TQB
Showing 73–108 of 221 results
-
Wheel, Dollies & SuspensionTQB BRANDS Giant OTR Bead Breaker 13000kg
The Borum Industrial Hydraulic Giant OTR Tyre/Earthmover Bead Breaker is designed to work on most multi-piece rims 25-51″ in diameter with pry bar pockets. Delivers up to 13,000kg of force with up to 10,000psi to break the toughest beads in seconds. Clamps to the wheel rim and utilises hydraulic pushrod to break the bead.The giant bead breaker works directly on the bead of the tyre and will not damage the tyre if used correctly.
The bead breaker works directly on the bead of the tyre and will not damage the tyre if used correctly when used with the optional TradeQuip 2054T 10,000 psi air/hydraulic pump and the Eagle Pro EH-8206F Hydraulic Hose With Coupler.
Features
- Economical solution for earthmover wheels 25” – 51” multi-piece rims with pry bar pockets
- Hydraulically clamps on wheel
- Design prevents lip kicking out
- Durable steel construction
- Lightweight, compact and portable design is safe and easy to use
- Hydraulic power breaks stubborn beads in seconds
Specifications
- Safe Working Capacity: 13,000kg
- Rated Pressure: 10,000psi
- Suitable for OTR Earthmover Rim Sizes: 25 – 51″ Diameter
- Pressure Connection: 3/8″ – 18NPTF
- Used on 5-piece rims 635 to 1,295 mm (25” – 51”) with pry bar / bead loosening pockets
- Ram Stroke: 105mm (4-1/4”) stroke ram
- Hydraulic Oil Capacity: 500ml
- Weight: 13kg
- Carton: 485x185x130mm
Intended Use
Designed to be used for separating tyres from rims on a large range of tyre and rim combinations on tractors, trucks, buses, earth movers or other similar vehicles. The inner-most surface of the tyre bead creates the air seal between the tyre and rim.
(0 reviews) -
Blasting EquipmentTQB BRANDS Glass Beads Media Abrasive
The TradeQuip “Made for the Trade” Glass Bead Blasting Media Abrasive is designed for use in conjunction with our TradeQuip Mobile Blasting Kits and Blasting Cabinets. Glass beads are used for general cleaning, peening and cosmetic finishing of sensitive metal surfaces; removing automotive paint; brightening grout and removing fungus and calcium deposits from tile; polishing cast iron, stainless steel, aluminium, propellers and turbine blades. Glass Beads are environmentally friendly and can be used in many blast applications to provide a finish with no profile. Use while working with metal, plastic or rubber materials to clean, debur and finish. It has been specified for use with TradeQuip “Made for the Trade blasting equipment.
Features
- Ideal for cosmetic finishing of sensitive materials
- Low consumption rate
- Can be recycled
- No contamination of metal being treated
- Broad range of applications
- Used for general maintenance and cleaning
- Ideal for tile cleaning and brightening grout
- Widely used for car panel sandblasting, machinery cleaning, parts restoration
Specifications
- Mesh: 106/300
- Shape: Rounded
- Hardness: 5.5 – 6.0 MOHS
- Density: 2.5 SG
- Blasting Speed: Up to 3.7 m2/hr
- Dust Factor: Nil
- Recyclability: 7/10
- Profile Range: 6.35 – 25.4 µ
- Consumption Rate: N/A
- Weight: 25kg
NOTE: We recommend the use of personal protective equipment. Always wear a respiratory filter or mask over your mouth when operating this unit. You will create a cloud of abrasive media material and debris which should not be inhaled.
Choosing the right abrasive media
Crushed Glass
Crushed Glass or Glass Beads would have to be one of the most popular forms of blast media and can be used on a variety of dustless blasting and abrasive blasting projects across all industry sectors. Using crushed glass means you know you are using a eco friendly and recycled product that helps the environment. If you’re looking to achieve a smooth, bright finish, glass beads can be your best option. Glass beads are also recyclable and can be used up to 100 times before replacement, making them an extremely cost-effective option. Glass bead media works well on soft metals like aluminium and brass as well as plastic. Works with a blasting gun or in a blast cabinet.
(0 reviews) -
Wheel, Dollies & SuspensionTQB BRANDS Heavy Duty Wheel Dolly Lifter 1200kg
This Borum Industrial Hydraulic 1200kg Heavy Duty Wheel Dolly Lifter is designed for the removal, installation and transportation of large truck, earthmoving, tractor and agricultural commercial tyre and wheel combinations. Hydraulically activated lift arms handle wheel assemblies from 1000mm up to 2000mm in wheel diameter. Four ball bearing mounted castor wheels provide positive stability and easy manoeuvrability. Quadruple bearing mounted lift rollers easily rotate vehicle rim & tyre for bolt pattern alignment while the integrated tyre clamp support arm keeps the wheel secured in place.
Features:
- Hydraulic system actuated to provide smooth, positive power for the removal and installation of large commercial wheel & tyre combinations
- Heavy duty steel frame adjusts laterally to allow precise positioning of commercial truck, earthmoving, agricultural & tractor tyres along with the wheel rollers for further control.
- Supports heavy commercial rims and tyres up to 1200kg
- Rolls easily on four quality steel bearing castors
- Includes heavy duty adjustable support arm to keep load secure
- Integrated locking pin secures the dolly to relieve hydraulic pressure under load
- Lead-free paint is applied to ensure a long-lasting finish and prevent corrosion
- Paint finish is oil, grease and dirt-resistant for easy cleanup
Specifications:
- Safe Working Capacity: 1200kg
- Min. Tyre Diameter: 1000mm
- Max. Tyre Diameter: 2000mm
- Lifting Range: 0 – 750mm
- Roller Length: 490mm
- Roller Diameter: 80mm
- Roller Table Area: 490 x 320mm
- Caster Wheel Diameter: 150mm
- Ground Clearance (Rollers Lowered): 90mm
- Jack Handle & Positioning Handle Length: 1000mm
- Minimum Footprint (Jack Handle Extended Out & Support Arm Vertical): 2000(L) x 1000(D) x 1340(H)mm
- Maximum Footprint (Jack Handle Extended Out & Support Arm Vertical): 2500(L) x 1000(D) x 2100(H)mm
- Crate Dimensions: 1340(L) x 1030(W) x 330(H)mm
- Nett Weight: 113kg
- Gross Weight: 143kg
Intended Use
Designed to facilitate the removal and installation of pneumatic tyres and wheel assemblies on earth movers, trucks, buses, agricultural machinery and trailers up to 1200kg & 2000mm diameter.
(0 reviews) -
Trolleys & CreepersTQB BRANDS Heavy Duty Wide-Track Creeper 180kg
The eQuipt “Designed to Deliver” heavy duty wide-track creeper is ideal for use in commercial premises such as mechanics and panel beaters workshops, car dealerships, as well as home garages. Built for reliability, this heavy-duty creeper features a robust 180kg load capacity. The wide-track design includes a vinyl cushion with dedicated padded support for the head, neck, and lumbar regions. Four smooth-rolling 130mm swivel castors provide effortless maneuverability and stability on workshop floors.
Features
- Wide vinyl cushion
- Padded head, neck and lumbar support
- Four smooth-rolling 5” swivel castors
Specifications
- Safe Working Capacity: 180kg
- Swivel Castors: 4 x 130mm
- Dimensions: 1110(L) x 480(W) x 175(H)mm
- Carton: 1030 x 500 x 90mm
- Weight: 9kg
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use jack stands.
