Industrial Equipment & Supplies
Showing 577–612 of 6808 results
-
Drill Bits & SetsBORDO Glass and Tile Drill (Spear Point Drill)
- Tungsten Carbide Glass and Tile Drill.
- These drills are designed for drilling glass, tile and other hard, brittle materials.
- The tungsten carbide spear point is extremely hard and features uniquely sharpened edges for fast penetration with a reduced need for end thrust.
- These drill bits cut clean round holes without chipping or material breakage, and work best with a lubricant such as water to extend bit life.
- When drilling multiple holes in ceramic tiles, or when drilling vitrified porcelain, we recommend using either Bordo ceramic tile drills, the Bordo mist drill product range or Brilliant Diamond core drills.
- Tungsten Carbide (commonly referred to as Carbide) is a chemical compound containing equal parts of tungsten and carbon atoms.
- Carbide is three times stiffer than steel and is much denser than either steel or titanium.
- Carbide has a very high abrasion resistance and can also withstand higher temperatures than standard HSS.
- Carbide tools are often used for machining hard materials such as ceramics and stainless steel, as well as in situations where other tools would wear away, such as high volume production runs.
- Because carbide tools maintain a sharp cutting edge better than other tools, they generally produce a better finish on parts, and their temperature resistance allows faster machining.
- Whilst tungsten carbide is extremely hard it is also brittle so it is important to avoid bit “chattering” as this is the most common cause of tool failure.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO Green Band HSS-Co TiN Carbon Steel Drilling
- Bordo Metric Green Band HSS-Co TiN Coated Twist Drills for Carbon Steel.
- DIN338
- 130° split point with two helical flutes with 33 degrees of helix angle.
- The machinability of different carbon steels is as varied as their properties. Soft-tough construction steels place a unique set of demands on the tools.
- The Green Band Series of drills and taps have been developed specifically for this range of steels.
- For machining materials with Hardness < 250 HB : Tensile Strength <900 N/mm2.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Taps & DiesBORDO Green Band TiN Coated Carbon Steel Tapping Spiral Flute
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Taps & DiesBORDO Green Band TiN Coated Carbon Steel Tapping Spiral Point
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO Groo-V RAM Tip Drills Fractional
- Specialised serrated carbide ram tip drill.
- Percussion or rotary-only.
- The Groo-V® Tip bit makes holes in almost all materials!
- Engineered for drilling hard materials, these specialised Ram Tip Bits have a serrated carbide tip, which penetrates faster – up to 50% faster than standard masonry bits!
- A drill press or supported drill motor is recommended for drilling hard metal.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & Sets
BORDO Groo-V RAM Tip Drills Metric
- Specialised serrated carbide ram tip drill.
- Percussion or rotary-only.
- The Groo-V® Tip bit makes holes in almost all materials!
- Engineered for drilling hard materials, these specialised Ram Tip Bits have a serrated carbide tip, which penetrates faster – up to 50% faster than standard masonry bits!
- A drill press or supported drill motor is recommended for drilling hard metal.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hacksaws & BladesBORDO Hacksaw Frames
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
HandBORDO Hand Fractional
- Bordo Hand Reamers are made from premium HSS.
- 10° left hand spiral for effective swarf removal.
- Right hand cutting.
- H7 hole limit (tolerance).
- Hand reamers are used to manually finish a hole for a neat finish, and are typically held in a tapping wrench.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand
BORDO Hand Metric
- Bordo Hand Reamers are made from premium HSS.
- 10° left hand spiral for effective swarf removal.
- Right hand cutting.
- H7 hole limit (tolerance).
- Hand reamers are used to manually finish a hole for a neat finish, and are typically held in a tapping wrench.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand Taper PinBORDO Hand Taper Pin Fractional
- Bordo Taper Pin Reamers are made from premium HSS.
- They are straight fluted.
- 1:50 inclination (taper) for metric sizes and 1:48 inclination (taper) for fractional sizes
- As the name suggests, Bordo Taper Pin Reamers are used for securing tapered pins, which are used to secure steel plates and blocks together.
- They are typically held in a tapping or similar wrench.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand Taper Pin
BORDO Hand Taper Pin Metric
- Bordo Taper Pin Reamers are made from premium HSS.
- They are straight fluted.
- 1:50 inclination (taper) for metric sizes and 1:48 inclination (taper) for fractional sizes
- As the name suggests, Bordo Taper Pin Reamers are used for securing tapered pins, which are used to secure steel plates and blocks together.
- They are typically held in a tapping or similar wrench.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BrushwareBORDO Hex Shank Cup Brush NylonGrit
- NylonGrit
- Bordo NylonGrit brushes are constructed using grit-impregnated nylon fibres that are self-replenishing as the brush ages.
