Industrial Equipment & Supplies
Showing 8281–8316 of 13395 results
-
M12MILWAUKEE M12™ Spot Polisher/Detail Sander
MILWAUKEE Tool continues to expand its 12V REDLITHIUM™ system with the introduction of the new M12™ Spot Polisher/Detail Sander. Optimised to provide the fastest and most precise detail work, the new tool performs the work of two tools in one by easily switching between polishing and sanding modes. As the most compact cordless polisher on the market, the M12™ Spot Polisher/Detail Sander is the perfect complement to a full-size polisher for a faster finish. Featuring Dual Mode Control and a variable speed trigger, the M12™ Spot Polisher/Detail Sander delivers increased user control, regardless of the application. A tool-free accessory change allows the user to quickly change between polishing and sanding accessories.
(0 reviews) -
Outdoor PowerMILWAUKEE M12™ Spot Polisher/Detail Sander Kit
MILWAUKEE Tool continues to expand its 12V REDLITHIUM-ION system with the introduction of the new M12™ Spot Polisher/Detail Sander Kit. Optimised to provide the fastest and most precise detail work, the new tool performs the work of two tools in one by easily switching between polishing and sanding modes. As the most compact cordless polisher on the market, the M12™ Spot Polisher/Detail Sander is the perfect complement to a full size polisher for a faster finish. Featuring Dual Mode Control and a variable speed trigger, the M12™ Spot Polisher/Detail Sander delivers increased user control, regardless of the application. A tool-free accessory change allows the user to quickly change between polishing and sanding accessories.
(0 reviews) -
LightingMILWAUKEE M12™ Stand Area Light (Tool Only)
MORE PORTABLE. ALL-DAY OPERATION – The M12 Stand Area Light has the lightest weight in its class and a 45% smaller footprint than M18 Stand Lights that allows it to be easily carried and setup in the most confined spaces. The M12SAL-0 extends up to 172cm to provide 1,400 Lumens of TRUEVIEW High Definition Output on high mode and 700 Lumens on low mode. When powered by an M12 REDLITHIUM-ION 6.0Ah battery pack, it runs up to 10 hours on a single charge. After deployment, the M12SAL-0 is supported by impact-resistant, reinforced legs that form a compact base with a low center of gravity to help survive any job site.
(0 reviews) -
Power ToolsMILWAUKEE M12™ Stick Transfer Pump (Tool Only)
The M12™ Stick Transfer Pump delivers maximum filtration for uninterrupted pumping in catch basins, water meter boxes, trenches, sump pump pits, and more. Featuring a 91 cm submersible aluminium barrel, this transfer pump provides the extension needed to reach water at the bottom of trenches and hard to reach areas. Equipped with HydroPass filter technology, the 360° filter maximises flow in heavy debris, minimising downtime caused by clogging. Powered by the M12™ battery platform, this water transfer pump eliminates repetitive manual pumping and improves control, requiring only one hand to pump, freeing the other to control the outflow. With a 4.6 metre max head height and an outlet compatible with a standard 19 mm garden hose, this pump delivers the power to push water farther – out of pits and basins, over walls, and to the ideal deposit location. Compatible with all of our M12™ REDLITHIUM Batteries this pump keeps you productive, effortlessly pumping up to 34 Litres per minute and 1,040 Litres when using a M12™ REDLITHIIUM™-ION 4.0 Ah battery pack
(0 reviews) -
M12MILWAUKEE M12™ Sub-Compact Brushless 1/4″ Hex Impact Driver (Tool Only)
Our M12™ Sub-Compact Brushless ¼ ” Hex Impact Driver delivers a compact and lightweight cordless impact driver. Measuring at only 109mm in length and 51mm in width, allowing for the maximum access in tight spaces and with a skin weight of only 0.6kg. This impact driver delivers portability and manoeuvrability for hard-to-reach fasteners. The brushless motor technology provides faster driving speeds with 124Nm of torque and up to 3,000 RPM to maximise productivity. An internal metal gearcase delivers robust strength and durability. MILWAUKEE® REDLINK™ Intelligence communicates with the M12™ REDLITHIUM™ batteries (sold separately) to provide optimal performance for the tools. The M12™ Sub-Compact Brushless ¼ ” Hex Impact Driver is part of the M12™ system and is fully compatible with over 150+ solutions.
