Industrial Equipment & Supplies
Showing 13429–13464 of 13947 results
-
Stands & RampsTQB BRANDS Jack Stands 8,000kg
TradeQuip “Made for the Trade” Adjustable Jack Stands are ideally suited to the professional trade workshop. These ratchet type axle stands are designed with a cast iron support post, tough steel plate welded base and deep saddle for positive location under the vehicle. The cast iron post is equipped with angled teeth to prevent accidental release of load – the more weight applied, the tighter the post is locked.
We often forget that working with cars and other vehicles can be a dangerous job. It’s easy to get complacent about yours and your employees’ safety when you have years of experience, however accidents can happen to anyone. Although garage and bottle jacks can lift heavy loads they are not designed to keep them there, so when the vehicle has been jacked up it’s crucial that it is placed on a jack stand.
TradeQuip jack stands are excellently designed to ensure you maximum safety. They have wide feet providing a strong base.
(Previous models include product code/s; 8TJS)
Features
- Constructed of high-grade steel and built to exacting standards for quality and durability
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy cleanup
- Quick action adjustable height mechanism
- Welded steel frame & cast iron support
- Adjustable height
- Reinforced shaft for added strength stability
- Sold in pairs and only recommended to be used in pairs
Specifications
- Safe Working Capacity: 8,000kg(when used as a pair)
- Minimum Height: 468mm
- Maximum Height: 715mm
- Saddle Size: 125×40(mm)
- Base Size: 324 x 294mm
- Tested to Australian Standard AS2538:2016
- Carton: 350 x 320 x 580mm
- Weight: 30kg
Intended Use
In pairs for passenger vehicle use, where a lifted vehicle is to be supported before conducting servicing or repair work.
NOTE: Sold in pairs and only recommended to be used in pairs
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use jack stands.
(0 reviews) -
Parts WashersTQB BRANDS Jet Blast Parts Washer with Heating System
The TradeQuip Jet Blast Parts Washer with Heating System is designed to deliver fast, efficient, and professional cleaning of automotive, industrial, and machinery components. Combining heated water-based cleaning fluid, compressed air, and an integrated cleaning gun, it removes grease, oil, and contaminants with minimal effort while providing a safer alternative to solvent-based cleaning.
Built with a durable steel cabinet, large working area, and adjustable digital temperature control up to 60°C, the Parts Washer improves cleaning performance by using heated cleaning fluid to break down stubborn deposits. The enclosed cabinet design, integrated LED lighting, ventilation fan, and air drying function provide a clean, efficient workspace while helping to reduce mess and improve operator visibility.
Ideal for professional workshops, maintenance facilities, and industrial environments, the Jet Blast Parts Washer is suitable for cleaning engine components, transmissions, gearboxes, bearings, suspension parts, and a wide range of mechanical assemblies.
Features
- Heated water-based cleaning system with adjustable temperature up to 60°C.
- Powerful cleaning gun and compressed air drying function.
- Integrated LED lighting and ventilation fan for improved visibility.
- Large enclosed cleaning cabinet helps contain overspray.
- Digital temperature controller for precise heating control.
- Durable steel construction for long service life.
- Designed for use with non-flammable, water-based cleaning solutions.
Specifications
- Cleaning Fluid Capacity: 8–14 L
- Heating Temperature: Up to 60°C
- Working Pressure: 70–120 PSI
- Overall Dimensions: 820 × 610 × 1335 mm
- Working Area: 737 × 559 × 452 mm
(0 reviews) -
Hand ToolsTQB BRANDS Jumbo Spanner Set 10pce – Imperial
This “Borum Industrial” Jumbo Combination Spanner Set includes 10 popular imperial large-sized combination wrenches from 1 5/16in. to 2in. Made of heat-treated drop forged steel with a chrome vanadium finish. The high-quality, chrome plating looks great and provides a durable, easy-to-clean finish. The ring ends have 15 degrees of offset for knuckle clearance and increased access in tight spaces. Kit includes hard wearing storage roll. The ring end on these super-sized combination wrenches gives you a steady, sturdy grip on nuts and bolts whilst the open end offers an easy option in awkward or confined spaces.
Features:
- High-quality, chrome plating provides a durable, easy-to-clean finish
- Heat Treated C45 Carbon Steel construction
- Exact fit that won’t strip nut or bolt heads
- 15 degree offset ring spanner for greater range
- Supplied in convenient robust storage roll
Specifications:
- 10 Imperial sizes: 1 5/16″, 1 3/8″, 1 7/16″, 1 1/2″, 1 5/8″, 1 11/16″, 1 3/4″, 1 13/16″, 1 7/8″, 2″”
- Wallet rolled out: 830 x 690 x 30mm
- Wallet rolled up: 150 x 690 x 130mm
- Weight: 14kg
(0 reviews) -
Hand ToolsTQB BRANDS Jumbo Spanner Set 10pce – Metric
This “Borum Industrial” Jumbo Combination Spanner Set includes 10 popular metric large-sized combination wrenches from 34mm to 50mm. Made of heat-treated drop forged steel with a chrome vanadium finish. The high-quality, chrome plating looks great and provides a durable, easy-to-clean finish. The ring ends have 15 degrees of offset for knuckle clearance and increased access in tight spaces. Kit includes hard wearing storage roll. The ring end on these super-sized combination wrenches gives you a steady, sturdy grip on nuts and bolts whilst the open end offers an easy option in awkward or confined spaces.
Features:
- High-quality, chrome plating provides a durable, easy-to-clean finish
- Heat Treated C45 Carbon Steel construction
- Exact fit that won’t strip nut or bolt heads
- 15 degree offset ring spanner for greater range
- Supplied in convenient robust storage roll
Specifications:
- 10 Metric sizes: 34mm, 36mm, 38mm, 41mm, 42mm, 44mm, 45mm, 46mm, 48mm, 50mm
- Wallet rolled out: 830 x 690 x 30mm
- Wallet rolled up: 150 x 690 x 130mm
- Weight: 14kg
(0 reviews) -
Trolleys & CreepersTQB BRANDS Low Profile Foldable Creeper 150kg
eQuipt “Designed to Deliver” space-saving foldable creeper features a low-profile design and a robust 150kg load capacity for demanding workshop environments. The oil and solvent-resistant finish is easy to clean and rust-proof, ensuring long-lasting durability in commercial settings. Six smooth-rolling swivel castors provide excellent maneuverability, while the padded headrest ensures operator comfort during use. Its unique foldable construction allows for compact storage, making it an ideal choice for mechanics, car dealerships, and home garages.
Features
- Oil and solvent resistant
- Easy to clean finish
- Won’t rust
- Padded headrest
- Six smooth rolling swivel castors
Specifications
- Safe Working Capacity: 150kg
- Swivel Castors: 6 x 76mm
- Open Dimensions: 1070(L) x 550(W) x 130(H)mm
- Closed Dimensions: 580(L) x 550(W) x 175(H)mm
- Weight: 9kg
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use jack stands.
(0 reviews) -
Workshop Presses & AccessoriesTQB BRANDS Master Press & Pull Set
This versatile TradeQuip Universal Press and Pull Sleeve Kit includes everything you need to remove and install bushes, bearings and seals. Constructed from heat-treated forged high carbon steel, this durable set is perfect for the removal and installation for Bearing bushes ,Silent bearing, Hydraulic bearing and Rubber bearing. This units comes in an individually organised carrying case, making it perfect for both the automotive professional or serious DIY enthusiast. The professional “Made for the Trade” 28pce Press and Pull Sleeve Kit has applications across several industries.
Features- 20 Sleeves Constructed from heat-treated forged carbon steel
- Sturdy Blow Mould Case
Specifications
- 4 x Step Plates: 74, 76, 78, 80mm
- 4 x Pulling Spindles With Thrust Bearings (10mm, 12mm, 14mm & 16mm)
- 20 x Press Sleeves: 44 x 43; 46 x 36; 48 x 38; 50 x 40; 52 x 42; 54 x 44; 56 x 46; 58 x 48; 60 x 50; 62 x 52; 64 x 54; 66 x 56; 68 x 58; 70 x 60; 72 x 62; 74 x 64; 76 x 66; 78 x 68; 80 x 70; 82 x 72mm
Intended Use
This Master PRESS & PULL KIT’s intended use is for the removal and installation of bushes, bearings and seals, races, bearings, sprockets and pulleys on cars, trucks, off-road construction equipment and machinery
(0 reviews) -
Trolleys & CreepersTQB BRANDS Mechanics Creeper
The TradeQuip “Made for the Trade” low profile moulded mechanics creeper comes complete with 6 x 75mm high quality swivel castors for easy manoeuvring. This creeper is equipped with a thick padded cushion headrest for extra comfort and two convenient side moulded tool trays. This trade quality model is moulded from tough high impact polymer, features comfortable ergonomic shoulder recesses and an integrated carrying handle. Glide just 100mm above the ground in this lightweight low-riding mechanics creeper. The durable rubber/nylon offset-centre castors with ball-bearing swivelling wheels roll smoothly across the workshop floor and turn easily for ultimate maneuverability.
