Industrial Equipment & Supplies
Showing 3889–3924 of 7117 results
-
Chemicals, Lubricants & AdhesivesLANOTEC Type ‘A Grease & Soft Grease
• Anti-seize, anti-galling
• Assembly lubricant & rubber grease
• Protects electrical components from moisture including
connectors – multi pin plugs
• Prevents galling of stainless steel and aluminium
• Stops electrolysis due to dissimilar metals
• Ideal anti-seize for non grease-able pins (lanolin never dries out).
• Belt dressing
• Metal to metal soft seal gasket
• Drilling & cutting aid
• Welding nozzle dip – non flammable(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesLANOTEC Wire Rope Lube
• Suitable for all wire ropes above 16mm or any wire ropes operating in corrosive environments
• Ideal for rig and marine cranes, or any wire ropes working in the splash zone
• Ideal for use around waterways and coastal environments
• Lubrication of ropes in environmentally sensitive areas where salt water is an issue
• Ideal for use on industrial high load bearing chains(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Log BooksLarge Excavator Safety Check Logbook
A5 SIZE.
DAILY PRE START & AFTER START CHECKS.
12 MONTHS RECORDING, 7 DAYS PER WEEK.
FAULT REPORTING.
SERVICING DETAILS.
PREFERRED SERVICE PROVIDERS.
SUPPLIED IN A RESEALABLE PLASTIC POCKET.
(0 reviews) -
Diesel HeatersLAVOR FF175 Diesel Heater
The FF175 Fan Forced Space Diesel Heater produces 175,000 BTU or 51.3KW of heat. The unit requires 240v power to run the fan and the spark transformer.
This forced air heater has a thermostat control where one can set the unit to run up to a predetermined temperature. When the air temperature reaches this level, the heater automatically shuts off. Equally when the temperature drops below the thermostat setting, the heater automatically turns back on. Along with the thermostat, the diesel heater has a digital display showing the ambient air temperature.
The heater has a 49 litre fuel tank allowing for a runtime of approximately 10 hours. Kerosine can also be used as fuel for this heater.
(0 reviews) -
Diesel HeatersLAVOR FF70 Diesel Heater
The FF70 Fan Forced Diesel Space Heater produces 70,000 BTU or 21KW of heat. The heater requires 240V power to run the fan and the spark transformer.
This diesel heater has a 19 litre tank allowing for a runtime of up to 9 hours. Weighing only 12 kgs empty and approximately 30 kgs with a full fuel load, the heater is relatively portable and lightweight.
The unit has a thermostat control where one can set the unit to run up to a predetermined temperature and when the ambient air temperature reaches this level, the heater automatically shuts off. Equally when the temperature drops below the preset setting, the heater turns back on.
(0 reviews) -
Diesel HeatersLAVOR PT125SS Diesel Heater
The PT125SS Radiant Space Diesel Heater produces 125,000 BTU or 37KW of heat. The diesel heater has a 56 litre fuel tank allowing the unit a runtime of around 17 hours. Additionally, kerosine is an alternative fuel which can be used on this heater.
This radiant diesel heater also offers a gentle fan forced airflow. Consequently, this is a very low noise alternative to the high noise fan forced heating process.
A thermostat control with a digital ambient air temperature display allows for precise control over the heat generated for this unit. The heater weighs 38kgs while empty, but with a full tank a fuel can be quite cumbersome. While this unit has wheels for portability, it is generally a “leave in one place” type heater.
(0 reviews) -
Diesel HeatersLAVOR PT70SSPlus Diesel Heater
The PT70SSPlus Diesel Heater is a quiet alternative to what has been the more traditional Fan Forced Diesel space heaters. The machine has a very gentle and quiet fan. Consequently, the fan operates to disperse the heat on the front face of the unit.
With fuel consumption of only 1.9 l/h, the 15 litre fuel tank gives a run time of approximately 7 hours. In addition, this is now further assisted by a Thermostat control on the heater. As a result, the digital display shows the current ambient air temperature.
The unit can also run on Kerosine fuel for a cleaner and hotter burn.
Please note: The video shown in the VIDEO tab is the older PT70SS model. That particular model is very similar except it had a 12 litre fuel tank, 6 hours run time and no thermostat control.
(0 reviews) -
Pole StrapsLINQ 2m Rope Kermantle
2m Rope Kernmantle c/w RG13D with Perm KTASA26 Ers Cover & Snap Hook to Thimble
(0 reviews) -
LanyardsLINQ Adjustable Rope Lanyard
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
AccessoriesLINQ Anchor Strap Webbing Interlocking
- Rating – 22kN
- Complies to AS/NZS 5532:2013 Third Party NATA Accredited
- Available in 1.0M, 1.5M & 2M Lengths
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
AccessoriesLINQ Anchor Straps Endless Round 25mm
- Rating – 22kN
- Complies to AS/NZS 5532:2013 Third Party NATA Accredited
- Available in 1.5M & 2M Lengths
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
AccessoriesLINQ Anchor Straps Endless Round 44mm
- Rating – 22kN
- Complies to AS/NZS 5532:2013 Third Party NATA Accredited
- Available in 1M, 1.5M & 2M Lengths
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
AccessoriesLINQ Anchor T-Bar 15kn
- The LINQ Tetha T Bar anchor plates are engineered for extreme workplace situations.