(0 reviews) -
Hand ToolsTQB BRANDS Hydraulic Ball Joint Tool
The TradeQuip “Made for the Trade” Hydraulic Ball Joint Tool is designed for the safe and efficient removal of ball joints, tie rod ends, steering knuckles and control arms. Featuring a powerful 10,000kg hydraulic ram, it delivers controlled force without the need for excessive hammering, helping reduce the risk of component damage. The heavy-duty construction and interchangeable fork adaptors provide versatility across a wide range of automotive suspension and steering applications, making it an ideal addition to any professional workshop.
Features
- Heavy Duty Construction
- Hydraulic Capacity: 10,000kg
- Non-Destructive Design
- Includes Interchangeable Fork Adaptors
- Streamlined Operation
Specifications
- Capacity: 10,000kg
- Included Adaptor Sizes: 17-22, 19-28, 26-32, 30-36 (mm)
- Gross Weight: 6.4kg
- Net Weight: 4.8kg
- Carton Dimensions: 360(L) x 330(W) x 120(H)mm
Intended Use
Ball Joints, Tie Rod Ends, Steering Knuckles and Control Arms
(0 reviews) -
Hand ToolsTQB BRANDS Hydraulic Bushing & Bearing Service Kit – 49pce
The TradeQuip “Made for the Trade” Hydraulic Bushing & Bearing Service Kit is a professional 49-piece workshop solution designed for the removal and installation of bushes, bearings, seals and other press-fit components without causing damage to surrounding assemblies. Featuring an 18,000kg hydraulic ram, a comprehensive range of sleeves and four threaded spindles, this kit provides precise alignment and controlled force for efficient servicing of vehicle suspension, driveline and mechanical components. The versatile universal design eliminates the need for hammering and reduces the risk of component damage during installation and removal. Compatible with the TradeQuip 2054T Air/Hydraulic Foot Pedal (sold separately), the kit delivers fast and effortless hydraulic operation, making it ideal for professional automotive workshops and maintenance facilities. Supplied in a durable storage case for convenient organisation, storage and transport.
Features
- Includes 4 threaded spindles
- Comprehensive range of sleeves
- Versatile universal application
- Complete 49-piece set
- Compatible with the TRADEQUIP 2054T air/hydraulic foot pedal – Not included in the TQ39-0180 kit
Specifications
- Ram Capacity: 18,000kg
- Included Sleeve Sizes: 18-60 mm(ID), 26-68 mm(OD) – (2 mm increments)
- Included Spindle Sizes: M10 x P1.5, M12 x P1.75, M14 x P2.0, M16 x P2.0
- No. of Pieces: 49
- Carton Dimensions: 890(L) x 380(W) x 170(H)mm
- Net Weight: 30kg
- Gross Weight: 31kg
(0 reviews) -
Garage JacksTQB BRANDS Hydraulic Garage Jack 3,000kg
This TradeQuip “Made for the Trade” Professional Quality low profile 2906T Garage Jack with twin piston ‘quick lift’ technology provides extra lift per pump of the handle. Fast lowering two-piece twist handle is fitted with a foam bumper preventing possible panel damage when being pumped. With a knurled steel handle for a steady grip and a solid, rolled edge welded steel construction, this heavy duty quick lift dual pump garage jack is built to last.
Features:
- Tested in Australia ensuring full compliance with Mandatory Australian Standard AS2615:2016
- Professional quality rugged steel construction
- Low profile and deep reach
- 1400mm long handle for deeper reach
- Dual pump lift technology for a quicker lift
- Internal bypass valve overload protection
- Lead-free paint finish to ensure a long lasting finish and prevent rust
- Paint is oil, grease and dirt-resistant
- Protective foam handle cover prevents vehicle damage
Specifications:
- Safe Working Capacity: 3,000kg
- Minimum Height: 118mm
- Maximum Height: 488mm
- Handle Length: 1400mm
- Front Castors: 90mm diameter – 40mm width
- Rear Castors: 60mm diameter – 25mm width
- Saddle Diameter: 115mm
- Dimensions: 670mm(L) x 380mm(W) x 170mm(H)
- Weight: 43kg
NOTE: This Garage Jack must only be used on hard level surfaces and be free to roll during lifting and lowering. DO NOT get under a vehicle that is only supported by this Garage Jack. ALWAYS USE JACK STANDS!
WARNING: Always ensure the vehicle wheels are chocked before lifting.This Garage Jack is a lifting and lowering device only and is designed for lifting part of the total vehicle. Do not move or dolly the vehicle whilst the vehicle is on this Garage Jack.
Intended Use
A heavy-duty floor jack designed for lifting and lowering (NOT SUPPORTING) loads in an automotive workshop with added capacity and maximum lift height required to handle most UTES, SUV’s and light commercial vehicles.
(0 reviews) -
Workshop Presses & AccessoriesTQB BRANDS Hydraulic Press 30,000kg
This “Borum” “Industrial” 30,000kg Hydraulic Workshop Press is perfect for straightening, stamping, bending and pressing any component that is hard to handle. The high quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to compress the load, helping to reduce wear and extend service life. Polished inner cylinder walls extend the life of the hydraulic seals to minimise abrasion and wear. A polished and chromed cylinder ram and piston is guided by superior performance seals, wear rings and dust seals. Fitted with an integrated overload protection valve the ram is powered by a manual two-speed pump, and the non-slip bed winch features a steel cable roller for easy raising and lowering of the press bed. Designed with a superior quality oil filled dial gauge for accurate dual metric/tons pressure readings. To protect the operator against unexpected hazards during operation, this press is fitted with a heavy duty safety guard. Made of steel mesh in a mild steel frame it provides operator safety and visibility.
“Borum” “Industrial” Hydraulic Workshop Presses are available in a variety of capacities and sizes. The all-welded steel press frames are designed for maximum strength, reliability and durability, provide optimum rigidity to prevent flexing under maximum load. These strong frames and powerful high-pressure hydraulics will provide years of dependable service in most industrial applications. When components need to be removed or assembled, “Borum” “Industrial” hydraulic presses deliver the controlled power to safely remove and install bearings, gears, U-joints, bushings, ball joints and pulleys with precision and versatility! (Previous models include product code/s; BPROSP30T)
Features:
- Heavy-duty H-frame manufactured of superior-grade steel to exacting standards for industrial quality and durability
- 2 speed foot & hand pump operates the ram at a slow or fast speed to improve operator efficiency
- Non-slip bed winch and steel cable roller offers easy raising and lowering of the press bed
- Steel mesh safety cage provides operator safety and visibility
- 100mm pressure gauge ensures accurate monitoring
- Superior quality hydraulic cylinder unit requires lower oil pressure to apply load, reducing wear and extending service life
- Treated & polished ram is fitted with heavy duty backup ring, preventing bypass oil drift
- Superior quality hydraulic oil, improves corrosion resistance and high/low temperature flexibility
- Integrated overload protection eliminates overloading
- Double spring ram return for fast ram retraction
- Lead-free paint for a long-lasting finish and to minimise corrosion
- Oil, grease and dirt-resistant paint finish for easy cleanup
- Pair of bed plates included
Specifications:
- Safe Working Capacity: 30,000kg
- Working Range: 151-1031mm
- Overall Height: 1830mm
- Overall Width: 865mm
- Overall Depth: 700mm
- Bed Inside: 164mm
- Bed Width: 535mm
- Bed Surface Depth: 184mm
- Width Between Side Posts: 140mm
- Piston Ram Stroke: 150mm
- Ram Diameter: 80mm
- Bed Height Settings: 8
- Nett Weight: 182kg
- Crate: 1920 x 780 x 270mm
- Gross Weight: 203kg
Intended Use:
Ideal for straightening, stamping, bending and pressing any component that is difficult to handle.