Easily clear the undercarriage of most vehicles with this low-profile mechanics creeper. The creeper body is manufactured to “Made for the Trade” quality using a high-impact polymer material that resists impacts, won’t rust and is easy to clean. With a comfortable padded headrest and load capacity of up to 130kg, this low-profile creeper is one of the lightest and most durable available to the Australian Automotive Repair market.
Features- Monoque high impact resistant polymer plastic design
- Oil and solvent resistant
- Easy to clean finish
- Won’t rust
- Padded headrest
- Six smooth-rolling swivel castors
- Built-in tool storage trays
Specifications
- Safe Working Capacity: 130kg
- Swivel Castors: 6 x 75mm
- Dimensions: 1010(L) x 475(W) x 115(H)mm
- Replacement Castors: Code# 1023-1
- Carton: 1030 x 500 x 90mm
- Weight: 6kg
(0 reviews) -
Trolleys & CreepersTQB BRANDS Mechanics Creeper Caddy
This very handy TradeQuip “Made for the Trade” Creeper Caddy keeps nuts, bolts and small tools within reach with its convenient compartments and handy handles. With 2 large and 3 small compartments, organising your next under-car challenge just got easier. The durable ABS impact resistant polymer tray is 50mm tall by 450mm across and 400mm wide and rides on 50mm swivel castors.
Features- Easy to clean finish
- Oil and solvent resistant
- Won’t rust
- 4 smooth-rolling swivel castors
- Impact resistant polymer plastic design
- Built-in parts/tool storage compartments
Specifications
- Safe Working Capacity: 25kg
- Swivel Castors: 4 x 50(D)x16(W)mm
- Tray Depth: 43mm (inner)
- Length: 435mm
- Width: 400mm
- Height: 120mm (castor included)
(0 reviews) -
Blasting EquipmentTQB BRANDS Mobile Blasting Kit 37Litre
The TradeQuip “Made for the Trade” Mobile Abrasive Blasting Kit is perfect for a wide variety of surface preparation jobs such as removing paint, scale, rust and oxidation. Ideal for surface preparation on cars, trucks, machinery, steel, glass etching and much more. Features a 2.4m heavy-duty blast hose designed for long life and maneuverability. Durable wheels and built-in handle allow for easy transport. Simply add abrasive media and hook up to an air supply and you’re ready to blast. Some assembly required.
(Previous models include product code; 3060)
Note: TradeQuip Walnut Shells cannot be used in this mobile blasting unit.
PLEASE NOTE:
Minimum Free Delivery required to operate this unit (using Medium grit and the Small nozzle) is 400 Litres per minute.
Recommended Compressor Air Supply Delivery is 600 Litres per minute.
Features
- Heavy duty welded steel design
- High volume extra large valve
- Designed for high flow with minimal air input
- Blast gun fitted with safety trigger
- Heavy-wall blast hose
- Safety pressure-relief valve
- Durable wheels
- Safety hood, thread tape and abrasive refill funnel
- Onboard pressure regulator
- 4x ceramic nozzle tips 2.0 2.5 3.0 3.5mm
- Easy to fill screw tank cap
Replacement parts available
- 3008-1: Ceramic Tip Set to suit Old Style Ball Valve Type Handpiece 2.4 2.6 3.2 3.6mm
- 3008-2: Sand blasting gun
- 3008-3: Replacement Ceramic Tip Set 2.0 2.5 3.0 3.5mm
- 3008-4: Rubber Pad for 3008/2
- 3008-25: Replacement Hose
Specifications
- Capacity: 37 Litre
- Working Pressure: 60-125psi
- Air Delivery: 400-600 Litres per Minute @ 125psi (dependent on nozzle size)
- Abrasive Use: 27-90kg @ 125psi per hour (dependant on nozzle size)
- Hose Length: 2400mm
- Hose OD: 24mm
- Hose ID: 12mm
- Tank Dimensions: 508(H) x 305(Ø)
- Nett Weight: 19kg
- Carton: 770 x 420 x 370mm
- Weight: 21kg
Intended Use
Blasting work utilising compressed air with recommended abrasive media and/or glass beads to clean and abrade a surface, typically metal, of any rust, paint or other unwanted surface materials.
(0 reviews) -
Work Benches & StorageTQB BRANDS Mobile Tear Down Bench
The TradeQuip “Made for the Trade” Mobile Tear-Down Bench combines the strength of heavy-duty enamelled steel with the convenient mobility of four 360° lockable swivel castors. Ideal for automatic transmission and engine parts repair, this unit has a top that angles slightly to a fluid drain feature. Fluids are safely contained in a removable plastic bin (8 Litre capacity) or the unit may be connected to a centralised drain system. With ergonomic adjustable leg height this work bench is easy setup for safe comfortable operation in any part of the workshop with heavy duty 100mm castors (2 rigid & 2 lockable swivel).
This workbench is great as a middle-of-the-workshop assembly table, extra worktop, or even a primary workbench for smaller workshops . When in the desired position, engage the swivel wheel castor brakes to avoid any unwanted movement. The rugged, all-purpose design goes where you need it to… and stays there to get the job done…
Fitted with adjustable work height, this workbench offers comfort and less back strain resulting in more productivity. The 14 gauge 1200 x 640mm table top has a 13mm rim that will contain all liquids. This work bench is fitted with a lockable drawer for security, alongside a removable (polyethylene) drain pan for convenience.
Versatile and undeniably strong, TradeQuip “Made for the Trade” workbenches are developed with sophisticated designs to endure demanding industry and heavy duty commercial applications.
Features
- Ideal for Engine and Transmission Rebuilds
- Heavy Duty Rolled Edge Steel Construction
- Convenient Removable Drain Bowl
- 13mm Bench top Rim to contain Leaking Fluids
- Quality Castors (2 swivel with brake)
- Key Lockable Steel Drawer with Ball Bearing Slides
- High Gloss Enamel Paint Finish
Specifications
- Load Capacity: 250kg
- Bench Top Capacity: 150kg
- Bench Top: 1200(L) x 640(W)mm (with 13mm rim)
- Shelf Capacity: 100kg
- Shelf: 1110(L) x 460(W)mm
- Drain Bowl Capacity: 8 Litres
- Castor Wheels: 100(D) x 25(W)mm
- Dimensions: 1200(L) x 640(W) x 875(H)mm
- Nett Weight: 56.5kg
- Carton: 1250(L) x 740(W) x 240(H)mm
- Gross Weight: 62kg
(0 reviews) -
Work Benches & StorageTQB BRANDS Mobile Workbench
The TradeQuip “Made for the Trade” Mobile Workbench combines the strength of heavy-duty enamelled steel with the convenient mobility of two 360° lockable swivel castors. Designed for easy maneuverability on uneven surfaces, each castor locks fully in place to hold the workbench steady for projects requiring precision. It’s even stylish enough to roll up next to the BBQ for backyard get-togethers. Easy to move in any direction this workbench is great as a middle-of-the-workshop assembly table, extra worktop, or even a primary workbench for smaller workshops. When in the desired position, engage the two swivel wheel castor brakes to avoid any unwanted movement. The rugged, all-purpose design goes where you need it to… and stays there to get the job done…
Versatile and undeniably strong, TradeQuip workbenches are developed with sophisticated designs to endure demanding industry and heavy duty commercial applications.
Features
- Sturdy steel construction workbench
- Bottom shelf that allows unobstructed access
- High gloss enamel finish
- Quality castors – two fixed and two locking swivel
- Heavy-duty handle
Specifications
- Load Capacity: 300kg
- Bench Top Thickness: 3mm
- Work Surface: 1100 x 700mm
- Dimensions: 1100(L) x 700(W) x 830(H) mm
- Nett Weight: 60kg
- Carton: 1140 x 740 x 110mm
- Gross Weight: 63kg
(0 reviews) -
Work Benches & StorageTQB BRANDS Mobile Workshop Table
The Heavy Duty steel construction makes this TradeQuip “Made for the Trade” Mobile Workshop Table durable enough for moving tools and car parts to and from the vehicle. Easily handles loads up to 45kg. Solid composite rubber castors ensure you can manoeuvre this mobile workshop table around the workshop without marring the floor. The height adjustment gives you plenty of options for lowered cars or SUV’s. This very versatile mobile work top makes any installation or service work flow more efficiently for auto repairers and installation workshops.
