Industrial Equipment & Supplies
Showing 757–792 of 10188 results
-
Bit SetsBORDO Screwdriver IMPACT Insert Bits
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Bit SetsBORDO Screwdriver IMPACT Power Bits Double Ended
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Bit SetsBORDO Screwdriver IMPACT Power Bits Set
- 6 Pce Impact Power Bit Set
- Designed and manufactured for optimum performance in modern impact drivers.
- Uniquely engineered torsion zone with multi-stage hardening and tempering to dissipate damaging peak loads.
(0 reviews) -
Bit SetsBORDO Screwdriver IMPACT Power Bits Single Ended
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Bit SetsBORDO Screwdriver Security Power Bits
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Bit SetsBORDO Screwdriver Standard Insert Bits
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Bit SetsBORDO Screwdriver Standard Insert Security Bits
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Bit SetsBORDO Screwdriver Standard Power Bits Double Ended
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Bit SetsBORDO Screwdriver Standard Power Bits Single Ended
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Bit SetsBORDO Screwgun Bits
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
MasonryBORDO SDS Max 1320mm
- Bordo SDS Max masonry bits provide high performance drilling in hard masonry materials.
- SDS Max – Suits all Rotary Hammers fitted with an SDS Max chuck.
- Suitable for use in Concrete, High MPA Concrete, Hard Aggregate, Masonry, Hard Stone and Brick.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Masonry
BORDO SDS Max 320mm
- Bordo SDS Max masonry bits provide high performance drilling in hard masonry materials.
- SDS Max – Suits all Rotary Hammers fitted with an SDS Max chuck.
- Suitable for use in Concrete, High MPA Concrete, Hard Aggregate, Masonry, Hard Stone and Brick.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Masonry
BORDO SDS Max 340mm
- Bordo SDS Max masonry bits provide high performance drilling in hard masonry materials.
- SDS Max – Suits all Rotary Hammers fitted with an SDS Max chuck.
- Suitable for use in Concrete, High MPA Concrete, Hard Aggregate, Masonry, Hard Stone and Brick.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Masonry
BORDO SDS Max 520mm
- Bordo SDS Max masonry bits provide high performance drilling in hard masonry materials.
- SDS Max – Suits all Rotary Hammers fitted with an SDS Max chuck.
- Suitable for use in Concrete, High MPA Concrete, Hard Aggregate, Masonry, Hard Stone and Brick.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Masonry
BORDO SDS Max 540mm
- Bordo SDS Max masonry bits provide high performance drilling in hard masonry materials.
- SDS Max – Suits all Rotary Hammers fitted with an SDS Max chuck.
- Suitable for use in Concrete, High MPA Concrete, Hard Aggregate, Masonry, Hard Stone and Brick.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Masonry
BORDO SDS Max 920mm
- Bordo SDS Max masonry bits provide high performance drilling in hard masonry materials.
- SDS Max – Suits all Rotary Hammers fitted with an SDS Max chuck.
- Suitable for use in Concrete, High MPA Concrete, Hard Aggregate, Masonry, Hard Stone and Brick.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Masonry
BORDO SDS Max 940mm
- Bordo SDS Max masonry bits provide high performance drilling in hard masonry materials.
- SDS Max – Suits all Rotary Hammers fitted with an SDS Max chuck.
- Suitable for use in Concrete, High MPA Concrete, Hard Aggregate, Masonry, Hard Stone and Brick.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
MasonryBORDO SDS Max Chisels
- SDS Max – Suits all Rotary Hammers fitted with an SDS Max chuck.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
MasonryBORDO SDS Max DELTABIT 305mm
- The Bordo range of Deltabit SDS Plus and SDS Max solid tungsten carbide head masonry drill bits offer outstanding performance in a wide variety of drilling applications.
- Deltabits offer specific advantages over standard SDS masonry bits.
- Three edge cutter provides high durability and improved drilling speed.
- Tungsten carbide head is permanently bonded to the shank through the use of a unique fusion welding technology, rather than brazing.
- Eliminates rifling – drilling holes close to perfect roundness.
- Extremely round holes result in improved fastener performance by increasing pull out loads.
- More accurate hole starting without bit walk.
- Limited circumferential wear.
- Drills through reinforcing mesh and reinforcing bar.
- Minimised bit binding against reinforcing bar – increasing operator safety.
- Easily drills through all typical steel decking plate including Bondek®.
