Industrial Equipment & Supplies

The Holemaker Pro 65 is designed to deliver exceptional value for money and return on investment, for both the machine and annular cutters. Every aspect of this machine has been designed to give zero lateral movement of the Annular Cutter, and constant RPM, meaning this machine will give massively increased cutter life – A very important factor for any high volume steel fabrication workshop.

• European made machine
• New 1600 watt Italian motor
• Dual rail slide system increases machine rigidity and cutter life
• Through cutter coolant system
• Feed handles can be placed on both sides
• Supplied in a blow mould carry case

• Capacity ( Diameter ): 65mm
• Capacity ( Depth ): 75mm
• 3/4″ Weldon shank tool holder
• 1600 Watt 240V Motor
• 2 Speed gearbox (160 / 390rpm)
• Lightweight, only 17kg
• 11000Nm Magnetic dead lift on 25mm steel plate
• 95mm Stroke
• Height 418mm min / 513mm max

The Holemaker PRO 75 is a versatile, multi-purpose machine, equipped with a No. 3 Morse Taper spindle. The 2 speed gearbox with electronic variable speed, Electronic Speed Stabilization System (ESSS), and motor soft start feature makes this machine ideal for tapping up to M24. With a large cutting capacity of 75mm diameter and 110mm depth using Holemaker cutters, this machine will suffice for most holemaking requirements. Other standard features include gravity feed coolant system & left or right hand feed handle operation. The unique semi-automatic gib adjustment system enables simple, fast and always correct fine tuning without any expert knowledge or experience.

Supplied complete with arbor for use with Holemaker cutters up to 75mm depth of cut (3/4″ shank). Optional arbor to take Holemaker cutters up to 110mm depth of cut (1-1/2″ shanks) is also available.

Capacity ( Diameter ): 75mm
Capacity ( Depth ): 110mm
Capacity ( Twist Drill ): #3 Morse Taper 32mm
Motor Power: 1650 watt
Input Power: 1800 watt Single Phase 240V
Gearbox: 2 Speed Gearbox With Electronic Variable Speed And Motor Soft Start Feature 80-160; 210-420rpm
Weight: 27.0kg
Magnetic Dead Lift: 19500Nm On 25mm Steel Plate
Stroke: 214mm
Height: 525mm min / 739mm max
Through Spindle Coolant System
Smart Magnet Technology To Ensure Sufficient Magnetic Adhesion
Supplied In Metal Carry Case With Cutter Guard & Safety Strap

The Holemaker PRO 80 is an extra heavy duty mid-sized machine capable of producing burr-free holes up to 80mm diameter by 110mm depth. The 1500w motor with 2-speed mechanical gearbox produces superb torque through gear reduction in low speeds. No. 3 Morse Taper spindle bore for use with taper shank drills, tapping head (M30 Capacity) and taper shank reamers.

Supplied complete with side mounted coolant system and arbor for use with ¾” shank Holemaker cutters up to 75mm diameter and 75mm depth of cut. Optional arbor to take 1-1/4″ shank cutters up to 80mm diameter and 110mm depth.

• Lightweight for a large capacity machine, only 18kg
• Rigid casting designed to withstand firm downward drilling force, prolonging the machine and tooling life
• New generation Italian made motor and heavy-duty 2 speed gearbox
• Semi-automatic gib adjustment enables simple, fast, correct, and repeatable slide backlash settings without any expert knowledge or experience
• Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials
• Magnetic Power Adhesion Control (MPAC) detects the adhesive force of the electromagnetic base and protects both the machine and the operator from working on too thin workpiece

• Capacity (Diameter): 80mm
• Capacity (Depth): 110mm
• Capacity (Twist Drills): 25mm
• Spindle Taper: MT3
• Motor Power: 1500 Watt 240V Motor
• Input Power: 1600 Watt
• Speed: 2 speed heavy-duty gearbox 160/390rpm
• Weight: 18kg
• Magnetic Dead Lift: 11,000 N on 25mm steel plate
• Stroke: 190mm
• Height (Min./Max.): 476mm/666mm

The Holemaker Special 110 is a highly versatile European made machine for professional drilling and tapping applications, featuring the latest innovations in drilling machine technology. The machine’s forward & reverse work modes with variable speed adjustment allows thread cutting up to M30 of through holes and M30 blind holes.