Features
- Strong tubular steel construction
- Handy tool storage holders
- Protective Bumper for top tray
- Smooth rolling composite rubber castors
- Height adjustable to most vehicles
- Sturdy main support post
Specifications
- Safe Working Capacity: 45kg
- Adjustable Working Height: 930-1270mm
- Castor Wheel Diameter: 75mm
- Table Top Dimensions: 809L x 475W x 42Hmm
- Main Tray Dimensions: 580L x 308W x 38Hmm
- Overall Dimensions: 870L x 755W x 930Hmm
- Nett Weight: 19.5kg
(0 reviews) -
Work Benches & StorageTQB BRANDS Mobile Workshop Table – 1 Drawer
Featuring a convenient drawer, the Heavy Duty steel construction makes this TradeQuip “Made for the Trade” Mobile Workshop Table durable enough for moving tools and car parts to and from the vehicle. Easily handles loads up to 80kg. Ball bearing castors ensure you can manoeuvre this mobile workshop table around the workshop. Including 3 compartments and 6 mounting holes, the height adjustment gives you plenty of options for lowered cars or SUV’s. This very versatile mobile work top makes any installation or service work flow more efficiently for auto repairers and installation workshops
Features
- Height adjustable to most vehicles
- Ball Bearing wheels for easy moveablilty
- Multi-functional top table with 3 compartments and 6 screwdriver holes
- Top EVA mat for skid resistance
- Extra drawer for more storage room
Specifications
- 340 x 300 x 45mm Drawer
- Adjustable from 860-1200mm
- Includes Drawer and Top Tray Liner
- 80kg Distributed Load Capacity
- 730 x 500 x 25mm
- Gross Weight: 20kg
(0 reviews) -
Motorcycle LiftersTQB BRANDS Motorcycle Lifter 360kg
This TradeQuip Hydraulic Motorcycle Lifter has a safe working capacity of up to 360kg. Our design features include a full steel ramp, scissor lift technology and convenient mobility with 2 swivel and 2 fixed castors. The base frame is made of quality steel tube and the platform is manufactured of checker plate. Front wheel clamping jaws are step-less (up to 135mm) with stability assured via the crank handle. A quality hydraulic foot pump easily raises and lowers the ATV/Bike load… whilst the automatic safety lock delivers piece of mind safety and security. “Made for the Trade” quality swivel castors provide smooth, stable and convenient mobility. This TradeQuip Hydraulic Motorcycle Lifter comes complete, with an ‘extra-large’ (removable) loading ramp which is also caters for most motorcycles with kickstands. The 2102T Motorcycle Lifters robust and versatile construction, includes a front wheel vice and 4 hook mounts to safely secure any load up to 360kg.
Features- Designed to deliver a safe working lifting device for use with motorcycles, ATV’s, ride-ons, personal watercraft, and snowmobiles
- Two adaptor bars provide additional clearance for high chassis motocross bikes
- Automatic load locking bar for safety
- Quality swivel castors, for easier to positioning and moving around the workshop
- High gloss enamel paint finish
- Does not include tie down straps
Specifications- Safe Working Capacity: 360kg
- Minimum Height: 205mm
- Maximum Height: 780mm
- Platform Length: 1345mm
- Platform Width: 490mm
- Castors:
- Nett Weight: 95kg
- Crate: 1500 x 680 x 310mm
- Gross Weight: 115kg
Intended Use
Lifts motorcycles, ATV’s, ride-on mowers and snowmobiles for servicing, repair work and new vehicle preparation.
(0 reviews) -
Motorcycle LiftersTQB BRANDS Motorcycle Lifter 450kg
This TradeQuip “Made for the Trade” Hydraulic Motorcycle Lifter has a safe working capacity of up to 450 kg. The hydraulic foot pump raises and lowers ATV/Bike while the automatic safety lock makes sure you are safe and secure the entire time. This professional quality 11 gauge steel plate construction makes this hydraulic lifter one of the strongest on the Australian market. The hydraulics system operates via a dual pedal mechanism. One pedal raises the Lifter while the other lowers it. This Lifter is also designed with safety in mind, the features include a wheel vice chock, stop plate, and tie-down strap access ports. It’s diamond plating surface minimises tyres slipping and sliding as you work on your bike. The built-in swivel castors provide convenient mobility and stability when you need it and the lockable bolts ensure its secure when you don’t. The TradeQuip Hydraulic Motorcycle Lifter is complete with an extra-large removable loading ramp which is also suitable for motorcycles with kickstands. The lifters robust and versatile construction, includes in a front wheel vice and 4 hook mounts for securing the load.
Our TradeQuip Hydraulic Motorcycle Lifter is the perfect solution for professional workshops or home mechanics that want to take their maintenance and servicing to the next level. This unit is bigger, stronger, heavier and lifts higher than similar looking bike lifts sold in Australia. Bending down and getting on your hands and knees whilst servicing will be a thing of the past when you can easily lift your bike to an optimal working level. Stability and security will not be an issue, the 45 degree front wheel clamp along with the 4 tie-down points will allow you to prevent any unwanted movement of the bike. Underneath the platform is a professional quality steel frame, an adjustable locking device to prevent accidental lowering and a high quality 500kg rated capacity hydraulic ram. – rated to 450kg at 750mm lift height (weight capacity reduces over this height)
Features:
- Designed to deliver the ideal lift for use with motorcycles, ATV’s, tractors, personal watercraft, and snowmobiles
- Locking bar for safety
- Powder coated structural heavy duty steel construction
- Extra Long Full width loading ramp
- Step-less rate of lowering irrespective of the load
- Oil trap plate for easy drainage
- 2 foot pedals for raising & lowering – for easy hands free operation
- Fitted with 2 position platform locking device to prevent accidental lowering
- Adjustable oversize rubber lined front wheel clamp
- Quality wheels and swivel castors making it easier to position and move around
- Lockdown bolts to prevent unwanted movement during use
- Does not include tie down straps
Specifications
- Safe Working Capacity: 450kg
- Minimum Height: 175mm
- Maximum Height: 750mm
- Platform Length: 2200mm
- Platform Width: 680mm
- Recommended Wheelbase (Axle to axle length): 1600mm
- Maximum OD of Tyre: Should not exceed 18″
- Castor Wheels:
- Nett Weight: 120kg
- Crate: 2265x750x200mm
- Gross Weight: 151kg
Intended Use
Lifts motorcycles, ATV’s, ride-on mowers and snowmobiles for servicing, repair work and new vehicle preparation.
(0 reviews) -
Motorcycle LiftersTQB BRANDS Motorcycle Lifter 500kg
This TradeQuip “Made for the Trade” Motorcycle Lifter Support Stand has a safe working capacity of up to 500 kg. It is designed to elevate motorcycles, ATVs, riding mowers or snowmobiles to make repairs and maintenance easier and more comfortable. Our TradeQuip scissor style support stand is suitable for use either on a motorcycle lift or on the floor. The top of the platform has two sliding “U” shaped supports enabling the lifter to hold motorcycle subframe down tubes. Adjust the height of the scissor mechanism by rotating the screw adjuster manually.
Our TradeQuip Motorcycle Lifter is the perfect accessory lifter for professional workshops that want to take their maintenance and servicing to the next level. This unit is bigger, stronger, heavier and lifts higher than similar looking bike lifts sold in Australia. Trying to get the back wheel off the ground whilst servicing will be a thing of the past when you can easily and safely lift the bikes back wheel off the platform lifter whilst it is up in the air.
Features:
- Designed to deliver the ideal lift for use with motorcycles, ATV’s, tractors, personal watercraft, and snowmobiles
- Lifts back wheel off lift table for tyre/wheel change
- Powder coated structural heavy duty steel construction
- Rotate the lead screw to adjust and raise the lift
- Bolt down lugs to prevent unwanted movement during use
Specifications
- Safe Working Capacity: 500kg
- Minimum Height: 95mm
- Maximum Height: 420mm
- Platform Dimensions: 450x150mm
- Nett Weight: 13.8kg
- Carton: 550x355x110mm
- Gross Weight: 14.7kg
Intended Use
Lifts motorcycles, ATV’s, ride-on mowers and snowmobiles for servicing, repair work and new vehicle preparation.
(0 reviews) -
Motorcycle LiftersTQB BRANDS Motorcycle Lifter Air Actuated 680kg
This TradeQuip Air/Hydraulic Motorcycle Lifter has a safe working capacity of up to 680 kg. The hydraulic foot pump raises and lowers ATV/Bike while the automatic safety lock makes sure you are safe and secure the entire time. The TradeQuip Air/Hydraulic Motorcycle Lifter is complete with an extra large removable loading ramp which is also suitable for motorcycles with kickstands. The lifters robust and versatile construction, includes in a front wheel vice and 2 hook mounts for securing the load.
Features:
- Designed to deliver the ideal lift for use with motorcycles, ATV’s, tractors, personal watercraft, and snowmobiles
- Locking bar for safety
- Powdercoated structural heavy duty steel construction
- Extra Long Full width loading ramp
- Stepless rate of lowering irrespecitve of the load
- Oil trap plate for easy drainage
- 2 foot pedals for raising & lowering – for easy hands free operation
- Fitted with 2 position platform locking device to prevent accidental lowering
- Adjustable oversize rubber lined front wheel clamp
- Lockdown bolts to prevent unwanted movement during use
- Does not include tie down straps
Specifications
- Safe Working Capacity: 680kg
- Minimum Height: 185mm
- Maximum Height: 825mm
- Platform Dimensions: 710mm x 2000mm
- Required Air Pressure: 0.75-0.85Mpa
- Nett Weight: 169kg
- Crate: 2050x845x273mm
- Gross Weight: 210kg
Intended Use
Lifts motorcycles, ATV’s, ride-on mowers and snowmobiles for servicing, repair work and new vehicle preparation.
