Industrial Equipment & Supplies
Showing 3169–3204 of 10231 results
-
Diagnostic ToolsINSTRUMENT CHOICE Scarlet Heat Stress Detector
IC-TWL-1SPlease note; These units do not come with formal calibration certificates, if required please contact us to ensure the correct certificate can be provided.Features:– Dash board: Colorful LCD backlight tells you the risk level based on the TWL value. Work-rest schedule and fluid intake are integrated into the display. A countdown timer shows the time remaining before a recommended rest.
– Cup anemometer captures winds from any direction. You do not have to manually decide the wind direction before measuring the wind speed. Compared to the impeller, wind cup is not restricted to the direction of the wind. It considers all the horizontal components of winds that move the anemometer. A silicone pad covers the top of the bearing to prevent it from dust accumulation.– Data Logger : TWL-1S can record data with configurable sampling rate. PC side software helps download the data for further analysis using other analytical tools, and it also synchronizes the date and time of the device with PC.– Optimised Globe: TWL theory considers Mean Radiant Temperature (MRT), the most important parameter governing human energy balance. MRT can be derived from globe temperature (GT) measured by the black-bulb thermometer. The smaller the surface area of the black bulb, the greater the effect of the air temperature and air velocity is, thus causing inaccuracy of the calculation of MRT. Therefore, it needs a modifying formula to adjust it to the standard globe bulb with a diameter of 15 cm. The 7.5 cm globe bulb is the optimal size for a portable based on our research and experiments.– Sensor Protection : Delicate temperature and humidity sensor are well protected by a replaceable polypropylene (PP) filter in a solid shield, exempted the sensors from dust damage and external strike. A silicone pad protects the mechanism of anemometer from dust.Measurement specifications:– Air Temperature (Range): 0-60 C
– Air Temperature (Accuracy): 0.6 C– Globe Bulb Indoor (Range) 0-80 C– Globe Bulb Indoor (Accuracy): 1.0 C (15…40 C); 1.5 C (others)– Globe Bulb Outdoor (Range): 0-80 C– Globe Bulb Outdoor (Accuracy): 1.5 C (15…40 C); 2.0 C (others)– Relative Humidity (Range): 5-95 %rh– Relative Humidity (Accuracy): 3% (at 25 C; 10…90 %rh) 5% (others)– Wind Speed (Range): 0.5 – 10 m/s– Wind Speed (Accuracy): (2% of reading + 0.2) m/sMeter specifications:– Operating range electronics: -1060 C
– Accuracy at 23 5 C: 1.0 %rh / 0.2 K– Power supply / consumption: 4 AAA 3V battery, power supply 4 mA consumption without lighting– Probe protection: Polypropylene plastic cage– Calibration / adjustment: Scarlet calibration kit– Measurement interval: 2 seconds– Back-light: with Back-light– Alarm indicators: Yes– Battery indicator: Low Batt. Display– Software: Scarlet TWLIT– Risk level indicator: Yes. 3 color LCD backlight: red (risk), yellow (med), green (safe)– Data logger: Yes. Min data rate 10 min, 2,000 data.– Connection Interface: Mini USB (UART)– Enclosure material: ABS(0 reviews) -
Diagnostic ToolsINSTRUMENT CHOICE Waterproof Pocket Wind Meter (Anemometer)
Kestrel-1000
Please note: These units will come with a “Certificate of Conformance” from Kestrel, however, in general this does not constitute a formal calibration certificate.The Kestrel 1000 Pocket Wind Meter was the original meter of this type, and it is still going strong. Users will receive accurate current wind speed, average wind speed and maximum wind gust reports while on the go. The only thing that has changed about this reliable model over the years is the aesthetics of the unit.The Kestrel 1000 can easily be switched between mph, km/h, ft/min, m/s, knots and Beaufort measurements. The meter features a one inch impeller mounted on a sapphire jewel bearing to ensure that it starts running at the slightest hint of air.The unit comes with a protective case, a Kestrel Certificate of Conformity, a neck lanyard and a five year manufacturer’s warranty.6 Year Warranty (5 Year Manufacturer Warranty + Bonus 1 Year Instrument Choice Warranty)
What does the Kestrel-1000 Measure?– Current Wind Speed
– Average Wind Speed– Maximum Wind Gust
Features:– Aviation green electroluminescent back light
– Stores maximum and average recordings– Auto shut down after 45 minutes with no activity– One touch clear and reset– Assembled in the U.S.– Data Hold Function– Large LCD screen– Protective Cover– Waterproof and floats– Patented user-replaceable impeller– Neck lanyard
Specifications:– Wind Speed Range: 0.4 to 60.0 m/s, 59 to 11,948 ft/min, 1.0 to 218.0 km/h, 0.8 to 135.0 mph, 0.6 to 118.3 kt and 0 to 12 B
– Display updates every second– Accuracy Rating: Within three percent– Operational Temperature: -10C to 50 C
Power Requirements:– CR2032
Dimensions:– 122 mm x 42 mm x 18 mm(0 reviews) -
Diagnostic ToolsINSTRUMENT CHOICE WBGT Heat Stress Meter
IC800036Please note: These units do not come with formal calibration certificates, if required please contact us to ensure the correct certificate can be provided.Measure heat stress in the field
Benefits and Features:
15 Second Response Time
Audible Alarm
Adjustable to your WBGT Threshold
Indoor/Outdoor Settings
Tripod ThreadsGovernment organizations such as OSHA have set recommended heat stress limits for various activities. WBGT (Wet Bulb Globe Temperature) provides the most accurate determination of the heat stress index based on the cumulative effect of air temperature, air movement, relative humidity, and radiant heat. WBGT Heat Stress Meter IC800036 is a light-weight meter compact enough to carry anywhere to avoid heat exhaustion in public health, sports, military and industrial activities. Highly accurate readings with a typical response time of only 15 seconds. Provides settings for both indoor and outdoor activity and includes an audible alarm, adjustable to your WBGT threshold. Can be mounted on standard camera tripod (not supplied).
