Trade Specific Supplies
Showing 865–900 of 2922 results
-
Welding CarriagesITM Mini Spider Welding Carriage
Features
The Mini Spider is a battery-powered welding tractor designed to produce continuous fillet welds using MIG/MAG torches. The torch can be easily swapped from one side of Mini Spider to another.- 4-wheel drive system with magnetic traction and a feedback loop provides highly efficient speed stabilization.
- Constant, continuous and repeatable travel speed enables weld bead geometry that is exact to the required specifications, thus reducing costly over welding and substantially decreasing filler metal usage.
- Compact and lightweight design to weld in narrow spaces
- Convenient 18 V DC battery supply* (the same battery for both Mini Spider and Gecko Battery) with an optional power supply that can be used to plug the carriage into a 110″”240 V power source.
- Torch placement on left or right side
- Welding edge to edge
- Closed-loop speed control system based on electric motor with encoder “” ensures increased speed accuracy
- Consistent heat input reduces distortion
- Reduces wasted filler metal “” eliminates over welding
- Digital LED display for presetting of travel speed and diagnostic messages
- Low-battery indicator
- Built-in guide rollers
*Charger sold seperately
Specifications
- Voltage: 18 V DC, 5.2 Ah | 1~ 110″”240 V, 50″”60 Hz (option)
- Power: 25 W
- 200mm Minimum working width
- Welding position (according to EN ISO 6947 and AWS/ASME):
- PB / 2F
- PD / 4F
- Torch diameter: 16″”22 mm (0.63″”0.87″)
- Min. workpiece thickness: 4 mm (0.16″)
- Ground clearance: 4 mm (0.16″)
- Horizontal pulling force: 150 N
- Vertical pulling force: 100 N
- Horizontal speed **: 0″”110 cm/min (0″”43.3 in/min)
- Vertical speed **: 0″”100 cm/min (0″”39.4 in/min)
- Weight (w/o battery): 7.6 kg (22 lbs)
(0 reviews) -
Power ToolsITM Pedestal Floor Drill Press
Quality casting, construction & componentry.
Emergency stop.
NVR safety switch.Each Unit Supplied With:.
Chuck safety guard.
Drill chuck & arbor.
Drill drift (on MT models)Drilling Capacity (mm): 20mm (3/4″)
Spindle Taper: #3MT
Chuck: 5-20mm B22
Motor Power: 750W 240V
Spindle Travel (mm): 85
Speed: 12 Speed 280-2380
Swing (mm): 360
Table Size / Base Size (mm): 290×290 / 460×272
Column Diameter (mm): 80
T-Slot Size: 16mm
Height (mm): 1600
N.W. / G.W. (kg): 64 / 68Drill press vice to suit: VDP102 or VDP150
Cross slide vice to suit: TM130-100(0 reviews) -
1" Impact SocketsITM Pin & Ring Set
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Automotive Lifting & WorkshopITM Porta Power Body Repair Kit Hydraulic
ITM Porta Power body repair kits are perfect for auto body, frame repair and construction jobs. Manufactured with a snap lock design for fast, easy assembly and long handles for low pumping effort, they come standard with an automatic pump overload system and a range of accessories to suit many different applications
- Quality heavy duty steel construction
- Perfect for auto body, frame repair and construction jobs
- Snap lock design for fast and easy assembly
- Heavy duty hydraulics for long life and durability
- 13pce accessory kit
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
GeneralITM Pro 10 Pipe Bevelling Machine
The ITM PRO 10 PB is a European made I.D. mounted portable pipe bevelling machine. Although it is a large capacity heavy duty machine, it can be used efficiently by a single operator, weighing in at a total of just 31.5kg.
The self-centring expandable mandrels provide quick and correct alignment to pipe.
The PRO 10 PB can simultaneously perform 3 of the following operations “” internal bevel, external bevel, J-groove bevel, face off, I.D. chamfer and counterbore. Whilst the machine can be operated with just 1 cutting insert, optimal results are achieved by using 3 cutting inserts at once.
The PRO10PBE is powered by a high torque electric motor while the PRO10PBA is powered by a pneumatic motor.Package Includes:
- PRO 10 PB Bevelling Machine
- Electric or Pneumatic motor
- Mandrel for pipe 84mm I.D. to 269mm I.D.
- Jaw block set no. 1 to 6
- Toolbox & tools
- Coolant bottle
Motor: Pneumatic Motor 1.5kw
Power Requirements: 1750 l/min at 630 kPa
Spindle Speed: 20rpm
Weight: (with standard mandrel) 32.0kgMotor: Electric Motor 1.8kw
Power Requirements: 230V/50Hz
Spindle Speed: 2 Speed Gearbox With Electronic Variable Speed 12 – 28; 41 – 96rpm
Weight: (with standard mandrel) 36.0kg(0 reviews) -
GeneralITM Pro 2 Pipe Bevelling Machine
PRO 2 PB is a compact, handy pipe beveller that mills pipes made of carbon and stainless steel, aluminium alloys, and copper-nickels. As standard, it can face and bevel pipes from inner diameters (ID) of 22mm (0.87″) to outer diameters (OD) of 48mm (1.89″)
(0 reviews) -
GeneralITM Pro 40 PBS Stationary Pipe Bevelling Machine
High-speed rotary milling head with replaceable inserts. Heavy duty milling head offers accurate bevels in a fraction of the time compared to traditional single point machining. Bevel widths up to 45mm and angles between 0° and 60°. Internal bevelling and J-groove end preparation is an available option. An optional Oval Pipe attachment is available for bevelling of pipe which is not truly round.
