Industrial Equipment & Supplies
Showing 13285–13320 of 13869 results
-
Bottle JacksTQB BRANDS Bottle Jack Air/Hydraulic 20,000kg
This TQ Pro “Latest Applied Technologies” 20,000kg Air/Hydraulic Bottle Jack is constructed of superior grade steel and built to premium standards for quality and durability. The superior-quality, large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load. A built-in bypass device protects the hydraulic system from over-pumping damage. The sturdy and stable design features a welded base and cylinder to assure strength and eliminate leaks.
Fitted with a safety overload valve for extra protection, the safety valve is installed between the pump and high-pressure check valve in the barrel/lift ram assembly. When attempting to raise a load greater than the jack’s capacity, the safety valve opens on each pump stroke and diverts any further oil back to the reservoir thus preventing the raising of the load.
Features
- Using CNC technology, the frame is constructed using superior-grade steel and built to premium TQ Pro standards for professional quality and durability
- Premium quality large diameter hydraulic steel cylinder with precision tolerances
- Piston-ram is treated and polished to minimise wear and extend service life
- High capability premium quality seal system efficiently protects internal hydraulics keeping it free from contaminants
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting premium finish
- Paint is oil, grease and dirt-resistant for easy cleanup
- Thick Base Design
The thick base design is to provide the firmest footprint reducing flex. This substantially increases the life of the hydraulic ram under the toughest lifting and lowering circumstances.
Welded Reservoir
A welded reservoir instead of the screw base results in a substantial increase in durability. With the completely sealed hydraulic system, wear and tear and internal contamination is dramatically reduced.
Specifications
- Safe Working Capacity: 20,000kg
- Maximum Height: 525mm
- Minimum Height: 261.5
- Hydraulic Lift: 156mm
- Adjustable Lift: 95mm
- Operating Air Pressure: 110-125psiAir Inlet Fitting: 1/4″
- Base Dimensions: 230 x 150 x 30mm
- Carton: 270 x 240 x 290mm
- Nett Weight: 19kg
- Gross Weight: 22kg
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use support stands.
Intended Use
For professional specialist use on truck, agriculture, construction, mining, mobile home, oil field, automotive, and marine applications where lifting is required.
(0 reviews) -
Bottle JacksTQB BRANDS Bottle Jack Air/Hydraulic 30,000kg
This TQ Pro “Latest Applied Technologies” 30,000kg Air/Hydraulic Bottle Jack is constructed of superior grade steel and built to premium standards for quality and durability. The premium-quality, large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load. A built-in bypass device protects the hydraulic system from over-pumping damage. The sturdy and stable design features a welded base and cylinder to assure strength and eliminate leaks.
Fitted with a safety overload valve for extra protection, the safety valve is installed between the pump and high-pressure check valve in the barrel/lift ram assembly. When attempting to raise a load greater than the jack’s capacity, the safety valve opens on each pump stroke and diverts any further oil back to the reservoir thus preventing the raising of the load.
Features
- Using CNC technology, the frame is constructed using superior-grade steel and built to premium TQ Pro standards for professional quality and durability
- Premium quality large diameter hydraulic steel cylinder with precision tolerances
- Piston-ram is treated and polished to minimise wear and extend service life
- High capability premium quality seal system efficiently protects internal hydraulics keeping it free from contaminants
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting premium finish
- Paint is oil, grease and dirt-resistant for easy cleanup
Thick Base Design
The thick base design is to provide the firmest footprint reducing flex. This substantially increases the life of the hydraulic ram under the toughest lifting and lowering circumstances.
Welded Reservoir
A welded reservoir instead of the screw base results in a substantial increase in durability. With the completely sealed hydraulic system, wear and tear and internal contamination is dramatically reduced.
Specifications
- Safe Working Capacity: 30,000kg
- Maximum Height: 533mm
- Minimum Height: 279.5mm
- Hydraulic Lift: 155mm
- Adjustable Screw Height: 95mm
- Operating Air Pressure: 110-125psi
- Air Inlet Fitting: 1/4″
- Base Dimensions: 250 x 180 x 40mm
- Carton: 270 x 240 x 290mm
- Nett Weight: 29kg
- Gross Weight: 29.5kg
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use support stands.
Intended Use
For professional specialist use on truck, agriculture, construction, mining, mobile home, oil field, automotive, and marine applications where lifting is required.
(0 reviews) -
Bottle JacksTQB BRANDS Bottle Jack Air/Hydraulic 35,000kg
This powerful heavy duty 35,000kg Borum Industrial Air/Hydraulic Bottle Jack packs a big punch, providing enough lifting power for use with farm vehicles, heavy-duty machinery, industrial construction equipment and more. The 2 piece removable handle is long enough to lift the load with ease and also helps to position the jack. Use this workhorse with a 110-125psi rated air pressure supply to lighten the load and provide the fast, strong lifting power you need, or operate it manually for normal operation just about anywhere.
Our Borum Industrial Quality Air/Manual Bottle Jacks are designed to operate either manually or pneumatically. The manual function allows for normal operation anywhere, even without an air supply.
Fitted with a safety overload valve for extra protection, the safety valve is installed between the pump and high-pressure check valve in the barrel/lift ram assembly. When attempting to raise a load greater than the jack’s capacity, the safety valve opens on each pump stroke and diverts any further oil back to the reservoir thus preventing the raising of the load.
(Previous models include product code/s; 35TABJ)
Features:
- Manufactured of superior-grade steel to exacting standards for quality and durability
- Industrial quality hydraulic cylinder unit operates at lower oil pressure to raise load, reduce wear and extend service life
- Precision machined, chrome plated and polished piston-ram
- CNC machined ports and threads
- Built-in hydraulic by-pass protection against over pumping damage
- Versatile “quick connector” design for easy removal of air hose for compact storage or remote operation
- Compact yet powerful Industrial Quality Air Turbo Motor
- Lead-free paint is applied to ensure a long-lasting finish and prevent corrosion
- Paint finish is oil, grease and dirt-resistant for easy cleanup
Specifications:
- Safe Working Capacity: 35,000kg
- Minimum Height: 264mm
- Maximum Height: 414mm
- Hydraulic Stroke: 150mm
- Base Area: 210x280mm
- Operating Air Pressure: 110-125psi
- Air Inlet Fitting: 1/4″ x 18NPT
- Nett Weight: 29kg
- Carton: 265 x 230 x 300mm
- Gross Weight: 30kg
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use support stands.
Intended Use
For professional heavy duty use on truck, agriculture, construction, mining, automotive, and marine applications where lifting and lowering is required.
(0 reviews) -
Bottle JacksTQB BRANDS Bottle Jack Air/Manual 20,000kg
This heavy duty 20,000kg eQuipt Air/Manual Bottle Jack packs a big punch, providing enough lifting power for use with farm vehicles, heavy-duty machinery, industrial construction equipment and more. The 2 piece removable handle is long enough to lift the load with ease and also helps to position the jack. Use this workhorse with a 110-125psi rated air pressure supply to lighten the load and provide the fast, strong lifting power you need, or operate it manually for normal operation just about anywhere.
Our eQuipt Air/Manual Bottle Jacks are designed to operate either manually or pneumatically. The manual function allows for normal operation anywhere, even without an air supply.
Fitted with a safety overload valve for extra protection, the safety valve is installed between the pump and high-pressure check valve in the barrel/lift ram assembly. When attempting to raise a load greater than the jack’s capacity, the safety valve opens on each pump stroke and diverts any further oil back to the reservoir thus preventing the raising of the load.
Features:
- Manufactured of superior-grade steel to exacting standards for quality and durability
- Industrial quality hydraulic cylinder unit operates at lower oil pressure to raise load, reduce wear and extend service life
- Precision machined, chrome plated and polished piston-ram
- CNC machined ports and threads
- Built-in hydraulic by-pass protection against over pumping damage
- Versatile “quick connector” design for easy removal of air hose for compact storage or remote operation
- Compact yet powerful Industrial Quality Air Turbo Motor
- Lead-free paint is applied to ensure a long-lasting finish and prevent corrosion
- Paint finish is oil, grease and dirt-resistant for easy cleanup
Specifications:
- Safe Working Capacity: 20,000kg
- Minimum Height: 262mm
- Maximum Height: 504mm
- Hydraulic Stroke: 163mm
- Adjustable Screw: 79mm
- Operating Air Pressure: 110-125psi
- Air Inlet Fitting: 1/4″ x 18NPT
- Nett Weight: 16kg
- Carton: 275 x 190 x 290mm
- Gross Weight: 17kg
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use support stands.
Intended Use
For professional heavy duty use on truck, agriculture, construction, mining, automotive, and marine applications where lifting and lowering is required.
(0 reviews) -
Bottle JacksTQB BRANDS Bottle Jack Air/Manual 20,000kg
This heavy duty 20,000kg Borum Industrial Air/Manual Bottle Jack packs a big punch, providing enough lifting power for use with farm vehicles, heavy-duty machinery, industrial construction equipment and more. The 2 piece removable handle is long enough to lift the load with ease and also helps to position the jack. Use this workhorse with a 110-125psi rated air pressure supply to lighten the load and provide the fast, strong lifting power you need, or operate it manually for normal operation just about anywhere.
