TQB
Showing 37–72 of 221 results
-
Transmission LiftersTQB BRANDS Clutch Jack – 130kg
The Borum Industrial 130kg Hydraulic Clutch Jack is perfect for earthmoving equipment and truck clutch and/or flywheel installation and removal. It features two fully adjustable splines, smooth, manually operated hydraulic lifting and lowering and four 360° swivel caster wheels for better load positioning. The ergonomic multi position rotating jacking handle makes overall maneuverability simple and efficient in a busy workshop.
Features
- Designed for lifting, lowering & installing/removing heavy vehicle clutch/flywheel assembles
- Frame is constructed of industrial-grade steel and built to exacting standards for quality and durability
- High quality hydraulic steel jacking cylinder results in low physical effort oil needed to lift load
- Industrial strength hydraulic system is protected from overload damage
- Filled with industrial grade 32 hydraulic fluid
- Rugged heavy industrial wheels and full swivel ball bearing castors
- User-friendly rotating pumping handle for maximum multi-directional operation
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy cleanup
- Two 10-tooth alignment splines included which conveniently stores on chassis
Specifications
- Safe Working Capacity: 130kg
- Minimum Height: 288mm
- Maximum Height: 980mm
- Chassis Dimensions: 1041 x 609mm
- 1 x 2″ Alignment Spline Included (10 Tooth)
- 1 x 1-3/4″ Alignment Spline Included (10 Tooth)
- Carton: 1070 x 710 x 220mm
- Gross Weight: 62kg
Intended Use
This clutch jack is designed to remove, install & transport (in the lowered position) 14″ and 15-1/2″ single and double disk clutches and/or flywheel assemblies on & off vehicles
(0 reviews) -
Wheel, Dollies & SuspensionTQB BRANDS Combi Portable Bead Breaker 5000kg
This Borum Industrial Hydraulic Bead Breaker delivers 5,000kg of force in seconds and is designed to work on most truck and tractor rims up to 26″. Ideal for use with all trucks, tractors, graders, harvester and skidder tyres, it suits all types of rims except 5-piece earthmover rims. It is expressly intended to be used as an aid in breaking the bead seal between a tyre and it’s one, two or three piece wheel rim for the purpose of reseating a bead seal, replacement of tyre or wheel and replacing tyre valves, tyre tubes etc. This Borum Industrial Hydraulic Bead Breaker can perform tyre work or tyre replacements without ever removing the wheel from the vehicle. This quality unit is excellent for field maintenance use on agricultural machines.
The bead breaker works directly on the bead of the tyre and will not damage the tyre if used correctly when used with the optional TradeQuip 2054T 10,000 psi air/hydraulic pump and the Eagle Pro EH-8206F Hydraulic Hose With Coupler.
Features
- Economical solution for agricultural wheels and 1, 2 and 3piece truck tyre rims
- Hydraulically clamps on wheel
- Durable steel construction
- Clamps to wheel rim & breaks bead simply with up to 5,000kg of force
- Requires 10,000psi air/hydraulic pump (sold separately)
- Most popular tool for breaking beads on most agricultural tyres
Specifications
- Safe Working Capacity: 5,000kg
- Rated Pressure: 10,000psi
- Maximum Rim Diameter: 660mm (26″)
- Maximum Rim Width: 125mm (5″)
- Ram Stroke: 90mm
- Pressure Connection: 3/8″ – 18NPTF
- Hydraulic Oil Capacity: 250ml
- Dimensions: 429x140x324mm
- Weight: 16kg
- Carton: 375x375x155mm
Intended Use
Designed to be used as an aid in breaking the bead seal between a tyre and it’s one, two or three piece wheel rim for the purpose of reseating a bead seal, replacement of tyre or wheel and replacing tyre valves, tyre tubes etc.
(0 reviews) -
Vices & AnvilsTQB BRANDS Commercial Bench Vice Swivel with Anvil 150mm
Borum Industrial Bench Vices are made with a high quality ductile cast iron body built for rugged use and extended life. Each has the capability of handling pipe as well as mounting to the bench with 3 mounting posts providing more stability and secure hold. Constructed of ductile iron, the Borum Industrial Bench Vice with anvil has a precision cast body with a swivel base, the vice can be rotated 360° to offer flexibility. Whether used for cutting, screwing, drilling, planing, sanding, or just holding, this Borum Industrial Bench Vice is perfect for any type of industrial holding application. The Borum 150mm Industrial Bench Vice is a precision-manufactured, hefty brute with robust design features that make it more user friendly and efficient in an industrial workshop environment. Both the high quality ductile cast iron steel and durability-inducing drop forging process ensures that the Borum 150mm Industrial Bench Vice will continue to perform like new for a many years.
(Previous models include product code/s; 7416S)
Features
- High quality ductile cast iron body built for rugged use and extended life
- Replaceable serrated top jaws
- 360° swivel base with double lockdown for quick and easy positioning
- Designed for general duty applications
- Built in pipe jaws handle various pipe sizes
- Large anvil work surface
- Lead-free paint finish ensures long-lasting wear and helps prevent rust.
- Oil, grease and dirt-resistant finish for easy cleanup.
Specifications
- Jaw Width: 150mm
- Jaw Opening: 150mm
- Throat Depth: 105mm
- Anvil Size: 90x105mm
- Mounting Base: 4Holes – 15mm dia – 160mm apart
- Net Weight: 25kg
(0 reviews) -
Vices & AnvilsTQB BRANDS Commercial Bench Vice Swivel with Anvil 200mm
Borum Industrial Bench Vices are made with a high quality ductile cast iron body built for rugged use and extended life. Each has the capability of handling pipe as well as mounting to the bench with 3 mounting posts providing more stability and secure hold. Constructed of ductile iron, the Borum Industrial Bench Vice with anvil has a precision cast body with a swivel base, the vice can be rotated 360° to offer flexibility. Whether used for cutting, screwing, drilling, planing, sanding, or just holding, this Borum Industrial Bench Vice is perfect for any type of industrial holding application. The Borum Industrial 200mm Bench Vice is a precision-manufactured, hefty brute with robust design features that make it more user friendly and efficient in an industrial workshop environment. Both the high quality ductile cast iron steel and durability-inducing drop forging process ensures that the Borum Industrial 200mm Bench Vice will continue to perform like new for a many years. (Previous models include product code/s; 7418S)
Features
- High quality ductile cast iron body built for rugged use and extended life
- Replaceable serrated top jaws
- 360° swivel base with double lockdown for quick and easy positioning
- Designed for general duty applications
- Built in pipe jaws handle various pipe sizes
- Large anvil work surface
- Lead-free paint finish ensures long-lasting wear and helps prevent rust
- Oil, grease and dirt-resistant finish for easy cleanup
Specifications
- Jaw Width: 200mm
- Jaw Opening: 200mm
- Throat Depth: 115mm
- Anvil Size: 100x113mm
- Mounting Base: 4Holes – 15mm dia – 160mm apart
- Net Weight: 30kg
(0 reviews) -
Workshop Presses & AccessoriesTQB BRANDS Electric Hydraulic Press 30,000kg
This TQ Pro “Latest Technologies” 30,000kg Electric Hydraulic Workshop Press is capable of bending, pressing or extruding and makes light work of installing ball joints, U-joints and pulleys – making it ideal for many automotive and industrial applications. Polished inner cylinder walls extend the life of the hydraulic seals to minimise abrasion and wear, while the cylinder ram and pistons are also polished and chromed, guided by high performance seals, wear rings and dust seals. Includes a dial gauge for dual metric/tons pressure readings. The strong frames and powerful high-pressure hydraulics will provide years of dependable service in many applications. When components need to be removed or assembled, TQ Pro “Latest Technologies” electric hydraulic presses deliver the controlled power to safely remove and install bearings, gears, U-joints, bushings, ball joints and pulleys with precision and versatility! This 30,000kg Electric Hydraulic Workshop Press features a dual stage pump where the first stage pump quickly extends the ram to the load point & then the second stage engages and provides higher pressure to perform pressing operations. The ram cylinder glides across the width of the upper frame allowing off-centre pressing.
Includes a set of mandrill pressing attachments mounted onto the frame as well as a polycarbonate safety guard providing added security for the user.