(0 reviews) -
Workshop Presses & AccessoriesTQB BRANDS Hydraulic Press 45,000kg
This “TradeQuip “Made for the Trade” 45,000kg Hydraulic Workshop Press is perfect for straightening, stamping, bending and pressing any component that is hard to handle. With it’s very wide 826mm bed width and 195mm inside bed gap this press becomes one of the most diverse Workshop Press in the TradeQuip range. The ram is powered by a manual two-speed pump, and the non-slip bed winch features a steel cable roller for easy raising and lowering of the press bed.
“TradeQuip “Made for the Trade” Hydraulic Workshop Presses are available in a variety of capacities and sizes. The all-welded steel press frames are designed for maximum strength, reliability and durability, provide optimum rigidity to prevent flexing under maximum load. These strong frames and powerful high-pressure hydraulics will provide years of dependable service in most industrial applications. When components need to be removed or assembled, “TradeQuip “Made for the Trade” hydraulic presses deliver the controlled power to safely remove and install bearings, gears, U-joints, bushings, ball joints and pulleys with precision and versatility!
Features:
- Heavy-duty high-grade steel frame
- 100mm pressure gauge
- Bed winch for easy raise and lower adjustment
- Lead-free paint finish to help prevent rust
- Paint is oil, grease and dirt-resistant
- Hand winch for fast height adjustment
Specifications:
- Safe Working Capacity: 45,000kg
- Working Range: 159-859mm
- Overall Height: 1707mm
- Overall Width: 1420mm
- Overall Depth: 826mm
- Width Between Side Posts: 186mm
- Bed Surface Depth: 359mm
- Bed Inside: 195mm
- Bed Width: 826mm
- Piston Ram Stroke: 190mm
- Ram Diameter: 90mm
- Bed Height Settings: 6
- Nett Weight: 296kg
- Carton: 1040 x 390 x 1900mm
- Gross Weight: 335kg
Intended Use
Ideal for straightening, stamping, bending and pressing any component that is difficult to handle.
(0 reviews) -
Porta Powers & Panel RepairTQB BRANDS Hydraulic Ram Kit
This TradeQuip “Made for the Trade” Hydraulic Ram Kit includes 2 puller rams and 5 pusher rams for lifting, pushing, pulling, bending, and straightening. A must for a variety of auto body, frame repair, and construction jobs. Ram and cylinder bearings are designed for protection against off-centre load stresses. High flow quick-connect coupler with dust cap. (Previous models include product code/s; RAMKIT)
TradeQuip quality multi-purpose hydraulic rams are used for automotive, truck, farm and heavy equipment repair. Quality steel design with high gloss enamel coating for durability and longevity.
* Requires hydraulic pump, hoses and fittings, sold separately.
Features
- Used for pulling, pushing, bending, lifting, straightening and spreading operations in auto body and heavy equipment frame repair
- Hardened, heat treated steel design for durability and long service life
- High gloss enamel coating to prevent corrosion
- Uses a common 1/4″ NPT attachment to connect to a hydraulic pump for up to 10,000kg of pneumatic power
- Comes in blow mould case for convenient organisation and storage
- Individual rams available separately
- Can be used with TradeQuip 2054T (requires adaptors, sold separately)
Set Includes:
Non-spring Return
- 2,000kg Mini Ram – Compressed 139mm > Stroke 76mm > Working Pressure 5792psi
- 4,000kg Mini Ram – Compressed 42mm > Stroke 16mm > Working Pressure 9235psi
Spring Return
- 10,000kg Mini Ram – Compressed 118mm > Stroke 60mm > Working Pressure 8939psi
- 4,000kg Porta Power Ram – Compressed 276mm > Stroke 132mm > Working Pressure 8045psi
- 10,000kg Porta Power Ram – Compressed 350mm > Stroke 150mm > Working Pressure 8045psi
- 2,000kg Pull Back Ram – Extended 409mm > Stroke 128mm > Working Pressure 7887psi
- 5,000kg Pull Back Ram – Extended 483mm > Stroke 130mm > Working Pressure 9669psi
- 2 x 2,000kg 360º Swivel Double-End Hooks
- 2 x 5,000kg 360º Swivel Double-End Hooks
- Blow Mould Carry Case: 530 x 500 x 110mm
- Weight: 24kg
- Carton: 700 x 485 x 125mm
Intended Use
For medium duty applications when used in conjunction with a good quality manual hydraulic pump, hose and fittings.
(0 reviews) -
Workshop Presses & AccessoriesTQB BRANDS Hydraulic Workshop Press 20,000kg
The TradeQuip “Made for the Trade” Hydraulic Workshop Press is great for straightening, stamping, bending and pressing any component that is hard to handle. The polished inner cylinder walls extend the life of the hydraulic seals to minimise abrasion and wear, while the cylinder ram and pistons are also polished and chromed, guided by high performance seals, wear rings and dust seals. It is ideal for a variety of workshop applications and in particular suited to agricultural or industrial use. Jobs such as straightening, ending, folding, punching, removing bolts and bearings etc, are some of the tasks that can be easily accomplished.
(Previous models include product code/s; 1069T)
Features:
- Heavy-duty H-frame constructed of high-grade steel and built to exacting standards for quality and durability
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint finish is oil, grease and dirt-resistant for easy cleanup
- High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life
- Piston-ram is treated and polished for extended life
- Reinforced head bolster for added strength
- Pair of bed plates included
Specifications:
- Safe Working Capacity: 20,000kg
- Working Range: 43 – 882mm
- Overall Height: 1795mm
- Overall Width: 780mm
- Overall Depth: 690mm
- Bed Width: 505mm
- Bed Gap: 105mm
- Bed Inside Working Area: 358 x 105mm
- Press Head Cap Diameter: 45mm
- Press Head Cap Length: 17mm
- Piston Ram Stroke: 185mm
- Ram Lateral Adjustment: 180mm
- Nett Weight: 90kg
- Crate: 1550 x 280 x 240mm
- Gross Weight: 110kg
Intended Use:
Ideal for straightening, stamping, bending and pressing any component that is difficult to handle.
(0 reviews) -
Workshop Presses & AccessoriesTQB BRANDS Hydraulic Workshop Press 30,000kg
The TradeQuip “Made for the Trade” Hydraulic Workshop Press is great for straightening, stamping, bending and pressing any component that is hard to handle. The polished inner cylinder walls extend the life of the hydraulic seals to minimise abrasion and wear, while the cylinder ram and pistons are also polished and chromed, guided by high performance seals, wear rings and dust seals. It is ideal for a variety of workshop applications and in particular suited to agricultural or industrial use. Jobs such as straightening, ending, folding, punching, removing bolts and bearings etc, are some of the tasks that can be easily accomplished.
(Previous models include product code/s; 1070T)
Features:
- Heavy-duty H-frame constructed of high-grade steel and built to exacting standards for quality and durability
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint finish is oil, grease and dirt-resistant for easy cleanup
- High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life
- Piston-ram is treated and polished for extended life
- Reinforced head bolster for added strength
- Pair of bed plates included
Specifications:
- Safe Working Capacity: 30,000kg
- Working Range: 50 – 1030mm
- Overall Height: 1950mm
- Overall Width: 830mm
- Overall Depth: 660mm
- Bed Width: 455mm
- Bed Gap: 154mm
- Bed Inside Working Area: 230 x 154mm
- Bed Cage Bolt Holes: 422 x 80mm
- Press Head Diameter: 56mm
- Load Cap Length: 17mm
- Jacking Handle Length: 639mm
- Ram Lateral Adjustment: 70mm
- Piston Ram Stroke: 170mm
- Nett Weight: 138kg
- Crate: 1700 x 510 x 300mm
- Gross Weight: 168kg
Intended Use:
Ideal for straightening, stamping, bending and pressing any component that is difficult to handle.