(0 reviews) -
Motorcycle LiftersTQB BRANDS Motorcycle Lifter Extension Kit
This TradeQuip Air/Hydraulic Motorcycle Lifter Extension Kit includes two lift table width extenders and two ramp extenders. Suits 2103T TradeQuip Motorcycle Lifter
Features:
- Powder coated structural heavy duty steel construction
- Does not include tie down straps
- Suits 2103T TradeQuip Motorcycle Lifter
Specifications
- Safe Working Capacity: 680kg
- Includes 2x 2000x254mm Lift Table Width Extender
- Includes 2x 550x254mm Ramp Width Extender
- Nett Weight: 56kg
- Gross Weight: 60kg
Intended Use
Extends the ramp width when used in conjunction with the 2013T TradeQuip Motorcycle Lifter.
NOTE: 2103T TradeQuip Motorcycle Lifter sold separately
(0 reviews) -
Oil Drainers & PumpsTQB BRANDS Oil Drainer Self Evacuating 65Litre
TradeQuip “Made for the Trade” mobile waste oil drainers are designed to collect, store and carry waste oil and coolant from the service bay to bulk waste oil storage. Practical design including oversize drain bowls, sight gauges and integrated drain hose minimise the risk of operator exposure and spillage. Reservoirs are available in a range of convenient sizes and equipped for quick emptying with low pressure air. This 65Litre gravity fed waste portable oil drainer is fitted with a long 2m x 25.4mm discharge hose and has a 18 litre steel telescopic collection pan with an easy to read oil reservoir level indicator. The heavy duty castors make it easy to manoeuvre around the workshop via the chrome plated pull-along handle and discharge is by low air pressure care of the safety relief valve. (Previous models include product code/s; BOD1906, 1907T)
Note: If the workshop compressor supplies air pressure in excess of 0.5 Bar, an inline air regulator must be used to maintain air pressure at 0.5 Bar.
Features
- Collects, transfers and evacuates used engine oils, transmission fluids, power steering fluids etc
- Top quality heavy-gauge steel collection tank
- Telescopic drain pan adjusts to optimal working height
- Offset drain bowl eliminates the need to reposition the tank, reducing the chance of spillage
- Tank oil level indicator sight gauge prevents overfill
- Air pressure relief valve prevents over-pressurisation
- Sturdy rubber front wheels and ball bearing-mounted rear castors provide stability and easy maneuverability
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish
- Painted finish is oil, grease and dirt-resistant for easy cleanup
- Oil, heat, ozone and abrasion resistant drain hose
- Easy to clean chrome handle
- Not for use with corrosive or flammable fluids
Specifications
- Tank Capacity: 65 Litres
- Drain Pan Capacity: 18 Litres
- Drain Pan Catchment Opening: 500(L) x 300(W)mm
- Maximum Telescopic Height: 1650mm
- Minimum Height: 1080mm
- Air Inlet: 1/4″
- Working Pressure: 0.5 – 0.8 bar (7-11.6psi)
- Ball Bearing Castor Wheels for easy manoeuvrability
- Dimensions: 1650(H) x 600(L) x 390(W)mm
- Nett Weight: 23kg
- Carton: 750 x 425 x 540mm
- Gross Weight: 25kg
Warning: This unit is not for the extraction, siphoning or storing of Petroleum or other highly Flammable Liquids.
Intended use
This oil drainer is designed to drain waste oil from engines, gearboxes, differentials of most vehicles.
(0 reviews) -
Oil Drainers & PumpsTQB BRANDS Oil Drainer with Hand Pump 65Litre
The TradeQuip “Made for the Trade” Truck Oil Drain Pan offers a low-profile design that can be easily positioned under high-clearance vehicles for capturing used fluids including engine oil, coolant and transmission fluid.
This model features a 65 Litre capacity reservoir moulded from robust, lightweight high-impact polypropylene and is mounted on four 100mm diameter swivel castors. The drains offer a choice of three discharge methods.
Designed for positioning under high-clearance vehicles, this low-profile oil drainer captures/discharges used fluids via the rotary hand pump mounted horizontally on the front of the reservoir and discharge hose installed at the outlet. Mounted on four, 100mm diameter swivel castors, each truck drain has an overall clearance height of only 195 millimetres.
Features
- Lightweight high-impact polypropylene
- Suitable for engine oil, coolant and transmission fluid
- Built-in rotary hand discharge pump
- Removable metal filter screen
- Smooth rolling rubber castor wheels
Specifications
- Pan Capacity: 65Litres
- Swivel Castor Wheels: 100mm
- Discharge Hose Length: 1800mm
- Minimum Clearance: 195mm (Pan Height)
- Material: Industrial Grade Polypropylene
- Tank Size: 1300(H) x 730(L) x 200(W)mm
- Weight: 21kg
- Carton: 1140 x 730 x 200mm
Intended use
This oil drain pan is designed to drain waste oil from engines, gearboxes, differentials of heavy vehicles.
(0 reviews) -
Work Benches & StorageTQB BRANDS Parts Storage Bin Rack 22Bin
This portable TradeQuip “Made for the Trade” rack of storage bins can be used to store small tools, nuts, bolts, parts, hobby gear and more! Just lift out the bins you need, take them to your work area, fill them up and put them back in place when you’re done. Each of the nine tiers is built sturdy and tough to hold a wide assortment of items. A great set of storage bins for busy but tidy workshops and garages.
Features- Sturdy five-tier steel powder coated rack
- Zinc plated wire shelving with bin locating guides
- Quick & easy clip together adjustable shelves
- Stackable bins made of moulded polypropylene
- Unique design provides plenty of storage
- Ideal for garage, workshop, office, shed
- Powder coat frame resists corrosion
- Easy to assemble
- Quality swivel castors (2x lockable)
- Convenient access to removable bins
Specifications
- Working Load Capacity: 100kg
- 15 Parts Bins: 345x105x75mm (3kg Load Capacity)
- 4 Parts Bins: 345x140x150mm (5kg Load Capacity)
- 3 Parts Bins: 345 x 205 x 150mm (8kg Load Capacity)
- Swivel Castor Diameter: 100mm
- Overall Dimensions: 880(L) x 410(W) x 950(H)mm
- Carton Size: 880(L) x 430(W) x 430(H)mm
- Weight: 30kg
(0 reviews) -
Work Benches & StorageTQB BRANDS Parts Storage Bin Rack 36Bin
This TradeQuip “Made for the Trade” rack of storage bins can be used to store small tools, nuts, bolts, parts, hobby gear and more! Just lift out the bins you need, take them to your work area, fill them up and put them back in place when you’re done. Each of the nine tiers is built sturdy and tough to hold a wide assortment of items. A great set of storage bins for busy but tidy workshops and garages.
Versatile and undeniably strong, TradeQuip workbenches are developed with sophisticated designs to endure demanding industry and heavy duty commercial
Features
- Sturdy nine-tier steel powder coated rack
- Zinc plated wire shelving with bin locating guides
- Quick & easy clip together adjustable shelves
- Stackable bins made of moulded polypropylene
- Unique design provides plenty of storage
- Ideal for garage, workshop, office & shed
- Powder coat frame resists corrosion
- Easy to assemble
- Quality Swivel Castor (2x Lockable)
- Convenient access to removable bins
Specifications
- Safe Working Capacity: 200kg
- 15 Parts Bins: 345 x 105 x 75mm (3kg Load Capacity)
- 12 Parts Bins: 345 x 140 x 150mm (5kg Load Capacity)
- 9 Parts Bins: 345 x 205 x 150mm (9kg Load Capacity)
- Swivel Castor Diameter: 100mm
- Dimensions: 880(L) x 40(W) x 1705(H) mm
- Nett Weight: 50kg
(0 reviews) -
Parts WashersTQB BRANDS Parts Washer 180Litre
This top quality TradeQuip “Made for the Trade” Large Parts Washer is perfect for cleaning down most components prior to assembly. It is designed and manufactured to TradeQuip Quality Standards and has a very sturdy steel construction and quality enamelled finish. The “Quick Close” fire safe lid mechanism ensures operator protection in case of fire. The unit has a built in replacement cleaning fluid filter and easy maintenance 240V ‘High Volume’ cleaning fluid pump. Fitted with “Standards Australia Approved” 10Amp plug and cable.
Warning: For use with aqueous (water) based solutions only. Petroleum based cleaning fluids are harmful and will damage the pump and void the warranty.