Features:
- Premium-grade steel built to exacting standards for quality and durability
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy clean up
- High quality large diameter steel hydraulic cylinder unit results in lower oil pressure needed to develop pressing force, helping to reduce wear and extend service life of the ram and pump
- Hydraulics are powered with a high quality oil, which offers better corrosion resistance and high/low temperature flexibility
- Foot Operated electric trigger for extending & retracting the main ram
- Key operated power switch ensures user safety by providing full lock out of the pump functions while not in service
- Easy to access raise & lower buttons on press frame with large emergency stop button
- Flexible LED inspection light illuminates the working area
- Integrated bed winch with swivel handle
- 2-way lockable V-Blocks ensure they remain secured on the press
- Integrated overload protection valve keeps from overloading the system
- Handy removable parts tray
- Includes a set of mandrill pressing attachments
- Polycarbonate safety guard included
Specifications:
- Safe Working Capacity: 30,000kg
- Working Range: 25-850mm
- Overall Height: 1800mm
- Overall Width: 1080mm
- Overall Depth: 505mm
- Ram Diameter: 60mm
- Frame Inside: 148mm
- Frame Thickness: 8mm
- Bed Thickness: 10mm
- Bed Inside: 165mm
- Bed Width: 600mm
- Ram Sideways Movement: 200mm
- Piston Ram Stroke: 145mm
- Screw Adjustment: 75mm
- Bed Height Settings: 6
- Lower Parts Tray: 225)L) x 135(W) x 55(D)mm
- Included Press Pins & Mount: 2T, 3T, 6T, 8T, 10T, 12T, 13T, 15T
- Power Unit: 240V, 10A Plug
- Minimum Height Clearance Required With Bed At Max Height & Safety Guard Opened Fully: 2230mm
- Nett Weight: 174kg
- Crate: 1690 x 910 x 340mm
- Gross Weight: 205kg
Included Safety Guard Specifications:
- Overall Dimensions Installed: 480L x 620H x 150Dmm
- Working Area (Guard Screen Raised): 400W x 535Hmm
- Protection Area (Guard Screen Lowered): 540W x 540Hmm
- Polycarbonate Guard Screen Thickness: 3mm
Foot Pedal Module Specifications:
- Overall Dimensions: 170 x 130 x 160mm
- Clearance Between Foot Pedals & Pedal Guard: 125mm
(0 reviews) -
Workshop Presses & AccessoriesTQB BRANDS Electric Hydraulic Press 50,000kg
This TQ Pro “Latest Technologies” 50,000kg Electric Hydraulic Workshop Press is capable of bending, pressing or extruding and makes light work of installing ball joints, U-joints and pulleys – making it ideal for many automotive and industrial applications. Polished inner cylinder walls extend the life of the hydraulic seals to minimise abrasion and wear, while the cylinder ram and pistons are also polished and chromed, guided by high performance seals, wear rings and dust seals. Includes a dial gauge for dual metric/tons pressure readings. The strong frames and powerful high-pressure hydraulics will provide years of dependable service in many applications. When components need to be removed or assembled, TQ Pro “Latest Technologies” electric hydraulic presses deliver the controlled power to safely remove and install bearings, gears, U-joints, bushings, ball joints and pulleys with precision and versatility! This 50,000kg Electric Hydraulic Workshop Press features a dual stage pump where the first stage pump quickly extends the ram to the load point & then the second stage engages and provides higher pressure to perform pressing operations. The ram cylinder glides across the width of the upper frame allowing off-centre pressing.
Includes a set of mandrill pressing attachments mounted onto the frame as well as a polycarbonate safety guard providing added security for the user..
Features:
- Premium-grade steel built to exacting standards for quality and durability
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy clean up
- High quality large diameter steel hydraulic cylinder unit results in lower oil pressure needed to develop pressing force, helping to reduce wear and extend service life of the ram and pump
- Hydraulics are powered with a high quality oil, which offers better corrosion resistance and high/low temperature flexibility
- Foot Operated electric trigger for extending & retracting the main ram
- Key operated power switch ensures user safety by providing full lock out of the pump functions while not in service
- Easy to access raise & lower buttons on press frame with large emergency stop button
- Flexible LED inspection light illuminates the working area
- Integrated bed winch with swivel handle
- 2-way lockable V-Blocks ensure they remain secured on the press
- Integrated overload protection valve keeps from overloading the system
- Handy removable parts tray
- Includes a set of mandrill pressing attachments
- Polycarbonate safety guard included
Specifications:
- Safe Working Capacity: 50,000kg
- Working Range: 80-780mm
- Overall Height: 1900mm
- Overall Width: 1240mm
- Overall Depth: 540mm
- Ram Diameter: 70mm
- Frame Inside: 200mm
- Frame Thickness: 10mm
- Bed Thickness: 12mm
- Bed Inside: 220mm
- Bed Width: 750mm
- Bed Gap (Workable Pressing Area): 480 x 220mm
- Ram Sideways Movement: 280mm
- Piston Ram Stroke: 145mm
- Screw Adjustment: 75mm
- Bed Height Settings: 6
- Lower Parts Tray: 225)L) x 135(W) x 55(D)mm
- Included Press Pins & Mount: 2T, 3T, 6T, 8T, 10T, 12T, 13T, 15T
- Power Unit: 240V, 10A Plug
- Minimum Height Clearance Required With Bed At Max Height & Safety Guard Opened Fully: 2220mm
- Nett Weight: 255kg
- Crate: 1860 x 1000 x 410mm
- Gross Weight: 290kg
Included Safety Guard Specifications:
- Overall Dimensions Installed: 620 x 620 x 150mm
- Working Area (Guard Screen Raised): 540 x 435mm
- Protection Area (Guard Screen Lowered): 540 x 540mm
- Polycarbonate Guard Screen Thickness: 3mm
Foot Pedal Module Specifications:
- Overall Dimensions: 170 x 130 x 160mm
- Clearance Between Foot Pedals & Pedal Guard: 125mm
(0 reviews) -
Cranes & Lifting DevicesTQB BRANDS Engine Crane 3000kg
This Heavy Duty TradeQuip “Made for the Trade” Engine Crane has a long stroke lifting ram, a single action pump with a maximum load capacity of 3,000kg. Very simple to use manual hydraulic operation. The jib extends to the desired lifting capacity of 1000kg, 2000kg or 3000kg secured by a single locking pin. Mounted on heavy duty castor wheels for excellent manoeuvrability around the workshop. The lifting range is 0-2500mm so any large engine can be lifted clear out of the engine bay with little effort. With great stability of its wide legs, this crane can also be used to lift machines or other heavy items, making for an excellent piece of equipment for the workshop or warehouse.
Features- Industrial grade engine crane
- Heavy duty hydraulic pump
- Adjustable boom in four positions for lifting
- Robust steel fabricated legs with structural supports
- Large castor wheels for easy mobility
Specifications
- Safe Working Capacity: 3,000kg
- Folded Height: 1540mm
- Maximum Lifting Height @ 3000kg: 1745mm
- Maximum Lifting Height @ 1000kg: 2088mm
- Jib Length Fully Retracted @ 3000kg: 1100mm
- Jib Length Fully Extended @ 1000kg: 1730mm
- Overall Length Fully Extended: 2385mm
- Overall Length Fully Retracted: 1480mm
- Overall Width Fully Extended: 875mm
- Overall Width Fully Retracted: 785mm
- Distance Between Ram & Chain at 3T (Max hydraulic lift): 470mm
- Distance Between Ram & Chain at 2T (Max hydraulic lift): 650mm
- Distance Between Ram & Chain at 1.5T (Max hydraulic lift): 830mm
- Distance Between Ram & Chain at 1T (Max hydraulic lift): 1020mm
- Leg Height 190mm
- Nett Weight: 121.5kg
- Carton 1 of 3 : 1330 x 860 x 100mm (Weight: 29kg)
- Carton 2 of 3 : 1470 x 300 x 200mm (Weight: 82kg)
- Carton 3 of 3 : 700 x 180 x 150mm (Weight: 15kg)
Intended Use
For regular professional use, to raise and/or lower diesel engines and transmissions during service or repair work.
(0 reviews) -
Cranes & Lifting DevicesTQB BRANDS Engine Crane Foldable 1200kg
This Australian Standards AS1418.5 approved TradeQuip “Made for the Trade” hydraulic engine crane has a 8 tonne long stroke lifting ram and double acting pump with a maximum load capacity of 1,200kg. Very simple to use the ‘Quick-lift’ double acting hydraulic pump is equipped with automatic safety valve to control the lowering speed under load. This double action ‘Quicklift’ design… works by lifting the load on the UP and DOWN stroke of the ram handle.The jib extends to the desired lifting capacity of 250kg, 500kg, 750kg or 1200kg secured by a single locking pin. Mounted on 6 swivel castor wheels this engine crane has excellent manoeuvrability around the workshop. The lifting range is 0-2300mm so an engine can be lifted clear out of the engine bay with little effort. With great stability of its wide legs, this crane can also be used to lift machines or other heavy items, making for an excellent piece of equipment for the workshop or warehouse. It is also designed to quickly folds up when not in use to save space in the workshop.(Previous models include product code/s; 1000, 1000T, 1001)
Features- Ideal for automotive, light engineering and general workshops
- Adjustable boom in four positions for lifting
- Outrigger legs easily fold up for transport or storage
- Six swivel castor wheels allow easy mobility
- Double action 8,000kg long stroke hydraulic lifting ram
- Overload Protection
- Constructed of high-grade steel and built to exacting standards for quality and durability
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy cleanup
- Short lifting chain & hook with safety latch
- Easily exceeds Australian Standards AS1418.5 requirements
Specifications
- Safe Working Capacity: 1,200kg (AS1418.5 approved)
- Adjustable Boom: 250kg, 500kg, 750kg & 1200kg
- Lifting Ram Capacity: 8,000kg > Available as Spare Part: Product Code: 2008
- Stabiliser Arms Clearance: 195mm
- Dimensions: (Arms Ext): 2300(H) x 960(W) x 550(D)mm
- See pic for boom length, height and capacity
- Nett Weight: 85kg
- Carton 1 of 2 : 1440 x 300 x 160mm (Weight: 59kg)
- Carton 2 of 2 : 850 x 580 x 90mm (Weight: 32kg)
Intended Use
For regular professional use, to raise and/or lower passenger car engines and transmissions during service or repair work.
