Industrial Equipment & Supplies
Showing 1513–1548 of 9042 results
-
Personal Insect RepellentDYMARK RID 50ml Kids Roll On
Kids- A lower concentration of DEET with just 7% effectively repels for 2 hours
- Alcohol free with a mild fragrance
- Ideal for children over 12 months and people with sensitive skin
- Antiseptic reduces inflammation and assists to prevent infection caused by insect bites. Designed to be applied as a FIRST AID as a BEFORE and AFTER bite medication
- Combined with a fly repellent effective against files, gnats, tsetse flies, ants and lice
- PETA Friendly, NOT tested on animals medication
(0 reviews) -
Personal Insect RepellentDYMARK RID 50ml Ultimate Roll On
Antiseptic- 16% DEET effectively repels for up to 4 hours
- Designed to be a before and after bite medication with antiseptic to reduce inflammation and assist to prevent infection caused by insect bites
- Chamomile helps soothe the bite to stop the itching
- Vitamin E assist wound healing of broken skin
- Neutral scent from Chamomile
- PETA Friendly, NOT tested on animals medication
(0 reviews) -
Personal Insect RepellentDYMARK RID 60ml Tropical Roll On
Tropical- Contains 19.5% DEET at safe levels to effectively repel for 6 hours
- Formulated with Antiseptic to reduce inflammation and assists to prevent infection caused by insect bites
- Designed to be applied as a FIRST AID as a BEFORE and AFTER bite medication
- Repels against mosquitoes that may carry Ross River Virus and Dengue*
- Combined with a fly repellent effective against flies, gnats, tsetse flies, ants and lice
- PETA Friendly, NOT tested on animals medication
(0 reviews) -
Decorative CoatingsDYMARK Sealant Applicator Tool
Sealant Tools
- Helps the beginner or expert remove any type of caulk/sealant, even if it has been in place for years
- No chemicals or mess
- Re-usable tool
- Saves valuable time and effort
(0 reviews) -
Decorative CoatingsDYMARK Sealant Remover Tool
Sealant Tools
- Helps the beginner or expert remove any type of caulk/sealant, even if it has been in place for years
- No chemicals or mess
- Re-usable tool
- Saves valuable time and effort
(0 reviews) -
AerosolDYMARK Spray & Mark Water Based
Spray & Mark Water Based
Marking Out Paint
350g- Low odour and lower toxicity
- Brighter colour range for highly visible marks
- Toluene and Xylene free formula
- Ideal for use on concrete, bitumen, steel, timber, polystyrene foam and grass
- Suitable for use with Dy-Mark’s Long Arm Handle and Spot Marking Handle
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
AerosolDYMARK Spray Ink
Spray Ink
Stencil & Colour Coding Paint
315g- Toluene-free formula
- Specially formulated for stencil applications
- Also suitable for general colour coding
- Fast drying and lightfast paint
- Reduced spray drift allowing maximum accuracy of spray pattern
- Unique formulation minimises build-up when used on stencils
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
AerosolDYMARK Spray Writer
Spray Writer
Forestry & Plantation Marking Paint
350g- Toluene-free formula
- Ideal for all natural and cut timber applications
- Will mark wet surfaces without cracking and peeling
- Unique formulation reduces spray drift allowing maximum accuracy of spray pattern
- Ideal for the forestry and timber processing industries
- Also suitable for marking masonry and concrete
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
AerosolDYMARK Steadfast Stockmark
Steadfast Stockmark
325g- Long lasting marker
- Ideal for identifying stock by colour coding
- Fully scourable
- Complies with Australian Standard AS4054 1992
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
-
Packaging SuppliesDYMARK Strapping 19mmX1000m PP/HD
Heavy Duty Poly Hand Strapping
- Easy to apply and remove
- Lightweight and strong
(0 reviews) -
WrappingDYMARK Stretchwrap
Hand Stretchwrap & Accessories
- Durable polyethylene stretch film
- Excellent puncture resistance
- Useful in stabilising sharp or bulky objects
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Packaging SuppliesDYMARK Tape Dispenser Pistol Grip
Tape Dispenser
- Pistol grip tape dispensers
- Suitable for tapes with thickness up to 50mm
(0 reviews) -
Packaging SuppliesDYMARK Tensioner CFH HD 19mm Poly PP CFH Heavy Duty T-010CFH19/S
Polypropylene Strapping Tools
- Dispenser – ideal for quick and easy roll changes
- Crimpers – designed to crimp metal, snap-on and polypropylene seals
- Tensioners – adjustable width cutting and tensioning tool that will work in any position
(0 reviews) -
Packaging SuppliesDYMARK Tensioner Steel Strap 12-19mm Heavy Duty
Steel Strapping Tools
- Quality tools designed for use with Dy-Mark’s Steel Strapping
- Heavy duty construction for long lasting use
- Easy to use
(0 reviews) -
Personal Insect RepellentDYMARK Terminator C.I.K 350g High Performance Crawling Insect Killer
Terminator Crawling Insect Killer
Dual Action Surface Spray kills crawling insects when sprayed either directly in the direction of OR onto the insect and protects for longer periods, because it leaves an insecticidal film that controls insect pest as they crawl over the surface.