- NylonGrit brushware maintains its shape and will not rust.
- It will not shed bristles under normal conditions.
- Abrasive grit is impregnated throughout each bristle.
- Safer to use, will not puncture skin.
- Ideal for Removing paints, corrosion, weld scale, surface rust and burns from metals.
- For preparing plastic, fibreglass, and rubber surfaces for adhesives.
- Preparing metal surfaces for primers and paint.
- For cleaning unfinished tile, stone, cement, and brick mortar.
- Removing old paint and finishes from wood.
- Cleaning and sanding wood turnings, railings, banisters, trim and moulding.
- Rounding and blending edges, cutouts and joints.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BrushwareBORDO Hex Shank Cup Brush Steel Wire
- Steel Wire
- Bordo hex shank crimp wire cup brushes are designed for use with low speed electric drills for removing scale, rust, and paint and other surface preparation including deburring and polishing.
- Crimp wire brushes are not as aggressive as their twist knot equivalents.
- These brushes are constructed using hi-tensile wire to ensure superior performance and a long life.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BrushwareBORDO Hex Shank End Brush NylonGrit
- 25mm NylonGrit End Brush with hex shank
- NylonGrit
- Bordo NylonGrit brushes are constructed using grit-impregnated nylon fibres that are self-replenishing as the brush ages.
- NylonGrit brushware maintains its shape and will not rust.
- It will not shed bristles under normal conditions.
- Abrasive grit is impregnated throughout each bristle.
- Safer to use, will not puncture skin.
- Ideal for Removing paints, corrosion, weld scale, surface rust and burns from metals.
- For preparing plastic, fibreglass, and rubber surfaces for adhesives.
- Preparing metal surfaces for primers and paint.
- For cleaning unfinished tile, stone, cement, and brick mortar.
- Removing old paint and finishes from wood.
- Cleaning and sanding wood turnings, railings, banisters, trim and moulding.
- Rounding and blending edges, cutouts and joints.
(0 reviews) -
BrushwareBORDO Hex Shank End Brush Steel Wire
- 25mm Steel Crimp Wire End Brush with hex shank
- Steel Wire
- Bordo hex shank crimp wire end brushes are designed for use with low speed electric drills for removing scale, rust, and paint and other surface preparation including deburring and polishing.
- Crimp wire brushes are not as aggressive as their twist knot equivalents.
- These brushes are constructed using hi-tensile wire to ensure superior performance and a long life.
(0 reviews) -
BrushwareBORDO Hex Shank Flapper NylonGrit
- 25mm NylonGrit End Brush with hex shank
- NylonGrit
- Bordo NylonGrit brushes are constructed using grit-impregnated nylon fibres that are self-replenishing as the brush ages.
- NylonGrit brushware maintains its shape and will not rust.
- It will not shed bristles under normal conditions.
- Abrasive grit is impregnated throughout each bristle.
- Safer to use, will not puncture skin.
- Ideal for Removing paints, corrosion, weld scale, surface rust and burns from metals.
- For preparing plastic, fibreglass, and rubber surfaces for adhesives.
- Preparing metal surfaces for primers and paint.
- For cleaning unfinished tile, stone, cement, and brick mortar.
- Removing old paint and finishes from wood.
- Cleaning and sanding wood turnings, railings, banisters, trim and moulding.
- Rounding and blending edges, cutouts and joints.
(0 reviews) -
BrushwareBORDO Hex Shank Wheel Brush NylonGrit
- NylonGrit
- Bordo NylonGrit brushes are constructed using grit-impregnated nylon fibres that are self-replenishing as the brush ages.
- NylonGrit brushware maintains its shape and will not rust.
- It will not shed bristles under normal conditions.
- Abrasive grit is impregnated throughout each bristle.
- Safer to use, will not puncture skin.
- Ideal for Removing paints, corrosion, weld scale, surface rust and burns from metals.
- For preparing plastic, fibreglass, and rubber surfaces for adhesives.
- Preparing metal surfaces for primers and paint.
- For cleaning unfinished tile, stone, cement, and brick mortar.
- Removing old paint and finishes from wood.
- Cleaning and sanding wood turnings, railings, banisters, trim and moulding.
- Rounding and blending edges, cutouts and joints.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BrushwareBORDO Hex Shank Wheel Brush Steel Wire
- Steel Wire
- Bordo hex shank crimp wire wheel brushes are designed for use with low speed electric drills for removing scale, rust, and paint and other surface preparation including deburring and polishing.