(0 reviews) - Ideal for automotive, light engineering and general workshops
-
Cranes & Lifting DevicesTQB BRANDS Engine Crane Load Leveller 680kg
The perfect accessory for our engine cranes, this TradeQuip “Made for the Trade” Engine Leveller reduces the hazards and hassles out of balancing heavy, awkward loads and helps protect engines, transmissions and vehicle damage. Perfect for removing and installing engines, it easily adjusts the angle of the engine simply by turning the swivel handle and is compatible with most good brands of engine cranes.The load leveller includes four 300mm chains with support brackets for increased load security and safety.
Features
- Easy to use, just crank to level
- Tilts forward and backward for easy motor mount alignment
- Heavy duty steel I-beam construction
- Balances engine/transmission for easier installation or removal
- Constructed of high-grade steel and built to exacting standards for quality and durability
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy cleanup
- Easily adapts to different engine cranes and improves the install/removal operation
- 4-point mounting system provides maximum control
- Worm drive shaft rotates with a built-in swivel handle for easy balancing
- 3 adjustable chain assembly holes for different engine sizes
Specifications
- Safe Working Capacity: 680kg
- Chain Length: 300mm
- Chain Anchor Positions: 3
- Engine Mount Positions: 4
- Working Range: 250mm, 275mm, 310mm
- Weight: 6kg
- Carton: 465 x 190 x 60mm
Intended Use
For regular professional use, to tilt engines and/or transmissions whilst raising and/or lowering passenger car engines and transmissions with an engine crane or hoist.
(0 reviews) -
Cranes & Lifting DevicesTQB BRANDS Engine Crane Ram 8000kg
This twin piston TradeQuip “Made for the Trade” 8,000kg Long Hydraulic Ram is the replacement hydraulic ram for use on TradeQuip 1001T hydraulic engine cranes. Mounts directly onto the engine crane and features a slow release function while providing a long 630–1135mm lift range. High quality large diameter twin cylinder hydraulic pump unit results in Quick Lift action, lower oil pressure needed to raise the load, which reduces wear and extends service life. 100% factory vertical load tested for reliability and safety. For vertical use only.
Replacement long hydraulic ram to suit TradeQuip 1001T Engine Crane.
Features
- Double action “Quick Lift” design for quick positioning without load
- Built in ‘Overload Protection’
- Constructed of high grade steel to exacting specifications for strength and durability
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to prevent rust
- Paint is oil, grease and dirt resistant
- Factory filled with high quality hydraulic jack oil, which offers better corrosion resistance and high/low temperature flexibility
- Includes lift handle for easy operation
Specifications
- Safe Working Capacity: 8,000kg
- Minimum Length: 630mm
- Maximum Length: 1135mm
- Ram Pin Hole: 16mm dia. 35mm Outside Ram
- Ram Diameter: 80mm
- Clevis Base Pin Hole: 16mm dia
- Clevis Base: 25mm Inside – 45mm Outside
- Base Width: 129mm
- Nett Weight: 10.5kg
- Carton: 700 x 170 x 150mm
- Gross Weight: 11.5kg
Intended Use
As a direct replacement for the hydraulic unit on a 1001T TradeQuip 1200kg Engine Crane only
(0 reviews) -
Engine Stands & SupportsTQB BRANDS Engine Stand 450kg
eQuipt “Designed to Deliver” 450kg Engine Stand has a 4-leg design featuring a rugged frame with a 4-hole mounting head that rotates 360°, making the unit ideal for 4 cylinder engines. When you’ve got an engine repair job that can’t be completed while the engine block is in the vehicle, this engine stand provides a sturdy support structure to secure the removed engine in mid-air, so you can access any part of it. Use an engine crane to remove the engine from the vehicle, then mount it to the faceplate on this engine stand. (Previous models include product code/s; 1006, RLES450, TQES450)
Features
- Rugged tubular steel frame with attractive durable finish
- 360 degree rotating head that locks in 8 positions
- Slotted mounting head for full adjustment
- Extra wide base for stability and safety
- Easy knockdown and quick assembly design for storing and transporting
- Large diameter wheels and castors for smooth manoeuvring
- Suitable for cast iron/alloy block engines up to 4 cylinder engines
Specifications
- Safe Working Capacity: 450kg
- Centre Height: 780mm
- Width @fixed wheels: 750mm
- Width @swivel castors: 400mm
- Dimensions: 760(L) x 750(W) x 860(H) mm
- Weight: 21kg
- Carton: 910 x 210 x 180mm
Intended Use
For safe handling and positioning of passenger car engines up to 4 cylinder during dismantling and re-assembly.
(0 reviews) -
Engine Stands & SupportsTQB BRANDS Engine Stand 680kg
This TradeQuip “Made for the Trade” 680kg Engine Stand delivers extra strength and accessibility, making it essential for busy garages. Easily adapts to accommodate a variety of engine sizes. “U” shaped base for added stability and support. Adjustable mounting brackets for attachment to engine block. 360° rotating mount head with multi-locking positions. 4 Heavy Duty steel swivel castors for easy manueverability. Legs can be removed for quick, convenient and easy storage. (Previous models include product code/s; 1191)
Features
- Constructed of high-grade steel and built to “Made for the Trade” standards for quality and durability
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and prevent rust
- Paint is oil, grease and dirt-resistant for easy cleanup
- 360° swivelling and locking head allows easy rotation for obtaining the perfect angle position
- Long handle with rubber grips allows easy engine rotation
- Heavy-gauge tubular construction with industrial-grade steel bearing castors for easy maneuverability
- Mounting head has four adjustable arms with bolt holes to accommodate various load sizes
- Removable legs for convenient storage
Specifications
- Safe Working Capacity: 680kg
- Operating Height: 895mm
- Width: 800mm
- Length: 870mm
- Distance between legs: 670mm
- Lower steel tubing: 70x70mm
- Column tubing: 60x60mm
- Column base tubing: 70x76mm
- Leg tubing: 60x60mm
- Mounting head plate: 248x149mm
- Mounting head plate (with fingers): 360x245mm
- Nett Weight: 39kg
- Carton: 870 x 240 x 210mm
- Gross Weight: 41kg
Intended Use
For safe handling and positioning of most 4 and 6 cylinder passenger car engines during dismantling and re-assembly. WARNING: Engine dimensions must be within legs of Engine Stand.
(0 reviews) -
Engine Stands & SupportsTQB BRANDS Engine Stand Foldable 900kg
This TradeQuip “Made for the Trade” 900kg Engine Stand delivers extra strength and accessibility, making it essential for busy garages. Easily adapts to accommodate a variety of engine sizes. “H” shaped base for added stability and support. Adjustable mounting brackets for attachment to engine block. 360° rotating mount head with multi-locking positions. 5 steel swivel castors for easy maneuverability. Legs fold up for quick, convenient and easy storage. (Previous models include product code/s; 1192)
Features
- Constructed of high-grade steel and built to “Made for the Trade” standards for quality and durability
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and prevent rust
- Paint is oil, grease and dirt-resistant for easy cleanup
- 360° swivelling and locking head allows easy rotation for obtaining the perfect angle position
- Long handle with rubber grips allows easy engine rotation
- Heavy-gauge tubular construction with industrial-grade steel bearing castors for easy maneuverability
- Mounting head has four adjustable arms with bolt holes to accommodate various load sizes
- Foldable legs for convenient storage
Specifications
- Safe Working Capacity: 900kg
- Operating Height (A) : 800mm Floor to mounting plate centre
- Width(B) : 530mm
- Length (C): 1110mm
- ID between legs (D): 780mm
- OD between legs (E): 930mm
- Lower steel tubing: 60x60mm
- Column tubing: 70x70mm
- Nett Weight: 45kg
- Carton: 910 x 210 x 180mm
- Gross Weight: 43kg
Intended Use
For safe handling and positioning of most 6 and 8 cylinder passenger car engines during dismantling and re-assembly. WARNING: Engine dimensions must be within legs of Engine Stand.
