Industrial Equipment & Supplies
Showing 4357–4392 of 13395 results
-
VicesITM Groz Hobby Vice with Integrated Clamp
While ideal for use by model makers and DIY enthusiasts, these can also be used by the serious craftsman for light duty jobs.
Manufactured from high quality grey iron castings, these are machined to close tolerances resulting in smooth operation and reliability. Vices have an attractive enamelled finish with main screw and handle in chrome plated finish.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Punches & Punch SetsITM Groz Hollow Punch Set 6pc
Features
Hollow & Arch Punches are used for punching round holes in gasket material, leather, rubber, canvas, cardboard, plastic & other soft material.
Special design of the cutting edge prevents jamming of material inside the punch. Cutting edge is induction hardened for extended working life.Specifications
6 Piece Set Includes:
5mm
6mm
8mm
10mm
11mm
12mm(0 reviews) -
Punches & Punch SetsITM Groz Hollow Punches
Hollow & Arch Punches are used for punching round holes in gasket material, leather, rubber, canvas, cardboard, plastic & other soft material.
Special design of the cutting edge prevents jamming of material inside the punch. Cutting edge is induction hardened for extended working life.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Gauges & IndicatorsITM Groz Internal Dial Caliper Gauge
For checking internal bores, grooves and recesses.
Each revolution is indicated by a revolution counter.
Resolution : 0.025mm (0.001″).
Accuracy : ±0.05mm (±0.002″).
Measuring tip diameter : 0.06″.
White dial face(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
MicrometersITM Groz IP54 Electronic Micrometer
IP54 rated enclosure – Limited protection against dust ingress and protection against splash water.
Friction thimble.
Chrome plated frame with heat shield.
Metric and imperial digital readout on LCD screen.
Carbide anvil for added durability with 0.6 micron (0.000024″) flatness.
Resolution : 0.001 mm (0.00005″).
Supplied with master for periodic calibration.
Supplied in moulded plastic case(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
MicrometersITM Groz IP65 Electronic Outside Micrometer
IP65 rated enclosure – Totally protected against dust ingress and protection against splash water.
Ratchet thimble.
Chrome plated frame with heat shield.
Metric and imperial digital readout on LCD screen.
Carbide anvil for added durability with 0.6 micron (0.000024″) flatness.
Resolution : 0.001 mm (0.00005″).
Supplied in moulded plastic case(0 reviews) -
Punches & Punch SetsITM Groz Letter Punch Sets
Manufactured from quality carbon steel. Punches are induction hardened, which gives durability and extended life for repeated use. The hardness at the stamping end is maintained at 58-62 HRC, the striking end is tempered to 38-43 HRC. This prevents the punch from splintering during use. The striking end is chamfered to prevent breakage.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Punches & Punch SetsITM Groz Long Heavy Duty Pin Punches
Pin Punches are manufactured from high quality carbon steel, accurately hardened and tempered so that the pin will withstand continuous use and the striking end will not splinter. These are induction hardened to ensure consistent hardness and a special tempering process prevents the head from fracturing, thereby preventing accidents.
Single piece construction with hexagonal shank. Imparts additional durability to the punch. Working ends are accurately ground and the punch body is in premium powder coated finish.
The extra Long Pin Punches are useful for all applications where added leverage is required.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Gauges & IndicatorsITM Groz Magnetic Compass
An extremely versatile tool that can be used as an Angle Finder, Centre Locator & Levelling Gauge.
Tool is designed to give accurate reading of angles for full 360° via an extremely sensitive & balanced needle.
The protractor body is encased in cast aluminium shell with legs made from cast iron. The Vee bases have inbuilt magnets that exert magnetic pull both within the Vee & across the bottom surface of the legs of the Vee. This allows the tool to attach instantly to any ferrous surface “” round or flat for accurate measurement of angles.
The Vee bases are precision ground and the centre pin shows the middle point for locating centres on round objects. Can also be used for levelling work on workpieces.This tool has unlimited applications and can be used in:.
– Tool rooms & machine shops for determining angles on shapers, milling machines & grinders. For determining centre of round stocks, & for drilling operations.
– Welding Shops.
– Construction & Maintenance sites.
– Auto & Truck shops, especially for checking angles of die lines.
Angle Accuracy: within ± 0.5°.(0 reviews) -
Gauges & IndicatorsITM Groz Metric Feeler Gauges
Essential tool for checking valve tolerances, point gaps and other critical measurements.
Made from stainless steel.