(0 reviews) -
Drill DriversMILWAUKEE M12™ Sub-Compact Brushless 10mm Drill/Driver (Tool Only)
Our M12™Sub-Compact Brushless 10mm Drill/Driver features a compact and light weight drill/driver, providing maximum access in tight spaces. The compact drill is only 137mm in length with a skin weight of only 0.7kg, allowing for minimal fatigue and excellent control, especially while working overhead or in tight spaces. The brushless motor delivers optimal tool performance at 39.5Nm of torque and up to 1,550 RPM, tackling a wide range of drilling and fastening applications. The drill features premium components, including a 10mm metal chuck, providing best-in-class durability. MILWAUKEE® REDLINK™ Intelligence communicates with the M12™ REDLITHIUM™ batteries (sold separately) to deliver optimal performance for the tools. The M12™ Sub-Compact Brushless Drill/Driver is part of the M12™ system, fully compatible with over 150+ solutions.
(0 reviews) -
M12 Power PacksMILWAUKEE M12™ Sub-Compact Brushless 2 Piece Power Pack 2D
What’s Included
M12™ Sub-Compact Brushless 10mm Drill/Driver (Tool Only)
M12™ Sub-Compact Brushless 1/4″ Hex Impact Driver (Tool Only)
(2) M12™ REDLITHIUM™ 3.0Ah Compact Battery
M12™ Lithium-ion Battery Charger(0 reviews) -
MILWAUKEEMILWAUKEE M12™ Tool Holster
Designed to fit M12 drilling and fastening tools, the M12 Tool Holster increases productivity and provides the user with a quick and durable means of tool retrieval and protection on the job site. Constructed of heavy duty nylon material, the 233520 features an easy snap-on strap and on-board bit storage for added user convenience.
(0 reviews) -
Drain CleaningMILWAUKEE M12™ TRAPSNAKE™ 1.2m (4′) Urinal Auger (Tool Only)
M12™ TRAPSNAKE™ 1.2 m (4′) Urinal Auger is the service plumbers and facility maintenance crews ideal solution for unclogging urinals and floor traps. Powered by the M12™ TRAPSNAKE™ Driver, the powered unit is optimised for the challenges of porcelain fixtures. This unit delivers the power and speed to work through tough clogs in tight traps with optimised electronics that protect the fixture from the auger and allow users to feel when the tool is engaged with a blockage. The M12™ TRAPSNAKE™ 1.2 m (4′) Urinal Auger has innovative features including a fixed rubber boot for maximum porcelain protection, an integrated locking mechanism which holds the cable in place for easy telescoping extension, and replaceable cables to maximise the longevity of the tool. As a part of the TRAPSNAKE™ System, users can interchange the M12™ TRAPSNAKE™ Driver with the auger handle or use with other auger attachments for maximum versatility and capabilities in a range of plumbing and facilities maintenance applications.
(0 reviews) -
Drain CleaningMILWAUKEE M12™ TRAPSNAKE™ 1.8m (6′) Toilet Auger (Tool Only)
M12™ TRAPSNAKE™ 1.8 m (6′) Toilet Auger is the service plumbers and facility maintenance crews ideal solution for unclogging urinals and floor traps. Powered by the M12™ TRAPSNAKE™ Driver, the powered unit is optimised for the challenges of porcelain fixtures. This unit delivers the power and speed to work through tough clogs in tight traps with optimised electronics that protect the fixture from the auger and allow users to feel when the tool is engaged with a blockage. The M12™ TRAPSNAKE™ 1.8 m (6′) Toilet Auger has innovative features including a fixed rubber boot for maximum porcelain protection, an integrated locking mechanism which holds the cable in place for easy telescoping extension, and replaceable cables to maximise the longevity of the tool. As a part of the TRAPSNAKE™ System, users can interchange the M12™ TRAPSNAKE™ Driver with the auger handle or use with other auger attachments for maximum versatility and capabilities in a range of plumbing and facilities maintenance applications.