(0 reviews) -
Engine Stands & SupportsTQB BRANDS Engine Support Bar 500kg
Constructed of heavy-duty powder coated steel for durability, the TradeQuip “Made for the Trade” Engine Support Bars are a must when working on under the bonnet repairs such as removing the transmission or transaxle. This 1019T Engine Support Bar comes with adjustable extension arms, neoprene support pads and adjustable height screw. Designed to support and accurately position engines during maintenance operations such as replacing engine/transmission mountings and certain body panels, the rubber padded support legs prevents slippage as well as protecting the paint.
Features- Adjustable to fit across most car bonnets
- Supports engine or transmission in place during repairs
- Rubber cushioned support legs prevent damage to paint
- Powder coat finish
- Adjustment screw for load levelling
- Supplied with a short length of chain
Specifications
- Safe Working Capacity: 500kg
- Minimum Extension: 1020mm
- Maximum Extension: 1600mm
- Carton: 1030 x 200 x 80mm
- Gross Weight: 18kg
Intended Use
Safely supports an engine in place during repairs such as replacing engine mounts or removing the transmission or transaxle without removing the engine.
(0 reviews) -
Engine Stands & SupportsTQB BRANDS Engine Support Bar 500kg
Constructed of high gloss enamel coated steel for durability, this TradeQuip 500kg capacity Engine Support Bar features dual hook assemblies for increased load balance when working on heavy engines or when removing the transmission or transaxle. This 1020T Engine Support Bar comes with adjustable extension arms, neoprene support pads and adjustable height screw. Designed to support and accurately position engines during maintenance operations such as replacing engine/transmission mountings and certain body panels, the rubber padded support legs prevents slippage as well as damage to paint.
Features- Dual hook assemblies for balanced support
- Adjustable to fit across most car bonnets
- Supports engine or transmission in place during repairs
- Rubber cushioned support legs prevent damage to paint
- High gloss enamel finish
- Adjustment screw for load levelling
- Supplied with a short length of chain
Specifications
- Safe Working Capacity: 500kg
- Minimum Extension: 1020mm
- Maximum Extension: 1430mm
- Nett Weight: 19kg
- Carton: 1530 x 120 x 120mm
- Gross Weight: 20kg
Intended Use
Safely supports an engine in place during repairs such as replacing engine mounts or removing the transmission or transaxle without removing the engine.
(0 reviews) -
Engine Stands & SupportsTQB BRANDS Engine Support Bar 500kg Dual Hook
Built to our TradeQuip “Made for the Trade” specifications, this transverse-mounted engine support bar has a two angle chain hook for safer and more stable chain support. This engine support bar features fully adjustable 4 point mounting system which will provide a very stable platform on any car. Weight rating is 500kg and includes eight rubber padded legs to prevent slipping and damage to cars finish. This tool features a dual hook design for holding engine or transmission in place. Finished in high gloss enamel for long life and durability. This design allows for improved stability, more flexibility and application to different vehicle types as well as added safety of 4 points of support and stability.
Perfectly suited for transverse and longitudinally-mounted engines alike.
Note: It is important that chains are hooked to both sides of hook, to ensure load is supported evenly.
Features- Cross bar feature for improved stability and more flexibility
- Dual hook assemblies for balanced support
- Adjustable to fit across most car bonnets
- Supports engine or transmission in place during repairs
- Extra long rubber cushioned support legs prevent damage to paint
- High gloss enamel finish
- Adjustment screws for load levelling
- Note: Chain not included
Specifications
- Safe Working Capacity: 500kg
- Minimum Extension: 1020mm
- Maximum Extension: 1630mm
- Nett Weight: 23kg
- Carton: 1730 x 180 x 80mm
- Gross Weight: 24kg
Intended Use
Safely supports an engine in place during repairs such as replacing engine mounts or removing the transmission or transaxle without removing the engine.
(0 reviews) -
Vices & AnvilsTQB BRANDS Engineers Vice Fixed with Anvil 125mm
This TradeQuip Cast Engineers Vice is designed for general-purpose, service or maintenance use. It features a tough cast iron body and slide with a machined steel screw and handle. This small foot print TradeQuip Engineers Vice has a fixed base for stability and forged serrated steel jaws to tightly grip the workpiece and keep it steady. TradeQuip Vices are designed to withstand a heavy amount of pressure with less risk of breakage. The anvil is perfect for shaping and fabrication work. The heavy metal cast construction permits them to tolerate tough and repeated work. Commonly used in workshops, garages and machinery shops.
Features
- Constructed from thick rugged cast iron
- CNC machined parts and fully ground rails
- Forge hardened steel serrated jaws
- Precision machined steel screw and handle
- Reinforced mounting lugs
- Flat and durable anvil surface incorporated
Specifications
- Cast Iron
- Jaw Width: 125mm
- Jaw Opening: 130mm
- Throat Depth: 69mm
- Anvil Size: 90x85mm
- Nett Weight: 9.5kg
(0 reviews) -
Vices & AnvilsTQB BRANDS Engineers Vice Fixed with Anvil 150mm
This TradeQuip Cast Engineers Vice is designed for general-purpose, service or maintenance use. It features a tough cast iron body and slide with a machined steel screw and handle. This small foot print TradeQuip Engineers Vice has a fixed base for stability and forged serrated steel jaws to tightly grip the workpiece and keep it steady. TradeQuip Vices are designed to withstand a heavy amount of pressure with less risk of breakage. The anvil is perfect for shaping and fabrication work. The heavy metal cast construction permits them to tolerate tough and repeated work. Commonly used in workshops, garages and machinery shops.
Features
- Constructed from thick rugged cast iron
- CNC machined parts and fully ground rails
- Forge hardened steel serrated jaws
- Precision machined steel screw and handle
- Reinforced mounting lugs
- Flat and durable anvil surface incorporated
Specifications
- Cast Iron
- Jaw Width: 150mm
- Jaw Opening: 150mm
- Throat Depth: 76mm
- Anvil Size: 100x105mm
- Distance Between Mounting Bolt Holes: 115mm centre to centre
- Nett Weight: 15kg
(0 reviews) -
Vices & AnvilsTQB BRANDS Engineers Vice Fixed with Anvil 200mm
This TradeQuip Cast Engineers Vice is designed for general-purpose, service or maintenance use. It features a tough cast iron body and slide with a machined steel screw and handle. This small foot print TradeQuip Engineers Vice has a fixed base for stability and forged serrated steel jaws to tightly grip the workpiece and keep it steady. TradeQuip Vices are designed to withstand a heavy amount of pressure with less risk of breakage. The anvil is perfect for shaping and fabrication work. The heavy metal cast construction permits them to tolerate tough and repeated work. Commonly used in workshops, garages and machinery shops.
Features
- Constructed from thick rugged cast iron
- CNC machined parts and fully ground rails
- Forge hardened steel serrated jaws
- Precision machined steel screw and handle
- Reinforced mounting lugs
- Flat and durable anvil surface incorporated
Specifications
- Jaw Width: 200mm
- 170mmThroat Depth: 88mm
- Anvil Size: 105x105mm
- Nett Weight: 23kg
(0 reviews) -
Vices & AnvilsTQB BRANDS Engineers Vice Multi-Purpose with Pipe Jaws 150mm
Constructed of ductile iron, the TradeQuip “Made for the Trade” Multi Purpose Bench Vice range is designed with rugged thick malleable cast body and precision machined jaws, ideal for medium duty work. With a swivel base, the vice body and jaw angle can be rotated to offer full flexibility for holding long and/or awkward working pieces. Our TradeQuip “Made for the Trade” Multi-Purpose Bench Vices do it all. Jaws rotate 360° for unlimited work piece positioning and clamping flat, as well as round stock (with the built-in pipe jaws). The 360° rotating head clamps material at any angle and the 90° left and right indexing offers quick set up as well as permanent pipe jaws and a v-jaw to hold round objects vertically.
TradeQuip “Made for the Trade” Multi-Purpose Bench Vices are built for professional durability and dependability. These vices are constructed from 30,000psi malleable cast iron and come equipped with replaceable cross-grooved steel jaws to provide a strong grip and prevent workpiece slippage. The built-in cast iron pipe jaws are grooved for enhanced grip and allow for easy clamping of pipe and/or other rounded material. A large anvil work surface on the back of the vice is perfect for hammering and shaping metal pieces. The 360° swivel base with a 360° swivel head (with lock down) offers maximum versatility for clamping most workpiece lengths at any angle.
Designed to meet the needs of most workshops, garages and machinery shops, the TradeQuip “Made for the Trade” Multi-Purpose Bench Vice range, produces reliability and versatility with a maximum clamping power that will get a wide variety of jobs done with confidence.