Features
- Sturdy metal construction
- Quality enamelled gloss finish
- Enclosed “High Volume” electric pump and fully screened pump housing
- Built-in replaceable pump inlet filter
- Chromed flexible metal fluid delivery pipe
- Large removable parts cleaning shelf for inspection and drying
- Immersion soaking when parts cleaning shelf removed
- Non welded one-piece tank
- Suitable for use with aqueous water based cleaning fluids
- Fire Safety Auto Drop Down Lid
- Replacement parts available
Specifications
- Pump Power: 240V/50Hz/0.5A
- Pump Output: 3.15 Litres per minute
- Tank Dimensions: 1135(L) x 545(W) x 320(H)mm
- Minimum Cleaning Fluid Capacity: 33Litres
- Maximum Cleaning Fluid Capacity: 90 Litres
- Overall Dimensions: 1150(L) x 560(W) x 1430(H)mm
- Nett Weight: 42kg
- Carton: 1140 x 550 x 330mm
- Gross Weight: 45kg
OEM Replacement Parts
Pump: Product Code#1005
Flexible Hose: Product Code #1003-1
Switch: Product Code #1003-4
Filter: Product Code #1003-5
Pump & Housing Assembly: Product Code #1003-6
“Fire Safe” Hinge Assembly: Product Code #1003-7
“Fire Safe” Fusible Link: Product Code #1003-FL
*Warning: For use with aqueous (water) based solutions only. Petroleum based cleaning fluids are harmful and will damage the pump and void the warranty.
Intended Use
Best suited for low-volume items, this Parts Washer is typically ideal for cleaning smaller parts, where contaminants can be removed with a brush under low pressure.
(0 reviews) -
Parts WashersTQB BRANDS Parts Washer 90Litre
This top quality TradeQuip “Made for the Trade” Parts Washer is perfect for cleaning down most components prior to assembly. It is designed and manufactured to TradeQuip Quality Standards and has a very sturdy steel construction and quality enamelled finish. The “Quick Close” fire safe lid mechanism ensures operator protection in case of fire. The unit has a built in replacement cleaning fluid filter and easy maintenance 240V ‘High Volume’ cleaning fluid pump. Fitted with “Standards Australia Approved” 10Amp plug and cable.
Warning: For use with aqueous (water) based solutions only. Petroleum based cleaning fluids are harmful and will damage the pump and void the warranty.
Features
- Sturdy metal construction
- Quality enamelled gloss finish
- Enclosed “High Volume” electric pump and fully screened pump housing
- Built-in replaceable pump inlet filter
- Chromed flexible metal fluid delivery pipe
- Large removable parts cleaning shelf for inspection and drying
- Immersion soaking when parts cleaning shelf removed
- Non welded one-piece tank
- Quick Close fire safe lid mechanism
- Suitable for use with aqueous water based cleaning fluids
- Replacement parts available
Specifications
- Tank Volume: 90Litres
- Pump Power: 240V/50Hz/0.5A
- Pump Output: 3.15 Litres per minute
- Tank Dimensions: 758(L) x 527(W) x 275(H)mm
- Minimum Cleaning Fluid Capacity: 18Litres
- Maximum Cleaning Fluid Capacity: 45 Litres
- Overall Dimensions: 780(L) x 540(W) x 908(H)mm
- Nett Weight: 23kg
- Carton: 790 x 550 x 320mm
- Gross Weight: 26kg
OEM Replacement Parts
Pump: Product Code#1005
Flexible Hose: Product Code #1003-1
Switch: Product Code #1003-4
Filter: Product Code #1003-5
Pump & Housing Assembly: Product Code #1003-6
Switch: Product Code #1003-4
“Fire Safe” Hinge Assembly: Product Code #1003-7
“Fire Safe” Fusible Link: Product Code #1003-FL
Intended Use
Best suited for low-volume items, this Parts Washer is typically ideal for cleaning smaller parts, where contaminants can be removed with a brush under low pressure.
*Warning: For use with aqueous (water) based solutions only. Petroleum based cleaning fluids are harmful and will damage the pump and void the warranty.
(0 reviews) -
Parts WashersTQB BRANDS Parts Washer Brush & Hose
This top quality TradeQuip “Made for the Trade” parts washer brush is perfect for cleaning down most components prior to assembly. It is designed and manufactured to TradeQuip Quality Standards and has a very stiff and sturdy poly/plastic bristles. The TradeQuip Parts Washer Brush is a replacement brush for most TradeQuip Parts Washers. Features poly/plastic bristles designed to work with water based solvents to remove grease and grime.
Features
- Sturdy polymer construction
- Poly/plastic bristles work with solvent to remove grease and grime
- Suits parts washers with chromed flexible metal fluid delivery pipes
- Suitable for use with aqueous water based cleaning fluids
- Not suitable for solvent or petroleum based fluids
- Includes brush and hose
- Works with TradeQuip parts washers (Code/s 1003, 1004 and 1050, sold separately)
Specifications
- Polymer Brush and Handle Length: 260mm
- Rubber Hose Length: 670mm
- Hose Nipple ID: 15mm
- Bristle Length: 75mm
- Bristle Diameter: 35mm
- Weight: 300g
*Warning: For use with aqueous (water) based solutions only. Petroleum based cleaning fluids are harmful and will damage the pump and void the warranty.
(0 reviews) -
Parts WashersTQB BRANDS Parts Washer Concentrate 10Litre
Our TradeQuip “Made for the Trade” Parts Washer Concentrate is a water-based, safer alternative to solvent based degreasers. It is specifically formulated for cleaning and degreasing automotive, engineering and industrial parts in TradeQuip Parts Washers, Ultrasonic Cleaners and washable surfaces.
10Litres makes 50Litres
The TradeQuip Parts Washer Concentrate rapidly solubilises grease deposits and oily films in the presence of heavy grime loads. Free from petroleum, solvents, aromatic compounds, phenols, chlorinated solvents and biologically hard ingredients. When used as recommended, TradeQuip Parts Washer Concentrate will not affect rubber, plastics, glass, fully cured paintwork and most metals. It inhibits ferrous metal corrosion, exhibits excellent detergency and does not form stable emulsions, making it suitable for oil and solvent recovery equipment.
Direction for Use
Dilute the concentrate with cold or warm water. Apply solution with brush or dip the parts in the immersion wash tank for a few minutes. Brush and scrubbing may be required for difficult shapes and heavy soiled surfaces. Rinse with clean water and dry completely. Rust protection coating is required after washing process for ferrous metals before storage. Always wear PPE and safety glasses.
TradeQuip “Made for the Trade” Parts Washer Concentrate should be stored and transported securely in an upright position. Ensure the cap is fully closed. Store for up to 24 months from date of manufacture when stored in original, unopened packaging under dry conditions within the temperature range of +5°C to +30°C and out of direct sunlight. Protect from frost. Distributors should always rotate stock. When stored as stated, shelf life is 2 years from the production date label on the original TradeQuip container.
Features
- Dilution Rate: 1part concentrate to 5parts water
- Suitable for use in all TQB Brands Parts Washers & Ultrasonic Cleaners
- Adjust the concentration to achieve desired result
- Free from petroleum, solvents and biologically hard ingredients
- Will not affect rubber, plastic, glass, fully cured paintwork and most metals
- Avoid contact of strong solutions with unprotected polished aluminium, magnesium and alloys
- Always rinse off any work piece thoroughly after use
Specifications
- 10 Litres makes up to 50 Litres of parts washer solution
- Environmentally Friendly
- Non-toxic
- Non-caustic
- Non-flammable
- Bio-degradable
- Non-hazardous
First Aid Information:
If poisoning occurs, contact doctor or poisons information centre
If swallowed, do not induce vomiting give a glass of water
If in eyes, hold eyes open, flood eye with water for at least 15 minutes and see doctor(0 reviews) -
Parts WashersTQB BRANDS Parts Washer Concentrate 20Litre
Our TradeQuip “Made for the Trade” Parts Washer Concentrate is a water-based, safer alternative to solvent based degreasers. It is specifically formulated for cleaning and degreasing automotive, engineering and industrial parts in TradeQuip Parts Washers, Ultrasonic Cleaners and washable surfaces.
20Litres makes 100Litres
The TradeQuip Parts Washer Concentrate rapidly solubilises grease deposits and oily films in the presence of heavy grime loads. Free from petroleum, solvents, aromatic compounds, phenols, chlorinated solvents and biologically hard ingredients. When used as recommended, TradeQuip Parts Washer Concentrate will not affect rubber, plastics, glass, fully cured paintwork and most metals. It inhibits ferrous metal corrosion, exhibits excellent detergency and does not form stable emulsions, making it suitable for oil and solvent recovery equipment.
Direction for Use
Dilute the concentrate with cold or warm water. Apply solution with brush or dip the parts in the immersion wash tank for a few minutes. Brush and scrubbing may be required for difficult shapes and heavy soiled surfaces. Rinse with clean water and dry completely. Rust protection coating is required after washing process for ferrous metals before storage. Always wear PPE and safety glasses.
