Industrial Equipment & Supplies
Showing 7921–7956 of 9042 results
-
PlatformRICHMOND Wide 6 Wheel Stock Trolley Twin Platform Single Handle
Richmond’s range of 6 wheel stock platform trolleys are perfect for transporting stock around a busy store, produce market, factory or warehouse. These galvanised platform trolleys feature an innovative 6 wheel rocking design that keeps the centre wheel grounded at all times allowing for full 360 degree movement around tight spaces.
Each trolley is made from tough, galvanised steel and is fitted with 200mm rigid (fixed centre) castors and 125mm swivel outer castors. This range has a load capacity of up to 500kg and includes many versatile options including single or twin platform trolleys with single or double handles.
Trolley Weight:Â 37kg
Platform Size:Â 1140mm x 565mm
Platform Height:Â 260mm and 650mm
Handle Height:Â 950mm
Outer Wheel Size:Â 125mm rebound rubber
Centre Wheel Size:Â 200mm rubber tyred nylon centred
Safe working load:Â 450kg
(0 reviews) -
PlatformRICHMOND Wide 6 Wheel Stock Trolley Twin Platform Twin Handle
Richmond’s range of 6 wheel stock platform trolleys are perfect for transporting stock around a busy store, produce market, factory or warehouse. These galvanised platform trolleys feature an innovative 6 wheel rocking design that keeps the centre wheel grounded at all times allowing for full 360 degree movement around tight spaces.
Each trolley is made from tough, galvanised steel and is fitted with 200mm rigid (fixed centre) castors and 125mm swivel outer castors. This range has a load capacity of up to 500kg and includes many versatile options including single or twin platform trolleys with single or double handles.
Trolley Weight:Â 38kg
Platform Size:Â 1140mm x 565mm
Platform Height:Â 260mm and 650mm
Handle Height:Â 950mm
Outer Wheel Size:Â 125mm rebound rubber
Centre Wheel Size:Â 200mm rubber tyred nylon centred
Safe working load:Â 500kg
(0 reviews) -
Log BooksRide On Mower Safety Check Logbook
A5 SIZE.
DAILY PRE START & AFTER START CHECKS.
12 MONTHS RECORDING, 7 DAYS PER WEEK.
FAULT REPORTING.
SERVICING DETAILS.
PREFERRED SERVICE PROVIDERS.
SUPPLIED IN A RESEALABLE PLASTIC POCKET.
(0 reviews) -
Log Books
Rigid Tray Truck Safety Check Logbook
A5 SIZE.
DAILY PRE START & AFTER START CHECKS.
12 MONTHS RECORDING, 7 DAYS PER WEEK.
FAULT REPORTING.
SERVICING DETAILS.
PREFERRED SERVICE PROVIDERS.
SUPPLIED IN A RESEALABLE PLASTIC POCKET.
(0 reviews) -
Log Books
Roller Compaction Safety Check Logbook
A5 SIZE.
DAILY PRE START & AFTER START CHECKS.
12 MONTHS RECORDING, 7 DAYS PER WEEK.
FAULT REPORTING.
SERVICING DETAILS.
PREFERRED SERVICE PROVIDERS.
SUPPLIED IN A RESEALABLE PLASTIC POCKET.
(0 reviews) -
Log Books
Roller Door Safety Check Logbook
DL SIZE. (210mm x 100mm)
DAILY PRE START & AFTER START SAFETY CHECKS.
12 MONTHS RECORDING, 7 DAYS A WEEK.
FAULT REPORTING & SERVICE DETAILS.
SUPPLIED IN A RESEALABLE PLASTIC POCKET
(0 reviews) -
BurrsSABER Burrs Express Cut Ball
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Cylindrical
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Cylindrical Ball Nose
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Burrs
SABER Burrs Express Cut Cylindrical with End Cut
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Flame
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Included Angle
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Oval
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Pointed Cone
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Sets
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Tree Pointed Nose
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Tree Radius Nose
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Non-Ferrous Cut Ball
- Non-Ferrous Cut Burrs are designed for rapid stock removal with minimum chip loading resulting in longer life and reduced clogging.
- Non-Ferrous Cut Burrs are for use on non-ferrous and non-metallic materials such as aluminium, brass, copper, bronze, coarse plastic, hard rubber, reinforced plastic and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Non-Ferrous Cut Cylindrical
- Non-Ferrous Cut Burrs are designed for rapid stock removal with minimum chip loading resulting in longer life and reduced clogging.
- Non-Ferrous Cut Burrs are for use on non-ferrous and non-metallic materials such as aluminium, brass, copper, bronze, coarse plastic, hard rubber, reinforced plastic and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Non-Ferrous Cut Cylindrical with Ball Nose
- Non-Ferrous Cut Burrs are designed for rapid stock removal with minimum chip loading resulting in longer life and reduced clogging.