Globe diameter: 40 mm
Meter dim: 255 50 30 mm
Weight: 126 g(0 reviews) -
Diagnostic ToolsINSTRUMENT CHOICE WBGT Meter with Color-Coded LCD
IC-801038This unique heat stress meter features bright multi-color LCD backlights corresponding to OSHA’s heat stress alert levels. This visual alert system can be seen at a distance allowing management and workers to be instantly aware when the heat index enters potentially dangerous zones.The 801038 also calculates heat stress values for direct sunlight and shade and displays humidity, maximum and minimum ambient (TA) and black globe (TG) temperatures. Also indicates low battery and a hold function. Comes complete with clear instructions, integrated tripod screw and 4 AAA batteries.SpecificationsAmbient Air temperature:– Range: 0 to 50 C (32 to 122 F)
– Resolution: 0.1– Accuracy: +/- 0.6 C (1.5 F)Globe Temperature:– Range: 0 to 80 C (32 to 176 F)
– Resolution: 0.1– Accuracy: +/- 1 C at 15 to 40 C; +/- 2 C outside this rangeRelative Humidity:– Range: 5 to 90%
– Resolution: 0.1– Accuracy: +/- 4%WBGT:– Range: 0 to 50 C (32 to 122 F)
– Resolution: 0.1– Accuracy: +/- 1 C at 15 to 40 C; +/- 2 C outside this range(0 reviews) -
Diagnostic ToolsINSTRUMENT CHOICE WindLog – Wind Data Logger
ICWindlogThe WindLog is a compact wind data logger designed to accurately measure and record wind speed, direction, and gust for optimizing turbine placement and performance. Includes WindSoft free software package to generate statistics, graphs, and reports.The WindLog samples data every second and stores both average and gust readings at the user-selected interval. User selectable logging intervals range from 1-minute to 1-hour. The 2 MB memory can record for over three months at a 1-minute rate and store over a years worth of wind data at a 10-minute logging interval.The Mini-Aervane wind sensor is equipped with low friction race bearings. This reduces the threshold to approximately 1 mile per hour. Wind extension cables that separate the wind sensor from the WindLog are available in 50-foot or 100-foot length. The wind direction sensor has a 16-point resolution. Logged direction readings are averaged readings.The data logger operates on 3 AA Alkaline or Lithium batteries. Batteries are not included. Lithium batteries are recommended for cold environments. The typical life should be around six months. When connected to a computer, the WindLog will use the USB ports power to run, further extending the battery life. The WindLog ships with a 15-foot USB cable.Each WindLog ships with a free Windows-based application, WindSoft. The software uses an SQLite database to track and record wind information. While connected, WindSoft will update the database every minute. Downloaded data is integrated into the database. By combining both logged and real-time data, the WindLog can be used both online and offline. It also can export CSV files for use with Microsoft Excel or any other application that supports CSV files.The WindLog includes a support mast that can be used with the RainWise Mono Mount and Tripod. The mast may also be attached to a support structure using U-bolts or lag screws.3 Year Warranty (2 Year Manufacturer Warranty + Bonus 1 Year Instrument Choice Warranty)Wind Log Features:– 2MB flash memory data logger– Mini-Aervane wind sensor– WindSoft free software package– Support mast– 15-ft USB Cable(0 reviews) -
Diagnostic ToolsINSTRUMENT CHOICE Wireless Vantage Pro 2™ Plus With Standard Radiation Shield and Weatherlink Live Console
IC-6262AU
A wireless weather station with a versatile sensor suite that combines our rain collector, temperature and humidity sensors and anemometer into one package. You can customize your Vantage Pro 2 by adding consoles or the special-purpose options. First and only weather station in its class to use frequency hopping spread spectrum radio technology to transmit weather data wirelessly up to 1,000 ft (300 m).6262AU Key Benefits:– Get notified about accurate weather updates in real-time that updates every 2.5 seconds
– Transmission range of 300 meters from the sensor suite to the console.– Sensor suite includes outside temperature and humidity sensors in passive radiation shield.
