Industrial Equipment & Supplies
Showing 10045–10080 of 11241 results
-
Log BooksRoller Door Safety Check Logbook
DL SIZE. (210mm x 100mm)
DAILY PRE START & AFTER START SAFETY CHECKS.
12 MONTHS RECORDING, 7 DAYS A WEEK.
FAULT REPORTING & SERVICE DETAILS.
SUPPLIED IN A RESEALABLE PLASTIC POCKET
(0 reviews) -
BurrsSABER Burrs Express Cut Ball
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Cylindrical
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Cylindrical Ball Nose
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Burrs
SABER Burrs Express Cut Cylindrical with End Cut
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Flame
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Included Angle
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Oval
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Pointed Cone
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Sets
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Tree Pointed Nose
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Tree Radius Nose
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Non-Ferrous Cut Ball
- Non-Ferrous Cut Burrs are designed for rapid stock removal with minimum chip loading resulting in longer life and reduced clogging.
- Non-Ferrous Cut Burrs are for use on non-ferrous and non-metallic materials such as aluminium, brass, copper, bronze, coarse plastic, hard rubber, reinforced plastic and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Non-Ferrous Cut Cylindrical
- Non-Ferrous Cut Burrs are designed for rapid stock removal with minimum chip loading resulting in longer life and reduced clogging.
- Non-Ferrous Cut Burrs are for use on non-ferrous and non-metallic materials such as aluminium, brass, copper, bronze, coarse plastic, hard rubber, reinforced plastic and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Non-Ferrous Cut Cylindrical with Ball Nose
- Non-Ferrous Cut Burrs are designed for rapid stock removal with minimum chip loading resulting in longer life and reduced clogging.
- Non-Ferrous Cut Burrs are for use on non-ferrous and non-metallic materials such as aluminium, brass, copper, bronze, coarse plastic, hard rubber, reinforced plastic and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Non-Ferrous Cut Included Angle
- Non-Ferrous Cut Burrs are designed for rapid stock removal with minimum chip loading resulting in longer life and reduced clogging.
- Non-Ferrous Cut Burrs are for use on non-ferrous and non-metallic materials such as aluminium, brass, copper, bronze, coarse plastic, hard rubber, reinforced plastic and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Non-Ferrous Cut Tree Radius Nose
- Non-Ferrous Cut Burrs are designed for rapid stock removal with minimum chip loading resulting in longer life and reduced clogging.
- Non-Ferrous Cut Burrs are for use on non-ferrous and non-metallic materials such as aluminium, brass, copper, bronze, coarse plastic, hard rubber, reinforced plastic and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsSABER Diamond Hole Saw
- Diamond core drills and hole saws require the use of proper lubrication, correct drill speed and proper pressure.
- Drilling methods and techniques vary significantly depending upon the material being drilled.
- To achive optimum cutting performance and maximum core drill life use a slow to very slow drill speed, low drill pressure, and plenty of water for lubrication.
- Variable speed drills work best since the correct speed can be selected.
- Diamond core drills only drill out a portion of the resulting hole so they drill much faster than conventional blunt nose drills.
- Core drills can be used on most non-ferrous hard materials such as glass, ceramic, porcelain, fibreglass, slate, marble, granite and other natural and manufactured stone materials.
- The life of any type of diamond drill depends upon the hardness, abrasiveness and thickness of the material being drilled and the specific drilling techniques used.
- Using diamond core drills in hard materials is not difficult, however drilling the hole takes time.
- You should consider that they aren’t “drilling” a hole – they are “grinding” a hole.
- SPEEDS IN RPM: Fibreglass – 1200, Glass, Ceramic and China – 800, Limestone and Marble – 600, Ceramic Tile – 600, Porcelain – 500, Granite and Comp. Stone – 400.
- DO NOT USE HAMMER ACTION.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
SetsSABER Drill & Tap Sets
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsSABER Hole Saw Kits
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsSABER Quick Change Mandrel
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
SetsSABER Tap & Die Sets
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Load CoversSAFEGUARD Accessories
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Load CoversSAFEGUARD Cargo Nets
Convenience and durability go hand in hand with Safeguard Cargo Nets.
Made from UV-stabilized webbing and mesh that won’t tangle, these nets are effortless! With multiple anchor points, a load rating of 1000kg, 6 straps and the option to add more straps to increase the load rating. These nets are perfect for utes, trailers, trucks, boats and to name a few.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Load CoversSAFEGUARD Containment Nets
The Safeguard Containment Nets, designed for light and medium-duty tray-back utes, trucks, trailers, and boats, safely secure items. To achieve a 250kg load rating, four (x4) SSH-100 Safeguard cargo straps need to be added.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Load CoversSAFEGUARD Multipurpose Nets
Perfect for many vehicle types. The Multipurpose Cargo Nets come in two kinds – a net type, and a weatherproof type. Loads are assured to be covered and secured as these have a load rating of 500kg.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Load CoversSAFEGUARD Toolbox Nets
Specifically designed for utes or trucks that carry toolboxes.