Features
- Body of rugged quality malleable cast iron
- Forge hardened steel serrated jaws
- Precision machined steel screw and handle
- Reinforced mounting lugs
- 360° Swivel base locks in place or greater versatility
- Jaws rotate 360° and lock for unlimited work piece positioning
- Holds flat stock as well as round stock with the built-in pipe jaws
- Large hardened anvil work surface
Specifications
- Jaw Width: 150mm
- Jaw Opening: 140mm
- Throat Depth: 80mm
- Pipe Jaw Maximum Diameter: 75mm
- Anvil Size: 80x65mm
- Mounting Pattern: 125mm/4-hole square
- Base Swivel Capability: 360°
- Jaw Rotation Capability: 360°
- Nett Weight: 20kg
(0 reviews) -
Vices & AnvilsTQB BRANDS Engineers Vice Swivel Base with Anvil 125mm
Toughened quality malleable cast iron body with a machined steel screw and handle, this TradeQuip “Made for the Trade” Engineers Bench Vice has forged steel serrated jaws to provide a sure grip and keep your workpiece steady. A large hardened anvil work surface is perfect for shaping and fabrication work. The robust swivel base offers flexibility for efficiency and a large machined centre slide keeps jaws precisely aligned under maximum clamping pressure.
Features
- Body of rugged quality malleable cast iron
- Forge hardened steel serrated jaws
- Precision machined steel screw and handle
- Reinforced mounting lugs
- Swivel base locks in place
- Large hardened anvil work surface incorporated
Specifications
- Jaw Width: 125mm
- Jaw Opening: 140mm
- Throat Depth: 76mm
- Anvil Size: 106x106mm
- Base Swivel: 120°
- Net Weight: 18kg
(0 reviews) -
Vices & AnvilsTQB BRANDS Engineers Vice Swivel Base with Anvil 150mm
Toughened quality malleable cast iron body with a machined steel screw and handle, this TradeQuip “Made for the Trade”Engineers Bench Vice has forged steel serrated jaws to provide a sure grip and keep your workpiece steady. A large hardened anvil work surface is perfect for shaping and fabrication work. The robust swivel base offers flexibility for efficiency and a large machined centre slide keeps jaws precisely aligned under maximum clamping pressure.
Features
- Body of rugged quality malleable cast iron
- Forge hardened steel serrated jaws
- Precision machined steel screw and handle
- Reinforced mounting lugs
- Swivel base locks in place
- Large hardened anvil work surface incorporated
Specifications
- Jaw Width: 150mm
- Jaw Opening: 170mm
- Throat Depth: 86mm
- Anvil Size: 127x127mm
- Net Weight: 27kg
(0 reviews) -
Vices & AnvilsTQB BRANDS Engineers Vice Swivel Base with Anvil 200mm
Toughened quality malleable cast iron body with a machined steel screw and handle, this TradeQuip “Made for the Trade” Engineers Bench Vice has forged steel serrated jaws to provide a sure grip and keep your workpiece steady. A large hardened anvil work surface is perfect for shaping and fabrication work. The robust swivel base offers flexibility for efficiency and a large machined centre slide keeps jaws precisely aligned under maximum clamping pressure.
Features
- Body of rugged quality malleable cast iron
- Forge hardened steel serrated jaws
- Precision machined steel screw and handle
- Reinforced mounting lugs
- Swivel base locks in place
- Large hardened anvil work surface incorporated
Specifications
- Jaw Width: 200mm
- Jaw Opening: 220mm
- Throat Depth: 110mm
- Anvil Size: 147x147mm
- Net Weight: 41kg
(0 reviews) -
Fans, Coolers, Heaters & Air ConTQB BRANDS Evaporative Cooler – 150W
With its compact size, this eQuipt “Designed to Deliver” Portable Evaporative Cooling unit is perfectly suited to smaller work spaces, yet still delivers an impressive amount of air output. This easy-to-operate unit produces up to 6,000 cubic metres of airflow per hour. It is fitted with a rugged, weather-resistant one-piece moulded polyethylene housing that will not crack or leak. The remote control 3-speed fan forces warm air over rigid water soaked evaporative cooling media to reduce ambient temperatures by up to 10°C . Adjustable swing louvre feature that offers swinging airflow and allows you to adjust the cooled air output to where you need it.
An evaporative cooler (also known as a desert cooler or wet air cooler) is a device that cools air through the evaporation of water. These units are well suited for climates where the air is hot and humidity is low. They combine the natural cooling properties of water with a steady breeze to lower indoor temperatures. Evaporative cooling will provide a substantial energy savings over refrigerated air units, while the simplicity of the design results in low maintenance requirements.
Compared to other climate control systems available, evaporative air cooling provides the most energy efficient temperature relief for commercial or industrial environments of any scale.
Up to 80% more economical than conventional air conditioning systems, our evaporative cooling systems have delivered proved cost reductions and operational returns for many industrial and mechanical workshops.
With the substantial savings of energy and the constant changes in the air, a portable evaporative cooler is ideally suited for area cooling or spot cooling of rooms, workshops, factories, laundries, schools, agricultural sheds, and more.
Water Consumption can increase by 300% due to ‘Relative Humidity’
Note: Evaporative Coolers operate by combining a variable airflow and water evaporation. How much water is used (Water Consumption) depends on the ‘Relative Humidity’ of the day and the fan speed setting to meet the required cooling levels. Relative Humidity (rh) is the ratio of the amount of water (as vapour) actually contained in the air to the maximum amount of water vapour that could be contained at the same temperature (saturation). For example, at 50% rh, the air contains 50% of the maximum (100%) amount of moisture (water vapour) that it could contain at the same temperature. Therefore when the relative humidity level is low all Evaporative Cooling units may consume a more significant amount of water (up to 300% more) than higher relative humidity ratio conditions.
Features
- One-piece moulded polyethylene housing will not crack and is rust and leak proof
- Two freezable ice blocks included to assist in reducing water tank temperatures in warmer conditions
- Environmentally-friendly alternative to traditional reverse cycle A/C
- Cools without chemicals or refrigerants
- Easy to remove cooling pads & filters for quick & easy maintenance
- Long-term dependability-near maintenance-free operation
- European design synchronous swing function
- Cools where traditional cooling methods are impractical or cost-prohibitive
- Easy to read water level sight gauge
- Manual pop-out filler door on front of unit
- Direct drive motor
- LCD 12.5 hour timer panel
- Nylon castors for easy portability
Specifications
- Power Unit: 220V 50Hz 150W 10amp plug
- Operating Current: 1.45A
- Max. Air Flow: 6,000 m3 per hour
- Noise Level: 65dB(A)
- Fan Diameter: 400mm 4-blade propeller
- Speed Control: 3-speed
- Effective Cooling Area: 45-55m2
- Water Consumption; 4-5 Litres per hour
- Water Tank Capacity: 45 Litres
- Dimension: 1185(H) x 620(W) x 430(D)
- Nett Weight: 17kg
- Gross Weight 20kg
NOTE: FREIGHT RATES MAY APPLY!
Intended Use:
This equipment is intended for cooling industrial or trade workshop/office environments. Best used in hot dry climates where the humidity is low, evaporative coolers are generally suitable for areas with dry summers, although their effectiveness will be reduced during the occasional periods of high humidity weather.
This product is an Industrial Product and not suitable for household use.
(0 reviews) -
Fans, Coolers, Heaters & Air ConTQB BRANDS Evaporative Cooler – 200W
With its compact size, this eQuipt “Designed to Deliver” Portable Evaporative Cooling unit is perfectly suited to smaller work spaces, yet still delivers an impressive amount of air output. This easy-to-operate unit produces up to 6,000 cubic metres of airflow per hour. It is fitted with a rugged, weather-resistant one-piece moulded polyethylene housing that will not crack or leak. The remote control 3-speed fan forces warm air over rigid water soaked evaporative cooling media to reduce ambient temperatures by up to 10°C . Adjustable swing louvre feature that offers swinging airflow and allows you to adjust the cooled air output to where you need it.
An evaporative cooler (also known as a desert cooler or wet air cooler) is a device that cools air through the evaporation of water. These units are well suited for climates where the air is hot and humidity is low. They combine the natural cooling properties of water with a steady breeze to lower indoor temperatures. Evaporative cooling will provide a substantial energy savings over refrigerated air units, while the simplicity of the design results in low maintenance requirements.
Compared to other climate control systems available, evaporative air cooling provides the most energy efficient temperature relief for commercial or industrial environments of any scale.
Up to 80% more economical than conventional air conditioning systems, our evaporative cooling systems have delivered proved cost reductions and operational returns for many industrial and mechanical workshops.
With the substantial savings of energy and the constant changes in the air, a portable evaporative cooler is ideally suited for area cooling or spot cooling of rooms, workshops, factories, laundries, schools, agricultural sheds, and more.
Water Consumption can increase by 300% due to ‘Relative Humidity’
Note: Evaporative Coolers operate by combining a variable airflow and water evaporation. How much water is used (Water Consumption) depends on the ‘Relative Humidity’ of the day and the fan speed setting to meet the required cooling levels. Relative Humidity (rh) is the ratio of the amount of water (as vapour) actually contained in the air to the maximum amount of water vapour that could be contained at the same temperature (saturation). For example, at 50% rh, the air contains 50% of the maximum (100%) amount of moisture (water vapour) that it could contain at the same temperature. Therefore when the relative humidity level is low all Evaporative Cooling units may consume a more significant amount of water (up to 300% more) than higher relative humidity ratio conditions.
