Stands & Ramps

The BORUM Industrial Ultra Heavy Duty Jack Stand is a reinforced pin style jack stand with industrial quality design and support bracing system to sustain heavy loads up to 15,000kg. Adjusts to match the job with a 445mm minimum lift height and 631mm maximum lift height !!  Featuring an Ultra Heavy-Duty Industrial design, these tough stands are ideal for construction, farm, truck, bus, earth moving equipment and fleet vehicle maintenance workshop use.

Features

• Manufactured from high-grade steel and built to exacting standards for quality and durability
• Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
• Paint is oil, grease and dirt-resistant for easy cleanup
• High strength locking pin
• Controlled pin holes for easy height adjustments
• Turned post slide for easy quick adjustments
• Heavy-gauge steel Gusseted uprights prevent distortion or twisting
• Rugged base provides plenty of stability
• Conveniently located carry handle
• Sold individually (not in pairs)

Specifications

• Safe Working Capacity: 15,000kg (individually rated but must be used in pairs for safe usage)
• Maximum Height: 631mm
• Minimum Height: 445mm
• Adjustable increments: 60mm
• Saddle Width: 140mm
• Base Dimensions: 300 x 330mm
• Carton: 470 x 380 x 380mm (Single unit)
• Weight: 23.5kg (each)

Intended Use

Heavy duty fleet and maintenance workshops where a lifted vehicle or trailer is to be supported before conducting servicing or repair work.

NOTE:  Sold individually but recommended to be used in pairs

IMPORTANT:   NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use jack stands.

The BORUM Industrial Ultra Heavy Duty Jack Stand is a reinforced pin style jack stand with industrial quality design and support bracing system to sustain heavy loads up to 25,000kg. Adjusts to match the job with a 415mm minimum lift height and 539mm maximum lift height !!  Featuring an Ultra Heavy-Duty Industrial design, these tough stands are ideal for construction, farm, truck, bus, earth moving equipment and fleet vehicle maintenance workshop use.

Features

• Manufactured from high-grade steel and built to exacting standards for quality and durability
• Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
• Paint is oil, grease and dirt-resistant for easy cleanup
• High strength locking pin
• Controlled pin holes for easy height adjustments
• Turned post slide for easy quick adjustments
• Heavy-gauge steel Gusseted uprights prevent distortion or twisting
• Rugged base provides plenty of stability
• Conveniently located carry handle
• Sold individually (not in pairs)

Specifications

• Safe Working Capacity: 25,000kg (individually rated but must be used in pairs for safe usage)
• Maximum Height: 539mm
• Minimum Height: 415mm
• Adjustable increments: 65mm
• Base Dimensions: 300 x 330mm
• Carton: 430 x 380 x 380mm (Single unit)
• Weight: 24.4kg (each)

Intended Use

Heavy duty fleet and maintenance workshops where a lifted vehicle or trailer is to be supported before conducting servicing or repair work.

NOTE:  Sold individually but recommended to be used in pairs

IMPORTANT:   NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use jack stands.

The BORUM Industrial Ultra Heavy Duty Jack Stand is a reinforced pin style jack stand with industrial quality design and support bracing system to sustain heavy loads up to 15,000kg. Adjusts to match the job with a 645mm minimum lift height and 1077mm maximum lift height !!  Featuring an Ultra Heavy-Duty Industrial design, these tough stands are ideal for construction, farm, truck, bus, earth moving equipment and fleet vehicle maintenance workshop use.

Features

• Manufactured from high-grade steel and built to exacting standards for quality and durability
• Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
• Paint is oil, grease and dirt-resistant for easy cleanup
• High strength locking pin
• Controlled pin holes for easy height adjustments
• Turned post slide for easy quick adjustments
• Heavy-gauge steel Gusseted uprights prevent distortion or twisting
• Rugged base provides plenty of stability
• Conveniently located carry handle
• Sold individually (not in pairs)

Specifications

• Safe Working Capacity: 15,000kg (individually rated but must be used in pairs for safe usage)
• Maximum Height: 1077mm
• Minimum Height: 645mm
• Adjustable increments: 70mm
• Saddle Width: 140mm
• Base Dimensions: 460 x 460mm
• Carton: 670 x 380 x 380mm (Single unit)
• Weight: 35.4kg (each)

Intended Use

Heavy duty fleet and maintenance workshops where a lifted vehicle or trailer is to be supported before conducting servicing or repair work.

NOTE: Sold individually but recommended to be used in pairs

IMPORTANT:   NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use jack stands.