– Also includes wind speed and direction; rainfall; and UV and Solar radiation sensorsThe WeatherLink ConsoleThe WeatherLink Console is a powerful data display, storage, and analysis tool that can be used to view data from up to 8 transmitting sensors or sensor suites in one location. It can be used without Wi-Fi, but it can also be connected to Wi-Fi to join the WeatherLink community and upload and share data safely and securely.The WeatherLink Console allows you to build your own custom dashboard that is customised to the environment you are monitoring. You can see today’s forecast when you wake up, check the latest conditions as you head outdoors, view, analyze, and share weather data on the largest global network of personal weather stations, and connect your data to smart irrigation systems or connect to Amazon Alexa and Google Assistant to ask for the latest conditions.Here are some of the key features of the WeatherLink Console:-See data from up to 8 transmitting sensors or sensor suites in one location.-Choose from 80+ sensors to customise your own personal weather network.-Build your own custom dashboard.-See today’s forecast when you wake up and check the latest conditions as you head outdoors.-View, analyse, and share weather data on the largest global network of personal weather stations.-Connect your data to smart irrigation systems or connect to Amazon Alexa and Google Assistant to ask for the latest conditions.The WeatherLink Console is a powerful tool that can be used to monitor and analyze weather data. It is a great option for those who want to track weather conditions in their home, garden, or business.2 Year Warranty (1 Year Manufacturer Warranty + Bonus 1 Year Instrument Choice Warranty)6262AU Features– Industry leading transmission distance of 300m line of sight.– Anemometer cable at a length of 12m to allow for perfect placement.– Both Solar and UV sensors– WeatherLink Console offers connectivity to push data online to weatherlink.com– Fast updates every (2.5 seconds)– Touchscreen interactive displayStandard package includes:Solar powered Integrated Sensor Suite, Rain Collector, Temperature and humidity sensors, Anemometer with 12m cable, Solar panel, WeatherLink Console, Power adaptor for the console, Mounting hardware and Solar and UV sensors.(0 reviews) -
Diagnostic ToolsINSTRUMENT CHOICE WR-3 Plus Wireless Anemometer Kit
WR3PKit
The WR-3 Plus Wireless Anemometer is a reliable and stable solution for measuring wind speed in a variety of industries, including construction, marine, film production, scaffolding, and wind farms. With a range of up to 500m, this wireless anemometer offers real-time measurement of wind speed, temperature, and air pressure.One of the key features of the WR-3 Plus is its instant wind speed alarm. Users can set a wind speed warning limit based on local operation safety standards, and the device will trigger an audible and visual alarm if the limit is reached. This feature is especially important in the construction and crane industries, where windy conditions can pose a potential danger to workers and equipment. With the WR-3 Plus, multiple stakeholders can be notified on-site through the device’s unique wireless address and connection to several displays.– Ultra-long wireless transceiver range of up to 500m
– Audible and visual wind speed alarm– Data recording for up to 1 year– Measurements for wind speed, temperature, and air pressure– Sensor battery life of up to 3 years– Waterproof and impact resistant design with an IP67 rating– Fast and secure magnetic installation kitIn addition to its real-time measurement capabilities, the WR-3 Plus also offers data recording for up to 1 year. This is made possible by the device’s 64MB built-in memory and impressive battery life. The recorded data can be easily exported in Excel format for further analysis, making it a valuable tool for tracking and improving safety measures in various industries.The WR-3 Plus also boasts a user-friendly interface with a large, backlit LCD display. This display clearly indicates live weather data in various units of measurement, including live wind speed, average wind speed (with selectable averaging), maximum wind speed, ambient temperature, and atmospheric pressure. Users can also view hourly wind records and historical bar charts from the past 12 hours on different pages.– Large LCD backlit display with user-friendly interface
– Ability to view live wind speed in various units of measurement– Option to view average wind speed with selectable averaging– Ability to view maximum wind speed– Ability to view ambient temperature– Beaufort bar graph for visual representation of wind strength– Wind chill calculation for temperature and wind speed combination– Atmospheric pressure displayOther features of the WR-3 Plus include its fast and secure magnetic installation kit, IP67 waterproof and impact resistant design, and up to 3 years of sensor battery life. Overall, the WR-3 Plus is a reliable and essential tool for ensuring safety in windy conditions and a variety of industries.