(0 reviews) -
Bottle JacksTQB BRANDS Industrial Bottle Jack – 20,000kg
This powerful, heavy-duty Borum Industrial Hydraulic Bottle Jack with high quality glide-action pressure pump is designed for hard-hitting commercial use, making large loads easy to lift. The lightweight jack is ideal for lifting farm vehicles, heavy-duty machinery, industrial construction equipment and more. High quality, fitted with unique overload protection system and large stable base, this unit is ideal for daily use in a demanding environment.
Fitted with a safety overload valve for extra protection, the safety valve is installed between the pump and high-pressure check valve in the barrel/lift ram assembly. When attempting to raise a load greater than the jack’s capacity, the safety valve opens on each pump stroke and diverts any further oil back to the reservoir thus preventing the raising of the load.
The Borum BR02 series Bottle Jacks can be used horizontally when the pump is positioned above the ram housing or lying on their side with the pump positioned as per the illustrations below. Refer to the owners manual for more information.
Features
- Machined and polished cylinders with die-cut threads provide non-abrasive leak-free, durable performance
- Fabricated from hard-cast steel with heat-treated critical stress areas
- Specially designed internal hydraulics allow the jack to be operated vertically & horizontally
- Unique cross-type forged release valve assures positive load control
- Overload protection built into the hydraulic system ensures user safety
- 3-piece galvanised steel handle allows for easy & compact storage
Specifications
- Safe Working Capacity: 20,000kg
- Minimum Height: 270mm
- Maximum Height: 420mm
- Handle: 3-piece galvanised steel
- Carton: 231L x 182W x 294H mm
- Gross Weight: 12.6kg
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use support stands.
Intended Use
For heavy duty use on truck, agriculture, construction, mining, automotive, and marine applications where lifting and lowering is required.
(0 reviews) -
Bottle JacksTQB BRANDS Industrial Bottle Jack – 30,000kg
This powerful, heavy-duty Borum Industrial Hydraulic Bottle Jack with high quality glide-action pressure pump is designed for hard-hitting commercial use, making large loads easy to lift. The lightweight jack is ideal for lifting farm vehicles, heavy-duty machinery, industrial construction equipment and more. High quality, fitted with unique overload protection system and large stable base, this unit is ideal for daily use in a demanding environment.
Fitted with a safety overload valve for extra protection, the safety valve is installed between the pump and high-pressure check valve in the barrel/lift ram assembly. When attempting to raise a load greater than the jack’s capacity, the safety valve opens on each pump stroke and diverts any further oil back to the reservoir thus preventing the raising of the load.
The Borum BR02 series Bottle Jacks can be used horizontally when the pump is positioned above the ram housing or lying on their side with the pump positioned as per the illustrations below. Refer to the owners manual for more information.
Features
- Machined and polished cylinders with die-cut threads provide non-abrasive leak-free, durable performance
- Fabricated from hard-cast steel with heat-treated critical stress areas
- Specially designed internal hydraulics allow the jack to be operated vertically & horizontally
- Unique cross-type forged release valve assures positive load control
- Overload protection built into the hydraulic system ensures user safety
- 3-piece galvanised steel handle allows for easy & compact storage
Specifications
- Safe Working Capacity: 30,000kg
- Minimum Height: 280mm
- Maximum Height: 445mm
- Handle: 3-piece galvanised steel
- Carton: 241L x 165W x 315H mm
- Gross Weight: 19kg
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use support stands.
Intended Use
For heavy duty use on truck, agriculture, construction, mining, automotive, and marine applications where lifting and lowering is required.
(0 reviews) -
Bottle JacksTQB BRANDS Industrial Bottle Jack – 50,000kg
This powerful, heavy-duty Borum Industrial Hydraulic Bottle Jack with high quality glide-action pressure pump is designed for hard-hitting commercial use, making large loads easy to lift. The lightweight jack is ideal for lifting farm vehicles, heavy-duty machinery, industrial construction equipment and more. High quality, fitted with unique overload protection system and large stable base, this unit is ideal for daily use in a demanding environment.
Fitted with a safety overload valve for extra protection, the safety valve is installed between the pump and high-pressure check valve in the barrel/lift ram assembly. When attempting to raise a load greater than the jack’s capacity, the safety valve opens on each pump stroke and diverts any further oil back to the reservoir thus preventing the raising of the load.
The Borum BR02 series Bottle Jacks can be used horizontally when the pump is positioned above the ram housing or lying on their side with the pump positioned as per the illustrations below. Refer to the owners manual for more information.
Features
- Machined and polished cylinders with die-cut threads provide non-abrasive leak-free, durable performance
- Fabricated from hard-cast steel with heat-treated critical stress areas
- Specially designed internal hydraulics allow the jack to be operated vertically & horizontally
- Unique cross-type forged release valve assures positive load control
- Overload protection built into the hydraulic system ensures user safety
- 3-piece galvanised steel handle allows for easy & compact storage
Specifications
- Safe Working Capacity: 50,000kg
- Minimum Height: 300mm
- Maximum Height: 482mm
- Handle: 3-piece galvanised steel
- Carton: 255L x 245W x 315H mm
- Gross Weight: 35.8kg
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use support stands.
Intended Use
For heavy duty use on truck, agriculture, construction, mining, automotive, and marine applications where lifting and lowering is required.
(0 reviews) -
Bottle JacksTQB BRANDS Industrial Squat Bottle Jack – 20,000kg
This powerful, heavy-duty Borum Industrial Hydraulic Bottle Jack with high quality glide-action pressure pump is designed for hard-hitting commercial use, making large loads easy to lift. The lightweight jack is ideal for lifting farm vehicles, heavy-duty machinery, industrial construction equipment and more. High quality, fitted with unique overload protection system and large stable base, this unit is ideal for daily use in a demanding environment.
Fitted with a safety overload valve for extra protection, the safety valve is installed between the pump and high-pressure check valve in the barrel/lift ram assembly. When attempting to raise a load greater than the jack’s capacity, the safety valve opens on each pump stroke and diverts any further oil back to the reservoir thus preventing the raising of the load.
The Borum BR02 series Bottle Jacks can be used horizontally when the pump is positioned above the ram housing or lying on their side with the pump positioned as per the illustrations below. Refer to the owners manual for more information.
Features
- Machined and polished cylinders with die-cut threads provide non-abrasive leak-free, durable performance
- Fabricated from hard-cast steel with heat-treated critical stress areas
- Specially designed internal hydraulics allow the jack to be operated vertically & horizontally
- Unique cross-type forged release valve assures positive load control
- Overload protection built into the hydraulic system ensures user safety
- 3-piece galvanised steel handle allows for easy & compact storage
Specifications
- Safe Working Capacity: 20,000kg
- Minimum Height: 183mm
- Maximum Height: 305mm
- Handle: 3-piece galvanised steel
- Carton: 231L x 182W x 294H mm
- Gross Weight: 9.2kg
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use support stands.
Intended Use
For heavy duty use on truck, agriculture, construction, mining, automotive, and marine applications where lifting and lowering is required.