- Non-Ferrous Cut Burrs are for use on non-ferrous and non-metallic materials such as aluminium, brass, copper, bronze, coarse plastic, hard rubber, reinforced plastic and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Non-Ferrous Cut Included Angle
- Non-Ferrous Cut Burrs are designed for rapid stock removal with minimum chip loading resulting in longer life and reduced clogging.
- Non-Ferrous Cut Burrs are for use on non-ferrous and non-metallic materials such as aluminium, brass, copper, bronze, coarse plastic, hard rubber, reinforced plastic and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Non-Ferrous Cut Tree Radius Nose
- Non-Ferrous Cut Burrs are designed for rapid stock removal with minimum chip loading resulting in longer life and reduced clogging.
- Non-Ferrous Cut Burrs are for use on non-ferrous and non-metallic materials such as aluminium, brass, copper, bronze, coarse plastic, hard rubber, reinforced plastic and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsSABER Diamond Hole Saw
- Diamond core drills and hole saws require the use of proper lubrication, correct drill speed and proper pressure.
- Drilling methods and techniques vary significantly depending upon the material being drilled.
- To achive optimum cutting performance and maximum core drill life use a slow to very slow drill speed, low drill pressure, and plenty of water for lubrication.
- Variable speed drills work best since the correct speed can be selected.
- Diamond core drills only drill out a portion of the resulting hole so they drill much faster than conventional blunt nose drills.
- Core drills can be used on most non-ferrous hard materials such as glass, ceramic, porcelain, fibreglass, slate, marble, granite and other natural and manufactured stone materials.
- The life of any type of diamond drill depends upon the hardness, abrasiveness and thickness of the material being drilled and the specific drilling techniques used.
- Using diamond core drills in hard materials is not difficult, however drilling the hole takes time.
- You should consider that they aren’t “drilling” a hole – they are “grinding” a hole.
- SPEEDS IN RPM: Fibreglass – 1200, Glass, Ceramic and China – 800, Limestone and Marble – 600, Ceramic Tile – 600, Porcelain – 500, Granite and Comp. Stone – 400.
- DO NOT USE HAMMER ACTION.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
SetsSABER Drill & Tap Sets
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsSABER Hole Saw Kits
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsSABER Quick Change Mandrel
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
SetsSABER Tap & Die Sets
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Load CoversSAFEGUARD Accessories
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Load CoversSAFEGUARD Cargo Nets
Convenience and durability go hand in hand with Safeguard Cargo Nets.
Made from UV-stabilized webbing and mesh that won’t tangle, these nets are effortless! With multiple anchor points, a load rating of 1000kg, 6 straps and the option to add more straps to increase the load rating. These nets are perfect for utes, trailers, trucks, boats and to name a few.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Load CoversSAFEGUARD Containment Nets
The Safeguard Containment Nets, designed for light and medium-duty tray-back utes, trucks, trailers, and boats, safely secure items. To achieve a 250kg load rating, four (x4) SSH-100 Safeguard cargo straps need to be added.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Load CoversSAFEGUARD Multipurpose Nets
Perfect for many vehicle types. The Multipurpose Cargo Nets come in two kinds – a net type, and a weatherproof type. Loads are assured to be covered and secured as these have a load rating of 500kg.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Load CoversSAFEGUARD Toolbox Nets
Specifically designed for utes or trucks that carry toolboxes.
Safeguard Toolbox Nets have a 1000kg load rating which keeps your load secure and in place.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Load CoversSAFEGUARD Waterproof Nets
Available in 5 sizes. The Safeguard Weatherproof Nets are perfect for those who require weather protection on their vehicles. These nets are guaranteed to keep your load dry and safe.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Log Books
Safety / Rescue Equipment Logbook
A4 SIZE.
300 PAGES (150 sheets x 2 sides).
10 ITEM DIVIDER TABS.
100 ‘UNUSED’ TAGS. (green)
100 ‘USED’ TAGS. (red)
PACK OF PLASTIC TIES.
SUPPLIED IN A ROBUST REFILLABLE 4 RING BINDER.
(0 reviews) -
Log Books
Scaffold Safety Check Logbook
A4 SIZE.
DAILY PRE START & AFTER START CHECKS.
12 MONTHS RECORDING, 7 DAYS PER WEEK.
FAULT REPORTING.
SERVICING DETAILS.
PREFERRED SERVICE PROVIDERS.
SUPPLIED IN A RESEALABLE PLASTIC POCKET.
(0 reviews) -
Safety GlassesSCOPE Air Blade Safety Glasses
- The AIR BLADE is an ultra-lightweight polycarbonate frame with exceptional eye coverage via a high contour lens design with crystal clear optics.
- It features wide lateral pressure-free temples that are ergonomically optimised for comfort, fit and enhanced side coverage for added protection.
- One piece optically correct lens
- Ultra light-weight
- All polycarbonate frame
- All polycarbonate frame
- Wide field of view
- Weight / 23 grams
- AS/NZS 1337.1 : 2010
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page