- Boasting a minimum breaking strength of 15kN, the range has been developed to be a durable and efficient temporary roof line anchor system.
- (It is important to ensure that the structure to which any LINQ Tetha anchor plate is installed, has sufficient strength (refer to ASNZS 1891.4) to sustain the applied load.)
- An affordable temporary and reusable alternative to installation of a permanent purlin style anchor
- Compact design and lightweight materials provide a tried and tested safety solution
- Rated for up to a 140kg user
- Can withstand fall arrest forces up to 15kN (It is important to ensure that the structure to which any LINQ Tetha anchor plate is installed, has sufficient strength (refer to ASNZS 1891.4) to sustain the applied load)
- The Tetha T-Bar has an easy to use double tie off L-screw and wing nut applicator that clips onto the roof edge (for suitable profiles only)
- Can be used as a temporary anchor point in applications along a roof line where no permanent anchor point exists.
- Quick installation and removal. (Installation should always be conducted by a competent person as described in ASNZS 1891.4)
- Suitable for Fall Arrest application on metal roofs.
- To be used on metal clad roofs only
- Conforms to ASNZS 1891.4 requirements
(0 reviews) -
AccessoriesLINQ Anchor Tetha Bar Straight
- The LINQ Anchor Tetha V-Bar temporary anchor plates are engineered for extreme workplace situations.
- Boasting a minimum breaking strength of 15kN, the range has been developed to be a durable and efficient temporary roof line anchor system.
- An affordable temporary and reusable alternative to installation of a permanent purlin style anchor
- Compact design and lightweight materials provide a tried and tested safety solution
- Rated for up to a 140kg user
- Can withstand fall arrest forces up to 15kN (It is important to ensure that the structure to which any LINQ Tetha anchor plate is installed, has sufficient strength (refer to ASNZS 1891.4) to sustain the applied load)
- The Tetha T-Bar has an easy to use double tie off L-screw and wing nut applicator that clips onto the roof edge (for suitable profiles only)
- Can be used as a temporary anchor point in applications along a roof line where no permanent anchor point exists.
- Quick installation and removal. (Installation should always be conducted by a competent person as described in ASNZS 1891.4)
- Provides safe 360 degree work area
- For use on metal or tile roofs
- Conforms to ASNZS 1891.4 requirements
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Height Safety KitsLINQ Basic Roofers Kit
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
-
AccessoriesLINQ Confined Space Spreader Bar
- The LINQ Confined Space Spreader Bar is designed for use with harnesses incorporating confined space loops or D-rings and is ideal for conned space entry/exit and rescue and retrieval applications. Comes with Snap Hook attachments to secure the worker.
(0 reviews) -
Confined Space EntryLINQ Davit Arm Cantilever Stainless Steel
- Durable stainless steel for high corrosion resistance.
- 360-degree swivel capability when mounted to TETHA-ARM floor base for complete versatility.
- Cantilever arm with 3 defined adjustment points, provides great reach and access. Refer to table and diagram on the product data sheet download for specifications.
- Dual anchorage points on cantilever arm rated at 15kN makes this suitable for fall arrest.
- Can easily be connected to TETHA-ARM floor and wall mounts, further enhancing capabilities for use.
- TETHA-ARM can be paired with LINQ Rescue winch and LINQ Type 3 LOQ BLOQ for a complete confined space package.
(0 reviews) -
Confined Space EntryLINQ Davit Base Floor Mount
- Stainless steel floor mount for high corrosion resistance.
- Weight: 11.8kg
- Dimensions: 300W x 300L x 300Hmm, 3mm thick
(0 reviews) -
Confined Space EntryLINQ Davit Base Wall Mount
- Stainless steel wall mount for high corrosion resistance.
- Weight: 12.8kg
- Dimensions: 300W x 300L x 300Hmm, 3mm thick
(0 reviews) -
RopesLINQ Detachable Rope Grab
- The LINQ detachable rope grab is made from high strength aluminium, which makes this extremely lightweight, portable, and easy to use. The push button pin allows the worker to secure the rope grab at any time, whilst also allowing for quick and efficient removal when required.
- The non-aggressive cam design has smooth rounded teeth greatly reducing unnecessary wear to the outer rope sheath.
- Lightweight construction design for easy portability.
