Industrial Equipment & Supplies

• Measure pressure, 0.05% of full scale with internal sensor up to 5000 psi/345 bar sensor (5000G model)
• Measure mA with 0.015% accuracy and 0.001 mA resolution, while sourcing 24 V loop power
• Measure pressure to 10,000 psi/700 bar using one of 29 Fluke 700Pxx Pressure Modules
• 1/8 NPT female pressure fitting
• Compatible with non-corrosive Gases and liquids
• Select eleven different engineering units
• Zero, min, max, and hold functions
• Calibrate P/I instruments with simultaneous pressure and current measurement
• Pressure switch test function captures set, reset and Deadband values of a pressure switch
• Error % calculation of mA measurements for quick pass-fail decisions
• Long lasting battery life
• Holster features test lead storage
• Compatible with Toolpack magnetic hanging system
• New switch test

• Pressure Source and mA Measurement to calibrate pressure devices
• Built-in pump for sourcing pressure to 300 PSI
• Easy-to-clean, field-serviceable, integrated pressure pump
• Built-in switch test for calibrating pressure switches
• Extend pressure capabilities by using Fluke 750P pressure modules

• Unique integrated electric pump for one handed pressure calibration
• Test pressure switches easily with easy-to-use switch test function
• Precision pressure adjust vernier for easy and accurate pressure calibration
• Ideal accuracy and performance (0.025%) for reference class transmitter calibration
• 30 psi, 150 psi and 300 psi pressure ranges
• Programmable pressure calibrator pump limit:
  • Eliminates over-pressurization
  • Allows the user to program target pressures for pumping
• Extended pressure measurement range with any of 29 750P Pressure Modules
• Pump cleanout ports reduce pump failures from moisture and fluid damage
• Fluid trap included with the unit to mitigate chance of fluid damage in at-risk applications
• Precision temperature measurement with optional RTD probe

• Precision pressure calibrator with dual isolated sensors for gas flow calibration (custody transfer) applications
• Features two isolated, stainless steel, pressure sensors with 0.025% accuracy
• Includes Pt100 RTD input for temperature measurement (probe optional)
• Measures 4 to 20 mA signals
• Provides internal 24 V loop power supply to power a transmitter under test

• Automatic pressure generation and regulation to 300 psi
• Configure procedures for pressure transmitters and switches
• Measure, source, and simulate 4 to 20 mA signals
• Troubleshoot and calibrate HART smart transmitters
• Automatically document test results

Portable automatic pressure calibrator simplifies pressure calibration

The Fluke 729Pro Automatic Pressure Calibrator has been designed specifically with process technicians in mind to simplify the pressure calibration process and provide faster, more accurate test results. Technicians know that calibrating pressure can be a time-consuming task, but the 729Pro makes it easier than ever with an internal electric pump that provides automatic pressure generation and regulation in an in an easy-to-use, rugged, portable package.

Automatic pressure generation and control

The 729Pro allows you to simply type in a target pressure, and the calibrator will automatically pump to the desired set-point. With plug-in replaceable pressure control modules and pressure generation and regulation up to 1000 psi (70bar, 7000 kPa). Then, internal fine adjustment control automatically stabilizes the pressure at the requested value. You can also fill in a test template and the 729Pro will automatically pump to and document a multiple-point pressure calibration test at the touch of a button.

Easy calibration documentation

The Fluke 729Pro can automatically test multiple pressure test points and automatically document the results. The 729Pro does the work for you by documenting and flagging out-of-tolerance test results in red on the graphical display for:

• Applied pressure
• Measured mA, mV, or digital PV
• % error for each test point

Upload and manage documented calibration results with DPCTrack2™ Calibration Management Software, making it easy to manage your instrumentation, create scheduled tests and reports, and manage calibration data.

