Industrial Equipment & Supplies
Showing 3205–3240 of 9019 results
-
GeneratorsITM 7.5KVA Generator Petrol 6000W Peak with Honda GX390 Engine
ITM GX Series generators are powered by high-quality, reliable Honda GX Series 4-stroke engines, ensuring consistent performance and durability for professional use. Equipped with advanced AVR (Automatic Voltage Regulator) technology, these generators provide a clean and stable power supply.
Built to meet the demands of modern tradespeople, these generators feature:
- Powerful 4-stroke OHV engines for dependable power output.
- IP66-rated power outlets for superior protection in tough environments.
- RCD (Residual Current Device) for enhanced electrical safety.
- Low oil sensor to protect the engine from damage.
For peace of mind, every generator comes with:
- 2-year trade warranty.
- 3-year Honda engine warranty.
Whether you’re on a busy construction site or managing a large property, ITM GX Series generators offer the rugged dependability professionals need.
Specifications
7.5KVA 13HP GENERATOR- Max Watts: 6000
- Rated Watts: 5500
- Outlets: 2 x IP66 15A
- Engine Model: GX390
- Engine HP: 13hp
- Noise @ 7m Full Load: 78dB
- Fuel Tank: 25L
- Running Time: 13 Hours
- Starting Method: Recoil
- Handle & Wheel Kit: Yes
- Net Weight: 80kg
(0 reviews) -
GeneratorsITM 8.1KVA Generator Petrol 6500W Peak Electric Start
Features
All ITM generators are equipped with a reliable AVR (automatic voltage regulator) alternator utilising advanced electronic technology to provide a very pure energy supply with a THD (total harmonic distortion) of <5%. This clean and pure output means they are suitable to power even the most delicate electronic devices.- Powerful 4 Stroke OHV engines
- Low Oil Sensor
- Digital Multimeter Display
- Large Capacity Fuel Tanks
- 2 Year Trade Warranty
Specifications
- Engine HP: 15HP
- KVA: 8.1
- Max Watts: 6,500
- Rated Watts: 6,000
- Noise @ 7m Full Load: 79dB
- Outlets: 2 x 15A
- Fuel Tank: 25L
- Running Time – 50% Load: 12 hours
- Starting System: Electric
- Handle & Wheel Kit: Yes
- Frame Dimensions: 69.5cm Long x 54.5cm Wide x 56.5cm High
- Net Weight: 85Kg
(0 reviews) -
GeneratorsITM 8.1KVA Generator Petrol Construction 3500W Peak Electric Start with Remote
All ITM generators are equipped with a reliable AVR (automatic voltage regulator) alternator utilising advanced electronic technology to provide a very pure energy supply with a THD (total harmonic distortion) of <5%. This clean and pure output means they are suitable to power even the most delicate electronic devices.- Powerful 4 Stroke OHV engines
- Low Oil Sensor
- Digital Multimeter Display
- Large Capacity Fuel Tanks
- 2 Year Trade Warranty
The Construction Series models have a simple push button electric start (battery included) with a convenient remote control which is perfect for the large property or worksite where the generator may not be close to the tool being powered.
Complete with a heavy duty handle and wheel kit, IP66 rated power outlets and RCD (Residual Current Device.), the construction series gens are perfect for the professional tradesman needing a tough yet reliable source of power.
Specifications
- Engine HP: 15HP
- KVA: 8.1
- Max Watts: 6,500
- Rated Watts: 6,000
- Noise @ 7m Full Load: 79dB
- Outlets: 2 x IP66 15A
- Fuel Tank: 25L
- Running Time – 50% Load: 12 hours
- Starting System: Electric w/ Remote
- Handle & Wheel Kit: Yes
- Frame Dimensions: 69.5cm Long x 54.5cm Wide x 56.5cm High
- Net Weight: 88Kg
(0 reviews) -
GeneralITM ABM 14 Bevelling Machine
The ABM-14 is a bevelling machine designed to mill plate made of carbon steel, alloy steel, stainless steel or aluminium alloys. In just one single run the machine can bevel up to 2.6 m/min. (8.5 ft/min.) to a width of 12 mm (1/2″) in workpieces with tensile strength of Rm 392 MPa (57,000 psi). Maximum bevel width is 14 mm (9/16″). Depending on materials two or more runs are needed. Bevel angles incl. 30° (standard) and with optional angle variation devices also 22.5°, 25°, 35°, 37.5° or 45°. The machine can bevel plates from the top and bottom. In the case of the milling tool getting stuck in the material and beveling cannot be continued the direction of rotation of the tool can be reversed to release the machine from the workpiece. Hearing protection equipment not required as the noise produced by the machine does not exceed 70 dB.