Safeguard Toolbox Nets have a 1000kg load rating which keeps your load secure and in place.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Load CoversSAFEGUARD Waterproof Nets
Available in 5 sizes. The Safeguard Weatherproof Nets are perfect for those who require weather protection on their vehicles. These nets are guaranteed to keep your load dry and safe.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Log Books
Safety / Rescue Equipment Logbook
A4 SIZE.
300 PAGES (150 sheets x 2 sides).
10 ITEM DIVIDER TABS.
100 ‘UNUSED’ TAGS. (green)
100 ‘USED’ TAGS. (red)
PACK OF PLASTIC TIES.
SUPPLIED IN A ROBUST REFILLABLE 4 RING BINDER.
(0 reviews) -
Log Books
Scaffold Safety Check Logbook
A4 SIZE.
DAILY PRE START & AFTER START CHECKS.
12 MONTHS RECORDING, 7 DAYS PER WEEK.
FAULT REPORTING.
SERVICING DETAILS.
PREFERRED SERVICE PROVIDERS.
SUPPLIED IN A RESEALABLE PLASTIC POCKET.
(0 reviews) -
Safety GlassesSCOPE Air Blade Safety Glasses
- The AIR BLADE is an ultra-lightweight polycarbonate frame with exceptional eye coverage via a high contour lens design with crystal clear optics.
- It features wide lateral pressure-free temples that are ergonomically optimised for comfort, fit and enhanced side coverage for added protection.
- One piece optically correct lens
- Ultra light-weight
- All polycarbonate frame
- All polycarbonate frame
- Wide field of view
- Weight / 23 grams
- AS/NZS 1337.1 : 2010
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Safety GlassesSCOPE Air Flex Safety Glasses
- The AIR FLEX packs next-level design features with sports-inspired styling and exceptional comfort.
- The ultra-lightweight frame and extremely flexible slim temple design automatically diffuse and eliminate pressure points by self-adjusting to any head size and shape.
- Equipped with a built-in co-moulded soft brow bar and flexible nose pads for added comfort, the large base curve lens guarantees your vision will stay shielded without compromising on style.
- 9.5 base lens curve provides maximum eye coverage
- Ultra light-weight co-moulded frame
- Soft a flexible co-moulded nose pads
- Built in co-moulded soft brow bar
- Ergonomically optimised co-moulded temples self adjust to various head contours to ensure a pressure free fit
- Sports inspired styling
- Weight / 20 grams
- AS/NZS 1337.1: 2010 Medium Impact
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Eye ProtectionSCOPE Atomic Crystal
- The ATOMIC is a comfortable, lightweight and low-profile safety goggle that offers a 180-degree field of view.
- Able to easily fit under hard hats, it features a soft PVC frame with open indirect top and bottom vents and a once piece anti-fog coated polycarbonate lens.
- It also has a 25mm wide adjustable elastic strap to ensure a secure fit and is certified for splash and impact resistance.
- Low profile design
- Soft and flexible PVC frame
- Moulded one piece spherical lens
- Indirect top/bottom ventilation
- Fully adjustable, pivoted elastic headband
- Impact and liquid splash approved
- Wide field of view
- Weight / 91 grams
- AS/NZS 1337.1 : 2010
(0 reviews) -
Safety GlassesSCOPE Beast Safety Glasses
- The BEAST is a cutting-edge, modern design safety eyewear that offers distortion-free optics and a rugged, lightweight frame that is both durable and comfortable.
- It features a unique air-filled rubber nose bridge and co-moulded flexible rubber temples that offer an incomparable, pressure-free fit. Made from high impact resistant polycarbonate, the sporty wrap design also includes an attachable retention strap providing extra stability and support for active
- With a select range of UV and impact-resistant lenses to choose from, they offer total outdoor protection with outstanding performance.
- High wrap dual lens design
- Unique Air Flex T-bar style rubber nose bridge
- Includes adjustable elastic tension strap with every pair
- Weight / 38 grams
- AS/NZS 1337.1: 2010 Medium Impact
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Safety GlassesSCOPE Bionix Safety Glasses
- The BIONIX has an innovative, modern and distinctive design that was created with optimal protection in mind.
- The ultra-wraparound one-piece polycarbonate lens offers superior coverage with brilliant optical clarity and an unobstructed wide field of view.
- With flexible co-injected thermoplastic rubber temples and an inbuilt nose bridge, this high-grade gear provides excellent wearability and guarantees optimal eye defence at all times.
- Titanium-High Performance AF/AS Lens Coating
- Ultra wraparound design
- Co-injected PC/TPR temples
- Dielectric design contains no metal parts
- Wide field of view
- Weight / 28 grams
- AS/NZS 1337.1: 2010 Medium Impact
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Safety GlassesSCOPE Biosphere Safety Glasses
- BIOSPHERE is a frameless design that features a large 10 base lens, providing ultimate eye coverage for extra protection, and is made with metal-free lightweight materials.
- The flexible soft PVC nose bridge provides slip-resistance with a comfortable fit, and flexible co-moulded rubber temples offer a pressure-free and secure fit.
- Large 10 base curve lens
- Ultra light-weight frame
- Non slip adjustable PVC nose bridge
- Co-moulded flexible and pressure free temples
- Dielectric frame contains no metal parts
- Weight / 28 grams
- AS/NZS 1337.1 : 2010
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page