(0 reviews) -
ChargersMILWAUKEE M12™ USB-C Travel Charger
The M12™ USB-C Travel Charger provides M12™ battery users a 2-in-1 battery and personal device charging experience whether on or off the jobsite. The Travel Charger pairs with any M12™ battery, providing 15W of power to charge personal devices, including phones, tablets, headphones, or other small electronics. This next generation Travel Charger provides faster personal device and M12™ battery charging than the previous model M12TC, with it’s bi-directional USB-C port increasing productivity throughout the day. It can also be used to power all M12™ Heated Gear for increased functionality. Included with the Travel Charger is a 350 mm USB-C braided cable and USB-C wall adaptor.
(0 reviews) -
M18MILWAUKEE M18 FUEL™ (125mm) Deep Cut Dual-Trigger Band Saw w/ ONE-KEY™ (Tool Only)
The M18 FUEL™ 125mm Dual-Trigger Deep Cut Bandsaw w/ ONE-KEY™ provides enhanced safety for onsite cutting with Dual-Trigger two handed activation, an integrated tether point and blade covers. The Deep Cut Dual-Trigger Band Saw provides user-demanded performance with the ability to deliver fast cuts, taking up to 42 seconds to cut Schedule 40 black iron pipe using an M18™ REDLITHIUM™ 5.0Ah Battery, eliminating multiple trips to the charger onsite. The M18FBS125DO0 is equipped with features to enhance the control of users cut while maximising the cutting experience through-out the jobsite. The POWERSTATE™ brushless motor delivers maximum power with up to 167.6 SMPM to increase productivity when removing material. With a Variable Speed Mode Select, and a feathering trigger to allow for control over the speed of cut on thicker metals. Developed with a tool-free adjustable shoe, to help guide the user through a straighter cut, and an LED work light to illuminate their application. Equipped with ONE-KEY™, this bandsaw wirelessly connects to a smartphone to track and manage the tool, providing users with visibility to where tools are across their network of jobs.
(0 reviews) -
M18MILWAUKEE M18 FUEL™ 1″ D-Handle Extended Anvil High Torque Impact Wrench with ONE-KEY™ (Tool Only)
The M18 FUEL™ 1″ D-Handle Extended Anvil High Torque Impact Wrench w/ ONE-KEY™ is the world’s first cordless 1” D-Handle High Torque Impact Wrench. The POWERSTATE™ Brushless Motor delivers up to 2,711Nm of nut-busting torque and 2,576Nm of fastening torque, making this the world’s most powerful cordless impact wrench, enabling you to complete the most demanding applications. With the runtime for up to 120 lug nut removals and installations on a single HIGH OUTPUT™ HD 12.0Ah battery, this portable impact wrench provides unmatched performance. Lug Nut Mode, which can be enabled through the ONE-KEY™ app, prevents the over-torque of lug nuts by automatically shutting off the tool, providing more control. The REDLINK PLUS™ Intelligence ensures you achieve maximum performance and protects the High Torque Impact Wrench against overloads, over-heating, and over-discharge. M18™ REDLITHIUM™ Battery Packs are compatible with all M18™ tools, providing this high torque cordless impact wrench with more work per charge and more work over the life of the pack. A patented battery isolation system manages high frequency vibrations, enabling battery movement that prevents damage and ensures a constant connection between the battery and tool when in use. The 4-Mode DRIVE CONTROL™ provides you with greater control over the output speed and power of the MILWAUKEE® High Torque Impact Wrench. The ONE-KEY™ Technology allows you to customize, track, and manage the impact wrench with the ability to set a repeatable torque output for maximum control.
