)
Rapidstick™ 8-5811 Thread Sealant (Gas & Potable Water, Variable Pressure)
Rapidstick™ 8-5811 Anaerobic Thread Sealant is a Class III methacrylate ester compound offering immediate low pressure resistance for all metal threads on pipes, joints, and fittings with variable pressures and alternating temperatures. It provides excellent lock and seal properties to resist loosening and leakage during testing and after full cure. Suitable for use on all active metals without the need for priming, its excellent thixotropic nature prevents migration.
8-5811 is a soft setting sealant with a potable water safe formulation that protects against corrosion, shock, and vibration. It will not creep, shrink, gall, migrate, or block systems, and is an excellent sealant for gases, water, LPG, hydrocarbons, oils, and other chemicals.
Note: It is recommended to prime inactive metals first with Rapidstick™ Anaerobic Adhesives Primer.
Specifications (refer to TDS for full details)
- Colour: Transparent Yellow
- Disassembly Strength: Medium
- Viscosity: 24,000 – 80,000 Thixotropic (Low)
- Thread Filling: Up to 76mm (3”)
- Handling Cure Time: 10 – 30 minutes
- Temperature Range (°C): -54 to +148
Related products
-
CRCCRC Mass Air Flow Sensor Cleaner 300g
Most fuel injected vehicles are fitted with a mass air flow (MAF) sensor to measure air velocity which the computer uses to determine the proper air/fuel mixture. However, the MAF sensor gets dirty with debris, oil, grease and air filter fibres, causing inaccurate measurements of air flow which results in a ‘rich’ running engine, loss of power and excess emissions. CRC MAF Sensor Cleaner will safely clean and protect your mass air flow sensor, improving air/fuel ratio and increasing kilometres per litre. The use of aggressive products like brake and carburettor cleaners on MAF sensors can cause serious damage to sensitive parts.
Recommended as a safe and effective way to clean delicate MAF sensors in modern vehicles
Cleans & protects MAF Sensors – will not damage MAF sensors or housing (unlike other chemicals). Plastic safe & residue free – evaporates in seconds. Improves air/fuel ratio. Increases km/litre – improves fuel economy. Increases/restores horsepower
(0 reviews) -
CRCCRC Hot Shot Degreaser 500g
CRC Hot Shot Degreaser is a highly concentrated, self-emulsifying solvent degreaser specially formulated to quickly cut and remove grease, oil and dirt on all types of equipment.
Recommended for cleaning and degreasing automobile engines, industrial equipment, farm equipment, lawn mowers, garage floors and tools
Quickly dissolves grease, oil and dirt. Cleans iron, steel, aluminium, magnesium and copper. Not harmful to metal, rubber, plastic or concrete. Rinses off easily with water. 360° Aerosol valve for ease of application.
(0 reviews) -
Chemicals, Lubricants & AdhesivesSIKA Sika® Primer-3 N
Sika® Primer-3 N is a one component, transparent primer for porous surfaces and metalSika® Primer-3 N is a solvent-based, 1-component primer.
- Easy to apply
- Water repellent
- Short flash-off time
Sika® Primer-3 N is designed for Sikaflex®, SikaHyflex®, SikaBond® and Sikasil® products used on porous substrates (e.g. concrete) and metals.Advantages
- Easy to apply
- Water repellent
- Short flash-off time
(0 reviews) -
Chemicals, Lubricants & AdhesivesSIKA Sika® Primer-206 G+P
Pigmented, solvent-based primer for various substratesSika® Primer-206 G+P is a solvent-based black primer, which reacts with moisture and forms a thin layer. This layer acts as a link between substrates and adhesives.
Sika® Primer-206 G+P is specifically formulated for the treatment of bond faces prior to application of Sika’s 1-component Polyurethanes.- Enhanced adhesion on a wide variety of substrates
- Easy to apply
Usage
Sika® Primer-206 G+P is used to improve adhesion on substrates such as float glass, ceramic-coated glass, pre-coatings, painted surfaces and some plastics and metals.
Seek manufacturer’s advice and perform tests on original substrates before using Sika® Primer-206 G+P on materials prone to stress cracking.
This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.(0 reviews)