- Pip pin (push pin) axle for ease of securing and removal from rope.
- Plastic covered steel wire holds cam and pin in place to prevent loss of components.
- Non-aggressive cam precludes unnecessary wear and tear to rope when under tension.
- Hard wearing anodised finish.
- Certified to EN567.
- Weight: 185gms
- Suitable for rope from 9.0 mm- 13.0mm
(0 reviews) -
Hardware ConnectorsLINQ Double Action Scaff Hook
- Opening: 68mm
- Weight: 490gm
- Rating: 25kN
- Eye Size: 79mm
- Width: 118mm
- Length: 223mm
(0 reviews) -
LanyardsLINQ Double Adjustable Lanyard
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
LanyardsLINQ Double Adjustable Rope Lanyard
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
LanyardsLINQ Double Elasticated Lanyard
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
LanyardsLINQ Double Rope Lanyard
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
LanyardsLINQ Double Webbing Lanyard
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
-
HarnessesLINQ Elite Multi-Purpose Harness
- Pebble Weave Webbing design provides maximum grip for buckles, eliminating webbing slippage and the need for continual re-adjustment
- Liqui-Pel Technology for liquid protection, also easier to clean the harness
- High Tenacity UV stabilised webbing, enhances resistance to solvents and UV light degradation
- Retro-Reflective Thread in webbing for improved visibility in low light
- Rear Barr D allows easier access and better weight distribution for twin retractable fall arrest devices
- Closed Loop Webbing system on rear Dorsal Barr D maintains positioning of Dorsal D in the event of a fall. Significantly reducing the risk of injury from hardware hitting the back of workers head
- Extended Belay Loops make connection of hardware easier, also maintains absolute front and centre positioning as per AS/NZS requirements
- Sub Pelvic Strap integration along the line of Belay Loops, places the worker away from hardware in the event of a fall, significantly reducing the risk of injury from hardware hitting the worker
- Articulated Chest Strap and shoulder adjustment points, designed for additional user comfort and female users, due to lower positioning of strap
- Comes with Suspension Trauma Strap: One-piece Webbing with a quick connection buckle for faster deployment and connection in the event of a fall
- Air COOL Padded Shoulder Straps for increased comfort and increased air flow during long periods of use
- Padded Legs for force dispersion at moment of fall impact
- Confined Space Rescue Loops
- Adjustable Waist Belt with tool loop attachments
- Service Pouch on back
- 10 year life span from date of manufacture
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
HarnessesLINQ Elite Riggers Harness
- Pebble Weave Webbing design provides maximum grip for buckles, eliminating webbing slippage and the need for continual re-adjustment
- Liqui-Pel Technology for liquid protection, also easier to clean the harness
- High Tenacity UV stabilised webbing, enhances resistance to solvents and UV light degradation
- Retro-Reflective Thread in webbing for improved visibility in low light
- Rear Barr D allows easier access and better weight distribution for twin retractable fall arrest devices
- Closed Loop Webbing system on rear Dorsal Barr D maintains positioning of Dorsal D in the event of a fall. Significantly reducing the risk of injury from hardware hitting the back of workers head
- Extended Belay Loops make connection of hardware easier, also maintains absolute front and centre positioning as per AS/NZS requirements
- Sub Pelvic Strap integration along the line of Belay Loops, places the worker away from hardware in the event of a fall, significantly reducing the risk of injury from hardware hitting the worker
- Articulated Chest Strap and shoulder adjustment points, designed for additional user comfort and female users, due to lower positioning of strap
- Comes with Suspension Trauma Strap: One-piece Webbing with a quick connection buckle for faster deployment and connection in the event of a fall
- Air COOL Padded Shoulder Straps for increased comfort and increased air flow during long periods of use
- Padded Legs for force dispersion at moment of fall impact
- Confined Space Rescue Loops
- Quick Release Buckles. Padding under buckles
- Service Pouch on back
- 10 year life span from date of manufacture
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
HarnessesLINQ Elite Riggers Harness Stainless Steel
- Pebble Weave Webbing design provides maximum grip for buckles, eliminating webbing slippage and the need for continual re-adjustment
- Liqui-Pel Technology for liquid protection, also easier to clean the harness
- High Tenacity UV stabilised webbing, enhances resistance to solvents and UV light degradation
- Retro-Reflective Thread in webbing for improved visibility in low light
- Rear Barr D allows easier access and better weight distribution for twin retractable fall arrest devices
- Closed Loop Webbing system on rear Dorsal Barr D maintains positioning of Dorsal D in the event of a fall. Significantly reducing the risk of injury from hardware hitting the back of workers head
- Extended Belay Loops make connection of hardware easier, also maintains absolute front and centre positioning as per AS/NZS requirements