Warranty: 2 Years (1 Year Manufacturer Warranty + Bonus 1 Year Instrument Choice Warranty)
Applications include:– Construction and cranes
– Marine, ports, and offshore operations– Film production and outdoor entertainment– Scaffolding and temporary structure use– Rigging and communications industry– Wind farms and turbines
SpecificationsWind Speed Sensor:– Unit: m/s, knots, MPH, km/hr
– Range: 0.3 to 50 m/s– Resolution: 0.1 m/s/0.1 knots/0.1 MPH/0.1 km/hr– Accuracy: 2% FS
Temperature Sensor:– Unit: C/F
– Range: -30C to 60C– Resolution: 0.1C/0.1F– Accuracy: 1C
Atmospheric Pressure Sensor:– Unit: hPa/mmHg/bar
– Range: 500 to 1100 hPa– Resolution: 1 hPa/0.1 mmHg/0.001 bar– Accuracy: 4 hPa
Wireless Sensor:– Frequency: 868MHz(default), 915MHz
– Distance: Max 500m* (depends on the applied environment)– Data rate: Every 2 seconds– Power supply: 1x 3.6V 18505 Lithium battery– Waterproof rating: IP67– Weight: 406g– Dimensions: 262.5 x 183.5 x32mm
Data Logger:– Receiver buzzer: > 80dB
– Built-in memory: 64MB– Output: .xlxs, .xls– Data logger” wind speed, temperature, atmospheric pressure– Logging interval: 2s, 5s, 10s, 1min, 5 mins, 10 mins, 60 mins– Power supply: 3x 1.5V AA battery, Micro USB port– Dimensions: 189.6 x 75.6 x 36.3mm– Weight: 205g(0 reviews) -
Attachments & TipsIOXYGEN MG-241 Torch Handle
- 08Aluminum coated handle for less weight & more comfort
- Two stainless steel needle valves for precise flame adjustment and better durability
- Two separate gas tubes for safety
- Forged brass head and body for added strength and durability
MODEL MG-241 RECOMMENDED TORCH HANDLE MG-242 (0 reviews) -
Attachments & TipsIOXYGEN MG-242 Cutting Attachment
- Forged brass head and body for added strength and durability
- Double O-ring seal for quick hand tight connection and leak free
- Locking teeth enable to be repositioned & locking strength
- Stainless steel needle valve for precise flame adjustment and better durability
- Twin tubes, the bottom tube inside w/mixer for special design
- Brass high pressure lever
- Use with 44 / 41 tips
MODEL MG-242 RECOMMENDED TORCH HANDLE MG-241 RECOMMENDED TIP 44 / 41 (0 reviews) -
Attachments & TipsIOXYGEN MG-GB Series Gouging Tips
- One-piece type
- For MG-242 & 1600B cutting torches for gouging purpose
- Gouging / Weld removal
MODEL CUTTING RANGE
(MM)OXY. PRESSURE
(MM)ACE. PRESSURE
(BAR)LENGTH
(MM)MG-32GB 8 5 1 100 MG-48GB 11 6 1 100 MG-64GB 13 6.5 1 100 (0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Attachments & TipsIOXYGEN MG-W Series Welding Tips
- For MG-241 torch handle
- Recommend to use MG-243 mixer
MODEL TIP SIZE LENGTH (MM) ORIFICE (MM) MG-W6 6 150 0.6 MG-W8 8 150 0.8 MG-W10 10 180 1.0 MG-W12 12 200 1.3 MG-W15 15 220 1.4 MG-W20 20 240 1.5 MG-W26 26 292 1.8 MG-W32 32 312 2.0 (0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Machines & KitsIOXYGEN Oxygen/Acetylene Tool Box Kit
- Brass and stainless steel construction
- Torch handle w/two 2-stage stainless steel needle valves for fine-tuning function.
- Jagged design torch handle connection to enhance the stability.
- Complete accessory package with hose, spark lighter, goggles, tip cleaners and wrenches.
- O-ring seal design for easy assembling and disassembling, and better for preventing leakage.
- Forged and extruded brass for excellent durability.
MODEL GCW-24TB TORCH HANDLE MG-241 CUTTING ATTACHMENT MG-242 MIXER MG-243(AC) / MG-MIF (LPG) CHECK VALVE 88-3AR1 & 88-3AL1 (Optional) FLASHBACK ARRESTOR H188 / H288 (Opional) OXYGEN REGULATOR 25-7M ACETYLENE REGULATOR 25-1.4M WELDING TIPS MG-W (AC-8,10,12,15,20) / MG-WP (LPG-8,10,12,15,20) HEATING TIPS Opional CUTTING TIPS 41(AC-8,12,15) / 44(LPG-8,12,15) ACCESSORIES Twin Hose: 15Ft 1/4″ w/fittings, Spark lighter, Wernch Goggles Tip Cleaners and Cylinder key PACKAGE SERIES Steel toolbox package for collision-resistant. (0 reviews) -
Attachments & TipsIOXYGEN Propane Series 44 Cutting Tips
- Two-piece type
- For 1600B & MG-242 cutting torch & cutting attachment
MODEL CUTTING RANGE
(MM)OXY. PRESSURE
(BAR)PROPANE PRESSURE
(BAR)LENGTH
(MM)44-6 1-5 1.5 0.5 73 44-8 5-10 1.5 0.5 73 44-10 10-20 2 1 73 44-12 20-50 2.5 1 73 44-15 50-80 2.5 1 73 44-20 80-100 3 1.5 73 44-24 100-150 3.5 1.5 73 44-32 150-200 4 1.5 73 (0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BendersITM 1/2″ to 2″ Hydraulic Pipe Bender
Features
- Capable of bending angles from 0° to 90°
- Cold bending, no pre-warming of pipe is required
- Heavy duty castors
- Flip over top frame to easily remove bent pipe
- 2 stage heavy duty hydraulic pumping system
- Longer piston stroke per pump and optimized hand force minimises operator fatique
- Supplied in wooden case
Specifications