Features:
- Fast and efficient
- Bevels both small and large pieces to cover most of the common applications for its type.
- Auto feed on large plates with optional trolley.
- Bevelling of lower edge in inverted position.
- Standard shearing cutter for machining carbon steel.
- 2 optional shearing cutters dedicated to stainless/alloyed steel and aluminum.
- Reversible spindle against stuck milling tool. Versatile and transportable on its own trolley.
- Low noise.
Set Includes:
- WA-ABM14 beveller
- Bevelling cutter
- Cutter extraction tool
- Tube beveling shaft
- Tube beveling washer
- Flat wrenches: 12-13mm, 18-19mm, 24-26mm
- Hex wrenches: 5mm and 6mm
- Operator’s manual
(0 reviews) -
GeneralITM ABM-30 Auto Feed Portable Bevelling Machine (-60 to +60 Degree), Max Bevel Width 30mm
Features
The ABM-30 portable bevelling machine performs auto feed beveling on steel plates on top, face and bottom edges.
The beveller needs no track to move along steel plate to produce accurate high-quality double-side bevels without thermal distortion or creation of heat affected zone on plate thickness range 8 – 60mm.
The ABM-30 features an infinitely adjustable bevel angle between -70° and +70° and is capable of producing bevels up to 30mm wide.
It also allows for facing in both directions with the milling head depth of 1mm.- Needs no track to travel in both directions with feed speed up to 2m/min.
- 4 Wheels feed drive eliminates hard physical work of the operator.
- Produces double-side bevels without having to flip the plate enhancing safety and reducing material handling time and expense.
- Edge to edge working range.
- Semi-automatic feed stop at end of the metal sheet.
- Variable spindle speed.
- Bevel width up to 30mm (1-3/16″).
- Variable angle -70° to +70°.
- Max. plate thickness up to 60mm.
- Innovative, robust chip protection solution.
Specifications
- Voltage: 1~ 200-240 V, 50/60 Hz
- Power: 2200W
- Spindle Rotational Speed (Without Load): 1800 – 5850rpm
- Feed Speed: 0 – 2m/min
- Bevel Angle (ß, Fig. 1): From -70° to 70°
- Maximum Bevel Width (b, Fig. 1): 30mm
- Sheet Thickness: 8 – 60mm
- Required Ambient Temperature: 5 – 40°C
- Weight: 43kg
(0 reviews) -
GeneralITM ABM-50 Auto Feed Double Sided Beveller, 415V 4Kw Motor, 15-60° Bevel Angle, Max Bevel Width 50mm, 8-80mm Plate Thickness
Features
The ABM 50 produces accurate high-quality double-sided bevels without thermal distortion or creation of heat affected zone on plate thickness range 8-80 mm (15/16″ – 3 1/8″) using a purpose designed milling head with eight 4-sided indexable cutting inserts. Continuously adjustable bevel angle between 15 and 60 degrees (for both top and bottom beveling) requires no tooling to change.
Key features
- Real-time measurement and on-screen display of exact bevel geometry and cutting parameters
- Bevel width up to 50 mm (2″) at 45 degrees
- 180° Inversion allows for creation of a double-sided bevel – no need to rotate or flip heavy material reduces material handling costs and improves shop safety
- Variable spindle speed for work on a variety of steel grades and thicknesses
- Versatile and transportable on its own trolley
- Equipped with milling head including 8 replaceable inserts
- Feedback-controlled overload system
- Create a double-sided bevel eliminating the need to turn a plate over
Remote Control Panel
LCD display that shows exact bevel geometry as well as enables precise adjustment of spindle speed and feed speed to optimize them depending on material grade incl. stainless steel, aluminum etc. The operator can easily adjust and monitor the following parameters:
- Bevel angle
- Bevel width
- Bevel height
- Depth of cut
- Spindle speed
- Feed rate
- Spindle load
Specifications
Power: 6.5 kW
Spindle speed ( no load ): 300 – 800 rpm
Feed speed: 0-1.2 m/min (47″/min)
Bevel angle: 15-60°
Maximum bevel width: 50mm (2″)
Maximum depth of cut allowed per single pass: 6mm (1/4″)
Plate thickness: 8-80mm (5/16″ – 3-1/8″)
Required ambient temperature: 0-40°C (34-104°F)
Weight: 320 kg (700 lbs)(0 reviews) -
Accessories & PartsITM Adjustable Pin Spanner
Universal Pin Spanner.