- Sub Pelvic Strap integration along the line of Belay Loops, places the worker away from hardware in the event of a fall, significantly reducing the risk of injury from hardware hitting the worker
- Articulated Chest Strap and shoulder adjustment points, designed for additional user comfort and female users, due to lower positioning of strap
- Comes with Suspension Trauma Strap: One-piece Webbing with a quick connection buckle for faster deployment and connection in the event of a fall
- Air COOL Padded Shoulder Straps for increased comfort and increased air flow during long periods of use
- Padded Legs for force dispersion at moment of fall impact
- Confined Space Rescue Loops
- Quick Release Buckles. Padding under buckles
- Service Pouch on back
- 100% Stainless Steel Hardware
- 10 year life span from date of manufacture
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
HarnessesLINQ Elite Riggers Harness with Dorsal Extension Strap
- Pebble Weave Webbing design provides maximum grip for buckles, eliminating webbing slippage and the need for continual re-adjustment
- Liqui-Pel Technology for liquid protection, also easier to clean the harness
- High Tenacity UV stabilised webbing, enhances resistance to solvents and UV light degradation
- Retro-Reflective Thread in webbing for improved visibility in low light
- Rear Barr D allows easier access and better weight distribution for twin retractable fall arrest devices
- Closed Loop Webbing system on rear Dorsal Barr D maintains positioning of Dorsal D in the event of a fall. Significantly reducing the risk of injury from hardware hitting the back of workers head
- Extended Belay Loops make connection of hardware easier, also maintains absolute front and centre positioning as per AS/NZS requirements
- Sub Pelvic Strap integration along the line of Belay Loops, places the worker away from hardware in the event of a fall, significantly reducing the risk of injury from hardware hitting the worker
- Articulated Chest Strap and shoulder adjustment points, designed for additional user comfort and female users, due to lower positioning of strap
- Comes with Suspension Trauma Strap: One-piece Webbing with a quick connection buckle for faster deployment and connection in the event of a fall
- Air COOL Padded Shoulder Straps for increased comfort and increased air flow during long periods of use
- Padded Legs for force dispersion at moment of fall impact
- Confined Space Rescue Loops
- Quick Release Buckles. Padding under buckles
- Service Pouch on back
- 10 year life span from date of manufacture
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Height Safety KitsLINQ Essential Contruction Heigtht Safety Kit
- LINQ Essential harness H101
- WLO1SNSN Shock Absorbing Webbing Lanyard Single Leg (with 2 x Snap Hooks) x 1
- HSASE2515 Anchor Strap Endless 25mm – 1.5M x 1
- KSGSA18 Screw Gate Karabiner x 2
- HSEML155 Manulink 155mm
- Kit Bag (HSKB710) x 1
(0 reviews) -
HarnessesLINQ Essential Harness
- Pebble Weave Webbing design provides maximum grip for buckles, eliminating webbing slippage and the need for continual re-adjustment
- High Tenacity UV stabilised webbing, enhances resistance to solvents and UV light degradation
- Retro-Reflective Thread in webbing for improved visibility in low light
- Large Dorsal D Ring for easier connection
- Closed Loop Webbing system on rear Dorsal D maintains positioning of Dorsal D in the event of a fall. Significantly reducing the risk of injury from hardware hitting the back of workers head
- Extended Belay Loops make connection of hardware easier, also maintains absolute front and centre positioning as per AS/NZS requirements
- Sub Pelvic Strap integration along the line of Belay Loops, places the worker away from hardware in the event of a fall, significantly reducing the risk of injury from hardware hitting the worker
- Articulated Chest Strap and shoulder adjustment points, designed for additional user comfort and female users, due to lower positioning of strap
- Padding under buckles
- Service Pouch on back
- 10 year life span from date of manufacture
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
HarnessesLINQ Essential Harness Stainless Steel
- Pebble Weave Webbing design provides maximum grip for buckles, eliminating webbing slippage and the need for continual re-adjustment
- High Tenacity UV stabilised webbing, enhances resistance to solvents and UV light degradation
- Retro-Reflective Thread in webbing for improved visibility in low light
- Large Dorsal D Ring for easier connection
- Closed Loop Webbing system on rear Dorsal D maintains positioning of Dorsal D in the event of a fall. Significantly reducing the risk of injury from hardware hitting the back of workers head
- Extended Belay Loops make connection of hardware easier, also maintains absolute front and centre positioning as per AS/NZS requirements
- Sub Pelvic Strap integration along the line of Belay Loops, places the worker away from hardware in the event of a fall, significantly reducing the risk of injury from hardware hitting the worker
- Articulated Chest Strap and shoulder adjustment points, designed for additional user comfort and female users, due to lower positioning of strap
- 100% Stainless Steel Hardware
- Padding under buckles
- Service Pouch on back
- 10 year life span from date of manufacture
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page