The BORUM Industrial Ultra Heavy Duty Jack Stand is a reinforced pin style jack stand with industrial quality design and support bracing system to sustain heavy loads up to 25,000kg. Adjusts to match the job with a 680mm minimum lift height and 968mm maximum lift height !!  Featuring an Ultra Heavy-Duty Industrial design, these tough stands are ideal for construction, farm, truck, bus, earth moving equipment and fleet vehicle maintenance workshop use.

Features

• Manufactured from high-grade steel and built to exacting standards for quality and durability
• Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
• Paint is oil, grease and dirt-resistant for easy cleanup
• High strength locking pin
• Controlled pin holes for easy height adjustments
• Turned post slide for easy quick adjustments
• Heavy-gauge steel Gusseted uprights prevent distortion or twisting
• Rugged base provides plenty of stability
• Conveniently located carry handle
• Sold individually (not in pairs)

Specifications

• Safe Working Capacity: 25,000kg (individually rated but must be used in pairs for safe usage)
• Maximum Height: 968mm
• Minimum Height: 680mm
• Adjustable increments: 70mm
• Base Dimensions: 460 x 460mm
• Carton: 670 x 380 x 380mm (Single unit)
• Weight: 38.5kg (each)

Intended Use

Heavy duty fleet and maintenance workshops where a lifted vehicle or trailer is to be supported before conducting servicing or repair work.

NOTE: Sold individually but recommended to be used in pairs

IMPORTANT:   NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use jack stands.

TradeQuip “Made for the Trade” Adjustable Jack Stands are ideally suited to the professional trade workshop. These ratchet type axle stands are designed with a cast iron support post, tough steel plate welded base and deep saddle for positive location under the vehicle. The cast iron post is equipped with angled teeth to prevent accidental release of load – the more weight applied, the tighter the post is locked.

We often forget that working with cars and other vehicles can be a dangerous job. It’s easy to get complacent about yours and your employees’ safety when you have years of experience, however accidents can happen to anyone. Although garage and bottle jacks can lift heavy loads they are not designed to keep them there, so when the vehicle has been jacked up it’s crucial that it is placed on a jack stand.

TradeQuip jack stands are excellently designed to ensure you maximum safety. They have wide feet providing a strong base.

(Previous models include product code/s; 8TJS)

Features

• Constructed of high-grade steel and built to exacting standards for quality and durability
• Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
• Paint is oil, grease and dirt-resistant for easy cleanup
• Quick action adjustable height mechanism
• Welded steel frame & cast iron support
• Adjustable height
• Reinforced shaft for added strength stability
• Sold in pairs and only recommended to be used in pairs

Specifications

• Safe Working Capacity: 8,000kg(when used as a pair)
• Minimum Height: 468mm
• Maximum Height: 715mm
• Saddle Size: 125×40(mm)
• Base Size: 324 x 294mm
• Tested to Australian Standard AS2538:2016
• Carton: 350 x 320 x 580mm
• Weight: 30kg

Intended Use

In pairs for passenger vehicle use, where a lifted vehicle is to be supported before conducting servicing or repair work.

NOTE: Sold in pairs and only recommended to be used in pairs

IMPORTANT:   NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use jack stands.

The Borum Industrial Portable Truck Ramp Set is designed for maintenance and servicing work on trucks, buses and forklifts allowing easy and safe access to the undercarriage of vehicles. Easy and safe to use with a 700mm incline and 500mm of horizontal deck with safety flange to prevent fork truck from rolling off the deck. These robust ramps weigh just under 80kg each and are fitted with a unique wheel mechanism which raises and lowers for easy moving. These 463mm wide steel truck ramps feature non-skid bases and non-slip traction plates to keep the ramps and their load in place. Handle retracts for out of the way safety and storage. Sold in pairs.  (Previous models include product code/s; 1150)

Features

• Portable ramps that adhere to the floor like glue
• Pull the handle out, rotate it up to lock the wheels down for very easy maneuverability around workshop
• Large wheel designs for extra durability
• Long retractable T-handle for easy positioning
• “NON-SKID BASE” – Four ply pads of rubber grips are bolted and glued to the 6mm steel floor plates and they will not skid ahead of the wheels
• Replaces need for a pit or hoist, and at a fraction of the cost and floor space
• Also very popular in Motor Home, Bus and Forklift maintenance workshops