Pin centers adjustable from 18mm centers to 39mm centers.
Suits most angle grinders and pneumatic tools.(0 reviews) -
Air ToolsITM Air Hammer
Alloyed steel barrel and heat treated piston.
Built in power regulator and trigger control.
Ergonomic design with soft rubber grip.
Includes 5 piece chisel set.Blows Per Minute: 3,000 BPM
Stroke Length: 66mm
Bore Diameter: 19.05mm
Chisel Shank: 10.2mm
Average Air Consumption: 155 L/min
Overall Length: 260mm
Air Inlet: 1/4″
Weight: 2.2kg(0 reviews) -
Air Spray EquipmentITM Air Spray Gun Gravity Feed
Nozzle Size: 1.4mm & 2.0mm
Air Consumption: 120L/min
Pot Size: 600mL(0 reviews) -
Air Spray EquipmentITM Air Spray Gun Suction Feed
Nozzle Size: 1.4mm & 2.0mm
Air Consumption: 120L/min
Pot Size: 1L(0 reviews) -
Geared Head Drilling MachinesITM Aricas Gear Head Bench Drill, 3m, 415V 3PH
Features
Quality Taiwanese Precision Machine for drilling & tapping.
# 3 Morse Taper Spindle.
1120W Three Phase Motor.
Geared Head Tilts 90° right & left.
Forward and Reverse Operation.
Includes 3MT – J6 arbor with drawbar thread M12 x 1.75
No chuck suppliedSpecifications
Drilling Capacity Cast Iron: 40mm
Drilling Capacity Steel: 32mm
Spindle Taper: #3MT
Spindle Nose to Base: 620mm
Spindle to Colomn: 275mm
Diameter of Column: 110mm
Quill Diameter: 75mm
Quill Travel: 120mm
Swing: 550mm
Head Tilting: 90° Right & Left
Head Swivel: 360°
Spindle Speeds (240v) : 100, 220, 380, 760, 1240, 2500rpm
Spindle Speeds (415v) : 50, 100, 190, 380, 670, 1250rpm
Overall Height: 1075mm
Base Dimensions: 450 x 650mm
N.W. / G.W. : 220 / 245kg
Shipping Dimensions : 800 x 780 x 1120mm(0 reviews) -
Magnetic Base Drill AccessoriesITM Axial Float Tapping Heads
Protection against tap breakage ensured by an ultra sensitive and smooth multi-position operating ball-clutch.
Forward and reverse ball drive design transmits rotational power to the tap and disengages smoothly and silently.
Axial float ensures smooth tapping and better thread profile.
Cushioned drive incorporating compression and extension, eliminates the possibility of cross threading during the tapping process, and ensures clean and accurate threads.
A planetary gear reversing mechanism transmits smooth positive reverse to the tap retraction and it retracts 75% faster than it enters.
Accurate depth control by means of its precise neutral mechanism(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BandsawsITM Bandsaw, 170mm Cap, Swivel Head, 1 Speed 240v 1ph, Hyd Down Feed
Features
- Swivel head enables from 0° to 60° mitre cuts.
- Dual mode operation.
– Trigger switch with manual down feed for small quick cuts.
– Control panel with fully adjustable hydraulic down feed & automatic shut-off at end of cut, for cutting larger material. - Incorporated recirculating coolant system.
- Adjustable material stop for repetitive production.
- Safety emergency stop switch.
- 12 months warranty.
- Comes complete with stand & blade.
- Optional brass chip brush & blade tension gauge.