Features
- One-piece moulded polyethylene housing will not crack and is rust and leak proof
- Environmentally-friendly alternative to traditional reverse cycle A/C
- Cools without chemicals or refrigerants
- Easy to remove cooling pads & filters for quick & easy maintenance
- Long-term dependability-near maintenance-free operation
- European design synchronous swing function
- Cools where traditional cooling methods are impractical or cost-prohibitive
- Easy to read water level sight tube gauge
- Dual pour in refill water inlet and/or 3/4″ hose fitting for automatic tap refill
- Conveniently located drain valve at bottom of tank for easy access
- Direct drive
- LCD 12 hour timer panel
- Nylon castors for easy portability
Specifications
- Power Unit: 220V 50Hz 200W 10amp plug
- Operating Current: 2.4A
- Power Cord Length: 2300mm
- Max. Air Flow: 9,000 m3 per hour
- Noise Level: 70dB(A)
- Speed Control: 3-speed
- Fan Diameter: 520mm 4-blade propeller
- Effective Cooling Area: 50-60m2
- Water Consumption; 5-6 Litres per hour
- Water Tank Capacity: 70 Litres
- Dimension: 1360(H) x 820(W) x 545(D)
- Nett Weight: 33kg
- Gross Weight 36kg
NOTE: FREIGHT RATES MAY APPLY!
Intended Use:
This equipment is intended for cooling industrial or trade workshop/office environments. Best used in hot dry climates where the humidity is low, evaporative coolers are generally suitable for areas with dry summers, although their effectiveness will be reduced during the occasional periods of high humidity weather.
This product is an Industrial Product and not suitable for household use.
(0 reviews) -
Fans, Coolers, Heaters & Air ConTQB BRANDS Evaporative Cooler – 450W
With its compact size, this eQuipt “Designed to Deliver” Portable Evaporative Cooling unit is perfectly suited to smaller work spaces, yet still delivers an impressive amount of air output. This easy-to-operate unit produces up to 6,000 cubic metres of airflow per hour. It is fitted with a rugged, weather-resistant one-piece moulded polyethylene housing that will not crack or leak. The remote control 3-speed fan forces warm air over rigid water soaked evaporative cooling media to reduce ambient temperatures by up to 10°C . Adjustable swing louvre feature that offers swinging airflow and allows you to adjust the cooled air output to where you need it.
An evaporative cooler (also known as a desert cooler or wet air cooler) is a device that cools air through the evaporation of water. These units are well suited for climates where the air is hot and humidity is low. They combine the natural cooling properties of water with a steady breeze to lower indoor temperatures. Evaporative cooling will provide a substantial energy savings over refrigerated air units, while the simplicity of the design results in low maintenance requirements.
Compared to other climate control systems available, evaporative air cooling provides the most energy efficient temperature relief for commercial or industrial environments of any scale.
Up to 80% more economical than conventional air conditioning systems, our evaporative cooling systems have delivered proved cost reductions and operational returns for many industrial and mechanical workshops.
With the substantial savings of energy and the constant changes in the air, a portable evaporative cooler is ideally suited for area cooling or spot cooling of rooms, workshops, factories, laundries, schools, agricultural sheds, and more.
Features
- One-piece moulded polyethylene housing will not crack and is rust and leak proof
- Environmentally-friendly alternative to traditional reverse cycle A/C
- Cools without chemicals or refrigerants
- Long-term dependability-near maintenance-free operation
- European design synchronous swing function
- Cools where traditional cooling methods are impractical or cost-prohibitive
- Easy to read water level sight tube gauge
- Dual pour in refill water inlet and/or 3/4″ hose fitting for automatic tap refill
- Adjustable water flow and drain valve
- Direct drive
- Nylon castors for easy portability
- Remote control speed adjustment
Specifications
- Power Unit: 220-240V 50/60Hz 450W 10amp plug
- Operating Current: 2.1A
- Max. Air Flow: 12,000 m3 per hour
- Noise Level: <70dB(A)
- Speed Control: 3-speed
- Effective Cooling Area: 60-80m2
- Water Consumption; 8-10 Litres per hour
- Water Tank Capacity: 60 Litres
- Dimension: 1430(H) x 900(W) x 560(D)
- Nett Weight: 45kg
- Gross Weight 49kg
NOTE: FREIGHT RATES MAY APPLY!
Water Consumption can increase by 300% due to ‘Relative Humidity’
Note: Evaporative Coolers operate by combining a variable airflow and water evaporation. How much water is used (Water Consumption) depends on the ‘Relative Humidity’ of the day and the fan speed setting to meet the required cooling levels. Relative Humidity (rh) is the ratio of the amount of water (as vapour) actually contained in the air to the maximum amount of water vapour that could be contained at the same temperature (saturation). For example, at 50% rh, the air contains 50% of the maximum (100%) amount of moisture (water vapour) that it could contain at the same temperature. Therefore when the relative humidity level is low all Evaporative Cooling units may consume a more significant amount of water (up to 300% more) than higher relative humidity ratio conditions.
Intended Use:
This equipment is intended for cooling industrial or trade workshop/office environments. Best used in hot dry climates where the humidity is low, evaporative coolers are generally suitable for areas with dry summers, although their effectiveness will be reduced during the occasional periods of high humidity weather.
This product is an Industrial Product and not suitable for household use.
(0 reviews) -
Fans, Coolers, Heaters & Air ConTQB BRANDS Evaporative Cooler – 550W
With its compact size, this TradeQuip “Made for the Trade” Portable Evaporative Cooling unit is perfectly suited to smaller work areas, yet still delivers an impressive amount of air output. Huge in performance, this easy-to-operate unit produces up to 18,000 cubic metres of airflow per hour. It is fitted with a rugged, weather-resistant one-piece moulded polyethylene housing that will not crack or leak. The remote control 3-speed fan forces warm air over rigid water soaked evaporative cooling media to reduce ambient temperatures by up to 10°C . The adjustable swing louvre feature offers swinging airflow and can be adjusted to direct the cooled air output to where it is needed.
An evaporative cooler (also known as a desert cooler, swamp cooler or wet air cooler) is a device that cools air through the evaporation of water. These units are well suited for climates where the air is hot and humidity is low. They combine the natural cooling properties of water, with a steady breeze… to lower indoor temperatures. Evaporative cooling will provide a substantial energy savings over refrigerated air units, whilst the simplicity of the design results in low maintenance requirements.
With the substantial savings of energy and the constant changes in the air, a portable evaporative cooler is ideally suited for area cooling or spot cooling of rooms, workshops, factories, laundries, schools, agricultural sheds, and more. (Previous models include product code/s; 1028T)
Water Consumption can increase by 300% due to ‘Relative Humidity’
Note: Evaporative Coolers operate by combining a variable airflow and water evaporation. How much water is used (Water Consumption) depends on the ‘Relative Humidity’ of the day and the fan speed setting to meet the required cooling levels. Relative Humidity (rh) is the ratio of the amount of water (as vapour) actually contained in the air to the maximum amount of water vapour that could be contained at the same temperature (saturation). For example, at 50%(rh), the air contains 50% of the maximum (100%) amount of moisture (water vapour) that it could contain at the same temperature. Therefore when the relative humidity level is low all Evaporative Cooling units may consume a more significant amount of water (up to 300% more) than higher relative humidity ratio conditions.
Features
- One-piece moulded polyethylene housing will not crack and is rust and leak proof
- Environmentally-friendly alternative to traditional reverse cycle A/C
- Cools without chemicals or refrigerants
- Long-term dependability-near maintenance-free operation
- European design synchronous swing function
- Cools where traditional cooling methods are impractical or cost-prohibitive
- Easy to read water level sight tube gauge
- Dual pour in refill water inlet and/or 3/4″ hose fitting for automatic tap refill
- Adjustable water flow and drain valve
- Direct drive
- LCD 24hour timer panel
- Nylon castors for easy portability
- Remote control speed adjustment
Specifications
- Power Unit: 240V 50Hz 550W 10amp plug
- Max. Air Flow: 18,000 m3 per hour
- Noise Level: 70dB(A)
- Fan Diameter: 750mm (3 Blade)
- Speed Control: 3-speed
- Effective Cooling Area: 100-150m2
- Water Consumption; 12-18 Litres per hour
- Water Tank Capacity: 100 Litres
- Castor Wheels: 100mm Dia (2 with brakes)
- Ingress Protection: IP42 Rated
- Dimension: 1510(H) x 1120(W) x 680(D)
- Nett Weight: 58kg
- Carton: 1510 x 1120 x 680mm
- Gross Weight 68kg
NOTE: FREIGHT RATES MAY APPLY!