- Suitable for Carbon Steel and Wrought Iron Pipe
- 1/2″ – 2″ NB pipe capacity
- 1/2″, 3/4″, 1″, 1-1/4″, 1-1/2″, 2″ cast steel formers
- 0° to 90° Bending angle
- 13,000kg Force capacity
- 250mm Stroke
(0 reviews) -
BendersITM 1/2″ to 3″ Hydraulic Pipe Bender
Features
- Capable of bending angles from 0° to 90°
- Cold bending, no pre-warming or pipe is required
- Heavy duty castors
- Flip over top frame to easily remove bent pipe
- 2 stage heavy duty hydraulic pumping system
- Longer piston stroke per pump and optimized hand force minimises operator fatique
- Supplied in wooden case
Specifications
- Suitable for Carbon Steel and Wrought Iron Pipe
- 1/2″ – 3″ NB pipe capacity
- 1/2″, 3/4″, 1″, 1-1/4″, 1-1/2″, 2″, 2-1/2″, 3″ cast steel formers
- 0° to 90° Bending angle
- 20,000kg Force capacity
- 290mm Stroke
(0 reviews) -
BendersITM 1/2″ to 4″ Hydraulic Pipe Bender
Features
- Capable of bending angles from 0° to 90°
- Cold bending, no pre-warming or pipe is required
- Heavy duty castors
- Flip over top frame to easily remove bent pipe
- 2 stage heavy duty hydraulic pumping system
- Longer piston stroke per pump and optimized hand force minimises operator fatique
- Supplied in wooden case
Specifications
- Suitable for Carbon Steel and Wrought Iron Pipe
- 1/2″ – 4″ NB pipe capacity
- 1/2″, 3/4″, 1″, 1-1/4″, 1-1/2″, 2″, 2-1/2″, 3″, 4″ cast steel formers
- 0° to 90° Bending angle
- 20,000kg Force capacity
- 370mm Stroke
(0 reviews) -
GeneratorsITM 10KVA Generator Petrol 8000W Peak Electric Start
Features
All ITM generators are equipped with a reliable AVR (automatic voltage regulator) alternator utilising advanced electronic technology to provide a very pure energy supply with a THD (total harmonic distortion) of <5%. This clean and pure output means they are suitable to power even the most delicate electronic devices.- Powerful 4 Stroke OHV engines
- Low Oil Sensor
- Digital Multimeter Display
- Large Capacity Fuel Tanks
- 2 Year Trade Warranty
Specifications
- Engine HP: 17HP
- KVA: 10
- Max Watts: 8000
- Rated Watts: 7,500
- Noise @ 7m Full Load: 80dB
- Outlets: 2 x 15A
- Fuel Tank: 25L
- Running Time – 50% Load: 10 hours
- Starting System: Electric
- Handle & Wheel Kit: Yes
- Frame Dimensions: 69.5cm Long x 54.5cm Wide x 56.5cm High
- Net Weight: 95kg
(0 reviews) -
GeneratorsITM 10KVA Generator Petrol Construction 8000W Peak Electric Start with Remote
All ITM generators are equipped with a reliable AVR (automatic voltage regulator) alternator utilising advanced electronic technology to provide a very pure energy supply with a THD (total harmonic distortion) of <5%. This clean and pure output means they are suitable to power even the most delicate electronic devices.- Powerful 4 Stroke OHV engines
- Low Oil Sensor
- Digital Multimeter Display
- Large Capacity Fuel Tanks
- 2 Year Trade Warranty
The Construction Series models have a simple push button electric start (battery included) with a convenient remote control which is perfect for the large property or worksite where the generator may not be close to the tool being powered.
Complete with a heavy duty handle and wheel kit, IP66 rated power outlets and RCD (Residual Current Device.), the construction series gens are perfect for the professional tradesman needing a tough yet reliable source of power.
Specifications
- Engine HP: 17HP
- KVA: 10
- Max Watts: 8,000
- Rated Watts: 7,500
- Noise @ 7m Full Load: 80dB
- Outlets: 2 x IP66 15A
- Fuel Tank: 25L
- Running Time – 50% Load: 10 hours
- Starting System: Electric w/ Remote
- Handle & Wheel Kit: Yes
- Frame Dimensions: 69.5cm Long x 54.5cm Wide x 56.5cm High
- Net Weight: 95Kg
(0 reviews) -
GeneratorsITM 13KVA Generator Petrol 10,600W Peak with Honda GX630 Engine
ITM GX Series generators are powered by high-quality, reliable Honda GX Series 4-stroke engines, ensuring consistent performance and durability for professional use. Equipped with advanced AVR (Automatic Voltage Regulator) technology, these generators provide a clean and stable power supply with low THD (Total Harmonic Distortion) of <5%, making them safe for sensitive electronic equipment.Built to meet the demands of modern tradespeople, these generators feature:
- Powerful 4-stroke OHV engines for dependable power output.
- IP66-rated power outlets for superior protection in tough environments.
- RCD (Residual Current Device) for enhanced electrical safety.
- Low oil sensor to protect the engine from damage.
For peace of mind, every generator comes with:
- 2-year trade warranty.
- 3-year Honda engine warranty.
Whether you’re on a busy construction site or managing a large property, ITM GX Series generators offer the rugged dependability professionals need.