- Crimp wire brushes are not as aggressive as their twist knot equivalents.
- These brushes are constructed using hi-tensile wire to ensure superior performance and a long life.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hacksaws & BladesBORDO High Carbon Hacksaw Blades
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO High Carbon Steel Deck Bit
- High Carbon Steel 90° Triple Blade Countersink with 3.0mm HSS Pilot Drill.
- Bordo Deck Bits are fully adjustable to suit your specific fastener, timber species or custom application.
- Pilot drill hole to suit 10G screws.
- Prevents decking timber splitting.
- Adjustable, free spinning, non-marking collar.
- Wide gullets prevent the jamming and clogging of wood chips.
- Large gullets also provide an unobscured view of the operation.
- Replaceable HSS pilot drill.
- Heavy duty hex shank ensures maximum torque transfer & eliminates chuck slip.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsBORDO Hole Enlarger
- Hole Enlarger
- Enlarge any hole with ease.
- Re-cut your hole using a new size hole saw.
- Any hole between 52mm and 92mm can be enlarged.
- Suits all standard hole saws.
(0 reviews) -
Drill Bits & SetsBORDO HSS Centre Drill
- Bright Finish HSS No.1 Centre Drill 118° / 60°
- Centre Drills are used with a lathe to centre drill stock for mounting in the lathe.
- They are designed to drill a small diameter pilot hole followed by a 60° countersink which provides a bearing surface for the 60° point of the lathe centre.
- Centre drills are also used extensively with milling machines to accurately start holes.
- The hole locations can be dialled in using the milling machine’s calibrated hand wheels.
- The hole is then started using the centre drill.
- The large diameter shank on the centre drill holds the drill point right on centre.
- Once the hole is started, the centre drill is replaced with a drill of the desired diameter and the finished hole is then drilled.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO HSS Co5 Bright Cross Hole 60° Countersink
- Cross hole countersinks are ideal for countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals.
- The intersection of the hole and cone form the cutting edge on the tool.
- The cone is not truly symmetrical as it is essential that the cone retreats away from the cutting edge as the tool rotates.
- If this does not occur the cutting edge will lack clearance and rub rather than bite into the material.
- This clearance is referred to as cutting relief.
- The radially relieved single cutting edge provide fast stock removal with low vibration for chatter- free operation ensuring the smoothest finish.
- These tools are best used as deburring tools, where a burr, or sharp edge, from a previous machining operation needs to be removed for cosmetic and safety reasons, however they may be used in softer materials (such as wood or plastic) to create a countersunk hole for a screw.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO HSS Co5 Bright Cross Hole 60° Countersink Set
- 5 Pce 10-30mm 60 Degree HSS Co5 Cross Hole Countersink Set
- Cross hole countersinks are ideal for countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals.
- The intersection of the hole and cone form the cutting edge on the tool.
- The cone is not truly symmetrical as it is essential that the cone retreats away from the cutting edge as the tool rotates.
- If this does not occur the cutting edge will lack clearance and rub rather than bite into the material.
- This clearance is referred to as cutting relief.
- The radially relieved single cutting edge provide fast stock removal with low vibration for chatter- free operation ensuring the smoothest finish.
- These tools are best used as deburring tools, where a burr, or sharp edge, from a previous machining operation needs to be removed for cosmetic and safety reasons, however they may be used in softer materials (such as wood or plastic) to create a countersunk hole for a screw.
(0 reviews) -
Drill Bits & SetsBORDO HSS Co5 Bright Cross Hole 90° Countersink
- Cross hole countersinks are ideal for countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals.
- The intersection of the hole and cone form the cutting edge on the tool.
- The cone is not truly symmetrical as it is essential that the cone retreats away from the cutting edge as the tool rotates.
- If this does not occur the cutting edge will lack clearance and rub rather than bite into the material.
- This clearance is referred to as cutting relief.
- The radially relieved single cutting edge provide fast stock removal with low vibration for chatter- free operation ensuring the smoothest finish.
- These tools are best used as deburring tools, where a burr, or sharp edge, from a previous machining operation needs to be removed for cosmetic and safety reasons, however they may be used in softer materials (such as wood or plastic) to create a countersunk hole for a screw.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO HSS Co5 Bright Cross Hole 90° Countersink Set
- 5 Pce 10-30mm 90 Degree HSS Co5 Cross Hole Countersink Set
- Cross hole countersinks are ideal for countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals.
- The intersection of the hole and cone form the cutting edge on the tool.
- The cone is not truly symmetrical as it is essential that the cone retreats away from the cutting edge as the tool rotates.
- If this does not occur the cutting edge will lack clearance and rub rather than bite into the material.