Intended Use:
This equipment is intended for cooling industrial or trade workshop/office environments. Best used in hot dry climates where the humidity is low, evaporative coolers are generally suitable for areas with dry summers, although their effectiveness will be reduced during the occasional periods of high humidity weather.
This product is an Industrial Product and not suitable for household use.
(0 reviews) -
Fans, Coolers, Heaters & Air ConTQB BRANDS Evaporative Cooler – 750W
With its compact size, this TradeQuip “Made for the Trade” Portable Evaporative Cooling unit is perfectly suited to smaller work areas, yet still delivers an impressive amount of air output. Huge in performance, this easy-to-operate unit produces up to 23,000 cubic metres of airflow per hour. It is fitted with a rugged, weather-resistant one-piece moulded polyethylene housing that will not crack or leak. The remote control 3-speed fan forces warm air over rigid water soaked evaporative cooling media to reduce ambient temperatures by up to 10°C . Adjustable swing louvre feature that offers swinging airflow and allows you to adjust the cooled air output to where you need it.
An evaporative cooler (also known as a desert cooler or wet air cooler) is a device that cools air through the evaporation of water. These units are well suited for climates where the air is hot and humidity is low. They combine the natural cooling properties of water with a steady breeze to lower indoor temperatures. Evaporative cooling will provide a substantial energy savings over refrigerated air units, while the simplicity of the design results in low maintenance requirements.
Compared to other climate control systems available, evaporative air cooling provides the most energy efficient temperature relief for commercial or industrial environments of any scale.
Up to 80% more economical than conventional air conditioning systems, our evaporative cooling systems have delivered proved cost reductions and operational returns for many industrial and mechanical workshops.
With the substantial savings of energy and the constant changes in the air, a portable evaporative cooler is ideally suited for area cooling or spot cooling of rooms, workshops, factories, laundries, schools, agricultural sheds, and more.
Water Consumption can increase by 300% due to ‘Relative Humidity’
Note: Evaporative Coolers operate by combining a variable airflow and water evaporation. How much water is used (Water Consumption) depends on the ‘Relative Humidity’ of the day and the fan speed setting to meet the required cooling levels. Relative Humidity (rh) is the ratio of the amount of water (as vapour) actually contained in the air to the maximum amount of water vapour that could be contained at the same temperature (saturation). For example, at 50% rh, the air contains 50% of the maximum (100%) amount of moisture (water vapour) that it could contain at the same temperature. Therefore when the relative humidity level is low all Evaporative Cooling units may consume a more significant amount of water (up to 300% more) than higher relative humidity ratio conditions.
Features
- One-piece moulded polyethylene housing will not crack and is rust and leak proof
- Environmentally-friendly alternative to traditional reverse cycle A/C
- Cools without chemicals or refrigerants
- Long-term dependability-near maintenance-free operation
- European design synchronous swing function
- Cools where traditional cooling methods are impractical or cost-prohibitive
- Easy to read water level sight tube gauge
- Dual pour in refill water inlet and/or 3/4″ hose fitting for automatic tap refill
- Adjustable water flow and drain valve
- Direct drive
- LCD 24hour timer panel
- Nylon castors for easy portability
- Remote control speed adjustment
Specifications
- Power Unit: 240V 50Hz 750W 10amp plug
- Max. Air Flow: 23,000 m3 per hour
- Noise Level: 70dB(A)
- Fan Diameter: 750mm (5 Blade)
- Speed Control: 3-speed
- Effective Cooling Area: 150-200m2
- Water Consumption; 10-15 Litres per hour
- Water Tank Capacity: 130 Litres
- Castor Wheels: 100mm Dia (2 with brakes)
- Ingress Protection: IP42 Rated
- Dimension: 1730(H) x 1120(W) x 680(D)
- Nett Weight: 63kg
- Carton: 1130 x 680 x 1590mm
- Gross Weight 68kg
NOTE: FREIGHT RATES MAY APPLY!
Intended Use:
This equipment is intended for cooling industrial or trade workshop/office environments. Best used in hot dry climates where the humidity is low, evaporative coolers are generally suitable for areas with dry summers, although their effectiveness will be reduced during the occasional periods of high humidity weather.
This product is an Industrial Product and not suitable for household use.
(0 reviews) -
Fans, Coolers, Heaters & Air ConTQB BRANDS Evaporative Cooler 750W
Using the process of evaporation, this TradeQuip “Made for the Trade” Portable Direct Drive 3-Speed Cooling Unit will cool the air up to 10°C in all large hard-to-cool working areas. The one-piece moulded polyethylene housing will not crack, leak and is rugged enough for any workshop or outdoor environment. The remote control 3-speed fan forces warm air over rigid water soaked evaporative cooling media to reduce ambient temperatures by up to 10°C.
Ideal for cooling high performance vehicles when used with Dynometers.
An evaporative cooler (also known as a desert cooler, swamp cooler or wet air cooler) is a device that cools air through the evaporation of water. These units are well suited for climates where the air is hot and humidity is low. They combine the natural cooling properties of water with a steady breeze to lower indoor temperatures. Evaporative cooling will provide a substantial energy savings over refrigerated air units, while the simplicity of the design results in low maintenance requirements.
With the substantial savings of energy and the constant changes in the air, a portable evaporative cooler is ideally suited for area cooling or spot cooling of large workshops, factories, schools, agricultural sheds, and more.
Water Consumption can increase by 300% due to ‘Relative Humidity’
Note: Evaporative Coolers operate by combining a variable airflow and water evaporation. How much water is used (Water Consumption) depends on the ‘Relative Humidity’ of the day and the fan speed setting to meet the required cooling levels. Relative Humidity (rh) is the ratio of the amount of water (as vapour) actually contained in the air to the maximum amount of water vapour that could be contained at the same temperature (saturation). For example, at 50% rh, the air contains 50% of the maximum (100%) amount of moisture (water vapour) that it could contain at the same temperature. Therefore when the relative humidity level is low all Evaporative Cooling units may consume a more significant amount of water (up to 300% more) than higher relative humidity ratio conditions.
Features
- One-piece moulded polyethylene housing will not crack and is rust and leak proof
- Environmentally-friendly alternative to traditional A/C
- Cools where traditional cooling methods are impractical or cost-prohibitive
- Water level sight tube
- Dual pour in refill water inlet and/or 3/4″ hose fitting for automatic tap refill
- Adjustable water flow and drain valve
- Direct drive
- Durable and long lasting
- Nylon castors for easy portability
- Remote control speed adjustment
- Low installation and maintenance costs
- 75% less electricity usage
- Adds moisture to the air, for dry environments
- No ozone damaging refrigerants
Specifications
- Power Unit: 240V 50Hz 750W 10amp plug
- Max. Air Flow: 23,000m3
- Noise Level: 75dB(A)
- Fan Diameter: 900mm
- Speed Control: 3-speed
- Cooling Area: 200-260m2
- Water Consumption; 20-35 Litres per hour
- Water Tank Capacity: 200 Litres
- Castor Wheels: 150mm Dia (4 with brakes)
- Ingress Protection: IP42 Rated
- Dimension: 1800(H) x 1600(W) x 780(D)
- Net Weight: 128kg
- Carton: 1800 x 1600 x 780mm
- Gross Weight 130kg
NOTE: FREIGHT RATES MAY APPLY!
Intended Use
This equipment is intended for cooling industrial or trade workshop/office environments. Best used in hot dry climates where the humidity is low, evaporative coolers are generally suitable for areas with dry summers, although their effectiveness will be reduced during the occasional periods of high humidity weather.
This product is an Industrial Product and not suitable for household use.
(0 reviews) -
Fans, Coolers, Heaters & Air ConTQB BRANDS Evaporative Cooler Cover
This TradeQuip Protective Cover keeps TradeQuip Portable Evaporative Coolers clean, protected and dust-free when not in use. This economical and effective cover is made from durable black fabric. The low-profile design is compatible with TradeQuip 1027T, 1028T and 1035T models.
- Water-resistant fabric
- Lightweight and breathable
- UV treated
- Easy to use
Intended Use:
To protect 1027T and 1035T TradeQuip Portable Evaporative Coolers when not in use.
About the TradeQuip brand
The ‘TradeQuip’ brand of workshop equipment, is designed for use in a demanding workshop environment by professional users. With proven and trusted “Made for the Trade” reliability, ‘TradeQuip’ branded products offer the very best in performance for an affordable price. All backed by a 1year trade guarantee across 1,000+ distributors Australia wide.
(0 reviews) -
Vices & AnvilsTQB BRANDS Fabricated Steel Offset Vice 150mm
This TradeQuip “Made for the Trade” Engineers Vice is designed for all heavy duty work and manufactured from heavy steel plate. Precision machined surfaces ensures a long life smooth operation with case hardened replaceable steel jaws, replaceable nut, corrosion resistant screw and handle. The offset design offers the convenience to hold a long vertical workpiece in the full width of the jaws without obstruction from the main body of the vice. This is an all steel fabricated offset bench vice, manufactured from heavy steel plate and strong welded finish. The surface hardened slides provide a smooth, precise and efficient operation. (Previous models include product code/s; 7007).