- Made in Taiwan.
Specifications
Motor 1hp Single Phase (240V) Blade Speed Single Speed 80 mpm Blade Size 19mm x 0.9mm x 2110mm Bed Height 895mm Weight 156kg Cutting Capacity Cutting Angle Round Square Rectangle 90° 170mm 170mm 210 x 100mm 45° Right 120mm 110mm  60° Right 70mm 60mm  (0 reviews) -
Bandsaws
ITM Bandsaw, 170mm Cap, Swivel Head, 2 Speed 415v 3ph, Hyd Down Feed
Features
- Swivel head enables from 0° to 60° mitre cuts.
- Dual mode operation.
– Trigger switch with manual down feed for small quick cuts.
– Control panel with fully adjustable hydraulic down feed & automatic shut-off at end of cut, for cutting larger material. - Incorporated recirculating coolant system.
- Adjustable material stop for repetitive production.
- Safety emergency stop switch.
- 12 months warranty.
- Comes complete with stand & blade.
- Optional brass chip brush & blade tension gauge.
- Made in Taiwan.
Specifications
Motor 1hp Three Phase (415V) Blade Speed 2 Speed 40 / 80 mpm Blade Size 19mm x 0.9mm x 2110mm Bed Height 895mm Weight 156kg Cutting Capacity Cutting Angle Round Square Rectangle 90° 170mm 170mm 210 x 100mm 45° Right 120mm 110mm  60° Right 70mm 60mm  (0 reviews) -
BandsawsITM Bandsaw, 170mm Cap, Swivel Head, Variable Speed 240v 1ph, Hyd Down Feed
Features
UNIQUE WG SERIES FEATURES:- Variable speed
- Control panel at front of saw
- Swivel head lock lever at front of saw
STANDARD FEATURES:
- 1 Way swivel head 0° to 60°
- Dual mode operation
- Manual trigger switch, or
- Control panel with hydraulic downfeed
- Industrial quality made in Taiwan
Specifications
Motor 1hp Single Phase (240V) Blade Speed Variable 20-85 mpm Blade Size 19mm x 0.9mm x 2110mm Weight 150kg Cutting Capacity Rectangular 90° 210 x 100mm Square 90° 170 x 170mm Square 45° 110 x 110mm (0 reviews) -
BandsawsITM Bandsaw, 180mm Cap, 4 Speed, 240v 1ph, Horizontal & Vertical Cut
Features
- Horizontal & vertical cutting bandsaw.
- Quick positioning swivel vice enables cuts from 0° to 45°.
- Fully adjustable hydraulic down feed with separate on/off valve & automatic shut-off at end of cut.
- Incorporated recirculating coolant system.
- Non-voltage return ON/OFF switch & emergency stop switch.
- 4 Blade speeds allows precise cutting of different materials.
- Brass chip brush to help extend blade life.
- Adjustable material stop for repetitive production.
- Fitted on base with wheels for easy manoeuvring.
- 12 months warranty.
- Comes complete with blade.
- Made in Taiwan.
Specifications
Motor 1hp Single Phase (240V) Blade Speed 4 Speed 22 / 33 / 45 / 65mpm Blade Size 19mm x 0.9mm x 2360mm Bed Height 572mm Weight 130kg Cutting Capacity Cutting Angle Round Square Rectangle 90° 180mm 180mm 300 x 180mm 45° Right 110mm 110mm 120 x 115mm (0 reviews) -
BandsawsITM Bandsaw, 220mm Cap, Swivel Head, 1 Speed 240v 1ph, Hyd Down Feed
Features
- Swivel head enables from 0° to 60° mitre cuts.
- Dual mode operation.
– Trigger switch with manual down feed for small quick cuts.
– Control panel with fully adjustable hydraulic down feed & automatic shut-off at end of cut, for cutting larger material. - Incorporated recirculating coolant system.
- Brass chip brush to help prevent blade breakage.
- Adjustable material stop for repetitive production.
- Safety emergency stop switch.
- 12 months warranty.
- Comes complete with stand & blade.
- Optional blade tension gauge.
- Made in Taiwan.