Our Borum Industrial Quality Air/Manual Bottle Jacks are designed to operate either manually or pneumatically. The manual function allows for normal operation anywhere, even without an air supply.
Fitted with a safety overload valve for extra protection, the safety valve is installed between the pump and high-pressure check valve in the barrel/lift ram assembly. When attempting to raise a load greater than the jack’s capacity, the safety valve opens on each pump stroke and diverts any further oil back to the reservoir thus preventing the raising of the load.
Features:
- Manufactured of superior-grade steel to exacting standards for quality and durability
- Industrial quality hydraulic cylinder unit operates at lower oil pressure to raise load, reduce wear and extend service life
- Precision machined, chrome plated and polished piston-ram
- CNC machined ports and threads
- Built-in hydraulic by-pass protection against over pumping damage
- Versatile “quick connector” design for easy removal of air hose for compact storage or remote operation
- Compact yet powerful Industrial Quality Air Turbo Motor
- Lead-free paint is applied to ensure a long-lasting finish and prevent corrosion
- Paint finish is oil, grease and dirt-resistant for easy cleanup
Specifications:
- Safe Working Capacity: 20,000kg
- Minimum Height: 262mm
- Maximum Height: 504mm
- Hydraulic Stroke: 163mm
- Adjustable Screw: 79mm
- Operating Air Pressure: 110-125psi
- Air Inlet Fitting: 1/4″ x 18NPT
- Nett Weight: 16kg
- Carton: 275 x 190 x 290mm
- Gross Weight: 17kg
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use support stands.
Intended Use
For professional heavy duty use on truck, agriculture, construction, mining, automotive, and marine applications where lifting and lowering is required.
(0 reviews) -
Bottle JacksTQB BRANDS Bottle Jack Squat 12,000kg
This powerful, heavy-duty TradeQuip “Made for the Trade” Hydraulic Bottle Jack with high quality glide-action pressure pump is designed for hard-hitting commercial use, making large loads easy to lift. The lightweight jack is ideal for lifting farm vehicles, heavy-duty machinery, industrial construction equipment and more. Professional quality, ideal for the workshop or panel shop. Fitted with unique overload protection system and large stable base. Supplied with 500mm pump handle. The low profile design of this hydraulic jack fits underneath tight spots. The jack drops down to just 180mm at its lowest point, making it ideal for use in automotive and ag repair shops, and other small spaces.
Attain the proper work height with the 85mm hydraulic lift range, and then do some fine tuning to get load exactly where you want it. The knurled heat-treated pad with 70mm screw adjustment offers the versatility you need. A convenient steel carrying handle makes it easy to transport the jack to any location. The stubby bottle jack is the perfect choice for everyday vertical lifting in a variety of environments. A lead-free paint finish covers the surface to ensure long-lasting wear and to help prevent rust. The paint is oil-, grease- and dirt-resistant for easy cleanup no matter how often you put this jack to work.
Fitted with a safety overload valve for extra protection, the safety valve is installed between the pump and high-pressure check valve in the barrel/lift ram assembly. When attempting to raise a load greater than the jack’s capacity, the safety valve opens on each pump stroke and diverts any further oil back to the reservoir thus preventing the raising of the load.
Features:
- Machined and polished cylinders with die-cut threads provide non-abrasive leak-free, durable performance
- Fabricated from hard-cast steel with heat-treated critical stress areas
- Unique cross-type forged release valve assures positive load control
- Overload protection
- Convenient welded carry handle
- Paint is oil, grease and dirt-resistant for easy cleanup
Specifications:
- Safe Working Capacity: 12,000kg
- Hydraulic Lift: 85mm
- Adjustable Screw Height: 55mm
- Minimum Height: 175mm
- Maximum Height: 315mm
- Base Area: 157 x 134mm
- Handle: 500 x 20mm
- Carton: 148 x 142 x 190mm (plus handle)
- Gross Weight: 7kg
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use support stands.
Intended Use
For heavy duty use on truck, agriculture, construction, mining, automotive, and marine applications where lifting and lowering is required.
(0 reviews) -
Bottle JacksTQB BRANDS Bottle Jack Squat 20,000kg
This powerful, heavy-duty TradeQuip “Made for the Trade” Hydraulic Bottle Jack with high quality glide-action pressure pump is designed for hard-hitting commercial use, making large loads easy to lift. The lightweight jack is ideal for lifting farm vehicles, heavy-duty machinery, industrial construction equipment and more. Professional quality, ideal for the workshop or panel shop. Fitted with unique overload protection system and large stable base. Supplied with 500mm pump handle. The low profile design of this hydraulic jack fits underneath tight spots. The jack drops down to just 200mm at its lowest point, making it ideal for use in automotive and ag repair shops, and other small spaces.
Attain the proper work height with the 110mm hydraulic lift range, and then do some fine tuning to get your load exactly where you want it — the knurled heat-treated pad with 75mm screw adjustment offers the versatility you need. A convenient steel carrying handle makes it easy to transport the jack to any location. The stubby bottle jack is the perfect choice for everyday vertical lifting in a variety of environments. A lead-free paint finish covers the surface to ensure long-lasting wear and to help prevent rust. The paint is oil-, grease- and dirt-resistant for easy cleanup no matter how often you put this jack to work.
Fitted with a safety overload valve for extra protection, the safety valve is installed between the pump and high-pressure check valve in the barrel/lift ram assembly. When attempting to raise a load greater than the jack’s capacity, the safety valve opens on each pump stroke and diverts any further oil back to the reservoir thus preventing the raising of the load.
Features:
- Machined and polished cylinders with die-cut threads provide non-abrasive leak-free, durable performance
- Fabricated from hard-cast steel with heat-treated critical stress areas
- Unique cross-type forged release valve assures positive load control
- Overload protection
- Convenient welded carry handle
Specifications
- Safe Working Capacity: 20,000kg
- Hydraulic Lift: 110mm
- Adjustable Screw Height: 60mm
- Minimum Height: 200mm
- Maximum height: 370mm
- Base Area: 167 x 156mm
- Handle: 500 x 20mm
- Carton: 180 x 165 x 210mm (plus handle)
- Gross Weight: 10kg
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use support stands.
Intended Use
For heavy duty use on truck, agriculture, construction, mining, automotive, and marine applications where lifting and lowering is required.
(0 reviews) -
Bottle JacksTQB BRANDS Bottle Jack Squat Air/Hydraulic 20,000kg
This TradeQuip “Made for the Trade” Air/ Hydraulic “Low Profile” Bottle Jack is designed to operate pneumatically. This unit provides enough lifting power for use with farm vehicles, heavy duty machinery, industrial construction equipment and more. It’s low profile design get’s you out of tight situations with ease. This 20,000kg heavy-duty air/hydraulic bottle jack with powerful heavy duty operation is the perfect choice for a wide variety of uses. The power of air makes it easy to lift farm vehicles, trucks, lawn mowers, heavy equipment and other large loads! Use this workhorse with a 100-145 PSI rated air pressure supply to lighten the load and provide the fast, strong lifting power you need. The 150–260mm lift range raises the load to the desired height and a knurled, heat-treated pad with screw height adjustment allows you to fine-tune the jack from there. This Bottle Jack is designed for day in and day out durability. A rugged high-grade steel frame is teamed with a lead-free paint finish that covers the entire surface to ensure long-lasting wear and help prevent rust. The paint is oil-, grease- and dirt-resistant for easy cleanup no matter how often you put this jack to work.
Fitted with a safety overload valve for extra protection, the safety valve is installed between the pump and high-pressure check valve in the barrel/lift ram assembly. When attempting to raise a load greater than the jack’s capacity, the safety valve opens on each pump stroke and diverts any further oil back to the reservoir thus preventing the raising of the load.
Features:
- All air bottle jacks have chrome plated rams
- Built-in by-pass device protects hydraulic system from over pumping damage
- Versatile “quick connector” design provides for easy removal of air hose from air motor allowing compact storage or remote operation
- Compact yet powerful Air Turbo Motor
Specifications:
- Safe Working Capacity: 20,000kg
- Minimum Height: 148mm
- Maximum Height: 259mm
- Hydraulic Stroke: 66mm
- Screw Extension Height: 45mm
- Operating Air Pressure: 100-145psi
- Base Area: 201x135mm
- Carton: 355x165x165mm
- Gross Weight: 10kg
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use support stands.
Intended Use
For heavy duty use on truck, agriculture, construction, mining, automotive, and marine applications where lifting and lowering is required.