- This clearance is referred to as cutting relief.
- The radially relieved single cutting edge provide fast stock removal with low vibration for chatter- free operation ensuring the smoothest finish.
- These tools are best used as deburring tools, where a burr, or sharp edge, from a previous machining operation needs to be removed for cosmetic and safety reasons, however they may be used in softer materials (such as wood or plastic) to create a countersunk hole for a screw.
(0 reviews) -
Drill Bits & SetsBORDO HSS Co5 Bright Single Flute 90° Countersink
- Single flute countersinks are ideal for countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals.
- The fluted countersink cutter is used to provide a heavy chamfer in the entrance to a drilled hole.
- This may be required to allow the correct seating for a countersunk head screw or to provide the lead in for a second machining operation such as tapping.
- Use on light to medium materials.
- Resharpenable.
- M35 Cobalt High Speed Steel offers increased wear and heat resistance in alloy steels, stainless steels and other abrasive or difficult materials.
- This increases tool life in all production applications.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO HSS Co5 Bright Single Flute 90° Countersink Set
- 5 Pce 10-30mm 90 Degree HSS Co5 Single Flute Countersink Set
- Single flute countersinks are ideal for countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals.
- The fluted countersink cutter is used to provide a heavy chamfer in the entrance to a drilled hole.
- This may be required to allow the correct seating for a countersunk head screw or to provide the lead in for a second machining operation such as tapping.
- Use on light to medium materials.
- Resharpenable.
- M35 Cobalt High Speed Steel offers increased wear and heat resistance in alloy steels, stainless steels and other abrasive or difficult materials.
- This increases tool life in all production applications.
(0 reviews) -
Drill Bits & SetsBORDO HSS Co5 Bright Triple Flute 90° Countersink
- Triple flute countersinks are ideal for countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals.
- The three fluted countersink is self centering with wide flutes and is used to provide a heavy chamfer in the entrance to a drilled hole.
- This may be required to allow the correct seating for a countersunk head screw or to provide the lead in for a second machining operation such as tapping.
- Use on medium to hard materials.
- Resharpenable.
- M35 Cobalt High Speed Steel offers increased wear and heat resistance in alloy steels, stainless steels and other abrasive or difficult materials.
- This increases tool life in all production applications.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO HSS Co5 Bright Triple Flute 90° Countersink Set
- 5 Pce 10-31mm 90 Degree HSS Co5 Triple Flute Countersink Set
- Triple flute countersinks are ideal for countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals.
- The three fluted countersink is self centering with wide flutes and is used to provide a heavy chamfer in the entrance to a drilled hole.
- This may be required to allow the correct seating for a countersunk head screw or to provide the lead in for a second machining operation such as tapping.
- Use on medium to hard materials.
- Resharpenable.
- M35 Cobalt High Speed Steel offers increased wear and heat resistance in alloy steels, stainless steels and other abrasive or difficult materials.
- This increases tool life in all production applications.
(0 reviews) -
Drill Bits & SetsBORDO HSS Co5 TiN Coated Cross Hole 90° Countersink
- Cross hole countersinks are ideal for countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals.
- The intersection of the hole and cone form the cutting edge on the tool.
- The cone is not truly symmetrical as it is essential that the cone retreats away from the cutting edge as the tool rotates.
- If this does not occur the cutting edge will lack clearance and rub rather than bite into the material.
- This clearance is referred to as cutting relief.
- The radially relieved single cutting edge provide fast stock removal with low vibration for chatter- free operation ensuring the smoothest finish.
- These tools are best used as deburring tools, where a burr, or sharp edge, from a previous machining operation needs to be removed for cosmetic and safety reasons, however they may be used in softer materials (such as wood or plastic) to create a countersunk hole for a screw.
- Titanium Nitride (TiN) Coated Countersinks have a very hard gold coloured surface finish.
- This coating is only a few microns thick and is achieved by Physical Vapour Deposition (PVD).
- This treatment results in reduced friction, greater heat dissipation and reduced cold welding – which means higher speed and feed rates with greatly increased tool life.
- As with all surface coated tools, performance will deteriorate after resharpening.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO HSS Co5 TiN Coated Cross Hole 90° Countersink Set
- 5 Pc 10-30mm 90 Degree TiN Coated Cross Hole Countersink Set
- Cross hole countersinks are ideal for countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals.
- The intersection of the hole and cone form the cutting edge on the tool.
- The cone is not truly symmetrical as it is essential that the cone retreats away from the cutting edge as the tool rotates.
- If this does not occur the cutting edge will lack clearance and rub rather than bite into the material.
- This clearance is referred to as cutting relief.