- Reduced vibration minimising operator fatigue.
- Extremely hard wearing for long tool life.
- Triple fluted for improved dust extraction.
- Asymmetrical five cutter head on a select range of sizes in SDS Max.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Masonry
BORDO SDS Max DELTABIT 340mm
- The Bordo range of Deltabit SDS Plus and SDS Max solid tungsten carbide head masonry drill bits offer outstanding performance in a wide variety of drilling applications.
- Deltabits offer specific advantages over standard SDS masonry bits.
- Three edge cutter provides high durability and improved drilling speed.
- Tungsten carbide head is permanently bonded to the shank through the use of a unique fusion welding technology, rather than brazing.
- Eliminates rifling – drilling holes close to perfect roundness.
- Extremely round holes result in improved fastener performance by increasing pull out loads.
- More accurate hole starting without bit walk.
- Limited circumferential wear.
- Drills through reinforcing mesh and reinforcing bar.
- Minimised bit binding against reinforcing bar – increasing operator safety.
- Easily drills through all typical steel decking plate including Bondek®.
- Reduced vibration minimising operator fatigue.
- Extremely hard wearing for long tool life.
- Triple fluted for improved dust extraction.
- Asymmetrical five cutter head on a select range of sizes in SDS Max.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Masonry
BORDO SDS Max DELTABIT 380mm
- The Bordo range of Deltabit SDS Plus and SDS Max solid tungsten carbide head masonry drill bits offer outstanding performance in a wide variety of drilling applications.
- Deltabits offer specific advantages over standard SDS masonry bits.
- Three edge cutter provides high durability and improved drilling speed.
- Tungsten carbide head is permanently bonded to the shank through the use of a unique fusion welding technology, rather than brazing.
- Eliminates rifling – drilling holes close to perfect roundness.
- Extremely round holes result in improved fastener performance by increasing pull out loads.
- More accurate hole starting without bit walk.
- Limited circumferential wear.
- Drills through reinforcing mesh and reinforcing bar.
- Minimised bit binding against reinforcing bar – increasing operator safety.
- Easily drills through all typical steel decking plate including Bondek®.
- Reduced vibration minimising operator fatigue.
- Extremely hard wearing for long tool life.
- Triple fluted for improved dust extraction.
- Asymmetrical five cutter head on a select range of sizes in SDS Max.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Masonry
BORDO SDS Max DELTABIT 520mm
- The Bordo range of Deltabit SDS Plus and SDS Max solid tungsten carbide head masonry drill bits offer outstanding performance in a wide variety of drilling applications.
- Deltabits offer specific advantages over standard SDS masonry bits.
- Three edge cutter provides high durability and improved drilling speed.
- Tungsten carbide head is permanently bonded to the shank through the use of a unique fusion welding technology, rather than brazing.
- Eliminates rifling – drilling holes close to perfect roundness.
- Extremely round holes result in improved fastener performance by increasing pull out loads.
- More accurate hole starting without bit walk.
- Limited circumferential wear.
- Drills through reinforcing mesh and reinforcing bar.
- Minimised bit binding against reinforcing bar – increasing operator safety.
- Easily drills through all typical steel decking plate including Bondek®.
- Reduced vibration minimising operator fatigue.
- Extremely hard wearing for long tool life.
- Triple fluted for improved dust extraction.
- Asymmetrical five cutter head on a select range of sizes in SDS Max.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Masonry
BORDO SDS Max DELTABIT 540mm
- The Bordo range of Deltabit SDS Plus and SDS Max solid tungsten carbide head masonry drill bits offer outstanding performance in a wide variety of drilling applications.
- Deltabits offer specific advantages over standard SDS masonry bits.
- Three edge cutter provides high durability and improved drilling speed.
- Tungsten carbide head is permanently bonded to the shank through the use of a unique fusion welding technology, rather than brazing.
- Eliminates rifling – drilling holes close to perfect roundness.
- Extremely round holes result in improved fastener performance by increasing pull out loads.
- More accurate hole starting without bit walk.
- Limited circumferential wear.
- Drills through reinforcing mesh and reinforcing bar.
- Minimised bit binding against reinforcing bar – increasing operator safety.
- Easily drills through all typical steel decking plate including Bondek®.
- Reduced vibration minimising operator fatigue.
- Extremely hard wearing for long tool life.
- Triple fluted for improved dust extraction.