(0 reviews) -
Bottle JacksTQB BRANDS Bottle Jack Squat Air/Hydraulic 20,000kg
This TradeQuip “Made for the Trade” Air/ Hydraulic Bottle Jack is designed to operate pneumatically. The power of air makes it easy to lift farm vehicles, trucks, lawn mowers, heavy duty machinery, industrial construction equipment and more. With it’s low profile design this 20,000kg heavy-duty air/hydraulic bottle jack is the perfect choice for a wide variety of uses. Use this workhorse with a 110-125 PSI rated air pressure supply to lighten the load and provide the fast, strong lifting power you need. The 178–328mm lift range raises the load to the desired height and a knurled, heat-treated pad with screw height adjustment allows fine-tune of the jack from there.
Fitted with a safety overload valve for extra protection, the safety valve is installed between the pump and high-pressure check valve in the barrel/lift ram assembly. When attempting to raise a load greater than the jack’s capacity, the safety valve opens on each pump stroke and diverts any further oil back to the reservoir thus preventing the raising of the load.
(Previous models include product code/s; BSLAJ20)
Features:
- Machined and polished cylinders with die-cut threads
- Fabricated from hard-cast steel with heat-treated critical stress areas
- Unique cross-type forged release valve assures positive load control
- Built-in bypass protection prevents damage from over pumping
- Compact yet powerful Air Turbo motor
- Versatile “quick connector provides ‘quick & easy air connection
- Two piece pump handle
- Convenient welded carry handle
Specifications:
- Safe Working Capacity: 20,000kg
- Minimum Height: 178mm
- Maximum Height: 328mm
- Hydraulic Stroke: 87mm
- Screw Extension Height: 63mm
- Operating Air Pressure: 110-125psi
- Air Fitting: 1/4″
- Carton: 390x192x195mm
- Gross Weight: 13kg
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use support stands.
Intended Use
For heavy duty use on truck, agriculture, construction, mining, automotive, and marine applications where lifting and lowering is required.
(0 reviews) -
Bottle JacksTQB BRANDS Bottle Jack Squat Air/Hydraulic 20,000kg
This TQ Pro “Latest Applied Technologies” 20,000kg Air/Hydraulic Bottle Jack is constructed of superior grade steel and built to premium standards for quality and durability. The premium-quality, large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load. A built-in bypass device protects the hydraulic system from over-pumping damage. The sturdy and stable design features a welded base and cylinder to assure strength and eliminate leaks.
Fitted with a safety overload valve for extra protection, the safety valve is installed between the pump and high-pressure check valve in the barrel/lift ram assembly. When attempting to raise a load greater than the jack’s capacity, the safety valve opens on each pump stroke and diverts any further oil back to the reservoir thus preventing the raising of the load.
(Previous models include product code/s; BSLAJ20)
Features
- Using CNC technology, the frame is constructed using superior-grade steel and built to premium TQ Pro standards for professional quality and durability
- Premium quality large diameter hydraulic steel cylinder with precision tolerances
- Piston-ram is treated and polished to minimise wear and extend service life
- High capability premium quality seal system efficiently protects internal hydraulics keeping it free from contaminants
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting premium finish
- Paint is oil, grease and dirt-resistant for easy cleanup
Thick Base Design
The thick base design is to provide the firmest footprint reducing flex. This substantially increases the life of the hydraulic ram under the toughest lifting and lowering circumstances.
Welded Reservoir
A welded reservoir instead of the screw base results in a substantial increase in durability. With the completely sealed hydraulic system, wear and tear and internal contamination is dramatically reduced.
Specifications
- Safe Working Capacity: 20,000kg
- Maximum Height: 330mm
- Minimum Height: 185mm
- Hydraulic Lift: 80mm
- Adjustable Height: 61mm
- Operating Air Pressure: 110-125psi
- Air Inlet Fitting: 1/4″
- Carton: 380 x 195 x 200mm
- Nett Weight: 16kg
- Gross Weight: 17kg
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use support stands.
Intended Use
For professional specialist use on truck, agriculture, construction, mining, automotive and trailer applications whenever clearance is limited or very low to the ground.
(0 reviews) -
Transmission LiftersTQB BRANDS Clutch Jack – 130kg
The Borum Industrial 130kg Hydraulic Clutch Jack is perfect for earthmoving equipment and truck clutch and/or flywheel installation and removal. It features two fully adjustable splines, smooth, manually operated hydraulic lifting and lowering and four 360° swivel caster wheels for better load positioning. The ergonomic multi position rotating jacking handle makes overall maneuverability simple and efficient in a busy workshop.
Features
- Designed for lifting, lowering & installing/removing heavy vehicle clutch/flywheel assembles
- Frame is constructed of industrial-grade steel and built to exacting standards for quality and durability
- High quality hydraulic steel jacking cylinder results in low physical effort oil needed to lift load
- Industrial strength hydraulic system is protected from overload damage
- Filled with industrial grade 32 hydraulic fluid
- Rugged heavy industrial wheels and full swivel ball bearing castors
- User-friendly rotating pumping handle for maximum multi-directional operation
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy cleanup
- Two 10-tooth alignment splines included which conveniently stores on chassis
Specifications
- Safe Working Capacity: 130kg
- Minimum Height: 288mm
- Maximum Height: 980mm
- Chassis Dimensions: 1041 x 609mm
- 1 x 2″ Alignment Spline Included (10 Tooth)
- 1 x 1-3/4″ Alignment Spline Included (10 Tooth)
- Carton: 1070 x 710 x 220mm
- Gross Weight: 62kg
Intended Use
This clutch jack is designed to remove, install & transport (in the lowered position) 14″ and 15-1/2″ single and double disk clutches and/or flywheel assemblies on & off vehicles
(0 reviews) -
Wheel, Dollies & SuspensionTQB BRANDS Combi Portable Bead Breaker 5000kg
This Borum Industrial Hydraulic Bead Breaker delivers 5,000kg of force in seconds and is designed to work on most truck and tractor rims up to 26″. Ideal for use with all trucks, tractors, graders, harvester and skidder tyres, it suits all types of rims except 5-piece earthmover rims. It is expressly intended to be used as an aid in breaking the bead seal between a tyre and it’s one, two or three piece wheel rim for the purpose of reseating a bead seal, replacement of tyre or wheel and replacing tyre valves, tyre tubes etc. This Borum Industrial Hydraulic Bead Breaker can perform tyre work or tyre replacements without ever removing the wheel from the vehicle. This quality unit is excellent for field maintenance use on agricultural machines.
The bead breaker works directly on the bead of the tyre and will not damage the tyre if used correctly when used with the optional TradeQuip 2054T 10,000 psi air/hydraulic pump and the Eagle Pro EH-8206F Hydraulic Hose With Coupler.
Features
- Economical solution for agricultural wheels and 1, 2 and 3piece truck tyre rims
- Hydraulically clamps on wheel
- Durable steel construction
- Clamps to wheel rim & breaks bead simply with up to 5,000kg of force
- Requires 10,000psi air/hydraulic pump (sold separately)
- Most popular tool for breaking beads on most agricultural tyres
Specifications
- Safe Working Capacity: 5,000kg
- Rated Pressure: 10,000psi
- Maximum Rim Diameter: 660mm (26″)
- Maximum Rim Width: 125mm (5″)
- Ram Stroke: 90mm
- Pressure Connection: 3/8″ – 18NPTF
- Hydraulic Oil Capacity: 250ml
- Dimensions: 429x140x324mm
- Weight: 16kg
- Carton: 375x375x155mm
Intended Use
Designed to be used as an aid in breaking the bead seal between a tyre and it’s one, two or three piece wheel rim for the purpose of reseating a bead seal, replacement of tyre or wheel and replacing tyre valves, tyre tubes etc.
(0 reviews) -
Vices & AnvilsTQB BRANDS Commercial Bench Vice Swivel with Anvil 150mm
Borum Industrial Bench Vices are made with a high quality ductile cast iron body built for rugged use and extended life. Each has the capability of handling pipe as well as mounting to the bench with 3 mounting posts providing more stability and secure hold. Constructed of ductile iron, the Borum Industrial Bench Vice with anvil has a precision cast body with a swivel base, the vice can be rotated 360° to offer flexibility. Whether used for cutting, screwing, drilling, planing, sanding, or just holding, this Borum Industrial Bench Vice is perfect for any type of industrial holding application. The Borum 150mm Industrial Bench Vice is a precision-manufactured, hefty brute with robust design features that make it more user friendly and efficient in an industrial workshop environment. Both the high quality ductile cast iron steel and durability-inducing drop forging process ensures that the Borum 150mm Industrial Bench Vice will continue to perform like new for a many years.
(Previous models include product code/s; 7416S)
Features
- High quality ductile cast iron body built for rugged use and extended life
- Replaceable serrated top jaws
- 360° swivel base with double lockdown for quick and easy positioning
- Designed for general duty applications
- Built in pipe jaws handle various pipe sizes
- Large anvil work surface
- Lead-free paint finish ensures long-lasting wear and helps prevent rust.
- Oil, grease and dirt-resistant finish for easy cleanup.