TradeQuip “Made for the Trade” Parts Washer Concentrate should be stored and transported securely in an upright position. Ensure the cap is fully closed. Store for up to 24 months from date of manufacture when stored in original, unopened packaging under dry conditions within the temperature range of +5°C to +30°C and out of direct sunlight. Protect from frost. Distributors should always rotate stock. When stored as stated, shelf life is 2 years from the production date label on the original TradeQuip container.
Features
- Dilution Rate: 1part concentrate to 5parts water
- Suitable for use in all TQB Brands Parts Washers & Ultrasonic Cleaners
- Adjust the concentration to achieve desired result
- Free from petroleum, solvents and biologically hard ingredients
- Will not affect rubber, plastic, glass, fully cured paintwork and most metals
- Avoid contact of strong solutions with unprotected polished aluminium, magnesium and alloys
- Always rinse off any work piece thoroughly after use
Specifications
- 20 Litres makes up to 100 Litres of parts washer solution
- Environmentally Friendly
- Non-toxic
- Non-caustic
- Non-flammable
- Bio-degradable
- Non-hazardous
First Aid Information:
If poisoning occurs, contact doctor or poisons information centre
If swallowed, do not induce vomiting give a glass of water
If in eyes, hold eyes open, flood eye with water for at least 15 minutes and see doctor(0 reviews) -
Parts WashersTQB BRANDS Parts Washer Pump
This top quality TradeQuip “Made for the Trade” submersible Parts Washer Pump is a direct replacement for the pumps fitted to 15Litre 90Litre & 180Litre TradeQuip Parts Washers.
Suitable for use with water based parts cleaning fluids TradeQuip 5082-3-4-5T.
Flexible pipe also available.
Features
- Sturdy poly/plastic body
- Stainless steel shaft
- Suits parts washers with chromed flexible metal fluid delivery pipes
- Snap off inlet grill for easy cleaning
- Suitable for use with aqueous water based cleaning fluids
- Works with TradeQuip parts washers (Code/s 1003T, 1004T and 1050, sold separately)
Specifications
- Power: 230V 50Hz 26W 0.6Amp
- Cable Length: 305mm
- HeadMax: 1.8m
- Flowrate: 3.15 Litres per minute
- Outlet Thread: 1/2″ NPT Female
- Dimensions: 100(L) x 85(H) x 65(W) mm
- Weight: 1kg
(0 reviews) -
Drilling MachinesTQB BRANDS Pedestal Drill 12Speed 2HP
The same reliable ‘Heavy Duty Industrial Quality Drill Press’ since we started manufacturing them in 1984… but with the benefit of some 21st Century features.
The Borum Industrial Drill Press delivers precision and power—and is designed to handle the demands of a professional workshop environment. With a very powerful long-life industrial quality 2 HP motor (that’s fully enclosed in a durable metal hood) double-wide spindle bearings and a precision spindle, this is one very strong and reliable drilling machine. Equipped with 12 drilling speeds from 210 to 2,160rpm and a huge 32mm drilling capacity this robust and user-friendly drill press is ideal for a busy maintenance workshop or production factory. Perfect for fabricators looking for a drill press that’s rugged enough to handle the demands of medium and heavy duty production work and accurate enough to consistently deliver precise results. (Previous models include product code/s; CH30)
Features
- Flexible work light
- Oversize micro-switch activated safety guard
- Ergonomic handles
- Low-noise belt drive with cast iron balanced pulleys ensures low maintenance and quiet operation
- Precision spindle bearing for long life and high accuracy
- Table control via hand crank and gear rack is robust with high load capacity
- Long quill stroke with easy to adjust depth stop at the capstan handle
- Thick-walled, precision-ground column for extra rigidity
- Safety ON-OFF switch fitted with a dust cover and positive action push buttons plus a large (Red) self locking “Emergency Stop” hinge cover
- Powerful long-life commercial drive motor provides high reliability even at continuous loads
- Ground set-up areas on table and base plate
- Solid work table with diagonal clamping slots
- Full range of Spare Parts available in Australia!
Specifications
- Motor: 240V 2HP
- Number of Speeds: 12
- Spindle Speeds: 210-2160rpm
- Maximum Drilling Capacity: 32mm
- Spindle Taper: MT4
- Chuck: 16mm
- Chuck Guard: 190L x 200H x 110D mm
- Maximum Spindle Stroke: 122mm
- Swing: 535mm
- Maximum Distance from Spindle to Table: 720mm
- Maximum Distance from Spindle to Base: 1230mm
- Diameter of Column: 92mm
- Size of Table: 473x410mm
- Size of Base: 572x495mm
- Overall Height: 1780mm
- Weight: 148kg
- Carton: 1460 x 600 x 530mm
Intended Use
This device is used for producing holes in hard substances. A selected drill (drilling) bit is held in a rotating spindle and is fed into a workpiece, which is usually clamped in a vice resting on the adjustable table. The drill bit may be gripped in a chuck with three jaws, or it may have a tapered shank that fits into a tapered hole in the spindle. This Drill Press offers varying the spindle speeds and is intended for use with drill bits only.
(0 reviews) -
Drilling MachinesTQB BRANDS Pedestal Drill 16Speed 1HP
The same reliable ‘Heavy Duty Industrial Quality Drill Press’ since we started manufacturing them in 1984… but with the benefit of some 21st Century features.
The Borum Industrial Drill Press delivers precision and power—and is designed to handle the demands of a professional workshop environment. With a powerful long-life industrial quality 1 HP motor (that’s fully enclosed in a durable metal hood) double-wide spindle bearings and a precision spindle, this is one very reliable drilling machine. Equipped with 16 drilling speeds from 200 to 3,160rpm and a 20mm drilling capacity this robust and user-friendly drill press is ideal for a busy maintenance workshop or small production factory. Perfect for fabricators looking for a drill press that’s rugged enough to handle the demands of light and medium duty production work and accurate enough to consistently deliver precise results. (Previous models include product code/s; CH18F)
Features
- Flexible work light
- Oversize micro-switch activated safety guard
- Engineering style work table
- Ergonomic handles
- Low-noise belt drive with cast iron balanced pulleys ensures low maintenance and quiet operation
- Safety ON-OFF switch fitted with a dust cover and positive action push buttons plus a large (Red) self locking “Emergency Stop” hinge cover
- Precision spindle bearing for long life and high accuracy
- Table control via hand crank and gear rack is robust with high load capacity
- Long quill stroke with easy to adjust depth stop at the capstan handle
- Thick-walled, precision-ground column for extra rigidity
- Powerful long-life commercial drive motor provides high reliability even at continuous loads
- Ground set-up areas on table and base plate
- Solid rotating work table with diagonal clamping slots
- Full range of Spare Parts available in Australia!
Specifications
- Motor: 240V 1HP
- Number of Speeds: 16
- Spindle Speeds: 200-3160rpm
- Maximum Drilling Capacity: 20mm
- Spindle Taper: MT2
- Chuck: 16mm
- Maximum Spindle Stroke: 82mm
- Swing: 430mm
- Maximum Distance from Spindle to Table: 775mm
- Maximum Distance from Spindle to Base: 1270mm
- Diameter of Column: 80mm
- Diameter of Table: 350mm
- Size of Base: 460x270mm
- Overall Height: 1625mm
- Weight: 85kg
- Carton: 1390 x 530 x 265mm
Intended Use
This device is used for producing holes in hard substances. A selected drill (drilling) bit is held in a rotating spindle and is fed into a workpiece, which is usually clamped in a vice resting on the adjustable table. The drill bit may be gripped in a chuck with three jaws, or it may have a tapered shank that fits into a tapered hole in the spindle. This Drill Press offers varying the spindle speeds and is intended for use with drill bits only.
(0 reviews) -
Drilling MachinesTQB BRANDS Pedestal Drill 16Speed 3/4HP
This “Borum Industrial Drill Press” delivers precision and power… and is designed to handle the demands of a professional workshop environment. With a powerful long-life industrial quality 3/4 HP motor (that’s fully enclosed in a durable metal hood) double-wide spindle bearings and a precision spindle, this is one very reliable drilling machine. Equipped with 16 drilling speeds from 162 to 3,000rpm and a 16mm drilling capacity this robust and user-friendly drill press is ideal for a busy maintenance workshop or small production factory. Perfect for fabricators looking for a drill press that’s rugged enough to handle the demands of light and medium duty production work and accurate enough to consistently deliver precise results. (Previous models include product code/s; CH16NF)
Features
- Flexible work light
- Oversize micro-switch activated safety guard
- Engineering style work table
- Ergonomic handles
- Low-noise belt drive with cast iron balanced pulleys ensures low maintenance and quiet operation
- Safety ON-OFF switch fitted with a dust cover and positive action push buttons plus a large (Red) self locking “Emergency Stop” hinge cover
- Precision spindle bearing for long life and high accuracy
- Table control via hand crank and gear rack is robust with high load capacity
- Long quill stroke with easy to adjust depth stop at the capstan handle
- Thick-walled, precision-ground column for extra rigidity
- Powerful long-life commercial drive motor provides high reliability even at continuous loads
- Ground set-up areas on table and base plate
- Solid rotating work table with diagonal clamping slots
- Full range of Spare Parts available in Australia!