(0 reviews) -
Personal Insect RepellentDYMARK Terminator M.I.K 250g High Performance Odourless Multi Insect Killer
Terminator Multi Insect Killer
Can control both flying insects and crawling insects with one short spray in the direction of the flying insect and directly on the crawling insect for fast knockdown and quick kill, plus can also be used as complete room treatment.
(0 reviews) -
BulkDYMARK TreadRite
TreadRite™
Slip Resistant Coating
1L, 4L and 10L- Creates durable slip resistant surfaces
- Easy to apply with uniform coverage
- Resists cracking, peeling and exposure to petrol, oil and mild chemicals
- Ideal for interior and exterior untreated timber, concrete, primed metal, brick & clay pavers
- Residential applications include small projects, stairs and railings
- Industrial applications include stairs, entrances and exit ways
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
AerosolDYMARK Turf Master
Turf Master
Temporary Grass Marking Paint
500g- Quick dry, toluene-free formula
- Low toxicity formula does not damage grass
- Ideal for landscaping and sporting grounds
- Designed for use with the Dy-Mark Line Master
- Also suitable for use by hand (nozzle available separately)
(0 reviews) -
Marking AccessoriesDYMARK Zinc Stencil 0-9
Zinc Stencil
- Solvent resistant zinc material
- Easy to clean and re-usable
- Available in A – Z and 0 – 9
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Marking AccessoriesDYMARK Zinc Stencil A-Z
Zinc Stencil
- Solvent resistant zinc material
- Easy to clean and re-usable
- Available in A – Z and 0 – 9
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsDYMAXION 1.1/4″ UNC Core Bit Accessories
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsDYMAXION 1/2″ BSP Core Bit Accessories
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsDYMAXION Adjustable Hole Saw 40mm to 180mm
- Adjustable Hole Cutter – 40-180mm
- Quickly and safely cut large diameter holes in a wide variety of materials.
- Simple to adjust and built to last.
- Adjustable cutting thickness from 5mm to 50mm.
- Balance bar ensures minimal vibration when cutting large diameter holes.
- Supplied with TCT and High Carbon Steel Blades.
- TCT Timber Blades – Suitable for cutting veneer, plywood, composite board, plasterboard, fibre cement sheet and acrylic sheet.
- High Carbon Steel Blades – Suitable for cutting sheet metal up to 1mm thick – including brass & aluminium using tungsten carbide spear tip blade included.
(0 reviews) -
Hole Saws & KitsDYMAXION Adjustable Hole Saw 40mm to 220mm with Dust Shroud
- Adjustable Hole Cutter – 40-220mm
- Quickly and safely cut large diameter holes in a wide variety of materials.
- Simple to adjust and built to last.
- Supplied with two replaceable tungsten carbide blades.
- Adjustable cutting thickness from 5mm to 50mm.
- Impact resistant cowl collects dust and debris whilst protecting the operator from flying material.
- Balance bar ensures minimal vibration when cutting large diameter holes.
- AHSRC Blades – Suitable for cutting veneer, plywood, composite board, plasterboard, fibre cement sheet and acrylic sheet.