Specifications
Motor 1.5hp Single Phase (240V) Blade Speed Single Speed 72 mpm Blade Size 27mm x 0.9mm x 2460mm Bed Height 840mm Weight 216kg Cutting Capacity Cutting Angle Round Square Rectangle 90° 220mm 215mm 260 x 110mm 45° Right 150mm 145mm 155 x 110mm 60° Right 90mm 85mm 95 x 80mm (0 reviews) -
Bandsaws
ITM Bandsaw, 220mm Cap, Swivel Head, 2 Speed 415v 3ph, Hyd Down Feed
Features
- Swivel head enables from 0° to 60° mitre cuts.
- Dual mode operation.
– Trigger switch with manual down feed for small quick cuts.
– Control panel with fully adjustable hydraulic down feed & automatic shut-off at end of cut, for cutting larger material. - Incorporated recirculating coolant system.
- Brass chip brush to help prevent blade breakage.
- Adjustable material stop for repetitive production.
- Safety emergency stop switch.
- 12 months warranty.
- Comes complete with stand & blade.
- Optional blade tension gauge.
- Made in Taiwan.
Specifications
Motor 1.5hp Three Phase (415V) Blade Speed 2 Speed 36 / 72 mpm Blade Size 27mm x 0.9mm x 2460mm Bed Height 840mm Weight 216kg Cutting Capacity Cutting Angle Round Square Rectangle 90° 220mm 215mm 260 x 110mm 45° Right 150mm 145mm 155 x 110mm 60° Right 90mm 85mm 95 x 80mm (0 reviews) -
BandsawsITM Bandsaw, 220mm Cap, Swivel Head, Variable Speed 240v 1ph, Hyd Down Feed
Features
UNIQUE WG SERIES FEATURES:- Variable speed
- Control panel at front of saw
- Swivel head lock lever at front of saw
STANDARD FEATURES:
- 1 Way swivel head 0° to 60°
- Dual mode operation
- Manual trigger switch, or
- Control panel with hydraulic downfeed
- Industrial quality made in Taiwan
Specifications
Motor 1.5hp Single Phase (240V) Blade Speed Variable 20-85 mpm Blade Size 27mm x 0.9mm x 2460mm Weight 195kg Cutting Capacity Rectangular 90° 210 x 140mm Square 90° 215 x 215mm Square 45° 150 x 150mm (0 reviews) -
BandsawsITM Bandsaw, 227mm Cap, Swivel Head, Dual Mitre, 1 Speed 240v 1ph, Hyd Down Feed
Features
- 2-way swivel head enables from 0° to 60° mitre cuts.
- Dual mode operation.
– Trigger switch with manual down feed for small quick cuts.
– Control panel with fully adjustable hydraulic down feed & automatic shut-off at end of cut, for cutting larger material. - Dual direction heavy-duty vice.
- Incorporated recirculating coolant system.
- Brass chip brush to help prevent blade breakage.
- Adjustable material stop for repetitive production.
- Safety emergency stop switch.
- 12 months warranty.
- Comes complete with stand & blade.
- Optional blade tension gauge.
- Made in Taiwan.
Specifications
Motor 1.5hp Single Phase (240V) Blade Speed Single Speed 72 mpm Blade Size 27mm x 0.9mm x 2460mm Bed Height 900mm Weight 285kg Cutting Capacity Cutting Angle Round Square Rectangle 90° 220mm 215mm 260 x 105mm 45° Right 150mm 145mm 155 x 70mm 60° Right 90mm 85mm 90 x 80mm 45° Left 135mm 110mm 160 x 45mm (0 reviews) -
Bandsaws
ITM Bandsaw, 227mm Cap, Swivel Head, Dual Mitre, 2 Speed 415v 3ph, Hyd Down Feed
Features
- 2-way swivel head enables from 0° to 60° mitre cuts.
- Dual mode operation.
– Trigger switch with manual down feed for small quick cuts.
– Control panel with fully adjustable hydraulic down feed & automatic shut-off at end of cut, for cutting larger material. - Dual direction heavy-duty vice.
- Incorporated recirculating coolant system.
- Brass chip brush to help prevent blade breakage.
- Adjustable material stop for repetitive production.
- Safety emergency stop switch.
- 12 months warranty.
- Comes complete with stand & blade.
- Optional blade tension gauge.