Features

• New generation Italian made motor
• Intelligent speed control system maintains stable speed regardless of load changes
• Electronic variable speed control
• Electronic clutch
• Overload and overheat protection
• Tilt sensor stops the motor in cases of machines break away
• 360-degree visual monitoring system indicates current condition of the drill and gives safety and diagnostic information e.g. worn brushes
• Intuitive control panel at top of the drill
• Very light weight
• Supplied in a metal carry case with cutter guard & safety strap

* Tapping applications require optional tapping head and collets

• Capacity ( Diameter ): 120mm
• Capacity ( Depth ) : 110mm
• Twist drill capacity: 32mm
• Tap capacity: M30
• #3 Morse Taper spindle
• 2150 Watt 240V motor
• 4 Speed variable gearbox (75-110 / 135-200 / 220-320 / 390-570rpm)
• Lightweight, only 25kg
• 18,000Nm Magnetic dead lift on 25mm steel plate
• 225mm Stroke
• Height 597mm min / 822mm max

The Holemaker Special 60 is a highly versatile European made machine for professional drilling and tapping applications, featuring the latest innovations in drilling machine technology. The machine’s forward & reverse work modes with variable speed adjustment allows thread cutting up to M20 of through holes and blind holes.

Features

• New generation Italian made motor
• Intelligent speed control system maintains stable speed regardless of load changes
• Electronic Variable Speed Control
• Electronic clutch
• Overload and Overheat protection
• Tilt sensor stops the motor in cases of machines break away
• 360-degree visual monitoring system indicates current condition of the drill and gives safety and diagnostic information e.g. worn brushes
• Intuitive control panel at top of the drill
• Very light weight
• Supplied in a durable blow mould carry case with cutter guard & safety strap

* Tapping applications require optional tapping head and collets

• Capacity ( Diameter ): 60mm
• Capacity ( Depth ): 75mm
• Twist drill capacity: 23mm
• Tap capacity: M20
• #2 Morse Taper spindle
• 1500 Watt 240V motor
• 2 Speed variable gearbox (160-250 / 390-580rpm)
• Lightweight, only 17kg
• 11000Nm Magnetic dead lift on 25mm steel plate
• 190mm Stroke
• Height 500mm min / 690mm max

The Holemaker Special 80 is a highly versatile European made machine for professional drilling and tapping applications, featuring the latest innovations in drilling machine technology. The machine’s forward & reverse work modes with variable speed adjustment allows thread cutting up to M24 of through holes and blind holes.

Features

• New generation Italian made motor
• Intelligent speed control system maintains stable speed regardless of load changes
• Electronic Variable Speed Control
• Electronic clutch
• Overload and Overheat protection
• Tilt sensor stops the motor in cases of machines break away
• 360-degree visual monitoring system indicates current condition of the drill and gives safety and diagnostic information e.g. worn brushes
• Intuitive control panel at top of the drill
• Very light weight
• Supplied in a durable blow mould carry case with cutter guard & safety strap

* Tapping applications require optional tapping head and collets

• Capacity ( Diameter ): 80mm
• Capacity ( Depth ): 110mm
• Twist drill capacity: 25mm
• Tap capacity: M24
• #3 Morse Taper spindle
• Input power: 1600 Watt Single Phase 240V
• Motor Power: 1500 Watt
• 2 Speed variable gearbox (120-190 / 290-450rpm)
• Lightweight, only 18kg
• 11000Nm Magnetic dead lift on 25mm steel plate
• 190mm Stroke
• Height 554mm min / 744mm max

Supplied with arbor for use with 3/4″ shank Holemaker cutters up to 75mm diameter and 75mm depth of cut. Optional arbor for 1-1/4″ shank cutters up to 80mm diameter and 110mm depth.

The TAP 50 is a portable magnetic drilling machine with 200mm diameter drilling and M52 tapping capacity (with optional tapping head) TAP 50 has a 3.0kW single phase 240V motor. The spindle bore is No.5 Morse Taper. The TAP 50 is designed for special and challenging applications that no other portable magnetic drill has been able to solve before.

Feed handles can be placed on the left or right sides of the machine.
Reversible.
Heavy duty dual rail slides provide rigidity and quick movement

Capacity (Diameter): 200mm
Capacity (Depth): 250mm
Capacity (Tapping): 52mm
Capacity (Twist Drill): 52mm
Motor Power: 2850 watt
Input Power: Single Phase 240V
Gearbox: 4 Speed Gearbox with electronic Hi/Low – 40/60. 90/130, 170/240, 380/545RPM
Weight: 52.0kg
Stroke: 330mm
Height (min/max): 730mm / 955mm