Specifications
- Jaw Width: 150mm
- Jaw Opening: 150mm
- Throat Depth: 105mm
- Anvil Size: 90x105mm
- Mounting Base: 4Holes – 15mm dia – 160mm apart
- Net Weight: 25kg
(0 reviews) -
Vices & AnvilsTQB BRANDS Commercial Bench Vice Swivel with Anvil 200mm
Borum Industrial Bench Vices are made with a high quality ductile cast iron body built for rugged use and extended life. Each has the capability of handling pipe as well as mounting to the bench with 3 mounting posts providing more stability and secure hold. Constructed of ductile iron, the Borum Industrial Bench Vice with anvil has a precision cast body with a swivel base, the vice can be rotated 360° to offer flexibility. Whether used for cutting, screwing, drilling, planing, sanding, or just holding, this Borum Industrial Bench Vice is perfect for any type of industrial holding application. The Borum Industrial 200mm Bench Vice is a precision-manufactured, hefty brute with robust design features that make it more user friendly and efficient in an industrial workshop environment. Both the high quality ductile cast iron steel and durability-inducing drop forging process ensures that the Borum Industrial 200mm Bench Vice will continue to perform like new for a many years. (Previous models include product code/s; 7418S)
Features
- High quality ductile cast iron body built for rugged use and extended life
- Replaceable serrated top jaws
- 360° swivel base with double lockdown for quick and easy positioning
- Designed for general duty applications
- Built in pipe jaws handle various pipe sizes
- Large anvil work surface
- Lead-free paint finish ensures long-lasting wear and helps prevent rust
- Oil, grease and dirt-resistant finish for easy cleanup
Specifications
- Jaw Width: 200mm
- Jaw Opening: 200mm
- Throat Depth: 115mm
- Anvil Size: 100x113mm
- Mounting Base: 4Holes – 15mm dia – 160mm apart
- Net Weight: 30kg
(0 reviews) -
Workshop Presses & AccessoriesTQB BRANDS Electric Hydraulic Press 30,000kg
This TQ Pro “Latest Technologies” 30,000kg Electric Hydraulic Workshop Press is capable of bending, pressing or extruding and makes light work of installing ball joints, U-joints and pulleys – making it ideal for many automotive and industrial applications. Polished inner cylinder walls extend the life of the hydraulic seals to minimise abrasion and wear, while the cylinder ram and pistons are also polished and chromed, guided by high performance seals, wear rings and dust seals. Includes a dial gauge for dual metric/tons pressure readings. The strong frames and powerful high-pressure hydraulics will provide years of dependable service in many applications. When components need to be removed or assembled, TQ Pro “Latest Technologies” electric hydraulic presses deliver the controlled power to safely remove and install bearings, gears, U-joints, bushings, ball joints and pulleys with precision and versatility! This 30,000kg Electric Hydraulic Workshop Press features a dual stage pump where the first stage pump quickly extends the ram to the load point & then the second stage engages and provides higher pressure to perform pressing operations. The ram cylinder glides across the width of the upper frame allowing off-centre pressing.
Includes a set of mandrill pressing attachments mounted onto the frame as well as a polycarbonate safety guard providing added security for the user.
Features:
- Premium-grade steel built to exacting standards for quality and durability
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy clean up
- High quality large diameter steel hydraulic cylinder unit results in lower oil pressure needed to develop pressing force, helping to reduce wear and extend service life of the ram and pump
- Hydraulics are powered with a high quality oil, which offers better corrosion resistance and high/low temperature flexibility
- Foot Operated electric trigger for extending & retracting the main ram
- Key operated power switch ensures user safety by providing full lock out of the pump functions while not in service
- Easy to access raise & lower buttons on press frame with large emergency stop button
- Flexible LED inspection light illuminates the working area
- Integrated bed winch with swivel handle
- 2-way lockable V-Blocks ensure they remain secured on the press
- Integrated overload protection valve keeps from overloading the system
- Handy removable parts tray
- Includes a set of mandrill pressing attachments
- Polycarbonate safety guard included
Specifications:
- Safe Working Capacity: 30,000kg
- Working Range: 25-850mm
- Overall Height: 1800mm
- Overall Width: 1080mm
- Overall Depth: 505mm
- Ram Diameter: 60mm
- Frame Inside: 148mm
- Frame Thickness: 8mm
- Bed Thickness: 10mm
- Bed Inside: 165mm
- Bed Width: 600mm
- Ram Sideways Movement: 200mm
- Piston Ram Stroke: 145mm
- Screw Adjustment: 75mm
- Bed Height Settings: 6
- Lower Parts Tray: 225)L) x 135(W) x 55(D)mm
- Included Press Pins & Mount: 2T, 3T, 6T, 8T, 10T, 12T, 13T, 15T
- Power Unit: 240V, 10A Plug
- Minimum Height Clearance Required With Bed At Max Height & Safety Guard Opened Fully: 2230mm
- Nett Weight: 174kg
- Crate: 1690 x 910 x 340mm
- Gross Weight: 205kg
Included Safety Guard Specifications:
- Overall Dimensions Installed: 480L x 620H x 150Dmm
- Working Area (Guard Screen Raised): 400W x 535Hmm
- Protection Area (Guard Screen Lowered): 540W x 540Hmm
- Polycarbonate Guard Screen Thickness: 3mm
Foot Pedal Module Specifications:
- Overall Dimensions: 170 x 130 x 160mm
- Clearance Between Foot Pedals & Pedal Guard: 125mm
(0 reviews) -
Workshop Presses & AccessoriesTQB BRANDS Electric Hydraulic Press 50,000kg
This TQ Pro “Latest Technologies” 50,000kg Electric Hydraulic Workshop Press is capable of bending, pressing or extruding and makes light work of installing ball joints, U-joints and pulleys – making it ideal for many automotive and industrial applications. Polished inner cylinder walls extend the life of the hydraulic seals to minimise abrasion and wear, while the cylinder ram and pistons are also polished and chromed, guided by high performance seals, wear rings and dust seals. Includes a dial gauge for dual metric/tons pressure readings. The strong frames and powerful high-pressure hydraulics will provide years of dependable service in many applications. When components need to be removed or assembled, TQ Pro “Latest Technologies” electric hydraulic presses deliver the controlled power to safely remove and install bearings, gears, U-joints, bushings, ball joints and pulleys with precision and versatility! This 50,000kg Electric Hydraulic Workshop Press features a dual stage pump where the first stage pump quickly extends the ram to the load point & then the second stage engages and provides higher pressure to perform pressing operations. The ram cylinder glides across the width of the upper frame allowing off-centre pressing.
Includes a set of mandrill pressing attachments mounted onto the frame as well as a polycarbonate safety guard providing added security for the user..
Features:
- Premium-grade steel built to exacting standards for quality and durability
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy clean up
- High quality large diameter steel hydraulic cylinder unit results in lower oil pressure needed to develop pressing force, helping to reduce wear and extend service life of the ram and pump
- Hydraulics are powered with a high quality oil, which offers better corrosion resistance and high/low temperature flexibility
- Foot Operated electric trigger for extending & retracting the main ram
- Key operated power switch ensures user safety by providing full lock out of the pump functions while not in service
- Easy to access raise & lower buttons on press frame with large emergency stop button
- Flexible LED inspection light illuminates the working area
- Integrated bed winch with swivel handle
- 2-way lockable V-Blocks ensure they remain secured on the press
- Integrated overload protection valve keeps from overloading the system
- Handy removable parts tray
- Includes a set of mandrill pressing attachments
- Polycarbonate safety guard included
Specifications:
- Safe Working Capacity: 50,000kg
- Working Range: 80-780mm
- Overall Height: 1900mm
- Overall Width: 1240mm
- Overall Depth: 540mm
- Ram Diameter: 70mm
- Frame Inside: 200mm
- Frame Thickness: 10mm
- Bed Thickness: 12mm
- Bed Inside: 220mm
- Bed Width: 750mm
- Bed Gap (Workable Pressing Area): 480 x 220mm
- Ram Sideways Movement: 280mm
- Piston Ram Stroke: 145mm
- Screw Adjustment: 75mm
- Bed Height Settings: 6
- Lower Parts Tray: 225)L) x 135(W) x 55(D)mm
- Included Press Pins & Mount: 2T, 3T, 6T, 8T, 10T, 12T, 13T, 15T
- Power Unit: 240V, 10A Plug
- Minimum Height Clearance Required With Bed At Max Height & Safety Guard Opened Fully: 2220mm
- Nett Weight: 255kg
- Crate: 1860 x 1000 x 410mm
- Gross Weight: 290kg
Included Safety Guard Specifications:
- Overall Dimensions Installed: 620 x 620 x 150mm
- Working Area (Guard Screen Raised): 540 x 435mm
- Protection Area (Guard Screen Lowered): 540 x 540mm
- Polycarbonate Guard Screen Thickness: 3mm
Foot Pedal Module Specifications:
- Overall Dimensions: 170 x 130 x 160mm
- Clearance Between Foot Pedals & Pedal Guard: 125mm
(0 reviews) -
Cranes & Lifting DevicesTQB BRANDS Engine Crane 3000kg
This Heavy Duty TradeQuip “Made for the Trade” Engine Crane has a long stroke lifting ram, a single action pump with a maximum load capacity of 3,000kg. Very simple to use manual hydraulic operation. The jib extends to the desired lifting capacity of 1000kg, 2000kg or 3000kg secured by a single locking pin. Mounted on heavy duty castor wheels for excellent manoeuvrability around the workshop. The lifting range is 0-2500mm so any large engine can be lifted clear out of the engine bay with little effort. With great stability of its wide legs, this crane can also be used to lift machines or other heavy items, making for an excellent piece of equipment for the workshop or warehouse.