- Made in Taiwan.
Specifications
Motor 1.5hp Three Phase (415V) Blade Speed 2 Speed 36 / 72 mpm Blade Size 27mm x 0.9mm x 2460mm Bed Height 900mm Weight 285kg Cutting Capacity Cutting Angle Round Square Rectangle 90° 220mm 215mm 260 x 105mm 45° Right 150mm 145mm 155 x 70mm 60° Right 90mm 85mm 90 x 80mm 45° Left 135mm 110mm 160 x 45mm (0 reviews) -
BandsawsITM Bandsaw, 240mm Cap, Swivel Head, Dual Mitre, 2 Speed 415v 3ph, Hyd Down Feed
Features
- 2-way swivel head enables from 0° to 60° mitre cuts.
- Dual mode operation.
– Trigger switch with manual down feed for small quick cuts.
– Control panel with fully adjustable hydraulic down feed & automatic shut-off at end of cut, for cutting larger material. - Variable speed motor for cutting a wide range of materials.
- Dual direction heavy-duty vice.
- Hydraulic blade tension gauge.
- Incorporated recirculating coolant system.
- Brass chip brush to help prevent blade breakage.
- Adjustable material stop for repetitive production.
- Safety emergency stop switch.
- 12 months warranty.
- Comes complete with stand & blade.
- Made in Taiwan.
Specifications
Motor 2hp Three Phase (415V) Blade Speed 2 Speed 36 / 72 mpm Blade Size 27mm x 0.9mm x 2725mm Bed Height 895mm Weight 302kg Cutting Capacity Cutting Angle Round Square Rectangle 90° 240mm 235mm 310 x 165mm 45° Right 195mm 185mm 195 x 130mm 60° Right 120mm 85mm 120 x 90mm 45° Left 165mm 140mm 195 x 60mm (0 reviews) -
BandsawsITM Bandsaw, 260mm Cap, Swivel Head, Dual Mitre, 2 Speed 415v 3ph, Hyd Down Feed
Features
- 2-way swivel head enables from 0° to 60° mitre cuts.
- Dual mode operation.
– Trigger switch with manual down feed for small quick cuts.
– Control panel with fully adjustable hydraulic down feed & automatic shut-off at end of cut, for cutting larger material. - Dual direction heavy-duty vice.
- Hydraulic blade tension gauge.
- Incorporated recirculating coolant system.
- Brass chip brush to help prevent blade breakage.
- Adjustable material stop for repetitive production.
- Safety emergency stop switch.
- 12 months warranty.
- Comes complete with stand & blade.
- Made in Taiwan.
Specifications
Motor 2hp Three Phase (415V) Blade Speed 2 Speed 36 / 72mpm Blade Size 27mm x 0.9mm x 3160mm Bed Height 890mm Weight 410kg Cutting Capacity Cutting Angle Round Square Rectangle 90° 260mm 260mm 350 x 250mm 45° Right 230mm 165mm 240 x 110mm 60° Right 150mm 90mm 150 x 90mm 45° Left 200mm 170mm 260 x 60mm (0 reviews) -
BandsawsITM Bandsaw, 260mm Cap, Swivel Head, Dual Mitre, 2 Speed 415v 3ph, Semi Automatic
Features
- 2-way swivel head enables from 0° to 60° mitre cuts.
- Semi-automatic machine.
- Dual direction heavy-duty vice.
- Hydraulic blade tension gauge.
- Incorporated recirculating coolant system.
- Brass chip brush to help prevent blade breakage.
- Adjustable material stop for repetitive production.
- Remote emergency stop non-voltage return safety switch.
- 12 months warranty.
- Comes complete with stand & blade.
- Made in Taiwan.
Specifications
Motor 2hp Three Phase (415V) Blade Speed 2 Speed 36 / 72mpm Blade Size 27mm x 0.9mm x 3160mm Bed Height 890mm Weight 530kg Cutting Capacity Cutting Angle Round Square Rectangle 90° 260mm 260mm 350 x 250mm 45° Right 230mm 165mm 240 x 110mm 60° Right 150mm 90mm 150 x 90mm 45° Left 200mm 170mm 260 x 60mm (0 reviews) -
Grinding MachinesITM Belt Grinder 1.5Kw 240V 1PH With Stand Belt Size 100 x 1500mm
Features
Quality, durable construction.