(0 reviews) -
Stands & RampsTQB BRANDS Jack Stand (Short) 15,000kg
The BORUM Industrial Ultra Heavy Duty Jack Stand is a reinforced pin style jack stand with industrial quality design and support bracing system to sustain heavy loads up to 15,000kg. Adjusts to match the job with a 445mm minimum lift height and 631mm maximum lift height !! Featuring an Ultra Heavy-Duty Industrial design, these tough stands are ideal for construction, farm, truck, bus, earth moving equipment and fleet vehicle maintenance workshop use.
Features
- Manufactured from high-grade steel and built to exacting standards for quality and durability
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy cleanup
- High strength locking pin
- Controlled pin holes for easy height adjustments
- Turned post slide for easy quick adjustments
- Heavy-gauge steel Gusseted uprights prevent distortion or twisting
- Rugged base provides plenty of stability
- Conveniently located carry handle
- Sold individually (not in pairs)
Specifications
- Safe Working Capacity: 15,000kg (individually rated but must be used in pairs for safe usage)
- Maximum Height: 631mm
- Minimum Height: 445mm
- Adjustable increments: 60mm
- Saddle Width: 140mm
- Base Dimensions: 300 x 330mm
- Carton: 470 x 380 x 380mm (Single unit)
- Weight: 23.5kg (each)
Intended Use
Heavy duty fleet and maintenance workshops where a lifted vehicle or trailer is to be supported before conducting servicing or repair work.
NOTE: Sold individually but recommended to be used in pairs
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use jack stands.
(0 reviews) -
Stands & RampsTQB BRANDS Jack Stand (Short) 25,000kg
The BORUM Industrial Ultra Heavy Duty Jack Stand is a reinforced pin style jack stand with industrial quality design and support bracing system to sustain heavy loads up to 25,000kg. Adjusts to match the job with a 415mm minimum lift height and 539mm maximum lift height !! Featuring an Ultra Heavy-Duty Industrial design, these tough stands are ideal for construction, farm, truck, bus, earth moving equipment and fleet vehicle maintenance workshop use.
Features
- Manufactured from high-grade steel and built to exacting standards for quality and durability
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy cleanup
- High strength locking pin
- Controlled pin holes for easy height adjustments
- Turned post slide for easy quick adjustments
- Heavy-gauge steel Gusseted uprights prevent distortion or twisting
- Rugged base provides plenty of stability
- Conveniently located carry handle
- Sold individually (not in pairs)
Specifications
- Safe Working Capacity: 25,000kg (individually rated but must be used in pairs for safe usage)
- Maximum Height: 539mm
- Minimum Height: 415mm
- Adjustable increments: 65mm
- Base Dimensions: 300 x 330mm
- Carton: 430 x 380 x 380mm (Single unit)
- Weight: 24.4kg (each)
Intended Use
Heavy duty fleet and maintenance workshops where a lifted vehicle or trailer is to be supported before conducting servicing or repair work.
NOTE: Sold individually but recommended to be used in pairs
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use jack stands.
(0 reviews) -
Stands & RampsTQB BRANDS Jack Stand 15,000kg
The BORUM Industrial Ultra Heavy Duty Jack Stand is a reinforced pin style jack stand with industrial quality design and support bracing system to sustain heavy loads up to 15,000kg. Adjusts to match the job with a 645mm minimum lift height and 1077mm maximum lift height !! Featuring an Ultra Heavy-Duty Industrial design, these tough stands are ideal for construction, farm, truck, bus, earth moving equipment and fleet vehicle maintenance workshop use.
Features
- Manufactured from high-grade steel and built to exacting standards for quality and durability
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy cleanup
- High strength locking pin
- Controlled pin holes for easy height adjustments
- Turned post slide for easy quick adjustments
- Heavy-gauge steel Gusseted uprights prevent distortion or twisting
- Rugged base provides plenty of stability
- Conveniently located carry handle
- Sold individually (not in pairs)
Specifications
- Safe Working Capacity: 15,000kg (individually rated but must be used in pairs for safe usage)
- Maximum Height: 1077mm
- Minimum Height: 645mm
- Adjustable increments: 70mm
- Saddle Width: 140mm
- Base Dimensions: 460 x 460mm
- Carton: 670 x 380 x 380mm (Single unit)
- Weight: 35.4kg (each)
Intended Use
Heavy duty fleet and maintenance workshops where a lifted vehicle or trailer is to be supported before conducting servicing or repair work.
NOTE: Sold individually but recommended to be used in pairs
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use jack stands.
(0 reviews) -
Stands & RampsTQB BRANDS Jack Stand 25,000kg
The BORUM Industrial Ultra Heavy Duty Jack Stand is a reinforced pin style jack stand with industrial quality design and support bracing system to sustain heavy loads up to 25,000kg. Adjusts to match the job with a 680mm minimum lift height and 968mm maximum lift height !! Featuring an Ultra Heavy-Duty Industrial design, these tough stands are ideal for construction, farm, truck, bus, earth moving equipment and fleet vehicle maintenance workshop use.
Features
- Manufactured from high-grade steel and built to exacting standards for quality and durability
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy cleanup
- High strength locking pin
- Controlled pin holes for easy height adjustments
- Turned post slide for easy quick adjustments
- Heavy-gauge steel Gusseted uprights prevent distortion or twisting
- Rugged base provides plenty of stability
- Conveniently located carry handle
- Sold individually (not in pairs)
Specifications
- Safe Working Capacity: 25,000kg (individually rated but must be used in pairs for safe usage)
- Maximum Height: 968mm
- Minimum Height: 680mm
- Adjustable increments: 70mm
- Base Dimensions: 460 x 460mm
- Carton: 670 x 380 x 380mm (Single unit)
- Weight: 38.5kg (each)
Intended Use
Heavy duty fleet and maintenance workshops where a lifted vehicle or trailer is to be supported before conducting servicing or repair work.
NOTE: Sold individually but recommended to be used in pairs
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use jack stands.
(0 reviews) -
Stands & RampsTQB BRANDS Jack Stands 2,000kg
TradeQuip “Made for the Trade” Adjustable Jack Stands are ideally suited to the professional trade workshop. These ratchet type axle stands are designed with a cast iron support post, tough steel plate welded base and deep saddle for positive location under the vehicle. The cast iron post is equipped with angled teeth and a double-lock safety pin to prevent accidental release of load – the more weight applied, the tighter the post is locked.
We often forget that working with cars and other vehicles can be a dangerous job. It’s easy to get complacent about yours and your employees’ safety when you have years of experience, however accidents can happen to anyone. Although garage and bottle jacks can lift heavy loads they are not designed to keep them there, so when the vehicle has been jacked up it’s crucial that it is placed on a jack stand.
TradeQuip jack stands are excellently designed to ensure you maximum safety. They have wide feet providing a strong base and a unique locking pin so there is no risk of them slipping.
(Previous models include product code/s; 2TJS)
Features
- Constructed of high-grade steel and built to exacting standards for quality and durability
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy cleanup
- Quick action adjustable height mechanism
- Double-lock safety pin design for extra safety and security
- Welded steel frame & cast iron support
- Adjustable height
- Reinforced shaft for added strength stability
- Sold in pairs and only recommended to be used in pairs
Specifications
- Safe Working Capacity: 2,000kg (when used as a pair)
- Minimum Height: 285mm
- Maximum Height: 428mm
- Saddle Area: 85 x 26mm
- Base: 206 x 186mm
- Tested to Australian Standard AS2538:2016
- Carton: 230 x 210 x 360mm
- Weight: 7.2kg
Intended Use
Use in pairs for passenger vehicles, where a lifted vehicle is to be supported before conducting servicing or repair work.
NOTE: Sold in pairs and only recommended to be used in pairs
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use jack stands.