Features- Industrial grade engine crane
- Heavy duty hydraulic pump
- Adjustable boom in four positions for lifting
- Robust steel fabricated legs with structural supports
- Large castor wheels for easy mobility
Specifications
- Safe Working Capacity: 3,000kg
- Folded Height: 1540mm
- Maximum Lifting Height @ 3000kg: 1745mm
- Maximum Lifting Height @ 1000kg: 2088mm
- Jib Length Fully Retracted @ 3000kg: 1100mm
- Jib Length Fully Extended @ 1000kg: 1730mm
- Overall Length Fully Extended: 2385mm
- Overall Length Fully Retracted: 1480mm
- Overall Width Fully Extended: 875mm
- Overall Width Fully Retracted: 785mm
- Distance Between Ram & Chain at 3T (Max hydraulic lift): 470mm
- Distance Between Ram & Chain at 2T (Max hydraulic lift): 650mm
- Distance Between Ram & Chain at 1.5T (Max hydraulic lift): 830mm
- Distance Between Ram & Chain at 1T (Max hydraulic lift): 1020mm
- Leg Height 190mm
- Nett Weight: 121.5kg
- Carton 1 of 3 : 1330 x 860 x 100mm (Weight: 29kg)
- Carton 2 of 3 : 1470 x 300 x 200mm (Weight: 82kg)
- Carton 3 of 3 : 700 x 180 x 150mm (Weight: 15kg)
Intended Use
For regular professional use, to raise and/or lower diesel engines and transmissions during service or repair work.
(0 reviews) -
Cranes & Lifting DevicesTQB BRANDS Engine Crane Foldable 1200kg
This Australian Standards AS1418.5 approved TradeQuip “Made for the Trade” hydraulic engine crane has a 8 tonne long stroke lifting ram and double acting pump with a maximum load capacity of 1,200kg. Very simple to use the ‘Quick-lift’ double acting hydraulic pump is equipped with automatic safety valve to control the lowering speed under load. This double action ‘Quicklift’ design… works by lifting the load on the UP and DOWN stroke of the ram handle.The jib extends to the desired lifting capacity of 250kg, 500kg, 750kg or 1200kg secured by a single locking pin. Mounted on 6 swivel castor wheels this engine crane has excellent manoeuvrability around the workshop. The lifting range is 0-2300mm so an engine can be lifted clear out of the engine bay with little effort. With great stability of its wide legs, this crane can also be used to lift machines or other heavy items, making for an excellent piece of equipment for the workshop or warehouse. It is also designed to quickly folds up when not in use to save space in the workshop.(Previous models include product code/s; 1000, 1000T, 1001)
Features- Ideal for automotive, light engineering and general workshops
- Adjustable boom in four positions for lifting
- Outrigger legs easily fold up for transport or storage
- Six swivel castor wheels allow easy mobility
- Double action 8,000kg long stroke hydraulic lifting ram
- Overload Protection
- Constructed of high-grade steel and built to exacting standards for quality and durability
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy cleanup
- Short lifting chain & hook with safety latch
- Easily exceeds Australian Standards AS1418.5 requirements
Specifications
- Safe Working Capacity: 1,200kg (AS1418.5 approved)
- Adjustable Boom: 250kg, 500kg, 750kg & 1200kg
- Lifting Ram Capacity: 8,000kg > Available as Spare Part: Product Code: 2008
- Stabiliser Arms Clearance: 195mm
- Dimensions: (Arms Ext): 2300(H) x 960(W) x 550(D)mm
- See pic for boom length, height and capacity
- Nett Weight: 85kg
- Carton 1 of 2 : 1440 x 300 x 160mm (Weight: 59kg)
- Carton 2 of 2 : 850 x 580 x 90mm (Weight: 32kg)
Intended Use
For regular professional use, to raise and/or lower passenger car engines and transmissions during service or repair work.
(0 reviews) - Ideal for automotive, light engineering and general workshops
-
Cranes & Lifting DevicesTQB BRANDS Engine Crane Load Leveller 680kg
The perfect accessory for our engine cranes, this TradeQuip “Made for the Trade” Engine Leveller reduces the hazards and hassles out of balancing heavy, awkward loads and helps protect engines, transmissions and vehicle damage. Perfect for removing and installing engines, it easily adjusts the angle of the engine simply by turning the swivel handle and is compatible with most good brands of engine cranes.The load leveller includes four 300mm chains with support brackets for increased load security and safety.
Features
- Easy to use, just crank to level
- Tilts forward and backward for easy motor mount alignment
- Heavy duty steel I-beam construction
- Balances engine/transmission for easier installation or removal
- Constructed of high-grade steel and built to exacting standards for quality and durability
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy cleanup
- Easily adapts to different engine cranes and improves the install/removal operation
- 4-point mounting system provides maximum control
- Worm drive shaft rotates with a built-in swivel handle for easy balancing
- 3 adjustable chain assembly holes for different engine sizes
Specifications
- Safe Working Capacity: 680kg
- Chain Length: 300mm
- Chain Anchor Positions: 3
- Engine Mount Positions: 4
- Working Range: 250mm, 275mm, 310mm
- Weight: 6kg
- Carton: 465 x 190 x 60mm
Intended Use
For regular professional use, to tilt engines and/or transmissions whilst raising and/or lowering passenger car engines and transmissions with an engine crane or hoist.
(0 reviews) -
Cranes & Lifting DevicesTQB BRANDS Engine Crane Ram 8000kg
This twin piston TradeQuip “Made for the Trade” 8,000kg Long Hydraulic Ram is the replacement hydraulic ram for use on TradeQuip 1001T hydraulic engine cranes. Mounts directly onto the engine crane and features a slow release function while providing a long 630–1135mm lift range. High quality large diameter twin cylinder hydraulic pump unit results in Quick Lift action, lower oil pressure needed to raise the load, which reduces wear and extends service life. 100% factory vertical load tested for reliability and safety. For vertical use only.
Replacement long hydraulic ram to suit TradeQuip 1001T Engine Crane.
Features
- Double action “Quick Lift” design for quick positioning without load
- Built in ‘Overload Protection’
- Constructed of high grade steel to exacting specifications for strength and durability
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to prevent rust
- Paint is oil, grease and dirt resistant
- Factory filled with high quality hydraulic jack oil, which offers better corrosion resistance and high/low temperature flexibility
- Includes lift handle for easy operation
Specifications
- Safe Working Capacity: 8,000kg
- Minimum Length: 630mm
- Maximum Length: 1135mm
- Ram Pin Hole: 16mm dia. 35mm Outside Ram
- Ram Diameter: 80mm
- Clevis Base Pin Hole: 16mm dia
- Clevis Base: 25mm Inside – 45mm Outside
- Base Width: 129mm
- Nett Weight: 10.5kg
- Carton: 700 x 170 x 150mm
- Gross Weight: 11.5kg
Intended Use
As a direct replacement for the hydraulic unit on a 1001T TradeQuip 1200kg Engine Crane only
(0 reviews) -
Engine Stands & SupportsTQB BRANDS Engine Stand 450kg
eQuipt “Designed to Deliver” 450kg Engine Stand has a 4-leg design featuring a rugged frame with a 4-hole mounting head that rotates 360°, making the unit ideal for 4 cylinder engines. When you’ve got an engine repair job that can’t be completed while the engine block is in the vehicle, this engine stand provides a sturdy support structure to secure the removed engine in mid-air, so you can access any part of it. Use an engine crane to remove the engine from the vehicle, then mount it to the faceplate on this engine stand. (Previous models include product code/s; 1006, RLES450, TQES450)
Features
- Rugged tubular steel frame with attractive durable finish
- 360 degree rotating head that locks in 8 positions
- Slotted mounting head for full adjustment
- Extra wide base for stability and safety
- Easy knockdown and quick assembly design for storing and transporting
- Large diameter wheels and castors for smooth manoeuvring
- Suitable for cast iron/alloy block engines up to 4 cylinder engines
Specifications
- Safe Working Capacity: 450kg
- Centre Height: 780mm
- Width @fixed wheels: 750mm
- Width @swivel castors: 400mm
- Dimensions: 760(L) x 750(W) x 860(H) mm
- Weight: 21kg
- Carton: 910 x 210 x 180mm
Intended Use
For safe handling and positioning of passenger car engines up to 4 cylinder during dismantling and re-assembly.
