Stainless Steel Lifting Systems - Inox
Showing all 16 results
-
Stainless Steel Lifting Systems - InoxPEWAG AWI Master Link
Doubles up as a dependable end link.- Dimensions are similar to DIN 5688-1
- Tested at 100 % of its load capacity
- Higher resistance to acids and caustics to standard loading rings
- Clearly identifiable by stamp, CE-mark is standard
- Particularly suited for use in water and wastewater applications
- Can also be used in connection with chemicals and food products, but with certain restrictions
(0 reviews) -
Stainless Steel Lifting Systems - InoxPEWAG CBHWI Bolts + Safety Bush
Because safety comes first.- Correspond to the design of CBHWI grade 5 and may therefore also be used as replacement parts
(0 reviews) -
Stainless Steel Lifting Systems - InoxPEWAG CWI Connex Connecting Link
For a seamless connection.- Guaranteed to be compatible with all pewag winner inox components of the same nominal size
- The suspension bolt is locked by a stainless steel coil spring (mat. 1.4462) with a synthetic leeve
- The bolt and the shell are available as spare parts
- Resistant to sea water and ideally suited for use in water and wastewater applications
- Can also be used in connection with chemicals and food products, but with certain restrictions
- Clearly identifiable by a stamp, the CE mark is standard
https://shop.pewag.com/au/cwi-connex-connecting-link/4017749
(0 reviews) -
Stainless Steel Lifting Systems - InoxPEWAG HSWI Eye Sling Hook
The new face of resilience.- The hook ensures the highest possible load capacity while maintaining a minimum product weight
- The hook provides impact for protection for the safety catch, a large hook mouth and an extra-wide hook point to prevent accidental hooking into the chain
- Also compatible with alternative connecting systems
- Forged inspection marks that facilitate the visual recognition of the discard criteria
- areas of application are (sea-)water and wastewater applications and the product can also be used in connection with chemicals and food products (restrictions will apply)
(0 reviews) -
Stainless Steel Lifting Systems - InoxPEWAG IDWOX Identification Tag
New look.- Made from corrosion-resistant material with corrosion-resistant quick-release fastener
- Resistant to acids, caustics and their vapours
(0 reviews) -
Stainless Steel Lifting Systems - InoxPEWAG LCWI Loop Connector
Stay in the loop.- With the loop connector, forming loops even through narrow eyes is easy, quick and does not require an additional connecting link.
- The loops will not tighten and, thanks to the special design, it is no longer necessary to reduce the load capacity down to 80 % when using a loop.
- The connector is stamped with the manufacturer’s symbol, CE-mark and batch number
(0 reviews) -
Stainless Steel Lifting Systems - InoxPEWAG PCWI Stainless Steel Pump Chains
All-round power packs.- Particularly suitable for submersible pumps and breathers in water and wastewater applications
- Serialised with a dedicated identification tag and test certificate
- Enlarged master links at the beginning, at segmented intervals and at the end of the chain make them ideally suited for step-by-step lowering, lifting or locking
- Option for customized Variations
https://shop.pewag.com/au/pcwi-stainless-steel-pump-chains/4092649
(0 reviews) -
Stainless Steel Lifting Systems - InoxPEWAG PWI Parallel Hook
- The special design of the chain support enables an optimal interaction between chain and hook.
- A reduction of the chain sling‘s load capacity is not necessary when shortening of chain legs to desired length is performed.
- The hook complies with EN 1677-1 with mechanical values for G6 and fulfils DIN5692 requirements.
(0 reviews) -
Stainless Steel Lifting Systems - InoxPEWAG SFGWI Safety Catch Set
Extra strength you can count on.- Extra-strong spring
- Rivetable safety pin
(0 reviews) -
Stainless Steel Lifting Systems - InoxPEWAG SPCWI Service Pump Chain
Use within the pump chain system.- When used with the LCWI, neither a special link nor a master link (AWI) is needed at the end of the pump chain system
- When cropping is required, segments can no longer be miscut (please note that this process may be performed by professionals only)
- In this system, the chain is guided over the usually wider pump handle and a loop is formed using the LCWI, eliminating the need for an oversized and expensive shackle
- With this pump chain system, a transition link is welded on at the end of the WOX-S chain leg
- In this way, the chain leg may be connected to the pump using an SSWI shackle
- The WLL tag is attached to the lower end and is undetachable
- For professional application WOX-S chain must be used
(0 reviews) -
Stainless Steel Lifting Systems - InoxPEWAG SSWI Safety Shackle
Withstands any vibrations.- Designed for use as an end fitting in chain and wire rope slings and in connection with pump chains for the lifting of submersible pumps and breathers
- Comes with a safety mechanism to protect against unintentional release
- SSWI Safety shackle easily withstands vibrations
- Preferred areas of application for the shackle are water and wastewater applications and the product can also be used in connection with chemicals and food products
(0 reviews) -
Stainless Steel Lifting Systems - InoxPEWAG VAWI Special Master Link Assembly for Wire Ropes
One for all.- Wide enough to fit two rope thimbles per transition link
- The manufacturing process of this corrosion-resistant, grade 6 master link assembly is similar to DIN 5688-1 and DIN 3088-1989
- Tested to 100 % of its maximum load capacity
- Clearly identifiable by stamp and CE-mark
- Preferred areas of application are water and wastewater applications
- Can be used in connection with chemicals and food products, but with certain restrictions
https://shop.pewag.com/au/vawi-special-master-link-assembly-for-wire-ropes/4014225
(0 reviews) -
Stainless Steel Lifting Systems - InoxPEWAG VLWI Chain Shortener
Safety is key.- Easy retrofitting in assembled system
- Shortened chain cannot fall out, as its proper weight will always keep it locked in place
(0 reviews) -
Stainless Steel Lifting Systems - InoxPEWAG VWI Master Link Assembly
Consistent performance.- Dimensions are similar to DIN 5688-1
- Tested at 100 % of its load capacity
- Higher resistance to acids and caustics than the standard four-leg chain slings
- Ideally suited for use in water and wastewater applications
- Can also be used in connection with chemicals and food products, but with certain restrictions
- Clearly identifiable by stamp and CE-mark
(0 reviews) -
Stainless Steel Lifting Systems - InoxPEWAG WOX Chain Inox
Clean, tidy and hard-working.- The chains are tested at 100 % of their load capacity, which is an impressive 12,000 kg!
- Higher resistance to acids and caustics than the standard lifting chains
- Guaranteed to be compatible with the Connex CWI links, with dimensions that are similar to DIN 5687-1 and EN 818-2
- Clearly identifiable by stamp
- Particularly suited for use in water and wastewater applications
- Can also be used in connection with chemicals and food products, but with certain restrictions
(0 reviews) -
Stainless Steel Lifting Systems - InoxPEWAG WOX-S Chain Inox
Simply smart.- Only be used in conjunction with specific lifting appliances
- Higher resistance to acids and caustic solutions
- Easy to identify thanks to the distinctive WOX-S marking
(0 reviews)