(0 reviews) -
M18MILWAUKEE M18 FUEL™ 1″ D-Handle Short Anvil High Torque Impact Wrench with ONE-KEY™ (Tool Only)
The M18 FUEL™ 1″ D-Handle Short Anvil High Torque Impact Wrench with ONE-KEY™ is powered by a POWERSTATE™ Brushless Motor that delivers up to 2,711 Nm of nut-busting torque and 2,576 Nm of fastening torque, enabling you to complete the most demanding applications. With the runtime to install up to 200, 25mm bolts on a single M18™ REDLITHIUM™ HIGH OUTPUT™ 12.0AH Battery (M18HB12), the M18ONEFHIWF1DS0 provides maximum performance and cordless convenience, eliminating the need for compressors, generators, cords, and hoses. With no compressor or hose, you have greater productivity and portability to complete applications not accessible with a pneumatic unit. This reduces the cost of ownership by lowering energy costs and eliminating routine maintenance on compressors and generators. The REDLINK PLUS™ Intelligence ensures you achieve maximum performance and protects the High Torque Impact Wrench against overloads, over-heating, and over-discharge. A patented battery isolation system manages high frequency vibrations, enabling battery movement that prevents damage and ensures a constant connection between the battery and tool when in use. The 4-Mode DRIVE CONTROL (further customisable with ONE-KEY™) provides you with greater control over the output speed and power of the MILWAUKEE® High Torque Impact Wrench. The ONE-KEY™ Technology allows you to customise, track, and manage the impact wrench with the ability to set a repeatable torque output for maximum control.
(0 reviews) -
Power ToolsMILWAUKEE M18 FUEL™ 1/2″ Compact Impact Wrench with Friction Ring (Tool Only)
The M18 FUEL™ 1/2″ Compact Impact Wrench with Friction Ring delivers maximum access in tight spaces, up to 339 Nm of nut-busting torque, and maximum workspace visibility. This battery-powered impact wrench measures only 124.5 mm in length, with a POWERSTATE™ Brushless Motor to provide the power to remove stubborn fasteners, even in confined spaces. The MILWAUKEE® 1/2″ Compact Impact Wrench with Friction Ring has tri-LEDs that surround the anvil to deliver the user brighter light with fewer shadows. 4-Mode DRIVE CONTROL offers enhanced precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, Auto Shut-Off Mode applies no more than 27 Nm of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Mode, where the tool delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK™ PLUS Intelligence electronics make these controls possible while ensuring maximum performance, protecting the tool against overloads, over-heating, and over-discharge. The M18™ REDLITHIUM™-ION battery pack (not included) fits all M18™ tools, delivering more work per charge and more work over the life of the pack.
(0 reviews) -
Power ToolsMILWAUKEE M18 FUEL™ 1/2″ Compact Impact Wrench with Pin Detent (Tool Only)
The M18 FUEL™ 1/2″ Compact Impact Wrench with Pin Detent delivers maximum access in tight spaces, up to 339 Nm of nut-busting torque, and maximum workspace visibility. This battery-powered impact wrench measures only 124.5 mm in length, with a POWERSTATE™ Brushless Motor to provide the power to remove stubborn fasteners, even in confined spaces. The MILWAUKEE® 1/2″ Compact Impact Wrench with Pin Detent has tri-LEDs that surround the anvil to deliver the user brighter light with fewer shadows. 4-Mode DRIVE CONTROL offers enhanced precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, Auto Shut-Off Mode applies no more than 27 Nm of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Mode, where the tool delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK™ PLUS Intelligence electronics make these controls possible while ensuring maximum performance, protecting the tool against overloads, over-heating, and over-discharge. The M18™ REDLITHIUM™-ION battery pack (not included) fits all M18™ tools, delivering more work per charge and more work over the life of the pack.
(0 reviews) -
Power ToolsMILWAUKEE M18 FUEL™ 1/2″ High Torque Impact Wrench with Friction Ring (Tool Only)
The M18 FUEL High Torque ½” Impact Wrench with Friction Ring provides a full corded replacement delivering 1354Nm of fastening torque and 1897Nm of nut-busting torque. The industry’s most compact cordless High Torque Impact wrench at 213mm in length, this tool allows for more access in tight spaces. 4-Mode DRIVE CONTROL with Bolt Removal mode gives users the most control over their fasteners. Bolt Removal mode gives the user more control when removing fasteners by slowing to 750rpm once the fastener has been busted loose. This tool includes a ½” Friction Ring anvil which provides quick changing sockets. A premium rubber overmold material gives you ultimate comfort during prolonged use while lasting longer against corrosive materials.