(0 reviews) -
Engine Stands & SupportsTQB BRANDS Engine Stand 680kg
This TradeQuip “Made for the Trade” 680kg Engine Stand delivers extra strength and accessibility, making it essential for busy garages. Easily adapts to accommodate a variety of engine sizes. “U” shaped base for added stability and support. Adjustable mounting brackets for attachment to engine block. 360° rotating mount head with multi-locking positions. 4 Heavy Duty steel swivel castors for easy manueverability. Legs can be removed for quick, convenient and easy storage. (Previous models include product code/s; 1191)
Features
- Constructed of high-grade steel and built to “Made for the Trade” standards for quality and durability
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and prevent rust
- Paint is oil, grease and dirt-resistant for easy cleanup
- 360° swivelling and locking head allows easy rotation for obtaining the perfect angle position
- Long handle with rubber grips allows easy engine rotation
- Heavy-gauge tubular construction with industrial-grade steel bearing castors for easy maneuverability
- Mounting head has four adjustable arms with bolt holes to accommodate various load sizes
- Removable legs for convenient storage
Specifications
- Safe Working Capacity: 680kg
- Operating Height: 895mm
- Width: 800mm
- Length: 870mm
- Distance between legs: 670mm
- Lower steel tubing: 70x70mm
- Column tubing: 60x60mm
- Column base tubing: 70x76mm
- Leg tubing: 60x60mm
- Mounting head plate: 248x149mm
- Mounting head plate (with fingers): 360x245mm
- Nett Weight: 39kg
- Carton: 870 x 240 x 210mm
- Gross Weight: 41kg
Intended Use
For safe handling and positioning of most 4 and 6 cylinder passenger car engines during dismantling and re-assembly. WARNING: Engine dimensions must be within legs of Engine Stand.
(0 reviews) -
Engine Stands & SupportsTQB BRANDS Engine Stand Foldable 900kg
This TradeQuip “Made for the Trade” 900kg Engine Stand delivers extra strength and accessibility, making it essential for busy garages. Easily adapts to accommodate a variety of engine sizes. “H” shaped base for added stability and support. Adjustable mounting brackets for attachment to engine block. 360° rotating mount head with multi-locking positions. 5 steel swivel castors for easy maneuverability. Legs fold up for quick, convenient and easy storage. (Previous models include product code/s; 1192)
Features
- Constructed of high-grade steel and built to “Made for the Trade” standards for quality and durability
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and prevent rust
- Paint is oil, grease and dirt-resistant for easy cleanup
- 360° swivelling and locking head allows easy rotation for obtaining the perfect angle position
- Long handle with rubber grips allows easy engine rotation
- Heavy-gauge tubular construction with industrial-grade steel bearing castors for easy maneuverability
- Mounting head has four adjustable arms with bolt holes to accommodate various load sizes
- Foldable legs for convenient storage
Specifications
- Safe Working Capacity: 900kg
- Operating Height (A) : 800mm Floor to mounting plate centre
- Width(B) : 530mm
- Length (C): 1110mm
- ID between legs (D): 780mm
- OD between legs (E): 930mm
- Lower steel tubing: 60x60mm
- Column tubing: 70x70mm
- Nett Weight: 45kg
- Carton: 910 x 210 x 180mm
- Gross Weight: 43kg
Intended Use
For safe handling and positioning of most 6 and 8 cylinder passenger car engines during dismantling and re-assembly. WARNING: Engine dimensions must be within legs of Engine Stand.
(0 reviews) -
Engine Stands & SupportsTQB BRANDS Engine Support Bar 500kg
Constructed of heavy-duty powder coated steel for durability, the TradeQuip “Made for the Trade” Engine Support Bars are a must when working on under the bonnet repairs such as removing the transmission or transaxle. This 1019T Engine Support Bar comes with adjustable extension arms, neoprene support pads and adjustable height screw. Designed to support and accurately position engines during maintenance operations such as replacing engine/transmission mountings and certain body panels, the rubber padded support legs prevents slippage as well as protecting the paint.
Features- Adjustable to fit across most car bonnets
- Supports engine or transmission in place during repairs
- Rubber cushioned support legs prevent damage to paint
- Powder coat finish
- Adjustment screw for load levelling
- Supplied with a short length of chain
Specifications
- Safe Working Capacity: 500kg
- Minimum Extension: 1020mm
- Maximum Extension: 1600mm
- Carton: 1030 x 200 x 80mm
- Gross Weight: 18kg
Intended Use
Safely supports an engine in place during repairs such as replacing engine mounts or removing the transmission or transaxle without removing the engine.
(0 reviews) -
Engine Stands & SupportsTQB BRANDS Engine Support Bar 500kg
Constructed of high gloss enamel coated steel for durability, this TradeQuip 500kg capacity Engine Support Bar features dual hook assemblies for increased load balance when working on heavy engines or when removing the transmission or transaxle. This 1020T Engine Support Bar comes with adjustable extension arms, neoprene support pads and adjustable height screw. Designed to support and accurately position engines during maintenance operations such as replacing engine/transmission mountings and certain body panels, the rubber padded support legs prevents slippage as well as damage to paint.
Features- Dual hook assemblies for balanced support
- Adjustable to fit across most car bonnets
- Supports engine or transmission in place during repairs
- Rubber cushioned support legs prevent damage to paint
- High gloss enamel finish
- Adjustment screw for load levelling
- Supplied with a short length of chain
Specifications
- Safe Working Capacity: 500kg
- Minimum Extension: 1020mm
- Maximum Extension: 1430mm
- Nett Weight: 19kg
- Carton: 1530 x 120 x 120mm
- Gross Weight: 20kg
Intended Use
Safely supports an engine in place during repairs such as replacing engine mounts or removing the transmission or transaxle without removing the engine.
(0 reviews) -
Engine Stands & SupportsTQB BRANDS Engine Support Bar 500kg Dual Hook
Built to our TradeQuip “Made for the Trade” specifications, this transverse-mounted engine support bar has a two angle chain hook for safer and more stable chain support. This engine support bar features fully adjustable 4 point mounting system which will provide a very stable platform on any car. Weight rating is 500kg and includes eight rubber padded legs to prevent slipping and damage to cars finish. This tool features a dual hook design for holding engine or transmission in place. Finished in high gloss enamel for long life and durability. This design allows for improved stability, more flexibility and application to different vehicle types as well as added safety of 4 points of support and stability.
Perfectly suited for transverse and longitudinally-mounted engines alike.
Note: It is important that chains are hooked to both sides of hook, to ensure load is supported evenly.
Features- Cross bar feature for improved stability and more flexibility
- Dual hook assemblies for balanced support
- Adjustable to fit across most car bonnets
- Supports engine or transmission in place during repairs
- Extra long rubber cushioned support legs prevent damage to paint
- High gloss enamel finish
- Adjustment screws for load levelling
- Note: Chain not included
Specifications
- Safe Working Capacity: 500kg
- Minimum Extension: 1020mm
- Maximum Extension: 1630mm
- Nett Weight: 23kg
- Carton: 1730 x 180 x 80mm
- Gross Weight: 24kg
Intended Use
Safely supports an engine in place during repairs such as replacing engine mounts or removing the transmission or transaxle without removing the engine.
(0 reviews) -
Vices & AnvilsTQB BRANDS Engineers Vice Fixed with Anvil 125mm
This TradeQuip Cast Engineers Vice is designed for general-purpose, service or maintenance use. It features a tough cast iron body and slide with a machined steel screw and handle. This small foot print TradeQuip Engineers Vice has a fixed base for stability and forged serrated steel jaws to tightly grip the workpiece and keep it steady. TradeQuip Vices are designed to withstand a heavy amount of pressure with less risk of breakage. The anvil is perfect for shaping and fabrication work. The heavy metal cast construction permits them to tolerate tough and repeated work. Commonly used in workshops, garages and machinery shops.
Features
- Constructed from thick rugged cast iron
- CNC machined parts and fully ground rails
- Forge hardened steel serrated jaws
- Precision machined steel screw and handle
- Reinforced mounting lugs
- Flat and durable anvil surface incorporated
Specifications
- Cast Iron
- Jaw Width: 125mm
- Jaw Opening: 130mm
- Throat Depth: 69mm
- Anvil Size: 90x85mm
- Nett Weight: 9.5kg
(0 reviews) -
Vices & AnvilsTQB BRANDS Engineers Vice Fixed with Anvil 150mm
This TradeQuip Cast Engineers Vice is designed for general-purpose, service or maintenance use. It features a tough cast iron body and slide with a machined steel screw and handle. This small foot print TradeQuip Engineers Vice has a fixed base for stability and forged serrated steel jaws to tightly grip the workpiece and keep it steady. TradeQuip Vices are designed to withstand a heavy amount of pressure with less risk of breakage. The anvil is perfect for shaping and fabrication work. The heavy metal cast construction permits them to tolerate tough and repeated work. Commonly used in workshops, garages and machinery shops.