Specifications
- Wheel Kit not included: Sold Separately
- Max Watts: 10,500
- Rated Watts: 9,500
- Outlets: 2 x IP66 15A and 1 x IP66 32A Single Phase
- Engine Model: GX630
- Engine HP: 22hp
- Noise @ 7m Full Load: 79dB
- Fuel Tank: 34L
- Running Time: 11 Hours
- Starting Method: Electric
- Net Weight: 155kg
- Gross Weight: 170kg
(0 reviews) -
GeneratorsITM 15KVA Generator Petrol 12,000W Peak with Honda GX690 Engine
ITM GX Series generators are powered by high-quality, reliable Honda GX Series 4-stroke engines, ensuring consistent performance and durability for professional use. Equipped with advanced AVR (Automatic Voltage Regulator) technology, these generators provide a clean and stable power supply with low THD (Total Harmonic Distortion) of <5%, making them safe for sensitive electronic equipment.Built to meet the demands of modern tradespeople, these generators feature:
- Powerful 4-stroke OHV engines for dependable power output.
- IP66-rated power outlets for superior protection in tough environments.
- RCD (Residual Current Device) for enhanced electrical safety.
- Low oil sensor to protect the engine from damage.
For peace of mind, every generator comes with:
- 2-year trade warranty.
- 3-year Honda engine warranty.
Whether you’re on a busy construction site or managing a large property, ITM GX Series generators offer the rugged dependability professionals need.
Specifications
- Wheel Kit not included: Sold Separately
- Max Watts: 12,000
- Rated Watts: 10,500
- Outlets: 2 x IP66 15A and 1 x IP66 32A Single Phase
- Engine Model: GX690
- Engine HP: 24hp
- Noise @ 7m Full Load: 79dB
- Fuel Tank: 34L
- Running Time: 11 Hours
- Starting Method: Electric
- Net Weight: 157kg
- Gross Weight: 173kg
(0 reviews) -
GeneratorsITM 2.8KVA Generator Petrol 2300W Peak Recoil Start
Features
All ITM generators are equipped with a reliable AVR (automatic voltage regulator) alternator utilising advanced electronic technology to provide a very pure energy supply with a THD (total harmonic distortion) of <5%. This clean and pure output means they are suitable to power even the most delicate electronic devices.- Powerful 4 Stroke OHV engines
- Low Oil Sensor
- Digital Multimeter Display
- Large Capacity Fuel Tanks
- 2 Year Trade Warranty
Specifications
- Engine HP: 6HP
- KVA: 2.8
- Max Watts: 2,300
- Rated Watts: 2,000
- Noise @ 7m Full Load: 75dB
- Outlets: 2 x 15A
- Fuel Tank: 15L
- Running Time – 50% Load: 19 hours
- Starting System: Recoil
- Handle & Wheel Kit: No
- Frame Dimensions: 59.5cm Long x 46.5cm Wide x 47cm High
- Net Weight: 41Kg
(0 reviews) -
GeneratorsITM 3.75KVA Generator Petrol 3000W Peak with Honda GX200
ITM GX Series generators are powered by high-quality, reliable Honda GX Series 4-stroke engines, ensuring consistent performance and durability for professional use. Equipped with advanced AVR (Automatic Voltage Regulator) technology, these generators provide a clean and stable power supply.
Built to meet the demands of modern tradespeople, these generators feature:
- Powerful 4-stroke OHV engines for dependable power output.
- IP66-rated power outlets for superior protection in tough environments.
- RCD (Residual Current Device) for enhanced electrical safety.
- Low oil sensor to protect the engine from damage.
For peace of mind, every generator comes with:
- 2-year trade warranty.
- 3-year Honda engine warranty.
Whether you’re on a busy construction site or managing a large property, ITM GX Series generators offer the rugged dependability professionals need.
Specifications
3.75KVA 6.5HP GENERATOR- Max Watts: 3000
- Rated Watts: 2800
- Outlets: 1x IP66 15A
- Engine Model: GX200
- Engine HP: 6.5hp
- Noise @ 7m Full Load: 75dB
- Fuel Tank: 3.6L
- Running Time: 4.5 Hours
- Starting Method: Recoil
- Handle & Wheel Kit: No
- Net Weight: 47kg
(0 reviews) -
1000V SocketsITM 3/8″ Dr Metric 1000V Extension Bars
3/8″ Drive 3″ Insulated Extension Bar
- Approved for live working up to 1,000 volts
- Integrated protective insulation with two colours to clearly indicate if there is any damage
- Ball recess on the female end to grip the ratchet
- Ball socket retainer on the male end to securely grip the socket
- Chrome vanadium
- Design and manufactured to DIN3123B and IEC60900
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
1000V SocketsITM 3/8″ Dr Metric 1000V Insulated Ratchet
Features
3/8″ Drive Insulated Ratchet- Approved for live working up to 1,000 volts
- 72 teeth giving 5 degree increments between clicks
- Twist reverse for quickly and easily changing between tightening and loosening
- Design and manufactured to DIN3122D and IEC60900
Specifications
- Drive: 3/8″
- No of Teeth: 72
- Reverse Direction: Twist
- Length 2: 8Inch
- Tethering Facility: No
- Insulated: Yes
- Length: 200mm