Features
- Offset jaws allow the workpiece to be held in a vertical position
- Fixed offset base – right hand
- Solid fabricated steel construction
- 4 mounting holes (13mm Dia)
Specifications
- Jaw Width: 150mm / 6″
- Throat Depth: 103mm
- Overall Width: 245mm
- Overall Height: 194mm
- Maximum Opening: 140mm
- Overall Length: (closed jaw) 475mm
- Net Weight: 21kg
- Carton: 510 x 295 x 210mm
- Gross Weight: 26kg
(0 reviews) -
Engine Stands & SupportsTQB BRANDS Foldable Engine Stand 680kg
This TradeQuip “Made for the Trade” 680kg Engine Stand is engineered from heavy-duty steel with a powder-coated finish, providing a durable and professional-grade solution for handling passenger and light commercial vehicle engines. Designed for maximum accessibility, the 360-degree rotating head and adjustable mounting arms allow for easy positioning during dismantling and re-assembly tasks across a wide range of engine blocks. The unit balances high-capacity strength with workshop efficiency, featuring smooth-rolling swivel casters for easy maneuverability and a quick-folding mechanism for space-saving storage when not in use.
Features
- Constructed with heavy-duty steel, providing long term durability with an industrial luster paint
- Mounting head features (4) adjustable arms and 360-degree rotation, allowing for easy access to any part of the engine
- Securely holds most foreign and domestic engine blocks
- Features a 680KG load capacity
- Equipped with 5 castors, including (2) 95mm fixed and (3) 76mm swivel castors, providing smooth and easy manoeuvrability.
- Quick folding mechanism allows for saving space when not in use during storage
- Powder coated finish for rust resistance and manufactured with precision for quality and performance
Specifications
- Safe working capacity: 680kg
- Maximum engine displacement: 5L
- No. of engine cylinders: 4-8
- Maximum engine length: 700mm
- 6 Locking positions
- 360º rotating head
- Dimensions (unfolded): 1000L x 800W x 1150H mm
- Dimensions (folded): 560L x 800W x 1150H mm
- Net weight: 32.4kg
- Gross weight: 33.5kg
Intended Use
For safe handling and positioning of passenger and light commercial vehicle engines during dismantling and re-assembly.
(0 reviews) -
Workshop Presses & AccessoriesTQB BRANDS FWD Wheel Bearing Kit
This versatile TradeQuip Universal FWD Wheel Bearing Kit includes everything you need to remove and install bushes, bearings and seals. Constructed from heat-treated forged high carbon steel, this durable set is perfect for the removal and installation for Bearing bushes ,Silent bearing, Hydraulic bearing and Rubber bearing. This units comes in an individually organised carrying case, making it perfect for both the automotive professional or serious DIY enthusiast. The professional “Made for the Trade” 23pce FWD Wheel Bearing Kit has applications across several industries.
Features- 23 Piece Set Constructed from heat-treated forged carbon steel
- Sturdy Blow Mould Case
Specifications
- Hub Screw Length: 207mm
- Hub Screw Drive: 32; 38mm
- Sleeve External: 76.5 x 65; 86 x 77; 91 x 81.5; 102 x 92mm
- Drift Sizes: 50; 55; 59; 63; 66.5; 70; 71.5; 73; 73.5; 75, 77.5; 81.4; 83.3; 86; 88.4; 102mm
Intended Use
This FWD WHEEL BEARING KIT’s intended use is for the removal and installation of bushes, bearings and seals, races, bearings, sprockets and pulleys on cars, trucks, off-road construction equipment and machinery
(0 reviews) -
Blasting EquipmentTQB BRANDS Garnet Blasting Media Abrasive 20/40
TradeQuip “Made for the Trade” Garnet Blasting Media Abrasive is designed for use in conjunction with our TradeQuip Mobile Blasting Kits and Blasting Cabinets. Garnet is a gemstone with excellent naturally abrasive properties. This hard abrasive is fast-cutting, low-dust producing and low-consuming, ideal for removing tough coatings, paint, rust and mill scale from steel. Garnet also permits precise feathering control. A good general outdoor surface preparation abrasive. It has been specified for use with TradeQuip “Made for the Trade” blasting equipment.
Features
- Fast removal of heavy rust and stubborn paint coatings
- Low consumption rate
- Deep etching
- Used for general maintenance and cleaning
- Ideal for preparation of most automotive and industrial coatings
- Widely used for car panel sandblasting and metal cleaning
Specifications
- Mesh: 20/40
- Dust Factor: Low
- Recyclability: 5/10
- Profile Range: 50-85 μm
- Blasting Rate: 15-20 sqm per hour
- Consumption Rate: 8-10kg per sqm
- Weight: 25kg
NOTE: We recommend the use of personal protective equipment. Always wear a respiratory filter or mask over your mouth when operating this unit. You will create a cloud of abrasive media material and debris which should not be inhaled
Choosing the right abrasive media
Garnet
Garnet is one of the last few abrasives that are naturally mined. It is an industrial gemstone that creates a profile virtually free of embedment, which makes it excellent for coating adhesion, as well as applications where low or no transfer of grit into the substrate can be tolerated. Garnet is generally used when paint, rust, and scale have to be removed from steel, such as car/truck frames, tanks, heavy machinery, farm equipment, etc. Garnet is one of the most economical abrasive and is the best choice for large blast projects. Best uses: rust removal, heavy scale removal, paint and coatings removal on heavy-gauge steel.
(0 reviews) -
Blasting Equipment
TQB BRANDS Garnet Blasting Media Abrasive 30/60
The TradeQuip “Made for the Trade” Garnet Blasting Media Abrasive is designed for use in conjunction with our TradeQuip Mobile Blasting Kits and Blasting Cabinets. Garnet is a gemstone with excellent naturally abrasive properties. This hard abrasive is fast-cutting, low-dust producing and low-consuming, ideal for removing tough coatings, paint, rust and mill scale from steel. Garnet also permits precise feathering control. A good general outdoor surface preparation abrasive. It has been specified for use with TradeQuip “Made for the Trade” blasting equipment.
Features
- Fast removal of medium rust and paint
- Low consumption rate
- Ideal for tough coatings and removing mill scale
- Used for general outdoor surface preparation
- Ideal for preparation of most automotive and industrial coatings
- Widely used for car panel sandblasting, machinery cleaning, parts restoration
Specifications
- Mesh: 30/60
- Shape: Sub Angular
- Hardness: 7.0 – 7.5 MOHS
- Density: 3.5-4.3 SG
- Blasting Speed: Up to 32.5 m2/hr
- Dust Factor: Low
- Recyclability: 5/10
- Profile Range: 63 – 82.5 µ
- Consumption Rate: 7.3-14kg/m2
- Weight: 25kg
NOTE: We recommend the use of personal protective equipment. Always wear a respiratory filter or mask over your mouth when operating this unit. You will create a cloud of abrasive media material and debris which should not be inhaled.
Choosing the right abrasive media
Garnet
Garnet is one of the last few abrasives that are naturally mined. It is an industrial gemstone that creates a profile virtually free of embedment, which makes it excellent for coating adhesion, as well as applications where low or no transfer of grit into the substrate can be tolerated. Garnet is generally used when paint, rust, and scale have to be removed from steel, such as car/truck frames, tanks, heavy machinery, farm equipment, etc. Garnet is one of the most economical abrasive and is the best choice for large blast projects. Best uses: rust removal, heavy scale removal, paint and coatings removal on heavy-gauge steel.
(0 reviews) -
Hand ToolsTQB BRANDS Gear Puller Kit – Hydraulic 23pce
This versatile “TradeQuip” Hydraulic Puller Set includes everything you need to pull gears from 20mm to 105mm in diameter. Constructed from heat-treated steel, this durable set is perfect for pulling bearings, timing gears, steering wheels and pulleys on most cars and light trucks. This gear puller set comes in an individually organised carrying case, making it perfect for both the automotive professional or serious DIY enthusiast.
Features- Quality ram for durability & reliability
- Includes bearing separator & extensions rods
- 2 or 3 Jaw Operation
- Heat-treated Chrome Vanadium steel
- Hydraulic ram develops up to 10,000kg
- Hardened to HRC 42-45
- Twin and triple heads included for assembling 2-jaw and 3-jaw pullers
- Housed in a blow mould storage case
- Rated to 80kN providing10,000kg of force
Specifications
- Capacity: 10,000kg
- Bearing Separator: 20-105mm
- Twin/triple head, beam and legs to build: 100, 150 and 200mm
- Two and three leg hydraulic pullers with separator capacity: 75-105mm
- Size: 355L x 195W x 150Hmm
Intended Use
This for pulling bearings, timing gears, steering wheels and pulleys on most cars and light trucks.
(0 reviews)