HART communication

Built-in HART communication capabilities enable HART transmitter mA adjustments, HART configuration, and the ability to adjust to applied 0% and 100% values. You can also configure various tasks such as changing a transmitter tag, measurement units, and ranging. Other supported HART commands include setting fixed mA outputs for troubleshooting, read device configuration, and variables and read device diagnostics.

Rugged, portable design

The 729Pro is tested and warranted to withstand a 1-meter drop test so it is ready for field instrumentation calibration work. With two models 4M up to 600 psi (40 bar, 4000 kPa), and 7M up to 1000 psi (70 bar, 7000 kPa) to choose from, the Fluke 729Pro Automatic Pressure Calibrators are designed to perform when and where you need them. A standard semi-rigid carrying case designed for field work, with room in the case to store test hoses, fittings, test leads, and small hand tools means it’s easy to carry everything needed for field pressure calibrations.

For greater accuracy and resolution on low pressure calibrations, the Fluke 729Pro allows you to select and insert one of 6 Fluke Pressure Modules to expand the pressure range between 0-600 psi (40 bar, 4000 kPa).

• Pressure measurement from ±10 inH2O/2.5 kPa to 10000 psi/69 MPa
• Four absolute pressure measurement ranges: 15 PSIA (103 kPa), 30 PSIA (207 kPa), 100 PSIA (690 kPa), 300 PSIA (2 MPa)
• Pressure measurement accuracy 0.05% of full scale, 0.02% optional
• Current measurement range: 0-24mA
• Voltage measurement range: 0-30VDC
• 0.01% current and voltage accuracy
• Powerful HART communication, supports HART 7
• 24V loop power, no external power supply needed
• Lithium battery life: 25 hours continuously (without 24 V loop power), or 8 hours continuously (24 V loop power)
• Storage up to 128 sets of calibration data
• Ingress protection: IP54
• 1-meter drop test
• Three-year warranty

Fluke 750P Series Pressure Modules will turn your Fluke multifunction calibrator into a full-fledged pressure calibrator. These flexible modules not only work with multifunction calibrators like the 725, 726 or 750 Series Calibrators but also extend the measurement range of Fluke pressure calibrators. Since the pressure modules are calibrated independently, they can be swapped from one calibrator to another without a loss of accuracy or traceability.

Measuring pressure with Fluke 750P Series Pressure modules is as easy as connecting the module to a pressure source or hand pump, connecting the pressure module cable to the calibrator and then applying pressure from the pressure source. At the touch of a button the measured pressure is displayed digitally on the calibrator in up to 11 different engineering units quickly giving you the data you need. And, with “no tools required” connectors you don’t even need to reach for a wrench to make connections.

When used with the 750 Series Documenting Process Calibrators pressure readings can even be date/time stamped and stored in documented calibration records for later retrieval. This saves time, eliminates errors, and supports compliance with quality standards and regulations.

A complete family of pressure modules

With over 50 pressure modules covering pressure calibration and measurement workloads from 1 inH20 to 10,000 psi (2.5 mBar to 690 bar) finding a model to meet the needs of your specific application is easier than ever. All modules include NPT, metric (BSP) and M20 adapters.

Choose from:

• Differential modules
• Gage modules
• High pressure modules
• Absolute modules
• Vacuum modules
• Dual range modules
• Reference modules
• Intrinsically safe modules

With more than 50 pressure modules to choose from, some of the more popular modules include:

• Fluke 750P00
• Fluke 750P02
• Fluke 750PD2
• Fluke 750P03
• Fluke 750P05
• Fluke 750P06
• Fluke 750P29

Click the Models tab above for a full list of pressure modules.

Designed to go where you work

Pressure instruments are often installed in harsh, hard to reach locations, so you need test tools that handle rough service. 750P Series Pressure Modules feature a rugged protective boot that guards the module against shock and seals against dirt and dust, if you accidently drop them, there’s no need to worry. The 750P series modules are also specified across a broad temperature range. Though more accurate across a narrower temperature range if used indoors, these modules are designed and specified to deliver traceable pressure measurements in environments from -10 °C to +50 °C.