(0 reviews) -
Stands & RampsTQB BRANDS Jack Stands 4,000kg
TradeQuip “Made for the Trade” Adjustable Jack Stands are ideally suited to the professional trade workshop. These ratchet type axle stands are designed with a cast iron support post, tough steel plate welded base and deep saddle for positive location under the vehicle. The cast iron post is equipped with angled teeth and a double-lock safety pin to prevent accidental release of load – the more weight applied, the tighter the post is locked.
We often forget that working with cars and other vehicles can be a dangerous job. It’s easy to get complacent about yours and your employees’ safety when you have years of experience, however accidents can happen to anyone. Although garage and bottle jacks can lift heavy loads they are not designed to keep them there, so when the vehicle has been jacked up it’s crucial that it is placed on a jack stand.
TradeQuip jack stands are excellently designed to ensure you maximum safety. They have wide feet providing a strong base and a unique locking pin so there is no risk of them slipping.
(Previous models include product code/s; 4TJS)
Features
- Constructed of high-grade steel and built to exacting standards for quality and durability
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy cleanup
- Quick action adjustable height mechanism
- Double-lock safety pin design for extra safety and security
- Welded steel frame & cast iron support
- Adjustable height
- Reinforced shaft for added strength stability
- Sold in pairs and only recommended to be used in pairs
Specifications
- Safe Working Capacity: 4,000kg(when used as a pair)
- Minimum Height: 395mm
- Maximum Height: 605mm
- Saddle Area: 98 x 30mm
- Base: 287 x 252mm
- Tested to Australian Standard AS2538:2016
- Carton: 300 x 270 x 460mm
- Weight: 14kg
Intended Use
In pairs for passenger vehicle use, where a lifted vehicle is to be supported before conducting servicing or repair work.
NOTE: Sold in pairs and only recommended to be used in pairs
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use jack stands.
(0 reviews) -
Stands & RampsTQB BRANDS Jack Stands 8,000kg
TradeQuip “Made for the Trade” Adjustable Jack Stands are ideally suited to the professional trade workshop. These ratchet type axle stands are designed with a cast iron support post, tough steel plate welded base and deep saddle for positive location under the vehicle. The cast iron post is equipped with angled teeth to prevent accidental release of load – the more weight applied, the tighter the post is locked.
We often forget that working with cars and other vehicles can be a dangerous job. It’s easy to get complacent about yours and your employees’ safety when you have years of experience, however accidents can happen to anyone. Although garage and bottle jacks can lift heavy loads they are not designed to keep them there, so when the vehicle has been jacked up it’s crucial that it is placed on a jack stand.
TradeQuip jack stands are excellently designed to ensure you maximum safety. They have wide feet providing a strong base.
(Previous models include product code/s; 8TJS)
Features
- Constructed of high-grade steel and built to exacting standards for quality and durability
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy cleanup
- Quick action adjustable height mechanism
- Welded steel frame & cast iron support
- Adjustable height
- Reinforced shaft for added strength stability
- Sold in pairs and only recommended to be used in pairs
Specifications
- Safe Working Capacity: 8,000kg(when used as a pair)
- Minimum Height: 468mm
- Maximum Height: 715mm
- Saddle Size: 125×40(mm)
- Base Size: 324 x 294mm
- Tested to Australian Standard AS2538:2016
- Carton: 350 x 320 x 580mm
- Weight: 30kg
Intended Use
In pairs for passenger vehicle use, where a lifted vehicle is to be supported before conducting servicing or repair work.
NOTE: Sold in pairs and only recommended to be used in pairs
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use jack stands.
(0 reviews) -
Parts WashersTQB BRANDS Jet Blast Parts Washer with Heating System
The TradeQuip Jet Blast Parts Washer with Heating System is designed to deliver fast, efficient, and professional cleaning of automotive, industrial, and machinery components. Combining heated water-based cleaning fluid, compressed air, and an integrated cleaning gun, it removes grease, oil, and contaminants with minimal effort while providing a safer alternative to solvent-based cleaning.
Built with a durable steel cabinet, large working area, and adjustable digital temperature control up to 60°C, the Parts Washer improves cleaning performance by using heated cleaning fluid to break down stubborn deposits. The enclosed cabinet design, integrated LED lighting, ventilation fan, and air drying function provide a clean, efficient workspace while helping to reduce mess and improve operator visibility.
Ideal for professional workshops, maintenance facilities, and industrial environments, the Jet Blast Parts Washer is suitable for cleaning engine components, transmissions, gearboxes, bearings, suspension parts, and a wide range of mechanical assemblies.
Features
- Heated water-based cleaning system with adjustable temperature up to 60°C.
- Powerful cleaning gun and compressed air drying function.
- Integrated LED lighting and ventilation fan for improved visibility.
- Large enclosed cleaning cabinet helps contain overspray.
- Digital temperature controller for precise heating control.
- Durable steel construction for long service life.
- Designed for use with non-flammable, water-based cleaning solutions.
Specifications
- Cleaning Fluid Capacity: 8–14 L
- Heating Temperature: Up to 60°C
- Working Pressure: 70–120 PSI
- Overall Dimensions: 820 × 610 × 1335 mm
- Working Area: 737 × 559 × 452 mm
(0 reviews) -
Hand ToolsTQB BRANDS Jumbo Spanner Set 10pce – Imperial
This “Borum Industrial” Jumbo Combination Spanner Set includes 10 popular imperial large-sized combination wrenches from 1 5/16in. to 2in. Made of heat-treated drop forged steel with a chrome vanadium finish. The high-quality, chrome plating looks great and provides a durable, easy-to-clean finish. The ring ends have 15 degrees of offset for knuckle clearance and increased access in tight spaces. Kit includes hard wearing storage roll. The ring end on these super-sized combination wrenches gives you a steady, sturdy grip on nuts and bolts whilst the open end offers an easy option in awkward or confined spaces.
Features:
- High-quality, chrome plating provides a durable, easy-to-clean finish
- Heat Treated C45 Carbon Steel construction
- Exact fit that won’t strip nut or bolt heads
- 15 degree offset ring spanner for greater range
- Supplied in convenient robust storage roll
Specifications:
- 10 Imperial sizes: 1 5/16″, 1 3/8″, 1 7/16″, 1 1/2″, 1 5/8″, 1 11/16″, 1 3/4″, 1 13/16″, 1 7/8″, 2″”
- Wallet rolled out: 830 x 690 x 30mm
- Wallet rolled up: 150 x 690 x 130mm
- Weight: 14kg
(0 reviews) -
Hand ToolsTQB BRANDS Jumbo Spanner Set 10pce – Metric
This “Borum Industrial” Jumbo Combination Spanner Set includes 10 popular metric large-sized combination wrenches from 34mm to 50mm. Made of heat-treated drop forged steel with a chrome vanadium finish. The high-quality, chrome plating looks great and provides a durable, easy-to-clean finish. The ring ends have 15 degrees of offset for knuckle clearance and increased access in tight spaces. Kit includes hard wearing storage roll. The ring end on these super-sized combination wrenches gives you a steady, sturdy grip on nuts and bolts whilst the open end offers an easy option in awkward or confined spaces.