- Included In:
- TEFSKV19
- TEDV3818
- TTV3814
- TEFXV27
- TEFXV28
- TEFSKV19NZ
(0 reviews) -
1000V SocketsITM 3/8″ Dr Metric 1000V Sockets
3/8″ Drive Insulated Socket
- Approved for live working up to 1,000 volts
- Integrated protective insulation with two colours to clearly indicate if there is any damage
- 6 point single hexagon socket for a better grip
- Chrome vanadium
- Ball recess on the female end to grip the ratchet
- Design and manufactured to DIN3120/3124, ISO2725 and IEC 60900
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BendersITM 3/8″ to 1″ Hydraulic Pipe Bender
- Suitable for Carbon Steel and Wrought Iron Pipe
- 3/8″ – 1″ NB pipe capacity
- 3/8″, 1/2″, 3/4″, 1″ cast steel formers
- 0° to 90° Bending angle
- 6,000kg Force capacity
- 150mm Stroke
- Supplied in metal carry case
(0 reviews) -
BendersITM 3/8″ to 1″ Tube Bender
Features
- Optimum bending results without deformation or ripples
- Universal applications include: U-bends, counter bends, swan-neck bends
- precise and simple to use
- Bench mountable
- Supplied in robust plastic carry case
Specifications
- Suitable for standard Steel and copper pipe
- 3/8″ – 1″ NB tube capacity
- 3/8″, 1/2″, 9/16″, 5/8″, 3/4″, 7/8″, 1″ Cast steel formers
- 0° to 180° Bending angle
Description
Bending Shoes
For bending pipes to 90°. Made of nodular cast iron, the bending shoes are strong and durable.(0 reviews) -
Metal Cutting Saw BladesITM 350mm Cermet Carbide Metal Cutting Blade
Features
110 Teeth Thin Metals Cermet Tipped Blade for cutting ferrous and non-ferrous metals including stainless steel & mild steel.Experience flawless cuts with precision and ease, as our Cermet Carbide Metal Cutting Blades effortlessly slice through mild steel and stainless steel.
The advanced cermet carbide technology and Flourine coating delivers unmatched hardness and heat resistance. This means longer blade life, reduced downtime, and significant cost savings for your business. Whether you’re working in construction, fabrication, or industrial manufacturing, our blades are built to withstand the most demanding applications.
Our Cermet Carbide Metal Cutting Blades are designed with safety in mind. With enhanced vibration dampening and reduced kickback, you can trust in a secure and stable cutting experience
- Up to 3 times longer life than standard metal cutting T.C.T. blades
- Saves time & money, giving cool cuts that need little to no finishing
- Superior hardness, wear and heat resistance
Specifications
Blade Diameter: 355mm (14″)
Number of Teeth: 110
Blade Bore: 25.4mm (1″)
Blade Kerf: 2.1mm
Blade Thickness: 1.7mm / 1.9mm
Max. RPM: 1500
Coating: FlourineSolid Material Thickness
- Mild Steel:
Maximum 6mm
Minimum 2mm - Stainless Steel:
Maximum 6mm
Minimum 2mm
Tube and Box Section Material Wall Thickness
- Mild Steel:
Maximum 6mm
Minimum 1mm - Stainless Steel:
Maximum 6mm
Minimum 1mm
(0 reviews) -
Metal Cutting Saw BladesITM 350mm Cermet Carbide Metal Cutting Blade
Features
64 Teeth General Purpose Cermet Tipped Blade for cutting ferrous metals including stainless steel & mild steel.Experience flawless cuts with precision and ease, as our Cermet Carbide Metal Cutting Blades effortlessly slice through mild steel and stainless steel.
The advanced cermet carbide technology and delivers unmatched hardness and heat resistance. This means longer blade life, reduced downtime, and significant cost savings for your business. Whether you’re working in construction, fabrication, or industrial manufacturing, our blades are built to withstand the most demanding applications.
Our Cermet Carbide Metal Cutting Blades are designed with safety in mind. With enhanced vibration dampening and reduced kickback, you can trust in a secure and stable cutting experience
- Up to 3 times longer life than standard metal cutting T.C.T. blades
- Saves time & money, giving cool cuts that need little to no finishing
- Superior hardness, wear and heat resistance
Specifications
Blade Diameter: 355mm (14″)
Number of Teeth: 64
Blade Bore: 25.4mm (1″)
Blade Kerf: 2.4mm
Blade Thickness: 2.0mm
Max. RPM: 1500Solid Material Thickness
- Mild Steel:
Maximum 25mm
Minimum 4mm - Stainless Steel:
Maximum 10mm
Minimum 4mm
Tube and Box Section Material Wall Thickness
- Mild Steel:
Maximum 12mm
Minimum 2mm - Stainless Steel:
Maximum 5mm
Minimum 2mm
(0 reviews) -
Power ToolsITM 350mm Metal Cutting Drop Saw
- 350mm Tungsten Carbide Tipped blade.
- Saves time & money giving cool cuts that need little to no finishing, eliminating any need for grinding or cool down time.
- The fully enclosed retractable guard increases user safety.
- Heavy-duty vice 90° – 45°.
- Pipe vice attachment.
- For cutting mild steel and aluminium.
- 12 months warranty.
- Supplied with Tungsten Carbide Tipped mild steel blade.