- Asymmetrical five cutter head on a select range of sizes in SDS Max.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
MasonryBORDO SDS Max Extractor Adaptor
- SDS Max Vacuum Masonry Drill Dust Extractor Adaptor
- Bordo SDS Vacuum Masonry Drill Bits reduce airborne silica dust by extracting it at the point of drilling.
- Holes at the bit tip and the hollow shaft design allow dust extraction through the bit while drilling drilling the hole.
- The drilling of “clean” holes greatly increases productivity for chemical anchor preparation by removing the need for the “blow-brush-blow” method used with standard masonry drills.
- The universal vacuum adapter fits most common dust extractor attachments.
(0 reviews) -
MasonryBORDO SDS Max to SDS Plus Adapator
- SDS Max to SDS Plus Adaptor
- SDS Max (male) to SDS Plus (female) Masonry Drill Adaptor
- Used to adapt SDS Plus drills so they can be used in a hammer drill fitted with a SDS Max chuck.
- SDS Max (male) to SDS Plus (female) Masonry Drill Adaptor.
(0 reviews) -
MasonryBORDO SDS Max Vacuum
- Bordo SDS Vacuum Masonry Drill Bits reduce airborne silica dust by extracting it at the point of drilling.
- Holes at the bit tip and the hollow shaft design allow dust extraction through the bit while drilling drilling the hole.
- The drilling of “clean” holes greatly increases productivity for chemical anchor preparation by removing the need for the “blow-brush-blow” method used with standard masonry drills.
- The universal vacuum adapter fits most common dust extractor attachments.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
MasonryBORDO SDS Max X-BIT 1320mm
- Bordo X-Bits drill faster and last longer than standard two edged rotary hammer bits.
- Hard stone and high MPA concrete quickly cause standard masonry bits to dull and break, but not the X-Bit.
- The single piece* 4 edge tungsten carbide head offers extreme toughness and wear resistance drilling with exceptionally low vibration.
- The precision cutting facets create dimensionally accurate holes for improved anchor performance.
- Patented chamfering on the tip ensures fracture resistance when drilling into concrete reinforcing.
- Hole positioning is simplified with the self-centering drill tip reducing bit wander.
- Four flute geometry ensures efficient dust removal while retaining a solid engineered heavy duty core the length of the drill to prevent bending and breakage.
- Suitable for use in: Concrete, High MPA Concrete, Hard Aggregate, Masonry, Hard Stone and Brick.
- * X-Bits with a diameter greater than 12mm utilise a conventional three piece tungsten carbide arrangement.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Masonry
BORDO SDS Max X-BIT 340mm
- Bordo X-Bits drill faster and last longer than standard two edged rotary hammer bits.
- Hard stone and high MPA concrete quickly cause standard masonry bits to dull and break, but not the X-Bit.
- The single piece* 4 edge tungsten carbide head offers extreme toughness and wear resistance drilling with exceptionally low vibration.
- The precision cutting facets create dimensionally accurate holes for improved anchor performance.
- Patented chamfering on the tip ensures fracture resistance when drilling into concrete reinforcing.
- Hole positioning is simplified with the self-centering drill tip reducing bit wander.
- Four flute geometry ensures efficient dust removal while retaining a solid engineered heavy duty core the length of the drill to prevent bending and breakage.
- Suitable for use in: Concrete, High MPA Concrete, Hard Aggregate, Masonry, Hard Stone and Brick.
- * X-Bits with a diameter greater than 12mm utilise a conventional three piece tungsten carbide arrangement.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Masonry
BORDO SDS Max X-BIT 370mm
- Bordo X-Bits drill faster and last longer than standard two edged rotary hammer bits.
- Hard stone and high MPA concrete quickly cause standard masonry bits to dull and break, but not the X-Bit.
- The single piece* 4 edge tungsten carbide head offers extreme toughness and wear resistance drilling with exceptionally low vibration.
- The precision cutting facets create dimensionally accurate holes for improved anchor performance.
- Patented chamfering on the tip ensures fracture resistance when drilling into concrete reinforcing.
- Hole positioning is simplified with the self-centering drill tip reducing bit wander.
- Four flute geometry ensures efficient dust removal while retaining a solid engineered heavy duty core the length of the drill to prevent bending and breakage.
- Suitable for use in: Concrete, High MPA Concrete, Hard Aggregate, Masonry, Hard Stone and Brick.