Features
- Constructed from thick rugged cast iron
- CNC machined parts and fully ground rails
- Forge hardened steel serrated jaws
- Precision machined steel screw and handle
- Reinforced mounting lugs
- Flat and durable anvil surface incorporated
Specifications
- Cast Iron
- Jaw Width: 150mm
- Jaw Opening: 150mm
- Throat Depth: 76mm
- Anvil Size: 100x105mm
- Distance Between Mounting Bolt Holes: 115mm centre to centre
- Nett Weight: 15kg
(0 reviews) -
Vices & AnvilsTQB BRANDS Engineers Vice Fixed with Anvil 200mm
This TradeQuip Cast Engineers Vice is designed for general-purpose, service or maintenance use. It features a tough cast iron body and slide with a machined steel screw and handle. This small foot print TradeQuip Engineers Vice has a fixed base for stability and forged serrated steel jaws to tightly grip the workpiece and keep it steady. TradeQuip Vices are designed to withstand a heavy amount of pressure with less risk of breakage. The anvil is perfect for shaping and fabrication work. The heavy metal cast construction permits them to tolerate tough and repeated work. Commonly used in workshops, garages and machinery shops.
Features
- Constructed from thick rugged cast iron
- CNC machined parts and fully ground rails
- Forge hardened steel serrated jaws
- Precision machined steel screw and handle
- Reinforced mounting lugs
- Flat and durable anvil surface incorporated
Specifications
- Jaw Width: 200mm
- 170mmThroat Depth: 88mm
- Anvil Size: 105x105mm
- Nett Weight: 23kg
(0 reviews) -
Vices & AnvilsTQB BRANDS Engineers Vice Multi-Purpose with Pipe Jaws 150mm
Constructed of ductile iron, the TradeQuip “Made for the Trade” Multi Purpose Bench Vice range is designed with rugged thick malleable cast body and precision machined jaws, ideal for medium duty work. With a swivel base, the vice body and jaw angle can be rotated to offer full flexibility for holding long and/or awkward working pieces. Our TradeQuip “Made for the Trade” Multi-Purpose Bench Vices do it all. Jaws rotate 360° for unlimited work piece positioning and clamping flat, as well as round stock (with the built-in pipe jaws). The 360° rotating head clamps material at any angle and the 90° left and right indexing offers quick set up as well as permanent pipe jaws and a v-jaw to hold round objects vertically.
TradeQuip “Made for the Trade” Multi-Purpose Bench Vices are built for professional durability and dependability. These vices are constructed from 30,000psi malleable cast iron and come equipped with replaceable cross-grooved steel jaws to provide a strong grip and prevent workpiece slippage. The built-in cast iron pipe jaws are grooved for enhanced grip and allow for easy clamping of pipe and/or other rounded material. A large anvil work surface on the back of the vice is perfect for hammering and shaping metal pieces. The 360° swivel base with a 360° swivel head (with lock down) offers maximum versatility for clamping most workpiece lengths at any angle.
Designed to meet the needs of most workshops, garages and machinery shops, the TradeQuip “Made for the Trade” Multi-Purpose Bench Vice range, produces reliability and versatility with a maximum clamping power that will get a wide variety of jobs done with confidence.
Features
- Body of rugged quality malleable cast iron
- Forge hardened steel serrated jaws
- Precision machined steel screw and handle
- Reinforced mounting lugs
- 360° Swivel base locks in place or greater versatility
- Jaws rotate 360° and lock for unlimited work piece positioning
- Holds flat stock as well as round stock with the built-in pipe jaws
- Large hardened anvil work surface
Specifications
- Jaw Width: 150mm
- Jaw Opening: 140mm
- Throat Depth: 80mm
- Pipe Jaw Maximum Diameter: 75mm
- Anvil Size: 80x65mm
- Mounting Pattern: 125mm/4-hole square
- Base Swivel Capability: 360°
- Jaw Rotation Capability: 360°
- Nett Weight: 20kg
(0 reviews) -
Vices & AnvilsTQB BRANDS Engineers Vice Swivel Base with Anvil 125mm
Toughened quality malleable cast iron body with a machined steel screw and handle, this TradeQuip “Made for the Trade” Engineers Bench Vice has forged steel serrated jaws to provide a sure grip and keep your workpiece steady. A large hardened anvil work surface is perfect for shaping and fabrication work. The robust swivel base offers flexibility for efficiency and a large machined centre slide keeps jaws precisely aligned under maximum clamping pressure.
Features
- Body of rugged quality malleable cast iron
- Forge hardened steel serrated jaws
- Precision machined steel screw and handle
- Reinforced mounting lugs
- Swivel base locks in place
- Large hardened anvil work surface incorporated
Specifications
- Jaw Width: 125mm
- Jaw Opening: 140mm
- Throat Depth: 76mm
- Anvil Size: 106x106mm
- Base Swivel: 120°
- Net Weight: 18kg
(0 reviews) -
Vices & AnvilsTQB BRANDS Engineers Vice Swivel Base with Anvil 150mm
Toughened quality malleable cast iron body with a machined steel screw and handle, this TradeQuip “Made for the Trade”Engineers Bench Vice has forged steel serrated jaws to provide a sure grip and keep your workpiece steady. A large hardened anvil work surface is perfect for shaping and fabrication work. The robust swivel base offers flexibility for efficiency and a large machined centre slide keeps jaws precisely aligned under maximum clamping pressure.
Features
- Body of rugged quality malleable cast iron
- Forge hardened steel serrated jaws
- Precision machined steel screw and handle
- Reinforced mounting lugs
- Swivel base locks in place
- Large hardened anvil work surface incorporated
Specifications
- Jaw Width: 150mm
- Jaw Opening: 170mm
- Throat Depth: 86mm
- Anvil Size: 127x127mm
- Net Weight: 27kg
(0 reviews) -
Vices & AnvilsTQB BRANDS Engineers Vice Swivel Base with Anvil 200mm
Toughened quality malleable cast iron body with a machined steel screw and handle, this TradeQuip “Made for the Trade” Engineers Bench Vice has forged steel serrated jaws to provide a sure grip and keep your workpiece steady. A large hardened anvil work surface is perfect for shaping and fabrication work. The robust swivel base offers flexibility for efficiency and a large machined centre slide keeps jaws precisely aligned under maximum clamping pressure.
Features
- Body of rugged quality malleable cast iron
- Forge hardened steel serrated jaws
- Precision machined steel screw and handle
- Reinforced mounting lugs
- Swivel base locks in place
- Large hardened anvil work surface incorporated
Specifications
- Jaw Width: 200mm
- Jaw Opening: 220mm
- Throat Depth: 110mm
- Anvil Size: 147x147mm
- Net Weight: 41kg
(0 reviews) -
Fans, Coolers, Heaters & Air ConTQB BRANDS Evaporative Cooler – 150W
With its compact size, this eQuipt “Designed to Deliver” Portable Evaporative Cooling unit is perfectly suited to smaller work spaces, yet still delivers an impressive amount of air output. This easy-to-operate unit produces up to 6,000 cubic metres of airflow per hour. It is fitted with a rugged, weather-resistant one-piece moulded polyethylene housing that will not crack or leak. The remote control 3-speed fan forces warm air over rigid water soaked evaporative cooling media to reduce ambient temperatures by up to 10°C . Adjustable swing louvre feature that offers swinging airflow and allows you to adjust the cooled air output to where you need it.
An evaporative cooler (also known as a desert cooler or wet air cooler) is a device that cools air through the evaporation of water. These units are well suited for climates where the air is hot and humidity is low. They combine the natural cooling properties of water with a steady breeze to lower indoor temperatures. Evaporative cooling will provide a substantial energy savings over refrigerated air units, while the simplicity of the design results in low maintenance requirements.
Compared to other climate control systems available, evaporative air cooling provides the most energy efficient temperature relief for commercial or industrial environments of any scale.
Up to 80% more economical than conventional air conditioning systems, our evaporative cooling systems have delivered proved cost reductions and operational returns for many industrial and mechanical workshops.
With the substantial savings of energy and the constant changes in the air, a portable evaporative cooler is ideally suited for area cooling or spot cooling of rooms, workshops, factories, laundries, schools, agricultural sheds, and more.
Water Consumption can increase by 300% due to ‘Relative Humidity’
Note: Evaporative Coolers operate by combining a variable airflow and water evaporation. How much water is used (Water Consumption) depends on the ‘Relative Humidity’ of the day and the fan speed setting to meet the required cooling levels. Relative Humidity (rh) is the ratio of the amount of water (as vapour) actually contained in the air to the maximum amount of water vapour that could be contained at the same temperature (saturation). For example, at 50% rh, the air contains 50% of the maximum (100%) amount of moisture (water vapour) that it could contain at the same temperature. Therefore when the relative humidity level is low all Evaporative Cooling units may consume a more significant amount of water (up to 300% more) than higher relative humidity ratio conditions.