- The radially relieved single cutting edge provide fast stock removal with low vibration for chatter- free operation ensuring the smoothest finish.
- These tools are best used as deburring tools, where a burr, or sharp edge, from a previous machining operation needs to be removed for cosmetic and safety reasons, however they may be used in softer materials (such as wood or plastic) to create a countersunk hole for a screw.
- Titanium Nitride (TiN) Coated Countersinks have a very hard gold coloured surface finish.
- This coating is only a few microns thick and is achieved by Physical Vapour Deposition (PVD).
- This treatment results in reduced friction, greater heat dissipation and reduced cold welding – which means higher speed and feed rates with greatly increased tool life.
- As with all surface coated tools, performance will deteriorate after resharpening.
(0 reviews) -
Drill Bits & SetsBORDO HSS Co5 TiN Coated Single Flute 90° Countersink
- Single flute countersinks are ideal for countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals.
- The fluted countersink cutter is used to provide a heavy chamfer in the entrance to a drilled hole.
- This may be required to allow the correct seating for a countersunk head screw or to provide the lead in for a second machining operation such as tapping.
- Use on light to medium materials.
- Resharpenable.
- M35 Cobalt High Speed Steel offers increased wear and heat resistance in alloy steels, stainless steels and other abrasive or difficult materials.
- This increases tool life in all production applications.
- Titanium Nitride (TiN) Coated Countersinks have a very hard gold coloured surface finish.
- This coating is only a few microns thick and is achieved by Physical Vapour Deposition (PVD).
- This treatment results in reduced friction, greater heat dissipation and reduced cold welding – which means higher speed and feed rates with greatly increased tool life.
- As with all surface coated tools, performance will deteriorate after resharpening.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO HSS Co5 TiN Coated Single Flute 90° Countersink Set
- 5 Pc 10-30mm 90 Degree TiN Coated Single Flute Countersink Set
- Single flute countersinks are ideal for countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals.
- The fluted countersink cutter is used to provide a heavy chamfer in the entrance to a drilled hole.
- This may be required to allow the correct seating for a countersunk head screw or to provide the lead in for a second machining operation such as tapping.
- Use on light to medium materials.
- Resharpenable.
- M35 Cobalt High Speed Steel offers increased wear and heat resistance in alloy steels, stainless steels and other abrasive or difficult materials.
- This increases tool life in all production applications.
- Titanium Nitride (TiN) Coated Countersinks have a very hard gold coloured surface finish.
- This coating is only a few microns thick and is achieved by Physical Vapour Deposition (PVD).
- This treatment results in reduced friction, greater heat dissipation and reduced cold welding – which means higher speed and feed rates with greatly increased tool life.
- As with all surface coated tools, performance will deteriorate after resharpening
(0 reviews) -
Drill Bits & SetsBORDO HSS Co5 TiN Coated Triple Flute 90° Countersink
- Triple flute countersinks are ideal for countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals.
- The three fluted countersink is self centering with wide flutes and is used to provide a heavy chamfer in the entrance to a drilled hole.
- This may be required to allow the correct seating for a countersunk head screw or to provide the lead in for a second machining operation such as tapping.
- Use on medium to hard materials.
- Resharpenable.
- M35 Cobalt High Speed Steel offers increased wear and heat resistance in alloy steels, stainless steels and other abrasive or difficult materials.
- This increases tool life in all production applications.
- Titanium Nitride (TiN) Coated Countersinks have a very hard gold coloured surface finish.
- This coating is only a few microns thick and is achieved by Physical Vapour Deposition (PVD).
- This treatment results in reduced friction, greater heat dissipation and reduced cold welding – which means higher speed and feed rates with greatly increased tool life.
- As with all surface coated tools, performance will deteriorate after resharpening.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsBORDO HSS Cobalt Bi-Metal Hole Saw
- Bordo bi-metal hole saws are premium quality, general purpose saws suitable for a wide variety of materials and applications.
- The high-speed steel cobalt (HSS-Co) cutting edge provides shock resistant teeth and resists tooth strippage.
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration.
- 48mm (1-7/8″) depth of cut.
- 5mm (3/16″) thick heavy-duty backing plate eliminates need for drive plate.
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas.
- Ideal for plumbing, construction, aircraft, electrical, maintenance, and automotive applications.
- Use in steel, aluminium, brass, cast iron, plastic, wood and a wide variety of other materials.
- Can be used in stainless steel with use of a cutting lubricant, reduced spindle speed and sufficient feed pressure to produce chips.
- Repetition hole cutting in stainless steel is best suited to Bordo XP and XP2 hole saws.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page