Specifications
- Motor: 240V 3/4HP
- Number of Speeds: 16
- Spindle Speeds: 162-3000rpm
- Maximum Drilling Capacity: 16mm
- Spindle Taper: MT2
- Chuck: 16mm
- Maximum Spindle Stroke: 78mm
- Swing: 350mm
- Maximum Distance from Spindle to Table: 781mm
- Maximum Distance from Spindle to Base: 1219mm
- Diameter of Column: 73mm
- Diameter of Table: 290mm
- Size of Base: 450x265mm
- Overall Height: 1588mm
- Weight: 55kg
- Carton: 1370 x 460 x 230mm
Intended UseThis device is used for producing holes in hard substances. A selected drill (drilling) bit is held in a rotating spindle and is fed into a workpiece, which is usually clamped in a vice resting on the adjustable table. The drill bit may be gripped in a chuck with three jaws, or it may have a tapered shank that fits into a tapered hole in the spindle. This Drill Press offers varying the spindle speeds and is intended for use with drill bits only.
(0 reviews) -
Porta Powers & Panel RepairTQB BRANDS Porta Power Kit 10,000kg
The TradeQuip “Made for the Trade” 10,000kg Hydraulic Porta Power Kit is designed to be used for pushing, spreading, and pressing of vehicle body panels as well as various component parts and assemblies. The variety of attachments include a rubber head, flat base, wedge spreader, spreader toe and various extension tubes with a snap lock design for quick and easy assembly. The pump has an automatic overload system to help prevent damage to the pump ram and associated equipment. The flex head features a permanently moulded rubber pad, interlocked to prevent separation. The complete kit includes a variety of specially designed auto body, frame repair and construction components for lifting, pushing, bending and spreading. (Previous models include product code/s; 2005T, PP10T, PROPP10, RLBRK10)
Features
- Spring loaded ram return system, allowing controlled retraction of the ram
- Pump may be used in horizontal and vertical position
- Constructed of high-grade steel and built to exacting standards for quality and durability
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy cleanup
- Pump has an automatic overload system to help prevent damage to rams and equipment
- Easily adapts to hoses, rams, pumps, spreaders, and other accessories using common 1/4″ fittings
- Contained in sturdy Plastic Carry Case
Ram Attachments
- Extensions (5 different lengths) connect in different combinations to reach overall desired job distance.
- Male Connector connects the female end of the Ram to a Base.
- Flat Base is used on the stationary side to spread the force of the Ram for extra safety.
- 90° V Base offsets the Ram force when there is limited opportunity of a straight line between the stationary side and the damaged side, or to spread out force on curved surfaces.
- Serrated Saddle is fitted on the pushing end to prevent slipping.
- Rubber Head is used for popping dents out of sheet metal such as doors or body panels and to minimise damage to work surfaces.
- Wedge Head is for repair small dents and areas located in angles and tight spaces.
- Ram Toe and Plunger Toe are used together to allow spreading in areas that the Ram cannot fit into.
Note: The Ram Toe and Plunger Toe MUST be used together to prevent an off-centre load.
Specifications
- Working Capacity: 10,000kg
- Kit Contents: 14 Pieces containing Pump, Hose and Fittings
- Ram Length retracted: 322mm
- Ram Length fully extended: 452mm
- Extensions: 110, 265, 365, 520mm
- Adaptor Diameter: 33mm
- Hydraulic Hose Length: 1500mm
- Hydraulic Oil Capacity: 650ml
- Overall Carry Case Dimensions: 905(L) x 385(W) x 175(H) mm
- Nett Weight: 31kg
- Carton: 925 x 395 x 185mm
- Gross Weight: 32kg
Intended Use
For regular professional collision repair and medium duty applications where the convenience of hydraulic power can be utilised for spreading, clamping, pushing and lifting.
(0 reviews) -
Porta Powers & Panel RepairTQB BRANDS Porta Power Kit 20,000kg
Our 20,000kg “Borum Industrial” Porta-Power set provides extra capacity for the toughest assignments. Two-speed pump extends ram quickly saving time and money. Versatile attachments provide broad range of function. Automatic two speed pump speeds ram to load, then shifts power stroke. With this set, spread materials apart and pull heavy duty machinery and sections. Pull, bend, lift, push, straighten and spread metals with this industrial quality hydraulic kit! Kit contains a heavy-duty pump and multiple extensions and accessories to repair body panel dents, level machinery and more. The 10,000 PSI pump in this portable hydraulic kit exerts tremendous force for fixing, forcing and shaping metal.This is a heavy duty set makes all bull-work repairs easier.
This equipment is used by the industry professionals for pressing, spreading, lifting, straightening and clamping panel and paint workshops and collision repair centres. Components are manufactured to industry standards, eg. precision threaded for durability and extension tubes that feature a strong wall design for increased resistance to bending and deformation. All kits are supplied with industry standard high flow hydraulic couplings and dust caps. (Previous models include product code/s; 2062, 20TPP)
Powerful, Heavy-Duty Operation
This 20,000kg heavy-duty hydraulic body repair kit is the perfect choice for a wide variety of uses. The quality components and fittings make this unit perfect for those looking for quality and precision all day everyday!
Added Safety Overload Protection
Carelessness can cause injuries, but this unit gives you extra peace of mind. It’s fitted with a safety overload valve for extra protection. Even if you load the ram unit up with too much force, the safety overload kicks in to protect the internals.
Use It Day In And Day Out
This professional kit is designed for durability. A rugged high-grade steel construction is teamed with a lead-free paint finish that covers the entire surface to ensure long-lasting wear and help prevent rust. The paint is oil-, grease- and dirt-resistant for easy cleanup no matter how often you put this portable power kit to work.
Features
- Constructed of high-grade steel and built to exacting standards for quality and durability
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy cleanup
- High quality hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life
- Piston-ram is treated and polished
- Hydraulics are powered with a high quality oil, which offers better corrosion resistance and high/low temperature flexibility.
- Heavy walled extension tubes stand up in tough applications
- 2x metal storage cases
Accessories
- 700mm extension tube
- 510mm extension tube
- 255mm extension tube
- 125mm extension tube
- 3 each, 70mm connective tube & 60mm joint connector tube
- Base
- Ram toe
- Plunger toe
- Wedge toe
- V-base
- Wrench
Specifications
- Safe Working Capacity: 20,000kg
- Retracted Ram Length: 285mm
- Ram Stroke: 125mm
- Hydraulic Hose Length: 1470mm
- Weight: 62kg
- Carton 1 of 2: 810 x 300 x 185mm
- Carton 2 of 2: 820 x 405 x 115mm
Intended Use
For industrial medium-heavy duty applications where the convenience of hydraulic power can be utilised for spreading, clamping, pushing and lifting.
(0 reviews) -
Fans, Coolers, Heaters & Air ConTQB BRANDS Portable Industrial Spot Cooling Air Conditioner – 2.7KW
TradeQuip “Made for the Trade” Portable Industrial Air Conditioners are designed for economical spot cooling in workshops, service rooms, warehouses and offices especially where other electrical equipment creates a heat load. These TradeQuip Portable Industrial Air Conditioners are completely self-contained and housed within an insulated cabinet. The unit’s exterior is constructed of galvanised steel and protected with a tough powder-coated, polyester finish. All models are equipped standard with heavy-duty castors for easy portability. TradeQuip Portable Industrial Air Conditioners bring in air from an outside source to cool its condenser, cycling hot air to an outside source. This provides a fresh cool air room temperature with high efficiency. Just wheel it in, plug it in and it goes to work immediately, giving high cooling capacity to wherever and at whatever point you require it.
With its compact size, this TradeQuip “Made for the Trade” Portable Industrial Air Conditioning unit is perfectly suited to spot cool work areas, yet still delivers an impressive amount of cooling air output.
The 1031T is the smallest unit in size and capacity in the TradeQuip “Made for the Trade” series portable air conditioners. The 1031T has an extremely small foot print that is ideal for spot cooling people or equipment in a high ambient environment, like in a workshop or office space. The TradeQuip “Made for the Trade” Portable Air Conditioners offer a quick cooling solution with “plug and play” technology that tops the competition with its small size, strong air flow, and easy installation. These portable air conditioners achieve up to 10°C temperature differential across its coil. This means that 39°C input air will instantly produce 29°C. output air for spot cooling a work station the unit will effectively cool a person and/or workshop equipment within 2-5m of the unit instantly.
The 1031T runs on a standard 240V/10A circuit with automatic restart after a power failure. The unit comes with a 5-Litre self-contained condensation tank, that is manually emptied. Installation takes less than ten minutes for easy set up.
With the substantial ‘instant’ changes in the air temperature, a portable industrial air conditioner is perfect for cooling hard working people or spot cooling of rooms, workshops, factories, laundries, schools, agricultural sheds, and more.