Made in Taiwan.
240 Volt Industrial Motor.
Smooth, low vibration operation.
Large sturdy base.Specifications
Motor: 1.5KW Single Phase 240V
Contact Wheel: 170 X 100mm
Platen Surface: 405 X 100mm
Grinding Belt: 1500 X 100mm(0 reviews) -
Belt Drive Drilling MachinesITM Bench Drill H.D 2m, 16mm Chuck 12 Speed 17″ Swing, .75Kw, 240V
Features
Extra heavy duty industrial drilling machine range. Made in Taiwan, these machines are equipped with heavy duty casting and construction for provenlasting durability in industrial workshops.Supplied With:.
– Drill Chuck & Arbor.
– Drill DriftSpecifications
Drilling Capacity: 23mm (7/8″)
Chuck: 16mm #2MT
Motor Power: 750W 240V
Spindle Travel: 85mm
Speed: 12 Spd 290-2330
Swing: 430mm
Table Size: ,350mm
Base Size: 505x278mm
Column Diameter: 80mm
Height: 1010mm
Weight : 72kg(0 reviews) -
Power ToolsITM Bench Drill Press
Quality casting, construction & componentry.
Emergency stop.
NVR safety switch.Each Unit Supplied With:.
Chuck safety guard.
Drill chuck & arbor.
Drill drift (on MT models)Drilling Capacity (mm): 16mm (5/8″)
Spindle Taper: #2MT
Chuck: 3-16mm B16
Motor Power: 375W 240V
Spindle Travel (mm): 85
Speed: 16 Speed 180-2770
Swing (mm): 325
Table Size / Base Size (mm): 290 / 420×250
Column Diameter (mm): 72
Height (mm): 980
N.W. / G.W. (kg): 43 / 45Drill press vice to suit: VDP102
Cross slide vice to suit: TM130-100(0 reviews) -
Belt Drive Drilling MachinesITM Bench Drill Press, 13mm Cap, 5 Speed, 210mm Swing, 250W 240V
Features
Quality casting, construction & componentry.
Emergency stop.
NVR safety switch.Each Unit Supplied With:.
Chuck safety guard.
Drill chuck & arbor.
Drill drift (on MT models)Specifications
Drilling Capacity (mm): 13mm (1/2″)
Chuck: 1.5-13mm B16
Motor Power: 250W 240V
Spindle Travel (mm): 50
Speed: 5 Speed 620-2620
Swing (mm): 210
Table Size / Base Size (mm): 160×160 / 290×190
Column Diameter (mm): 46
Height (mm): 580
N.W. / G.W. (kg): 15.5 / 16.5Drill press vice to suit: VDP078
(0 reviews) -
Belt Drive Drilling MachinesITM Bench Drill Press, 13mm Cap, 5 Speed, 260mm Swing, 375W 240V
Features
Quality casting, construction & componentry.
Emergency stop.
NVR safety switch.Each Unit Supplied With:.
Chuck safety guard.
Drill chuck & arbor.
Drill drift (on MT models)Specifications
Drilling Capacity (mm): 13mm (1/2″)
Chuck: 1.5-13mm B16
Motor Power: 375W 240V
Spindle Travel (mm): 65
Speed: 5 Speed 620-2620
Swing (mm): 260
Table Size / Base Size (mm): 200×200 / 340×210
Column Diameter (mm): 58
Height (mm): 680
N.W. / G.W. (kg): 23.3 / 25.3Drill press vice to suit: VDP078
Cross slide vice to suit: TM130-100(0 reviews) -
Belt Drive Drilling MachinesITM Bench Drill Press, 2m, 16mm Cap, 16 Speed, 325mm Swing, 375W 240V
Features
Quality casting, construction & componentry.
Emergency stop.
NVR safety switch.Each Unit Supplied With:.
Chuck safety guard.
Drill chuck & arbor.