Each leaf is marked with its thickness.
Locknut secures one or more leaves in position and each leaf is detachable if necessary.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Gauges & IndicatorsITM Groz Multi-Use Rule & Gauge
Can be used as:.
A Drill Point Gauge for checking 59° angle drill points.
A Protractor for measuring and laying out angles.
A Centre Finder for locating centres on shafts and circles.
A Circle Divider for dividing circles into sectors, polygons and polygrams (up to nine equal parts).
Tap and Drill Table shows popular tap sizes and corresponding drills sizes for American National threads.Manufactured from stainless steel, this multi use tool comes complete with a 100mm (4″) rule with permanently etched graduations in millimeters and 64th.
(0 reviews) -
Punches & Punch SetsITM Groz Nail Punch Set 3pc
Features
Manufactured from high grade carbon steel, accurately hardened and tempered for increased service life. Clean-cut knurled round shank provides a positive non-slip grip. The 9.5mm (3/8″) square head provides a larger striking area and also prevents the punch from rolling off. The striking end is chamfered to prevent breakage. This range of punches has a black oxide finish.
Nail Punches are designed for driving nail heads below the surface of wood. The working end is cupped to follow the nail head without sliding off. These can also be used to remove nails that have an exposed point.Specifications
3 Piece Set Includes:
1/32″
1/16″
3/32″(0 reviews) -
Punches & Punch SetsITM Groz Nail Punches
Manufactured from high grade carbon steel, accurately hardened and tempered for increased service life. Clean-cut knurled round shank provides a positive non-slip grip. The 9.5mm (3/8″) square head provides a larger striking area and also prevents the punch from rolling off. The striking end is chamfered to prevent breakage. This range of punches has a black oxide finish.
Nail Punches are designed for driving nail heads below the surface of wood. The working end is cupped to follow the nail head without sliding off. These can also be used to remove nails that have an exposed point.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Punches & Punch SetsITM Groz Number Punch Sets
Manufactured from quality carbon steel. Punches are induction hardened, which gives durability and extended life for repeated use. The hardness at the stamping end is maintained at 58-62 HRC, the striking end is tempered to 38-43 HRC. This prevents the punch from splintering during use. The striking end is chamfered to prevent breakage.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
MicrometersITM Groz Outside Micrometer
Ratchet stop.
Enamel frame.
Carbide anvil with 0.000024″ (0.6 mircron) flatness.
Accuracy : 4 micron (0.00015″).
Resolution : 0.01mm.
Ratchet thimble.
Supplied in moulded plastic case(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
MicrometersITM Groz Outside Micrometer Set
Ratchet stop.
Enamel frame.
Carbide anvil with 0.000024″ (0.6 mircron) flatness.
Accuracy : 4 micron (0.00015″).
Resolution : 0.01mm.
Ratchet thimble.
Supplied with master for periodic calibration (except 0 – 25mm & 0 – 1″).
Supplied in moulded plastic case(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Punches & Punch SetsITM Groz Pin Punch Set 4pc
Features
These round shank pin punches have clean and well cut knurling which provides positive, non slip grip. This range of punches has rust inhibiting black oxide finish.
Single piece construction with a 45mm (1-3/4″) long pin.Specifications
4 Piece Set Includes:
1/8″
5/32″
3/16″
1/4″
Vinyl Pouch(0 reviews) -
Punches & Punch SetsITM Groz Pin Punch Set 5pc
Features
These round shank pin punches have clean and well cut knurling which provides positive, non slip grip. This range of punches has rust inhibiting black oxide finish.
Two piece construction with a 90mm (3-3/4″) long pin. The two piece construction allows the pin to have a separate hardness from the body which prevents “œpeening” and also ensures complete straightness over such a long length.Specifications
5 Piece Set Includes:
1/8″
3/16″
1/4″
5/16″
3/8″
Vinyl Pouch(0 reviews) -
Punches & Punch SetsITM Groz Pin Punch Set 8pc
Features
These round shank pin punches have clean and well cut knurling which provides positive, non slip grip. This range of punches has rust inhibiting black oxide finish.
Two piece construction with a 90mm (3-3/4″) long pin. The two piece construction allows the pin to have a separate hardness from the body which prevents “œpeening” and also ensures complete straightness over such a long length.Specifications
8 Piece Set Includes:
1/16″
3/32″
1/8″
5/32″
3/16″
1/4″
5/16″
3/8″
Vinyl Pouch(0 reviews) -
Punches & Punch SetsITM Groz Pin Punch Set 8pc
Features
These round shank pin punches have clean and well cut knurling which provides positive, non slip grip. This range of punches has rust inhibiting black oxide finish.