Features
- Compact yet powerful
- Runs on 240V 10A circuit
- Wide operating range of 18º- 45ºC
- Single duct system for easy installation
- 5 Litre self-contained condensation tank for easy removal and emptying
- Capillary tube construction for simplicity
- Heavy duty compressor with automatic restart and short cycle protection
- Motors and compressors have overload protection
- Durable and long lasting steel construction
- Heavy duty locking castors and handles for easy manoeuvrability
Specifications
- Cooling Capacity: 2.7KW / 9200Btu
- Power Unit: 240V 50Hz 10amp plug
- Rated Power: 950W
- Rated Current: 4.2A
- Max. Air Flow: 400m3 per hour
- Coverage Area: 12-15m2
- Noise Level: 55dB(A)
- Operating Temperature: 18° – 45°C
- Suction Pressure: 2.5Mpa (Max.)
- Discharge Pressure: 4.5Mpa (Max.)
- Speed Control: 2-speed
- Cooling Pipe: 120mm Dia
- Exhaust Pipe: 160mm Dia
- Condensation Tank Capacity: 5 Litres
- Castor Wheels: 75mm Dia (2 with brakes)
- Ingress Protection: IP42 Rated
- Dimension: 855(H) x 430(W) x 405(D)
- Nett Weight: 42kg
- Carton: 965 x 515 x 484mm
- Gross Weight 47kg
Intended use:
This appliance is intended for air conditioning industrial or trade workshop/office environments. It is not suitable for any other purpose (such as drying clothes, cooling food, etc.)
This product is an Industrial Product and not suitable for household use.
(0 reviews) -
Fans, Coolers, Heaters & Air ConTQB BRANDS Portable Industrial Spot Cooling Air Conditioner 4.5kW
TradeQuip “Made for the Trade” Portable Industrial Air Conditioners are designed for economical spot cooling in workshops, service rooms, warehouses and offices especially where other electrical equipment creates a heat load. These TradeQuip Portable Industrial Air Conditioners are completely self-contained and housed within an insulated cabinet. The unit’s exterior is constructed of galvanised steel and protected with a tough powder-coated, polyester finish. All models are equipped standard with heavy-duty castors for easy portability. TradeQuip Portable Industrial Air Conditioners bring in air from an outside source to cool its condenser, cycling hot air to an outside source. This provides a fresh cool air room temperature with high efficiency. Just wheel it in, plug it in and it goes to work immediately, giving high cooling capacity to wherever and at whatever point you require it.
With its compact size, this TradeQuip “Made for the Trade” Portable Industrial Air Conditioning unit is perfectly suited to spot cool work areas, yet still delivers an impressive amount of cooling air output.
The 1032T is the medium unit in size and capacity in the TradeQuip “Made for the Trade” series of portable air conditioners. The 1032T has a small foot print that is ideal for spot cooling people or equipment in a high ambient environment, like in a workshop or office space. The TradeQuip “Made for the Trade” Portable Air Conditioners offer a quick cooling solution with “plug and play” technology that tops the competition with its small size, strong air flow, and easy installation. These portable air conditioners achieve up to 10°C temperature differential across its coil. This means that 39°C input air will instantly produce 29°C output air for spot cooling at a work station which will effectively cool a person and/or workshop equipment within 2-5m of the unit instantly.
The 1032T runs on a 240V/15A circuit with automatic restart after a power failure. The unit comes with a 5-Litre self-contained condensation tank, that is manually emptied. Installation takes less than ten minutes for easy set up.
With the substantial ‘instant’ changes in the air temperature, a portable industrial air conditioner is perfect for cooling hard working people or spot cooling of rooms, workshops, factories, laundries, schools, agricultural sheds, and more.
Features
- Compact yet powerful
- Runs on 240V 15A circuit
- Wide operating range of 18º- 45ºC
- Single duct system for easy installation
- 5 Litre self-contained condensation tank for easy removal and emptying
- Capillary tube construction for simplicity
- Heavy duty compressor with automatic restart and short cycle protection
- Motors and compressors have overload protection
- Durable and long lasting steel construction
- Heavy duty locking castors and handles for easy manoeuvrability
Specifications
- Cooling Capacity: 4.5KW / 15300Btu
- Power Unit: 240V 50Hz 15amp plug
- Rated Power: 2000W
- Rated Current: 9.0A
- Max. Air Flow: 800m3 per hour
- Coverage Area: 35-40m2
- Noise Level: 60dB(A)
- Operating Temperature: 18° – 45°C
- Suction Pressure: 2.5Mpa (Max.)
- Discharge Pressure: 4.5Mpa (Max.)
- Speed Control: 2-speed
- Cooling Pipe: 120mm Dia
- Exhaust Pipe: 200mm Dia
- Condensation Tank Capacity: 8 Litres
- Castor Wheels: 75mm Dia (2 with brakes)
- Ingress Protection: IP42 Rated
- Dimension: 1035(H) x 520(W) x 480(D)
- Nett Weight: 70kg
- Carton 1of2: 1110 x 610 x 570mm
- Carton 2of2: 370 x 350 x 260mm
- Gross Weight 78kg
Intended use:
This appliance is intended for air conditioning industrial or trade workshop/office environments. It is not suitable for any other purpose (such as drying clothes, cooling food, etc.)
This product is an Industrial Product and not suitable for household use.
(0 reviews) -
Fans, Coolers, Heaters & Air ConTQB BRANDS Portable Industrial Spot Cooling Air Conditioner 6.5kW
TradeQuip “Made for the Trade” Portable Industrial Air Conditioners are designed for economical spot cooling in workshops, service rooms, warehouses and offices especially where other electrical equipment creates a heat load. These TradeQuip Portable Industrial Air Conditioners are completely self-contained and housed within an insulated cabinet. The unit’s exterior is constructed of galvanised steel and protected with a tough powder-coated, polyester finish. All models are equipped standard with heavy-duty castors for easy portability. TradeQuip Portable Industrial Air Conditioners bring in air from an outside source to cool its condenser, cycling hot air to an outside source. This provides a fresh cool air room temperature with high efficiency. Just wheel it in, plug it in and it goes to work immediately, giving high cooling capacity to wherever and at whatever point you require it.
With its compact size, this TradeQuip “Made for the Trade” Portable Industrial Air Conditioning unit is perfectly suited to spot cool work areas, yet still delivers an impressive amount of cooling air output.
The 1033T is the large unit in size and capacity in the TradeQuip “Made for the Trade” series portable air conditioners. The 1033T has a foot print that is ideal for spot cooling people or equipment in a high ambient environment, like in a workshop or office space. The TradeQuip “Made for the Trade” Portable Air Conditioners offer a quick cooling solution with “plug and play” technology that tops the competition with its small size, strong air flow, and easy installation. These portable air conditioners achieve up to 10°C temperature differential across its coil. This means that 39°C input air will instantly produce 29°C output air for spot cooling at a work station which will effectively cool a person and/or workshop equipment within 2-5m of the unit instantly.
The 1033T runs on a 240V/15A circuit with automatic restart after a power failure. The unit comes with a 5-Litre self-contained condensation tank, that is manually emptied. Installation takes less than ten minutes for easy set up.
With the substantial ‘instant’ changes in the air temperature, a portable industrial air conditioner is perfect for cooling hard working people or spot cooling of rooms, workshops, factories, laundries, schools, agricultural sheds, and more.
Features
- Compact yet powerful
- Runs on 240V 15A circuit
- Wide operating range of 18º- 45ºC
- Single duct system for easy installation
- 5 Litre self-contained condensation tank for easy removal and emptying
- Capillary tube construction for simplicity
- Heavy duty compressor with automatic restart and short cycle protection
- Motors and compressors have overload protection
- Durable and long lasting steel construction
- Heavy duty locking castors and handles for easy manoeuvrability
Specifications
- Cooling Capacity: 6.5KW / 22200Btu
- Power Unit: 240V 50Hz 15amp plug
- Rated Power: 3000W
- Rated Current: 13.5A
- Max. Air Flow: 1200m3 per hour
- Coverage Area: 55-60m2
- Noise Level:65dB(A)
- Operating Temperature: 18° – 45°C
- Suction Pressure: 2.5Mpa (Max.)
- Discharge Pressure: 4.5Mpa (Max.)
- Speed Control: 2-speed
- Cooling Pipe: 120mm Dia
- Exhaust Pipe: 250mm Dia
- Condensation Tank Capacity: 13 Litres
- Castor Wheels: 75mm Dia (2 with brakes)
- Ingress Protection: IP42 Rated
- Dimension: 1245(H) x 640(W) x 560(D)
- Nett Weight: 100kg
- Carton 1of2: 1730 x 740 x 610mm
- Gross Weight 155kg
Intended use:
This appliance is intended for air conditioning industrial or trade workshop/office environments. It is not suitable for any other purpose (such as drying clothes, cooling food, etc.)
This product is an Industrial Product and not suitable for household use.
(0 reviews)