Features:
- High-quality, chrome plating provides a durable, easy-to-clean finish
- Heat Treated C45 Carbon Steel construction
- Exact fit that won’t strip nut or bolt heads
- 15 degree offset ring spanner for greater range
- Supplied in convenient robust storage roll
Specifications:
- 10 Metric sizes: 34mm, 36mm, 38mm, 41mm, 42mm, 44mm, 45mm, 46mm, 48mm, 50mm
- Wallet rolled out: 830 x 690 x 30mm
- Wallet rolled up: 150 x 690 x 130mm
- Weight: 14kg
(0 reviews) -
Trolleys & CreepersTQB BRANDS Low Profile Foldable Creeper 150kg
eQuipt “Designed to Deliver” space-saving foldable creeper features a low-profile design and a robust 150kg load capacity for demanding workshop environments. The oil and solvent-resistant finish is easy to clean and rust-proof, ensuring long-lasting durability in commercial settings. Six smooth-rolling swivel castors provide excellent maneuverability, while the padded headrest ensures operator comfort during use. Its unique foldable construction allows for compact storage, making it an ideal choice for mechanics, car dealerships, and home garages.
Features
- Oil and solvent resistant
- Easy to clean finish
- Won’t rust
- Padded headrest
- Six smooth rolling swivel castors
Specifications
- Safe Working Capacity: 150kg
- Swivel Castors: 6 x 76mm
- Open Dimensions: 1070(L) x 550(W) x 130(H)mm
- Closed Dimensions: 580(L) x 550(W) x 175(H)mm
- Weight: 9kg
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use jack stands.
(0 reviews) -
Workshop Presses & AccessoriesTQB BRANDS Master Press & Pull Set
This versatile TradeQuip Universal Press and Pull Sleeve Kit includes everything you need to remove and install bushes, bearings and seals. Constructed from heat-treated forged high carbon steel, this durable set is perfect for the removal and installation for Bearing bushes ,Silent bearing, Hydraulic bearing and Rubber bearing. This units comes in an individually organised carrying case, making it perfect for both the automotive professional or serious DIY enthusiast. The professional “Made for the Trade” 28pce Press and Pull Sleeve Kit has applications across several industries.
Features- 20 Sleeves Constructed from heat-treated forged carbon steel
- Sturdy Blow Mould Case
Specifications
- 4 x Step Plates: 74, 76, 78, 80mm
- 4 x Pulling Spindles With Thrust Bearings (10mm, 12mm, 14mm & 16mm)
- 20 x Press Sleeves: 44 x 43; 46 x 36; 48 x 38; 50 x 40; 52 x 42; 54 x 44; 56 x 46; 58 x 48; 60 x 50; 62 x 52; 64 x 54; 66 x 56; 68 x 58; 70 x 60; 72 x 62; 74 x 64; 76 x 66; 78 x 68; 80 x 70; 82 x 72mm
Intended Use
This Master PRESS & PULL KIT’s intended use is for the removal and installation of bushes, bearings and seals, races, bearings, sprockets and pulleys on cars, trucks, off-road construction equipment and machinery
(0 reviews) -
Trolleys & CreepersTQB BRANDS Mechanics Creeper
The TradeQuip “Made for the Trade” low profile moulded mechanics creeper comes complete with 6 x 75mm high quality swivel castors for easy manoeuvring. This creeper is equipped with a thick padded cushion headrest for extra comfort and two convenient side moulded tool trays. This trade quality model is moulded from tough high impact polymer, features comfortable ergonomic shoulder recesses and an integrated carrying handle. Glide just 100mm above the ground in this lightweight low-riding mechanics creeper. The durable rubber/nylon offset-centre castors with ball-bearing swivelling wheels roll smoothly across the workshop floor and turn easily for ultimate maneuverability.
Easily clear the undercarriage of most vehicles with this low-profile mechanics creeper. The creeper body is manufactured to “Made for the Trade” quality using a high-impact polymer material that resists impacts, won’t rust and is easy to clean. With a comfortable padded headrest and load capacity of up to 130kg, this low-profile creeper is one of the lightest and most durable available to the Australian Automotive Repair market.
Features- Monoque high impact resistant polymer plastic design
- Oil and solvent resistant
- Easy to clean finish
- Won’t rust
- Padded headrest
- Six smooth-rolling swivel castors
- Built-in tool storage trays
Specifications
- Safe Working Capacity: 130kg
- Swivel Castors: 6 x 75mm
- Dimensions: 1010(L) x 475(W) x 115(H)mm
- Replacement Castors: Code# 1023-1
- Carton: 1030 x 500 x 90mm
- Weight: 6kg
(0 reviews) -
Trolleys & CreepersTQB BRANDS Mechanics Creeper Caddy
This very handy TradeQuip “Made for the Trade” Creeper Caddy keeps nuts, bolts and small tools within reach with its convenient compartments and handy handles. With 2 large and 3 small compartments, organising your next under-car challenge just got easier. The durable ABS impact resistant polymer tray is 50mm tall by 450mm across and 400mm wide and rides on 50mm swivel castors.
Features- Easy to clean finish
- Oil and solvent resistant
- Won’t rust
- 4 smooth-rolling swivel castors
- Impact resistant polymer plastic design
- Built-in parts/tool storage compartments
Specifications
- Safe Working Capacity: 25kg
- Swivel Castors: 4 x 50(D)x16(W)mm
- Tray Depth: 43mm (inner)
- Length: 435mm
- Width: 400mm
- Height: 120mm (castor included)
(0 reviews) -
Blasting EquipmentTQB BRANDS Mobile Blasting Kit 37Litre
The TradeQuip “Made for the Trade” Mobile Abrasive Blasting Kit is perfect for a wide variety of surface preparation jobs such as removing paint, scale, rust and oxidation. Ideal for surface preparation on cars, trucks, machinery, steel, glass etching and much more. Features a 2.4m heavy-duty blast hose designed for long life and maneuverability. Durable wheels and built-in handle allow for easy transport. Simply add abrasive media and hook up to an air supply and you’re ready to blast. Some assembly required.
(Previous models include product code; 3060)
Note: TradeQuip Walnut Shells cannot be used in this mobile blasting unit.
PLEASE NOTE:
Minimum Free Delivery required to operate this unit (using Medium grit and the Small nozzle) is 400 Litres per minute.
Recommended Compressor Air Supply Delivery is 600 Litres per minute.
Features
- Heavy duty welded steel design
- High volume extra large valve
- Designed for high flow with minimal air input
- Blast gun fitted with safety trigger
- Heavy-wall blast hose
- Safety pressure-relief valve
- Durable wheels
- Safety hood, thread tape and abrasive refill funnel
- Onboard pressure regulator
- 4x ceramic nozzle tips 2.0 2.5 3.0 3.5mm
- Easy to fill screw tank cap
Replacement parts available
- 3008-1: Ceramic Tip Set to suit Old Style Ball Valve Type Handpiece 2.4 2.6 3.2 3.6mm
- 3008-2: Sand blasting gun
- 3008-3: Replacement Ceramic Tip Set 2.0 2.5 3.0 3.5mm
- 3008-4: Rubber Pad for 3008/2
- 3008-25: Replacement Hose
Specifications
- Capacity: 37 Litre
- Working Pressure: 60-125psi
- Air Delivery: 400-600 Litres per Minute @ 125psi (dependent on nozzle size)
- Abrasive Use: 27-90kg @ 125psi per hour (dependant on nozzle size)
- Hose Length: 2400mm
- Hose OD: 24mm
- Hose ID: 12mm
- Tank Dimensions: 508(H) x 305(Ø)
- Nett Weight: 19kg
- Carton: 770 x 420 x 370mm
- Weight: 21kg
Intended Use
Blasting work utilising compressed air with recommended abrasive media and/or glass beads to clean and abrade a surface, typically metal, of any rust, paint or other unwanted surface materials.