Single piece construction with a 45mm (1-3/4″) long pin.Specifications
8 Piece Set Includes:
1/16″
3/32″
1/8″
5/32″
3/16″
7/32″
1/4″
5/16″
Round Wooden Case(0 reviews) -
Gauges & IndicatorsITM Groz Radius Gauges
Very useful for tool and diemakers, machinists, screw machine operators and pattern makers to lay out and check radii of tools, dies, and patterns.
Made of stainless steel.
Size is marked on each gauge leaf.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Punches & Punch SetsITM Groz Roll Pin Punch Set 6pc
Features
Single piece construction with hexagonal shank imparts additional durability. Body has a premium powder coated finish with chamfered striking end that helps reduce mushrooming & chipping.
The heat – treated point has a rounded ball to centre the point into the pin allowing the point shoulder to maintain maximum contact with the pin during removal and eliminating any damage to the pin or wall.Specifications
6 Piece Set Includes:
2.5mm
3mm
4mm
5mm
6mm
8mm(0 reviews) -
Punches & Punch SetsITM Groz Roll Pin Punches
Single piece construction with hexagonal shank imparts additional durability. Body has a premium powder coated finish with chamfered striking end that helps reduce mushrooming & chipping.
The heat-treated point has a rounded ball to centre the point into the pin allowing the point shoulder to maintain maximum contact with the pin during removal and eliminating any damage to the pin or wall.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Gauges & IndicatorsITM Groz Screw Cutting Gauge
Manufactured from hardened and polished stainless steel, all gauge surfaces are accurately ground.
It is most useful for checking tool angle while cutting threads in metal turning lathes. The angle on the thread cutting tool is checked on the V slots in the gauge.
Relief at the end of each slot enables proper seating of the cutting tool in the slot thus ensuring correct angle.
The gauge clearly indicates 55° for Whitworth and BSF Threads; 47-1/2° for BA Threads, 60° for Metric and American National Threads and 14-1/2° for Acme threads.(0 reviews) -
Gauges & IndicatorsITM Groz Sheet Metal & Wire Gauge
Made from heavy gauge hardened stainless steel.
Designed for measuring steel wire, hot & cold rolled steel sheet etc & check sizes from 0 to 36 gauge.
The gauge has metric dimensions marked on one side and gauge markings on the other.
Accuracy : within 100 microns.(0 reviews) -
Gauges & IndicatorsITM Groz Universal Surface Gauge
A basic tool for machinists and toolmakers, the Universal Surface Gauge is used for accurately scribing lines, transferring measurements or probing surfaces in inspection work.
Design incorporates:.
A fully hardened and ground base which serves as an accurate reference surface.
A machined Vee groove in the base allows the gauge to be used conveniently on curved surfaces.
A Vee groove at the front end allows the spindle to adjust to any angle above or below the base allowing it to be used as a height gauge and also as a depth gauge.
Two retractable pins allow the gauge to be located against the edge of a surface plate or T-slot for linear work.
A 6.34 mm hole in the spring loaded scriber holder allows a dial indicator to be attached conveniently making the gauge useful for checking flatness, parallelism, heights, depths etc.
Grooves on the side of the base allow for comfortable grip.
Well tapered scriber for better sighting while working. The scriber tip is hardened to 55-60 HRC.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Vernier CalipersITM Groz Vernier Caliper
Metric & Imperial.
Stainless steel rule.
Convenient to use thumb screw locking mechanism.
Suitable for inside, outside, depth & step measurements.
Lower resolution : 0.02mm(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Depth GaugesITM Groz Vernier Depth Gauge
Made from stainless steel with thumbscrew locking mechanism.
Metric & Imperial.
Extendable depth gauge.
Accuracy : ± 0.05mm.
Resolution : 0.05mm.
Supplied in moulded plastic case(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Grinding MachinesITM Heavy Duty Bench Grinder Stand
Features
Industrial Bench Grinder Stand for use with most 200mm and 250mm Bench Grinders.
Excellent work height for comfortable extended use.
Heavy duty steel construction.
Parts/Water tray holder on front (tray not included).
Pre-slotted top plate for multi-fit applications.
Pre-drilled base plate for easy mounting.