Drill drift (on MT models)Specifications
Drilling Capacity (mm): 16mm (5/8″)
Spindle Taper: #2MT
Chuck: 3-16mm B16
Motor Power: 375W 240V
Spindle Travel (mm): 85
Speed: 16 Speed 180-2770
Swing (mm): 325
Table Size / Base Size (mm): 290 / 420×250
Column Diameter (mm): 72
Height (mm): 980
N.W. / G.W. (kg): 43 / 45Drill press vice to suit: VDP102
Cross slide vice to suit: TM130-100(0 reviews) -
Belt Drive Drilling MachinesITM Bench Drill Press, 2m, 16mm Cap, 16 Speed, 360mm Swing, 450W 240V
Features
Quality casting, construction & componentry.
Emergency stop.
NVR safety switch.Each Unit Supplied With:.
Chuck safety guard.
Drill chuck & arbor.
Drill drift (on MT models)Specifications
Drilling Capacity (mm): 16mm (5/8″)
Spindle Taper: #2MT
Chuck: 3-16mm B16
Motor Power: 450W 240V
Spindle Travel (mm): 85
Speed: 16 Speed 180-2770
Swing (mm): 360
Table Size / Base Size (mm): 290×290 / 460×272
Column Diameter (mm): 72
T-Slot Size: 16mm
Height (mm): 1000
N.W. / G.W. (kg): 51 / 54Drill press vice to suit: VDP102 or VDP150
Cross slide vice to suit: TM130-100(0 reviews) -
Grinding MachinesITM Bench Grinder 240V, 370W, 150mm
Features
Powerful 370W induction motor.
25mm width grinding wheels with 36 & 60 grit for fast removal of material.
Cast iron body and base for long lasting performance.
Vibration absorbing pads on base for smoother operation.
Capacitor Start-Run motor for maximum performance.
Fully adjustable tool rests for ease of use and maximum user control.
Large eye shields for increased user safety.Specifications
Motor Power: 370W
Speed: 2980RPM
Wheel Size: 150mm x 25mm
Spindle Thread: M12 x 1.75mm
Weight: 11.1kg(0 reviews) -
Grinding MachinesITM Bench Grinder 240V, 600W, 200mm
Features
Powerful 600W Induction Motor.
25mm width grinding wheels with 36 and 60 grit for fast removal of material.
Cast iron body and base for long lasting performance.
Vibration absorbing pads on base for smoother running.
Capacitor Start-Run motor for maximum performance.
Heavy Duty tool rests for maximum user control.
Large eyes shields for increased user safety.Specifications
Motor Power: 600W
Speed: 2980RPM
Wheel Size: 200mm x 25mm
Spindle Thread: M16 x 2mm
Weight: 16.7kg(0 reviews) -
Grinding Machines
ITM Bench Grinder 240V, 900W, 250mm
Features
Powerful 900W induction motor.
25mm width grinding wheels with 36 & 60 grit for fast removal of material.
Cast iron body and base for long lasting performance.
Vibration absorbing pads on base for smoother operation.
Capacitor Start-Run motor for maximum performance.
Fully adjustable tool rests for ease of use and maximum user control.
Large eye shields for increased user safety.Specifications
Motor Power: 900W
Speed: 2980RPM
Wheel Size: 250mm x 25mm
Spindle Thread: M16 x 2mm
Weight: 32kg(0 reviews) -
Grinding MachinesITM Bench Grinder 415V, 3 Phase, 900W, 250mm
Features
- Powerful 900W induction motor
- 25mm width grinding wheels with 36 & 60 grit for fast removal of material
- Cast iron body and base for long lasting performance
- Vibration absorbing pads on base for smoother operation
- Capacitor Start-Run motor for maximum performance
- Fully adjustable tool rests for ease of use and maximum user control
- Large eye shields for increased user safet
Specifications
- Powerful 900W induction motor
- 25mm width grinding wheels with 36 & 60 grit for fast removal of material
- Cast iron body and base for long lasting performance
- Vibration absorbing pads on base for smoother operation
- Capacitor Start-Run motor for maximum performance
- Fully adjustable tool rests for ease of use and maximum user control
- Large eye shields for increased user safet
(0 reviews) -
Grinding MachinesITM Bench Grinder Stand
Features
Bench Grinder Stand for use with TM400-150, TM400-200, TM400-250, TM402-200Specifications
Height: 760mm
Weight: 11.5g(0 reviews)