Eye Bolts & Eye Nuts
Showing all 12 results
-
Eye Bolts & Eye NutsAUSTLIFT Bolt on Tie Down Yoke
• Designed with spring, stop at any angle supplied without bolt
• Pivots 180° and allows side load lifting.
• Manufactured from forged alloy steel, quenched and tempered.
• Manufactured and tested in accordance with EN1677-1.
• Load rated parts are 100% magnaflux crack detected.
• Individual forged parts are traceable to Test Certification.
• Supplied without bolts; usage of Grade 10.9 or Grade 12.9 bolts is recommended.
• Proof tested to 2.5 times the WLL.
• All YOKE Lifting points meet or exceed all the requirements of ASME B30.26.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Eye Bolts & Eye NutsAUSTLIFT Classic Weld on Point Yoke
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Eye Bolts & Eye NutsAUSTLIFT Lifting Point with Key Yoke
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Eye Bolts & Eye NutsAUSTLIFT Oblong Eye Bolt
Swivel ring bolt accordingly to EN 818-4 for load ring and AS2318 for the swivel component. Used as a swiveling load ring capable of rotating under load due to ball bearing rings ideally suited for dynamic lifting in any position.
• Made from G80 alloy steel with orange painted finish, manufactured with an oval link, and available in metric thread sizes from 8mm to 36mm.
• Marked with working load limit in tonne, nominal size in millimetre, quality mark and supplier identification. Proof tested to 1.25 x Working load limit.
• Test certificates are available upon request.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Eye Bolts & Eye NutsAUSTLIFT Stubby Eye Bolt
Swivel Eye Bolt Points are accordingly to AS2318 for the swivel component.Used as a swiveling load ring able to swivel 360° with a pivot of 90°. Made from G100 alloy steel with Orange painted finish, manufactured with an elongated ring in metric thread sizes 8mm to 20mm.
• Marked with work load limit in tonne, nominal size in millimetre, quality mark and supplier identification.
• Designed by forged alloy steel, quenched and tempered.
• 360° rotation with 90° pivot function.
• Rated at 100% at 90° angle.
• 100% magnaflux crack detection.
• Proof tested in 2 stages.- 1.25 x working load limit with ball bearing included.
- Removal of ball bearing that is subject to damages, then 2x working load limit is applied.
• Test certificate available upon request.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Eye Bolts & Eye NutsAUSTLIFT Super Weld-On Point Yoke
• Load ring pivots 180°.
• Full Loading Capacity in all directions.
• Manufactured from forged alloy steel, quenched and tempered.
• Tested in accordance with EN1677-1.
• 100% magnaflux crack detected.
• Parts individually forged with batch code to ensure full traceability.
• The permitted WLL forged onto each product for quick and easy identification.
• Lugs designed to assist the welding process.
• A protected spring keeps the loading ring in the required position. The parts are connected in such a way that they remain captive. The spring also reduces noise caused by vibrations.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Eye Bolts & Eye NutsAUSTLIFT Swivel Lifting Point
Large ring bolt accordingly to EN 818-4 for load ring and AS2318 for the swivel component. Used as a swiveling load ring able to swivel 360° with a pivot of 180°. Made from G80 alloy steel with Orange painted finish, manufactured with an elongated ring in metric thread sizes.
Long Thread Available – Contact us for more information.
• Marked with work load limit in tonne, nominal size in millimetre, quality mark and supplier identification. Proof tested to 1.25 x working load limit.
• Test certificate available upon request(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Eye Bolts & Eye NutsAUSTLIFT Swivel Lifting Point Long Thread Yoke
- Rotates through 360° and pivot 90°.
- Manufactured from alloy steel, quenched and tempered.
- Manufactured and tested in accordance with EN1677-1.
- Load rated parts are 100% magnaflux crack detected.
- Individual forged parts and cap screw are traceable to Test Certification.
- Bolts are Metric thread (ASME / ANSI B18.3.1M).
- Proof tested to 2.5 times the WLL.
- Fatigue rated to 1.5 times the WLL.
- Meets or exceeds all the requirements of ASME B30.26.
- Quick and simple assembly, just a tapped hole is required.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Eye Bolts & Eye NutsAUSTLIFT Swivel Lifting Point Yoke
- Rotates through 360° and pivots 90°.
- Manufactured from alloy steel, quenched and tempered.
- Tested in accordance with EN1677-1.
- Certified by DGUV GS-OA 15-04.
- Load rated parts are 100% magnaflux crack detected.
- Individual forged parts and cap screw are traceable to Test Certification.
- Bolts are Metric thread.
- Proof tested to 2.5 times the WLL.
- Fatigue rated to 20,000 cycles at 1.5 times the WLL.
- Meets or exceeds all the requirements of ASME B30.26.
- Quick and simple assembly, just a tapped hole is required
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Eye Bolts & Eye NutsAUSTLIFT Weld On Ring Yoke
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Eye Bolts & Eye NutsAUSTLIFT Eye Bolt DIN580 Zinc
Eye bolts DIN580 are generally used as a removable lifting point where a rated female thread or nut can be utilised also can be used as a termination for chain, wire rope and other assembles where required.
Various sizes available
• Made from C15 carbon steel with zinc plated finish, manufactured with a standard larger eye. Only available in metric thread sizes.
• Conforms to DIN580 and DIN582 marked with working load limit in tonne, nominal size in millimetre, quality grade, batch numbered and supplier identification.
• Proof tested to 2 x working load limit and minimum breaking force of 6 x working load limit.
• Test certificates are available upon request.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Eye Bolts & Eye NutsAUSTLIFT Eye Nut DIN582 Zinc
Eye Nut DIN 582 are generally used as a removable lifting point where a rated nut can be utilised. Also can be used as a termination for chain, wire rope and other assemblies where required.
Various sizes available
• Made from C15 carbon steel with zinc plated finish,manufactured with a standard larger eye. Only availablein metric thread sizes.
• Conforms to DIN 582, marked with working load limit in tonne, nominal size in millimetre, quality grade, batch numbered and supplier identification.
• Proof tested to 2 x working load limit and minimum breaking force of 6 x working load limit.
• Test certificates are available upon request.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page