Features
- One-piece moulded polyethylene housing will not crack and is rust and leak proof
- Two freezable ice blocks included to assist in reducing water tank temperatures in warmer conditions
- Environmentally-friendly alternative to traditional reverse cycle A/C
- Cools without chemicals or refrigerants
- Easy to remove cooling pads & filters for quick & easy maintenance
- Long-term dependability-near maintenance-free operation
- European design synchronous swing function
- Cools where traditional cooling methods are impractical or cost-prohibitive
- Easy to read water level sight gauge
- Manual pop-out filler door on front of unit
- Direct drive motor
- LCD 12.5 hour timer panel
- Nylon castors for easy portability
Specifications
- Power Unit: 220V 50Hz 150W 10amp plug
- Operating Current: 1.45A
- Max. Air Flow: 6,000 m3 per hour
- Noise Level: 65dB(A)
- Fan Diameter: 400mm 4-blade propeller
- Speed Control: 3-speed
- Effective Cooling Area: 45-55m2
- Water Consumption; 4-5 Litres per hour
- Water Tank Capacity: 45 Litres
- Dimension: 1185(H) x 620(W) x 430(D)
- Nett Weight: 17kg
- Gross Weight 20kg
NOTE: FREIGHT RATES MAY APPLY!
Intended Use:
This equipment is intended for cooling industrial or trade workshop/office environments. Best used in hot dry climates where the humidity is low, evaporative coolers are generally suitable for areas with dry summers, although their effectiveness will be reduced during the occasional periods of high humidity weather.
This product is an Industrial Product and not suitable for household use.
(0 reviews) -
Fans, Coolers, Heaters & Air ConTQB BRANDS Evaporative Cooler – 200W
With its compact size, this eQuipt “Designed to Deliver” Portable Evaporative Cooling unit is perfectly suited to smaller work spaces, yet still delivers an impressive amount of air output. This easy-to-operate unit produces up to 6,000 cubic metres of airflow per hour. It is fitted with a rugged, weather-resistant one-piece moulded polyethylene housing that will not crack or leak. The remote control 3-speed fan forces warm air over rigid water soaked evaporative cooling media to reduce ambient temperatures by up to 10°C . Adjustable swing louvre feature that offers swinging airflow and allows you to adjust the cooled air output to where you need it.
An evaporative cooler (also known as a desert cooler or wet air cooler) is a device that cools air through the evaporation of water. These units are well suited for climates where the air is hot and humidity is low. They combine the natural cooling properties of water with a steady breeze to lower indoor temperatures. Evaporative cooling will provide a substantial energy savings over refrigerated air units, while the simplicity of the design results in low maintenance requirements.
Compared to other climate control systems available, evaporative air cooling provides the most energy efficient temperature relief for commercial or industrial environments of any scale.
Up to 80% more economical than conventional air conditioning systems, our evaporative cooling systems have delivered proved cost reductions and operational returns for many industrial and mechanical workshops.
With the substantial savings of energy and the constant changes in the air, a portable evaporative cooler is ideally suited for area cooling or spot cooling of rooms, workshops, factories, laundries, schools, agricultural sheds, and more.
Water Consumption can increase by 300% due to ‘Relative Humidity’
Note: Evaporative Coolers operate by combining a variable airflow and water evaporation. How much water is used (Water Consumption) depends on the ‘Relative Humidity’ of the day and the fan speed setting to meet the required cooling levels. Relative Humidity (rh) is the ratio of the amount of water (as vapour) actually contained in the air to the maximum amount of water vapour that could be contained at the same temperature (saturation). For example, at 50% rh, the air contains 50% of the maximum (100%) amount of moisture (water vapour) that it could contain at the same temperature. Therefore when the relative humidity level is low all Evaporative Cooling units may consume a more significant amount of water (up to 300% more) than higher relative humidity ratio conditions.
Features
- One-piece moulded polyethylene housing will not crack and is rust and leak proof
- Environmentally-friendly alternative to traditional reverse cycle A/C
- Cools without chemicals or refrigerants
- Easy to remove cooling pads & filters for quick & easy maintenance
- Long-term dependability-near maintenance-free operation
- European design synchronous swing function
- Cools where traditional cooling methods are impractical or cost-prohibitive
- Easy to read water level sight tube gauge
- Dual pour in refill water inlet and/or 3/4″ hose fitting for automatic tap refill
- Conveniently located drain valve at bottom of tank for easy access
- Direct drive
- LCD 12 hour timer panel
- Nylon castors for easy portability
Specifications
- Power Unit: 220V 50Hz 200W 10amp plug
- Operating Current: 2.4A
- Power Cord Length: 2300mm
- Max. Air Flow: 9,000 m3 per hour
- Noise Level: 70dB(A)
- Speed Control: 3-speed
- Fan Diameter: 520mm 4-blade propeller
- Effective Cooling Area: 50-60m2
- Water Consumption; 5-6 Litres per hour
- Water Tank Capacity: 70 Litres
- Dimension: 1360(H) x 820(W) x 545(D)
- Nett Weight: 33kg
- Gross Weight 36kg
NOTE: FREIGHT RATES MAY APPLY!
Intended Use:
This equipment is intended for cooling industrial or trade workshop/office environments. Best used in hot dry climates where the humidity is low, evaporative coolers are generally suitable for areas with dry summers, although their effectiveness will be reduced during the occasional periods of high humidity weather.
This product is an Industrial Product and not suitable for household use.
(0 reviews) -
Fans, Coolers, Heaters & Air ConTQB BRANDS Evaporative Cooler – 450W
With its compact size, this eQuipt “Designed to Deliver” Portable Evaporative Cooling unit is perfectly suited to smaller work spaces, yet still delivers an impressive amount of air output. This easy-to-operate unit produces up to 6,000 cubic metres of airflow per hour. It is fitted with a rugged, weather-resistant one-piece moulded polyethylene housing that will not crack or leak. The remote control 3-speed fan forces warm air over rigid water soaked evaporative cooling media to reduce ambient temperatures by up to 10°C . Adjustable swing louvre feature that offers swinging airflow and allows you to adjust the cooled air output to where you need it.
An evaporative cooler (also known as a desert cooler or wet air cooler) is a device that cools air through the evaporation of water. These units are well suited for climates where the air is hot and humidity is low. They combine the natural cooling properties of water with a steady breeze to lower indoor temperatures. Evaporative cooling will provide a substantial energy savings over refrigerated air units, while the simplicity of the design results in low maintenance requirements.
Compared to other climate control systems available, evaporative air cooling provides the most energy efficient temperature relief for commercial or industrial environments of any scale.
Up to 80% more economical than conventional air conditioning systems, our evaporative cooling systems have delivered proved cost reductions and operational returns for many industrial and mechanical workshops.
With the substantial savings of energy and the constant changes in the air, a portable evaporative cooler is ideally suited for area cooling or spot cooling of rooms, workshops, factories, laundries, schools, agricultural sheds, and more.
Features
- One-piece moulded polyethylene housing will not crack and is rust and leak proof
- Environmentally-friendly alternative to traditional reverse cycle A/C
- Cools without chemicals or refrigerants
- Long-term dependability-near maintenance-free operation
- European design synchronous swing function
- Cools where traditional cooling methods are impractical or cost-prohibitive
- Easy to read water level sight tube gauge
- Dual pour in refill water inlet and/or 3/4″ hose fitting for automatic tap refill
- Adjustable water flow and drain valve
- Direct drive
- Nylon castors for easy portability
- Remote control speed adjustment
Specifications
- Power Unit: 220-240V 50/60Hz 450W 10amp plug
- Operating Current: 2.1A
- Max. Air Flow: 12,000 m3 per hour
- Noise Level: <70dB(A)
- Speed Control: 3-speed
- Effective Cooling Area: 60-80m2
- Water Consumption; 8-10 Litres per hour
- Water Tank Capacity: 60 Litres
- Dimension: 1430(H) x 900(W) x 560(D)
- Nett Weight: 45kg
- Gross Weight 49kg
NOTE: FREIGHT RATES MAY APPLY!
Water Consumption can increase by 300% due to ‘Relative Humidity’
Note: Evaporative Coolers operate by combining a variable airflow and water evaporation. How much water is used (Water Consumption) depends on the ‘Relative Humidity’ of the day and the fan speed setting to meet the required cooling levels. Relative Humidity (rh) is the ratio of the amount of water (as vapour) actually contained in the air to the maximum amount of water vapour that could be contained at the same temperature (saturation). For example, at 50% rh, the air contains 50% of the maximum (100%) amount of moisture (water vapour) that it could contain at the same temperature. Therefore when the relative humidity level is low all Evaporative Cooling units may consume a more significant amount of water (up to 300% more) than higher relative humidity ratio conditions.
Intended Use:
This equipment is intended for cooling industrial or trade workshop/office environments. Best used in hot dry climates where the humidity is low, evaporative coolers are generally suitable for areas with dry summers, although their effectiveness will be reduced during the occasional periods of high humidity weather.
This product is an Industrial Product and not suitable for household use.
(0 reviews)