(0 reviews) -
M18MILWAUKEE M18 FUEL™ 1/2″ High Torque Impact Wrench with Pin Detent (Tool Only)
The M18 FUEL™ ½” High Torque Impact Wrench w/ Pin Detent provides maximum power density and greater access in tight spaces, maximising productivity through faster bolt removal speeds. The POWERSTATE™ Brushless Motor delivers up to 1,220Nm of Fastening Torque and 1,490Nm of Nut-Busting Torque when paired with the M18™ REDLITHIUM™ FORGE™ 6.0Ah Battery, while the compact size at 185.4mm in length gives users greater access in tight spaces. The new battery isolation system provides a secure battery connection and controls vibration transmitted to the pack. Tri-LEDs surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF™ control applies no more than 68Nm of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Mode that delivers users full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops.
(0 reviews) -
M18MILWAUKEE M18 FUEL™ 1/2″ Mid-Torque Impact Wrench with Friction Ring (Tool Only)
The M18 FUEL™ 1/2″ Mid-Torque Impact Wrench with Friction Ring delivers access in tight spaces, up to 881 Nm of nut-busting torque, and maximum power to weight ratio. This battery-powered impact wrench weighs only 1.58 kg, making it extremely versatile, capable of performing a wide variety of applications. A POWERSTATE™ Brushless Motor provides the power needed to quickly perform many tasks, such as removing large bolts or lug nuts. The MILWAUKEE® 1/2″ Mid-Torque Impact Wrench with Friction Ring is only 152 mm in length, providing users access to stubborn fasteners where larger impact wrenches cannot fit without needing to disassemble components to reach bolts. Tri-LEDs that surround the anvil to deliver the user brighter light with fewer shadows. 4-Mode DRIVE CONTROL offers enhanced precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, Auto Shut-Off Mode applies no more than 48 Nm of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Mode, where the tool delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK™ PLUS Intelligence electronics make these controls possible while ensuring maximum performance, protecting the tool against overloads, over-heating, and over-discharge. The M18™ REDLITHIUM™ battery pack (not included) fits all M18™ tools, delivering more work per charge and more work over the life of the pack.
(0 reviews) -
Power ToolsMILWAUKEE M18 FUEL™ 1/2″ Mid-Torque Impact Wrench with Pin Detent (Tool Only)
The M18 FUEL™ 1/2″ Mid-Torque Impact Wrench with Pin Detent delivers access in tight spaces, up to 881 Nm of nut-busting torque, and maximum power to weight ratio. This battery-powered impact wrench weighs only 1.58 kg, makin it extremely versatile, capable of performing a wide variety of applications. A POWERSTATE™ Brushless Motor provides the power needed to quickly perform many tasks, such as removing large bolts or lug nuts. The MILWAUKEE® 1/2″ Mid-Torque Impact Wrench with Pin Detent is only 152 mm in length, providing users access to stubborn fateners where larger impact wrenches cannot fit without needing to disassemble components to reach bolts. Tri-LEDs that surround the anvil to deliver the user brighter light with fewer shadows. 4-Mode DRIVE CONTROL offers enhanced precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, Auto Shut-Off Mode applies no more than 48 Nm of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Mode, where the tool delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK™ PLUS Intelligence electronics make these controls possible while ensuring maximum performance, protecting the tool against overloads, over-heating, and over-discharge. The M18™ REDLITHIUM™-ION battery pack (not included) fits all M18™ tools, delivering more work per charge and more work over the life of the pack.