- AHSRS Blades – Suitable for cutting sheet metal up to 1mm thick – including brass & aluminium using tungsten carbide spear tip blade included.
(0 reviews) -
Hole Saws & KitsDYMAXION Adjustable Hole Saw 40mm to 300mm with Dust Shroud
- Adjustable Hole Cutter – 40-300mm
- Quickly and safely cut large diameter holes in a wide variety of materials.
- Simple to adjust and built to last.
- Supplied with two replaceable tungsten carbide blades.
- Adjustable cutting thickness from 5mm to 50mm.
- Impact resistant cowl collects dust and debris whilst protecting the operator from flying material.
- Balance bar ensures minimal vibration when cutting large diameter holes.
- AHSRC Blades – Suitable for cutting veneer, plywood, composite board, plasterboard, fibre cement sheet and acrylic sheet.
- AHSRS Blades – Suitable for cutting sheet metal up to 1mm thick – including brass & aluminium using tungsten carbide spear tip blade included.
(0 reviews) -
Cutting WheelsDYMAXION Aluminium Milling Blade
- For aluminium milling, grooving, cutting and weld preparation.
- Hardened steel blade body.
- Premium tungsten carbide cutting tips.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Cutting WheelsDYMAXION Cutting Disc Ferrous and Stainless Steels
- Suitable for cutting ferrous and stainless steels (inox).
- High cutting performance.
- Thin cut off discs reduce wastage.
- Fast cutting for extended battery life in cordless tools.
- Do not exceed maximum safe speed of 80m/s.
- Complies with DIN EN 12413 European standard and AS1788.1-1987 Australian standard.
- Cutting disc must be mounted correctly as per machine manufacturer’s specifications.
- Metal guards must be fitted and used on all machines.
- If cutting disc is chipped,cracked or damaged it must not be used, and needs to be replaced.
- Equal diameter flanges must be fitted. Flanges must be a minimum 1/3 diameter of cutting disc.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsDYMAXION Diamond Core Bits for Limestone and Asphalt in Core Drilling Machines
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsDYMAXION Diamond Core Bits for Polymer Concrete Pits, Granite and Porcelain
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsDYMAXION Diamond Core Bits for Reinforced Concrete in Core Drilling Machines
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsDYMAXION Diamond Core Bits Multi-Material inc. Concrete
- Suitable for cutting concrete, brick, compressed fibre cement sheet, granite and other masonry building materials.
- Utilising adaptor AUB100 these core drills can be used with core drilling machines.
- Diamond core drills and hole saws require the use of proper lubrication, correct drill speed and proper pressure.
- Drilling methods and techniques vary significantly depending upon the material being drilled.
- To achive optimum cutting performance and maximum core drill life use a slow to very slow drill speed, low drill pressure, and plenty of water for lubrication.
- Variable speed drills work best since the correct speed can be selected.
- Diamond core drills only drill out a portion of the resulting hole so they drill much faster than conventional blunt nose drills.
- The life of any type of diamond drill depends upon the hardness, abrasiveness and thickness of the material being drilled and the specific drilling techniques used.
- Using diamond core drills in hard materials is not difficult, however drilling the hole takes time.
- You should consider that they aren’t “drilling” a hole – they are “grinding” a hole.
- DO NOT USE HAMMER ACTION.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Diamond Sharpening ProductsDYMAXION Diamond Folding Sharpener
- Folding diamond sharpener.
- Medium Grit (400) diamond sharpening hone.
- Double sided.
- 20x100mm diamond pad.
- 20x225mm overall size when open.
(0 reviews) -
Hole Saws & KitsDYMAXION Diamond Hole Enlarger
- Use to enlarge an existing hole.
- Ideal for use in porcelain and stone – can also be used in most common building materials.
- Insert in drill and slowly guide the drill in an anti-clockwise direction around the hole to be enlarged.
- Use firm pressure against the surface to be removed.
- Can also be used to grind rebates and irregular shapes.
Diameter (mm): 35 Segment Height (mm): 25 Shank (mm): 10mm Hex Ideal For: Enlarging holes in porcelain and stone. (0 reviews)