Specifications

• Safe Working Load: 20,000kg (per pair)
• Max Vehicle Tyre Width: 393mm
• Frame Height: 242mm
• Frame Width: 463mm
• Frame Length: 1160mm
• Handle Length: 860mm
• Ramp Angle: 18°
• Sold in pairs
• Carton: 1290 x 500 x 260mm ( x 2 )
• Gross Weight: 160kg (80kg each carton)

Intended Use

For elevating the front or rear of vehicle to access chassis frame and/or components. Particularly useful on vehicles with low profile clearance or ground-effects

The BORUM Industrial  10,000kg Heavy Duty Support Stand is a reinforced pin style stand with industrial quality design and support bracing system to sustain heavy loads up to 10,000kg. Adjusts to match the job with a 720mm minimum lift height and 1190mm maximum lift height !!  Featuring Heavy-Duty Industrial design, these tough stands are ideal for construction, farm, truck, bus, earth moving equipment and fleet vehicle maintenance workshop use. Big wheeled and larger vehicles like trucks and earthmovers require a strong, stable and tall type of jack stand.

With its 10,000kg lift capacity (each stand), this is definitely a perfect fit in its class. Featuring a very stable 4 leg steel base system made with high-grade pipe steel, that provides plenty of stability and security. Large saddles with a flat top base are designed and a double ear support system, secure any large vehicle’s steel frame underneath and to give confidence that the vehicle load is very stable. Once the multiple pin post adjustment locks in, there’s no vehicle slipping even with the heaviest vehicle. The maximum adjustable height of 1190mm, ensures there are no cramped areas are hard to reach when using this high profile truck support stand.

Features

• Stable 4 legged stability
• Manufactured from high-grade steel and built to exacting standards for quality and durability
• Large saddle with double ear support system
• Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
• Paint is oil, grease and dirt-resistant for easy cleanup
• High strength locking pin
• Controlled pin holes for easy height adjustments
• Turned post slide for easy quick adjustments

Specifications

• Safe Working Capacity: 10,000kg
• Maximum Height: 1190mm
• Minimum Height: 720mm
• Adjustable Pin Heights: 10
• Locking Pin Dia: 22mm
• Shaft Pin Hole Dia: 23mm
• Saddle Dimensions: 125x75mm (useable area)
• Base Dimensions: 406 x 556mm
• Nett Weight: 23.5kg
• Carton: 450 x 450 x 800mm
• Weight: 26.4kg

Intended Use

For professional heavy duty use on truck, agriculture, construction, mining, mobile home, oil field, automotive, and marine applications, where a lifted vehicle is to be supported before conducting servicing or repair work. Should be used in pairs.

NOTE: Sold individually but recommended to be used in pairs

IMPORTANT:   NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use jack stands.

The BORUM Industrial  10,000kg Heavy Duty Support Stand is a reinforced pin style stand with industrial quality design and support bracing system to sustain heavy loads up to 10,000kg. Adjusts to match the job with a 580mm minimum lift height and 780mm maximum lift height !!  Featuring Heavy-Duty Industrial design, these tough stands are ideal for construction, farm, truck, bus, earth moving equipment and fleet vehicle maintenance workshop use. Big wheeled and larger vehicles like trucks and earthmovers require a strong, stable and tall type of jack stand.

With its 10,000kg lift capacity (each stand), this is definitely a perfect fit in its class. Featuring a very stable 4 leg steel base system made with high-grade pipe steel, that provides plenty of stability and security. Large saddles with a flat top base are designed and a double ear support system, secure any large vehicle’s steel frame underneath and to give confidence that the vehicle load is very stable. Once the multiple pin post adjustment locks in, there’s no vehicle slipping even with the heaviest vehicle. The maximum adjustable height of 1190mm, ensures there are no cramped areas are hard to reach when using this high profile truck support stand.

Features

• Stable 4 legged stability
• Manufactured from high-grade steel and built to exacting standards for quality and durability
• Large saddle with double ear support system
• Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
• Paint is oil, grease and dirt-resistant for easy cleanup
• High strength locking pin
• Controlled pin holes for easy height adjustments
• Turned post slide for easy quick adjustments

Specifications

• Safe Working Capacity: 10,000kg
• Maximum Height: 780mm
• Minimum Height: 580mm
• Adjustable Pin Heights: 6
• Saddle Dimensions: 100 x 80mm
• Weight: 18kg

Intended Use

For professional heavy duty use on truck, agriculture, construction, mining, mobile home, oil field, automotive, and marine applications, where a lifted vehicle is to be supported before conducting servicing or repair work. Should be used in pairs.

NOTE: Sold individually but recommended to be used in pairs

IMPORTANT:   NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use jack stands.