(0 reviews) -
RoutersMILWAUKEE M18 FUEL™ 1/2″ Router (Tool Only)
Designed for the professional carpenter and remodeler, the MILWAUKEE® M18 FUEL™ 1/2″ Router delivers best-in-class cordless performance with 2.25 peak horsepower, control and comfort in application, and 68 linear metres of runtime per charge. The POWERSTATE™ Brushless Motor delivers less bog down under load for clean, precise cuts and increased productivity. REDLINK PLUS™ intelligence ensures maximum performance and protection from overload, overheating, and over-discharge. The ergonomic BODYGRIP® and overmould pommels provide control and comfort in application to enhance precision and reduce fatigue. The M18™ REDLITHIUM™ HIGH OUTPUT 6.0Ah Battery (not included) provides 68 linear metres per charge of 15.88mm roundover in pine and the power to tackle the toughest applications found on the jobsite. The variable speed dial has an adjustment range from 12,000 to 25,000 RPM to optimise cuts across a wide range of bits and materials. The router is equipped with a micro-adjust knob and macro-adjust button with over 50.8mm (2″) of travel to provide users with fast and accurate depth adjustments. The cordless router features dual-LED lights to illuminate the work surface, a spindle lock for quick one-wrench bit changes, and a modular console design for compatibility with the Milwaukee® 1/2″ Router Plunge Base (RBA1) (not included).
(0 reviews) -
RoutersMILWAUKEE M18 FUEL™ 1/2″ Router Kit
What’s Included
M18 FUEL™ 1/2″ Router (Tool Only)
1/2″ Router Plunge Base
(2) M18™ REDLITHIUM™ 5.0Ah Battery
M12™ & M18™ Rapid Charger(0 reviews) -
Power ToolsMILWAUKEE M18 FUEL™ 1/4″ Braking Die Grinder with Slide Switch (Tool Only)
The M18 FUEL™ 1/4″ Braking Die Grinder with Slide Switch delivers corded performance allowing users to remove up to 305mm of weld bead per charge on a M18B5. Equipped with RAPIDSTOP™ technology that provides braking in under 2 seconds, the M18 FUEL™ 1/4″ Braking Die Grinder with Slide Switch enhances safety while maximising productivity. The POWERSTATE™ brushless motor delivers 27,000 RPM and maximum power to allow users to maintain grinding power while in the tight spaces. The cordless braking die grinder has up to 55mm accessory compatibility for surface prep applications and material removal while featuring REDLINK PLUS™ Intelligence, an advanced system of cordless power tool electronics, for maximum performance and tool life.
(0 reviews) -
Power ToolsMILWAUKEE M18 FUEL™ 1/4″ Hex Impact Driver (Tool Only)
The M18 FUEL™ 1/4″ Hex Impact Driver features the POWERSTATE™ Brushless motor which delivers maximum power for a full range of capabilities to complete the widest variety of applications. Increase productivity on the jobsite with fast driving speed without sacrificing power or control. REDLINK PLUS™ intelligence delivers Ultimate Trigger Control by providing smooth acceleration for small fasteners to prevent stripping of screws or damaging of materials. Featuring 4-mode drive control provides users with greater control over output speed and power. Self-Tapping Screw Mode is designed to reduce walking when starting self-tapping screws as well as reduce overdriving, breaking, and stripping out screws. The new impact driver also features Tri-LED lighting, illuminating the area of work while eliminating shadows.
(0 reviews) -
Rivet ToolsMILWAUKEE M18 FUEL™ 1/4″ Lockbolt Tool w/ ONE-KEY™ (Tool Only)
The M18 FUEL™ 1/4” Lockbolt Tool w/ ONE-KEY™ eliminates the need for hoses and compressors by providing users with a cordless solution for installing Lockbolts in vibration-resistant applications. Designed for heavy-duty tasks, the M18ONEFLT delivers up to 1,200 Lockbolts per charge when using a single M18™ REDLITHIUM™ 5.0Ah Battery. The POWERSTATE Brushless Motor delivers 2,041kg of pulling force, enabling the installation of 4.8mm (3/16″), 6.4mm (1/4″), and 9.5mm* (3/8″) Lockbolts (*when using the M18ONEFLT-HT Adapter). Integrated ONE-KEY™ allows for tracking and management of tools to protect investments and boost productivity. With single-trigger installation capability, the M18ONEFLT is ideal for professionals in truck & trailer assembly, caravan assembly, utility scale solar panel installations and other heavy-duty applications.