Heavy duty powder coat finish.Specifications
Total Height: 855mm
Weight: 11.5kg
Top Plate: 350mm x 250mm x 5mm
Base Plate: 350mm x 250mm x 5mm
Upright Tube Dimension: 100mm x 100mm(0 reviews) -
Grinding MachinesITM Heavy Duty Bench Grinder Stand with Emergency Stop Switch
Features
Industrial Bench Grinder Stand for use with most 200mm and 250mm Bench Grinders.
Includes emergency stop switch.
Excellent work height for comfortable extended use.
Heavy duty steel construction.
Pre-slotted top plate for multi-fit applications.
Pre-drilled base plate for easy mounting.
Heavy duty powder coat finish.Specifications
Total Height: 855mm
Weight: 14kg
Top Plate: 350mm x 250mm x 5mm
Base Plate: 350mm x 250mm x 5mm
Upright Tube Dimension: 100mm x 100mm(0 reviews) -
VicesITM Hinged Pipe Vice
Superb hinged pipe vice with hardened steel jaws & close grained cast iron body.
Hinged section allows quick access to material.
Perfect for repetitive clamping tasks(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Annular CuttersITM Holemaker 100mm Depth Maxi-Cut Annular Cutters
As well as providing excellent life in mild steel, Tungsten Carbide Tipped Cutters are suitable for drilling difficult materials eg. stainless steel, Bisalloy and wear plate.
These Tungsten Carbide Tipped Cutters consist of an alloy metal body, and tungsten carbide cutting teeth. Due to this composition, these cutters are less susceptible to breakage than standard high speed steel cutters, especially in larger diameters and longer lengths.
The tungsten carbide cutting teeth can also be sharpened and replaced.Pilot Pin To Suit 14mm to 17mm Diameter- SP16009
Pilot Pin To Suit 18mm Diameter and Above- SP18100(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Annular CuttersITM Holemaker 150mm Depth Maxi-Cut Annular Cutters
As well as providing excellent life in mild steel, Tungsten Carbide Tipped Cutters are suitable for drilling difficult materials eg. stainless steel, Bisalloy and wear plate.
These Tungsten Carbide Tipped Cutters consist of an alloy metal body, and tungsten carbide cutting teeth. Due to this composition, these cutters are less susceptible to breakage than standard high speed steel cutters, especially in larger diameters and longer lengths.
The tungsten carbide cutting teeth can also be sharpened and replaced.Pilot Pin to Suit – SP18150
For use with solid materials over 100mm, use the 2 stage pilot pin Part No. SP20007(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Annular CuttersITM Holemaker 200mm Depth Maxi-Cut Annular Cutters
As well as providing excellent life in mild steel, Tungsten Carbide Tipped Cutters are suitable for drilling difficult materials eg. stainless steel, Bisalloy and wear plate.
These Tungsten Carbide Tipped Cutters consist of an alloy metal body, and tungsten carbide cutting teeth. Due to this composition, these cutters are less susceptible to breakage than standard high speed steel cutters, especially in larger diameters and longer lengths.
The tungsten carbide cutting teeth can also be sharpened and replaced.Pilot Pin to Suit – SP18200
For use with solid materials over 100mm, use the 2 stage pilot pin Part No. SP20009(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Gold SeriesITM Holemaker 25mm Depth Gold Series Annular Cutters
TITANIUM NITRIDE COATING.
The Titanium Nitride coating significantly increases the tool life by providing the following benefits:.
– Increased surface hardness to 85HRC.
– Ceramic surface, reducing friction by up to 30%.
– Especially resistant to cold welding.
– Suitable for cutting a wide range of materials.M2AL HIGH SPEED STEEL MATERIAL.
M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.STEP HARDENED PROCESS.
This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.MULTI-CUT GEOMETRY.
Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centring.FULLY GROUND WITH INTERNAL RELIEF.
This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.UNIVERSAL SHANK.
19.05mm (3/4) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.Pilot Pin To Suit – SP16003
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Pro Cut Powder SteelITM Holemaker 25mm Depth Pro-Cut Annular Cutters
Pro-Cut ASP® powder steel cutters offer incredible wear resistance & ductility.
ASP® steels are produced by powder metallurgy through a 3-step process: gas-atomisation, hot isostatic pressing and post processing operations such as forging, rolling or drawing.
Suitable for drilling railway line, stainless steel & hardened steels, where high wear resistance and lifetime are required.
Incredible wear resistance.
Uniform micro structure.
Less susceptible to breakagePilot Pin To Suit – SP16003
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page