Power supply: Single Phase 240V
External pipe diameter range: 200-1000mm Pipe Longer Than 830mm;
200-600mm Pipes Of 400-830mm Length
Maximum pipe weight: 6 000kg With Standard Plastic Rollers On Active Support
10 000kg With Optional Steel Rollers On Active Support
Min. pipe thickness: 5mm
Pipe fixing: Mechanical With Chain
Feed rate: 100 – 1100 mm/min
Bevelling angle range: 0° – 60° With Continuous Angle Adjustment
Max OD bevel width: 45mm
Max ID bevel width: 5mm Standard, Up To 20mm – Optional
Bevelling type “œJ”: YES – Optional
“œJ” type bevelling radius: 6mm or 8mm
Overall Dimensions (with a 1.4m x 1m dia. pipe): 2372mm L x 1507mm W x 1993mm H
Weight: 1100kg(0 reviews) -
GeneralITM Pro 5 Pipe Bevelling Machine
The ITM PRO 5 PB is a European made I.D. mounted pipe bevelling machine, designed for portable use by a single operator. The self-centring expandable mandrel provides quick and correct alignment to pipe or tube prior to machining operations.
The Pro 5 PB is able to simultaneously perform 3 of the following operations:
External bevel, internal bevel, face off, I.D. chamfer, J-groove bevel, and counterbore.Use any tool bit from ID 25 mm up to OD 140 mm, provided that PRO5PB is equipped with just 1 tool bit either for facing-off or for beveling “” no mater short or long.
Pipe machining range:
32mm I.D. minimum pipe capacity
114mm O.D. maximum pipe capacity
25mm I.D. minimum pipe capacity with optional small mandrel
140mm O.D. maximum pipe capacity with optional 140mm spindle disk set
12mm maximum wall thicknessPackage Includes:
- PRO 5 PB Bevelling Machine with Electric or Pneumatic Motor
- Mandrel 32mm I.D. to 107mm I.D
- 118mm spindle disc
- 3 x set of jaw blocks (1,2,3,4,5,6)
- Set of tools
- Coolant container
- Operator’s manual
Motor: Pneumatic Motor 800W
Rotational Speed: 90rpm
Air Consumption: 1600 l/min (49.4CFM)
Weight: (incl. PRO5PB) 10kg(0 reviews) -
Automotive Lifting & WorkshopITM Ratchet Jack Stand Pair
ITM ratcheting jack stands are ideal for any home garage or professional workshop and are designed to comply with the Australian Mandatory Standard AS 2538:2016. Constructed from heavy duty steel, strength and durability is guaranteed and the ratchet designs makes the job quicker and easier for the working professional
Quick and easy ratcheting height adjustment Double locking safety feature Large foot base for stability Suited for use in the professional trade workshop Deep saddle for increased coverage and grip under vehicles Reinforced shaft for added strength stability Complies with mandatory Australian standard: AS 2538:2016
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
GeneralITM SBM 500 Bevelling Machine
Stationary beveller for machining straight edges of different size workpieces. Modern design, numbers of advanced control systems and innovative solutions streamlines workflow to maximize your production efficiency.
- Edge bevelling
- Ergonomic ball roller bench
- Swarf drawer
- Supplementary tables to accommodate long workpieces
- Pipe beveling attachment for pipes 50-150 mm (2-6″) OD
- 3D contact wheel control ensures proper workpiece alignment in relation to milling head
- Very high surface quality
- High speed rotary milling head equipped with 10 inserts
- Cutting inserts dedicated to various materials
- No heat affected zones or distortion of the workpiece
- Easy access to milling head and cutting inserts
- Precise setting of bevel angle from 15 up to 60 degrees and bevel width up to 30 mm
- Continuous adjustment of spindle speed and feed rate make it suitable for different types of steel and aluminum
Voltage: 3~ 400 VAC + N+PE, 50/60 Hz
Power: 7500 W
Spindle speed (no load): 500 – 2920 rpm
Feed rate: up to 3.3 m/min
Bevel angle range: 15 – 60° with continuous angle adjustment
Bevel width: up to 30 mm
Workpiece height: from 3 mm up to 100 mm Edge Beveling
Min. workpiece width: 50 mm
Min. workpiece length: 150 mm
Pipe OD beveling: from 50 mm up to 150 mm (option)
Weight: 850 kg(0 reviews) -
Automotive Lifting & WorkshopITM Transmission Jack Vertical 500kg
Features
ITM engine stands, cranes and transmission jacks are the perfect work mate for the professional automotive workshop. Designed to assist in lifting and supporting of transmission gearboxes in the workshop, you can easily adjust the height to accomodate different vehicles and the simple foot operated pump adjusts the working height to wear you need it. The compact design and space saving top saddle allow for safer lifting and is equipped with caster wheels for easy positioning.- Heavy duty construction
- Universal fit to most transmission/transfer cases
- Hydraulic foot pedal lift
- Caster wheels for easy positioning
Specifications
- Working Load Limit: 500kg
- Height Lowered: 1140mm
- Height Raised: 1950mm
- Net Weight: 24kg
(0 reviews) -
Tyre Inflator ToolsITM Tyre Inflator Gun
High quality construction with annodized alloy body
Eas to read dial type gauge with impact resistant rubber cover
40cm High flex hard wearing rubber hoseReadouts: BAR, PSI, KPA & KG/CM2
Range: 0 to 220 PSI
Inlet: 1/4″ BSP Inlet(0 reviews)