*HUCK, HUCKTAINER, C6L, C120L MAGNA-GRIP, and BOBTAIL are all trademarks of Howmet Aerospace Inc. or its subsidiaries
(0 reviews) -
M18MILWAUKEE M18 FUEL™ 1/4″ ONE-KEY™ Braking Die Grinder with Deadman Paddle Switch (Tool Only)
The M18 FUEL™ 1/4″ ONE-KEY™ Braking Die Grinder with Deadman Paddle Switch delivers user demanded runtime with the ability to deburr up to 35 pipes on a M18B5. Milwaukee’s cordless Die Grinder offers variable speeds from 8,000 – 20,000 RPM to provide users the precision and power needed in key applications. Equipped with RAPIDSTOP™ technology that provides braking in under 2 seconds, the M18 FUEL™ 1/4″ ONE-KEY™ Braking Die Grinder with Deadman Paddle Switch gives users enhanced safety, while maximising productivity. Compatible with ONE-KEY™, the die grinder wirelessly connects to a smart phone to track and manage the tool, providing users with visibility to where tools are across their network of jobs. The POWERSTATE™ brushless motor delivers up to 20,000 RPM to allow users to maintain grinding power while in tight spaces. The cordless tool delivers up to 55mm cutting and 76mm sanding accessory compatibility for material removal and surface prep applications, and an LED worklight to enhance visibility. Milwaukee’s die grinder features REDLINK PLUS™ Intelligence, an advanced system of cordless power tool electronics for maximum performance and long tool life.
(0 reviews) -
Power ToolsMILWAUKEE M18 FUEL™ 1/4″ Rivet Tool with ONE-KEY™ (Tool Only)
The M18 FUEL™ 1/4″ Rivet Tool with ONE-KEY™ delivers fast cordless riveting. It eliminates the need for hoses and compressors while delivering maximum life. This rivet gun significantly increases productivity and portability, and ensures a higher level of safety. The premium steel alloy 3-jaw design delivers more work between jaw changes. While lightweight, the M18 FUEL™ 1/4″ Rivet Tool with ONE-KEY™ has been designed to withstand harsh shop or assembly plant environments. Manufactured with an all-metal gearcase, impact strength plastics, and protective over-mold the tool is designed for maximum durability. The POWERSTATE™ Brushless Motor delivers 2,041 kg of pulling force for high strength blind rivets in all materials. This rivet tool pulls up to 900 3/16” (4.76 mm) aluminium or 500 1/4” (6.35 mm) aluminium blind rivets on one charge with an M18™ REDLITHIUM™-ION 2.0Ah battery (not included). REDLINK™ PLUS Intelligence ensures maximum performance and protects the tool and battery against overloads, over-heating, and over-discharge. With ONE-KEY™ compatibility, the tool allows the user to track and manage the tool within their inventory.
(0 reviews) -
AccessoriesMILWAUKEE M18 FUEL™ 1/4″ Rivet Tool with ONE-KEY™ 152mm (6”) Extension
The 6″ (152mm) Extension for the M18 FUEL™ 1/4″ Rivet Tool with ONE-KEY™ allows the user to install rivets in hard-to-reach applications. The all-metal extension has a low profile with a diameter of only 34mm (1.34″), equal to the clearance of the standard outer jaw housing on the tool. The 152 mm (6”) Extension is compatible with the MILWAUKEE® M18 FUEL™ 1/4″ Rivet Tool with ONE-KEY™ (M18FPRT, sold separately)
(0 reviews) -
AccessoriesMILWAUKEE M18 FUEL™ 1/4″ Rivet Tool with ONE-KEY™ Jaw Set
The M18 FUEL™ 1/4″ Rivet Tool with ONE-KEY™ Jaw Set boasts a premium steel alloy 3-jaw design, increasing jaw durability and life whilst decreasing the number of jaw replacements. The jaws can be easily swapped in and out of the tool and install 3/16″ (4.76 mm), 7/32″ (5.56 mm), 1/4″ (6.35 mm) and 9/32″ (7.14 mm) rivets. Compatible with the MILWAUKEE® M18 FUEL™ 1/4″ Rivet Tool with ONE-KEY™ (M18FPRT, sold separately).
(0 reviews)