- * X-Bits with a diameter greater than 12mm utilise a conventional three piece tungsten carbide arrangement.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Masonry
BORDO SDS Max X-BIT 540mm
- Bordo X-Bits drill faster and last longer than standard two edged rotary hammer bits.
- Hard stone and high MPA concrete quickly cause standard masonry bits to dull and break, but not the X-Bit.
- The single piece* 4 edge tungsten carbide head offers extreme toughness and wear resistance drilling with exceptionally low vibration.
- The precision cutting facets create dimensionally accurate holes for improved anchor performance.
- Patented chamfering on the tip ensures fracture resistance when drilling into concrete reinforcing.
- Hole positioning is simplified with the self-centering drill tip reducing bit wander.
- Four flute geometry ensures efficient dust removal while retaining a solid engineered heavy duty core the length of the drill to prevent bending and breakage.
- Suitable for use in: Concrete, High MPA Concrete, Hard Aggregate, Masonry, Hard Stone and Brick.
- * X-Bits with a diameter greater than 12mm utilise a conventional three piece tungsten carbide arrangement.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Masonry
BORDO SDS Max X-BIT 570mm
- Bordo X-Bits drill faster and last longer than standard two edged rotary hammer bits.
- Hard stone and high MPA concrete quickly cause standard masonry bits to dull and break, but not the X-Bit.
- The single piece* 4 edge tungsten carbide head offers extreme toughness and wear resistance drilling with exceptionally low vibration.
- The precision cutting facets create dimensionally accurate holes for improved anchor performance.
- Patented chamfering on the tip ensures fracture resistance when drilling into concrete reinforcing.
- Hole positioning is simplified with the self-centering drill tip reducing bit wander.
- Four flute geometry ensures efficient dust removal while retaining a solid engineered heavy duty core the length of the drill to prevent bending and breakage.
- Suitable for use in: Concrete, High MPA Concrete, Hard Aggregate, Masonry, Hard Stone and Brick.
- * X-Bits with a diameter greater than 12mm utilise a conventional three piece tungsten carbide arrangement.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Masonry
BORDO SDS Max X-BIT 920mm
- Bordo X-Bits drill faster and last longer than standard two edged rotary hammer bits.
- Hard stone and high MPA concrete quickly cause standard masonry bits to dull and break, but not the X-Bit.
- The single piece* 4 edge tungsten carbide head offers extreme toughness and wear resistance drilling with exceptionally low vibration.
- The precision cutting facets create dimensionally accurate holes for improved anchor performance.
- Patented chamfering on the tip ensures fracture resistance when drilling into concrete reinforcing.
- Hole positioning is simplified with the self-centering drill tip reducing bit wander.
- Four flute geometry ensures efficient dust removal while retaining a solid engineered heavy duty core the length of the drill to prevent bending and breakage.
- Suitable for use in: Concrete, High MPA Concrete, Hard Aggregate, Masonry, Hard Stone and Brick.
- * X-Bits with a diameter greater than 12mm utilise a conventional three piece tungsten carbide arrangement.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
MasonryBORDO SDS Plus 1000mm
- Bordo SDS Plus masonry bits provide high performance drilling in hard masonry materials.
- Suitable for use in all rotary hammer drills fitted with an SDS Plus chuck.
- Suitable for use in Concrete, High MPA Concrete, Hard Aggregate, Masonry, Hard Stone and Brick.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Masonry
BORDO SDS Plus 110mm
- Bordo SDS Plus masonry bits provide high performance drilling in hard masonry materials.
- Suitable for use in all rotary hammer drills fitted with an SDS Plus chuck.
- Suitable for use in Concrete, High MPA Concrete, Hard Aggregate, Masonry, Hard Stone and Brick.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Masonry
BORDO SDS Plus 160mm
- Bordo SDS Plus masonry bits provide high performance drilling in hard masonry materials.
- Suitable for use in all rotary hammer drills fitted with an SDS Plus chuck.
- Suitable for use in Concrete, High MPA Concrete, Hard Aggregate, Masonry, Hard Stone and Brick.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Masonry
BORDO SDS Plus 210mm
- Bordo SDS Plus masonry bits provide high performance drilling in hard masonry materials.
- Suitable for use in all rotary hammer drills fitted with an SDS Plus chuck.
- Suitable for use in Concrete, High MPA Concrete, Hard Aggregate, Masonry, Hard Stone and Brick.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page