(0 reviews) -
Work Benches & StorageTQB BRANDS Mobile Tear Down Bench
The TradeQuip “Made for the Trade” Mobile Tear-Down Bench combines the strength of heavy-duty enamelled steel with the convenient mobility of four 360° lockable swivel castors. Ideal for automatic transmission and engine parts repair, this unit has a top that angles slightly to a fluid drain feature. Fluids are safely contained in a removable plastic bin (8 Litre capacity) or the unit may be connected to a centralised drain system. With ergonomic adjustable leg height this work bench is easy setup for safe comfortable operation in any part of the workshop with heavy duty 100mm castors (2 rigid & 2 lockable swivel).
This workbench is great as a middle-of-the-workshop assembly table, extra worktop, or even a primary workbench for smaller workshops . When in the desired position, engage the swivel wheel castor brakes to avoid any unwanted movement. The rugged, all-purpose design goes where you need it to… and stays there to get the job done…
Fitted with adjustable work height, this workbench offers comfort and less back strain resulting in more productivity. The 14 gauge 1200 x 640mm table top has a 13mm rim that will contain all liquids. This work bench is fitted with a lockable drawer for security, alongside a removable (polyethylene) drain pan for convenience.
Versatile and undeniably strong, TradeQuip “Made for the Trade” workbenches are developed with sophisticated designs to endure demanding industry and heavy duty commercial applications.
Features
- Ideal for Engine and Transmission Rebuilds
- Heavy Duty Rolled Edge Steel Construction
- Convenient Removable Drain Bowl
- 13mm Bench top Rim to contain Leaking Fluids
- Quality Castors (2 swivel with brake)
- Key Lockable Steel Drawer with Ball Bearing Slides
- High Gloss Enamel Paint Finish
Specifications
- Load Capacity: 250kg
- Bench Top Capacity: 150kg
- Bench Top: 1200(L) x 640(W)mm (with 13mm rim)
- Shelf Capacity: 100kg
- Shelf: 1110(L) x 460(W)mm
- Drain Bowl Capacity: 8 Litres
- Castor Wheels: 100(D) x 25(W)mm
- Dimensions: 1200(L) x 640(W) x 875(H)mm
- Nett Weight: 56.5kg
- Carton: 1250(L) x 740(W) x 240(H)mm
- Gross Weight: 62kg
(0 reviews) -
Work Benches & StorageTQB BRANDS Mobile Workbench
The TradeQuip “Made for the Trade” Mobile Workbench combines the strength of heavy-duty enamelled steel with the convenient mobility of two 360° lockable swivel castors. Designed for easy maneuverability on uneven surfaces, each castor locks fully in place to hold the workbench steady for projects requiring precision. It’s even stylish enough to roll up next to the BBQ for backyard get-togethers. Easy to move in any direction this workbench is great as a middle-of-the-workshop assembly table, extra worktop, or even a primary workbench for smaller workshops. When in the desired position, engage the two swivel wheel castor brakes to avoid any unwanted movement. The rugged, all-purpose design goes where you need it to… and stays there to get the job done…
Versatile and undeniably strong, TradeQuip workbenches are developed with sophisticated designs to endure demanding industry and heavy duty commercial applications.
Features
- Sturdy steel construction workbench
- Bottom shelf that allows unobstructed access
- High gloss enamel finish
- Quality castors – two fixed and two locking swivel
- Heavy-duty handle
Specifications
- Load Capacity: 300kg
- Bench Top Thickness: 3mm
- Work Surface: 1100 x 700mm
- Dimensions: 1100(L) x 700(W) x 830(H) mm
- Nett Weight: 60kg
- Carton: 1140 x 740 x 110mm
- Gross Weight: 63kg
(0 reviews) -
Work Benches & StorageTQB BRANDS Mobile Workshop Table
The Heavy Duty steel construction makes this TradeQuip “Made for the Trade” Mobile Workshop Table durable enough for moving tools and car parts to and from the vehicle. Easily handles loads up to 45kg. Solid composite rubber castors ensure you can manoeuvre this mobile workshop table around the workshop without marring the floor. The height adjustment gives you plenty of options for lowered cars or SUV’s. This very versatile mobile work top makes any installation or service work flow more efficiently for auto repairers and installation workshops.
Features
- Strong tubular steel construction
- Handy tool storage holders
- Protective Bumper for top tray
- Smooth rolling composite rubber castors
- Height adjustable to most vehicles
- Sturdy main support post
Specifications
- Safe Working Capacity: 45kg
- Adjustable Working Height: 930-1270mm
- Castor Wheel Diameter: 75mm
- Table Top Dimensions: 809L x 475W x 42Hmm
- Main Tray Dimensions: 580L x 308W x 38Hmm
- Overall Dimensions: 870L x 755W x 930Hmm
- Nett Weight: 19.5kg
(0 reviews) -
Work Benches & StorageTQB BRANDS Mobile Workshop Table – 1 Drawer
Featuring a convenient drawer, the Heavy Duty steel construction makes this TradeQuip “Made for the Trade” Mobile Workshop Table durable enough for moving tools and car parts to and from the vehicle. Easily handles loads up to 80kg. Ball bearing castors ensure you can manoeuvre this mobile workshop table around the workshop. Including 3 compartments and 6 mounting holes, the height adjustment gives you plenty of options for lowered cars or SUV’s. This very versatile mobile work top makes any installation or service work flow more efficiently for auto repairers and installation workshops
Features
- Height adjustable to most vehicles
- Ball Bearing wheels for easy moveablilty
- Multi-functional top table with 3 compartments and 6 screwdriver holes
- Top EVA mat for skid resistance
- Extra drawer for more storage room
Specifications
- 340 x 300 x 45mm Drawer
- Adjustable from 860-1200mm
- Includes Drawer and Top Tray Liner
- 80kg Distributed Load Capacity
- 730 x 500 x 25mm
- Gross Weight: 20kg
(0 reviews) -
Motorcycle LiftersTQB BRANDS Motorcycle Lifter 360kg
This TradeQuip Hydraulic Motorcycle Lifter has a safe working capacity of up to 360kg. Our design features include a full steel ramp, scissor lift technology and convenient mobility with 2 swivel and 2 fixed castors. The base frame is made of quality steel tube and the platform is manufactured of checker plate. Front wheel clamping jaws are step-less (up to 135mm) with stability assured via the crank handle. A quality hydraulic foot pump easily raises and lowers the ATV/Bike load… whilst the automatic safety lock delivers piece of mind safety and security. “Made for the Trade” quality swivel castors provide smooth, stable and convenient mobility. This TradeQuip Hydraulic Motorcycle Lifter comes complete, with an ‘extra-large’ (removable) loading ramp which is also caters for most motorcycles with kickstands. The 2102T Motorcycle Lifters robust and versatile construction, includes a front wheel vice and 4 hook mounts to safely secure any load up to 360kg.
Features- Designed to deliver a safe working lifting device for use with motorcycles, ATV’s, ride-ons, personal watercraft, and snowmobiles
- Two adaptor bars provide additional clearance for high chassis motocross bikes
- Automatic load locking bar for safety
- Quality swivel castors, for easier to positioning and moving around the workshop
- High gloss enamel paint finish
- Does not include tie down straps
Specifications- Safe Working Capacity: 360kg
- Minimum Height: 205mm
- Maximum Height: 780mm
- Platform Length: 1345mm
- Platform Width: 490mm
- Castors:
- Nett Weight: 95kg
- Crate: 1500 x 680 x 310mm
- Gross Weight: 115kg
Intended Use
Lifts motorcycles, ATV’s, ride-on mowers and snowmobiles for servicing, repair work and new vehicle preparation.
(0 reviews)