- Motor: 2200W, 3.0hp Single Phase 240V
- Blade Speed: Single Speed 1450rpm
- Blade Size: 350mm
- Blade Bore: 25.4mm
- Weight: 29kg
90° Cutting Capacity:
- Solid Round: 25mm
- Hollow Round: 120mm
- Square: 120mm
- Rectangle: 120 x 120mm
45° Right Cutting Capacity:
- Solid Round: 25mm
- Hollow Round: 90mm
- Square: 90mm
- Rectangle: 120 x 90mm
Replacement Blades:
- SSBL350-MS for mild steel to 25.4mnm
- SSBL350-TS for thin mild steel to 6mm
- SSBL350-AL for aluminium to 25.4mm
(0 reviews) -
Metal Cutting SawsITM 350mm Metal Cutting Drop Saw, 240v, Inc. Tct Mild Steel Blade
Features
- 350mm Tungsten Carbide Tipped blade.
- Saves time & money giving cool cuts that need little to no finishing, eliminating any need for grinding or cool down time.
- The fully enclosed retractable guard increases user safety.
- Heavy-duty vice 90° – 45°.
- Pipe vice attachment.
- For cutting mild steel and aluminium.
- For cutting stainless steel, the ITM Cermet Blades must be purchased in addition.
- 12 months warranty.
- Supplied with a Tungsten Carbide Tipped mild steel blade.
Specifications
Motor 3hp Single Phase (240V) Blade Speed Single Speed 1450rpm Blade Size 350mm Blade Bore 25.4mm Weight 29kg Cutting Capacity Cutting Angle Solid Round Round Square Rectangle 90° 25mm 120mm 120mm 120 x 120mm 45° 25mm 90mm 90mm 120 x 90mm (0 reviews) -
Metal Cutting Saw BladesITM 350mm TCT Saw Blades
Industrial quality T.C.T. cutting saw blade.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Metal Cutting Saw BladesITM 400mm TCT Saw Blades
With two pin holes – designed for use with MACC TA400 Saw
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
GeneratorsITM 4KVA Generator Petrol 3400W Peak Electric Start
Features
All ITM generators are equipped with a reliable AVR (automatic voltage regulator) alternator utilising advanced electronic technology to provide a very pure energy supply with a THD (total harmonic distortion) of <5%. This clean and pure output means they are suitable to power even the most delicate electronic devices.- Powerful 4 Stroke OHV engines
- Low Oil Sensor
- Digital Multimeter Display
- Large Capacity Fuel Tanks
- 2 Year Trade Warranty
Specifications
- Engine HP: 8HP
- KVA: 4
- Max Watts: 3,400
- Rated Watts: 3,200
- Noise @ 7m Full Load: 76dB
- Outlets: 2 x 15A
- Fuel Tank: 15L
- Running Time – 50% Load: 14 hours
- Starting System: Electric
- Handle & Wheel Kit: No
- Frame Dimensions: 59.5cm Long x 46.5cm Wide x 47cm High
- Net Weight: 52Kg
(0 reviews) -
GeneratorsITM 4KVA Generator Petrol Construction 3400W Peak Electric start with Remote
All ITM generators are equipped with a reliable AVR (automatic voltage regulator) alternator utilising advanced electronic technology to provide a very pure energy supply with a THD (total harmonic distortion) of <5%. This clean and pure output means they are suitable to power even the most delicate electronic devices.- Powerful 4 Stroke OHV engines
- Low Oil Sensor
- Digital Multimeter Display
- Large Capacity Fuel Tanks
- 2 Year Trade Warranty
The Construction Series models have a simple push button electric start (battery included) with a convenient remote control which is perfect for the large property or worksite where the generator may not be close to the tool being powered.
Complete with a heavy duty handle and wheel kit, IP66 rated power outlets and RCD (Residual Current Device.), the construction series gens are perfect for the professional tradesman needing a tough yet reliable source of power.
Specifications
- Engine HP: 8HP
- KVA: 4
- Max Watts: 3,400
- Rated Watts: 3,200
- Noise @ 7m Full Load: 76dB
- Outlets: 1 x IP66 15A
- Fuel Tank: 15L
- Running Time – 50% Load: 14 hours
- Starting System: Electric w/ Remote
- Handle & Wheel Kit: Yes
- Frame Dimensions: 59.5cm Long x 46.5cm Wide x 47cm High
- Net Weight: 54Kg
(0 reviews) -
GeneratorsITM 6.8KVA Generator Petrol 5500W Peak Electric Start
Features
All ITM generators are equipped with a reliable AVR (automatic voltage regulator) alternator utilising advanced electronic technology to provide a very pure energy supply with a THD (total harmonic distortion) of <5%. This clean and pure output means they are suitable to power even the most delicate electronic devices.- Powerful 4 Stroke OHV engines
- Low Oil Sensor
- Digital Multimeter Display
- Large Capacity Fuel Tanks
- 2 Year Trade Warranty
Specifications
- Engine HP: 13HP
- KVA: 6.8
- Max Watts: 5,500
- Rated Watts: 5,000
- Noise @ 7m Full Load: 78dB
- Outlets: 2 x 15A
- Fuel Tank: 25L
- Running Time – 50% Load: 13 hours
- Starting System: Electric
- Handle & Wheel Kit: Yes
- Frame Dimensions: 69.5cm Long x 54.5cm Wide x 56.5cm High
- Net Weight: 81Kg
(0 reviews)
