Material Handling
Showing 397–432 of 472 results
-
Garage JacksTQB BRANDS Hydraulic Garage Jack 3,000kg
This TradeQuip “Made for the Trade” Professional Quality low profile 2906T Garage Jack with twin piston ‘quick lift’ technology provides extra lift per pump of the handle. Fast lowering two-piece twist handle is fitted with a foam bumper preventing possible panel damage when being pumped. With a knurled steel handle for a steady grip and a solid, rolled edge welded steel construction, this heavy duty quick lift dual pump garage jack is built to last.
Features:
- Tested in Australia ensuring full compliance with Mandatory Australian Standard AS2615:2016
- Professional quality rugged steel construction
- Low profile and deep reach
- 1400mm long handle for deeper reach
- Dual pump lift technology for a quicker lift
- Internal bypass valve overload protection
- Lead-free paint finish to ensure a long lasting finish and prevent rust
- Paint is oil, grease and dirt-resistant
- Protective foam handle cover prevents vehicle damage
Specifications:
- Safe Working Capacity: 3,000kg
- Minimum Height: 118mm
- Maximum Height: 488mm
- Handle Length: 1400mm
- Front Castors: 90mm diameter – 40mm width
- Rear Castors: 60mm diameter – 25mm width
- Saddle Diameter: 115mm
- Dimensions: 670mm(L) x 380mm(W) x 170mm(H)
- Weight: 43kg
NOTE: This Garage Jack must only be used on hard level surfaces and be free to roll during lifting and lowering. DO NOT get under a vehicle that is only supported by this Garage Jack. ALWAYS USE JACK STANDS!
WARNING: Always ensure the vehicle wheels are chocked before lifting.This Garage Jack is a lifting and lowering device only and is designed for lifting part of the total vehicle. Do not move or dolly the vehicle whilst the vehicle is on this Garage Jack.
Intended Use
A heavy-duty floor jack designed for lifting and lowering (NOT SUPPORTING) loads in an automotive workshop with added capacity and maximum lift height required to handle most UTES, SUV’s and light commercial vehicles.
(0 reviews) -
Bottle JacksTQB BRANDS Industrial Bottle Jack – 20,000kg
This powerful, heavy-duty Borum Industrial Hydraulic Bottle Jack with high quality glide-action pressure pump is designed for hard-hitting commercial use, making large loads easy to lift. The lightweight jack is ideal for lifting farm vehicles, heavy-duty machinery, industrial construction equipment and more. High quality, fitted with unique overload protection system and large stable base, this unit is ideal for daily use in a demanding environment.
Fitted with a safety overload valve for extra protection, the safety valve is installed between the pump and high-pressure check valve in the barrel/lift ram assembly. When attempting to raise a load greater than the jack’s capacity, the safety valve opens on each pump stroke and diverts any further oil back to the reservoir thus preventing the raising of the load.
The Borum BR02 series Bottle Jacks can be used horizontally when the pump is positioned above the ram housing or lying on their side with the pump positioned as per the illustrations below. Refer to the owners manual for more information.
Features
- Machined and polished cylinders with die-cut threads provide non-abrasive leak-free, durable performance
- Fabricated from hard-cast steel with heat-treated critical stress areas
- Specially designed internal hydraulics allow the jack to be operated vertically & horizontally
- Unique cross-type forged release valve assures positive load control
- Overload protection built into the hydraulic system ensures user safety
- 3-piece galvanised steel handle allows for easy & compact storage
Specifications
- Safe Working Capacity: 20,000kg
- Minimum Height: 270mm
- Maximum Height: 420mm
- Handle: 3-piece galvanised steel
- Carton: 231L x 182W x 294H mm
- Gross Weight: 12.6kg
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use support stands.
Intended Use
For heavy duty use on truck, agriculture, construction, mining, automotive, and marine applications where lifting and lowering is required.
(0 reviews) -
Bottle JacksTQB BRANDS Industrial Bottle Jack – 30,000kg
This powerful, heavy-duty Borum Industrial Hydraulic Bottle Jack with high quality glide-action pressure pump is designed for hard-hitting commercial use, making large loads easy to lift. The lightweight jack is ideal for lifting farm vehicles, heavy-duty machinery, industrial construction equipment and more. High quality, fitted with unique overload protection system and large stable base, this unit is ideal for daily use in a demanding environment.
Fitted with a safety overload valve for extra protection, the safety valve is installed between the pump and high-pressure check valve in the barrel/lift ram assembly. When attempting to raise a load greater than the jack’s capacity, the safety valve opens on each pump stroke and diverts any further oil back to the reservoir thus preventing the raising of the load.
The Borum BR02 series Bottle Jacks can be used horizontally when the pump is positioned above the ram housing or lying on their side with the pump positioned as per the illustrations below. Refer to the owners manual for more information.
Features
- Machined and polished cylinders with die-cut threads provide non-abrasive leak-free, durable performance
- Fabricated from hard-cast steel with heat-treated critical stress areas
- Specially designed internal hydraulics allow the jack to be operated vertically & horizontally
- Unique cross-type forged release valve assures positive load control
- Overload protection built into the hydraulic system ensures user safety
- 3-piece galvanised steel handle allows for easy & compact storage
Specifications
- Safe Working Capacity: 30,000kg
- Minimum Height: 280mm
- Maximum Height: 445mm
- Handle: 3-piece galvanised steel
- Carton: 241L x 165W x 315H mm
- Gross Weight: 19kg
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use support stands.
Intended Use
For heavy duty use on truck, agriculture, construction, mining, automotive, and marine applications where lifting and lowering is required.
(0 reviews) -
Bottle JacksTQB BRANDS Industrial Bottle Jack – 50,000kg
This powerful, heavy-duty Borum Industrial Hydraulic Bottle Jack with high quality glide-action pressure pump is designed for hard-hitting commercial use, making large loads easy to lift. The lightweight jack is ideal for lifting farm vehicles, heavy-duty machinery, industrial construction equipment and more. High quality, fitted with unique overload protection system and large stable base, this unit is ideal for daily use in a demanding environment.
Fitted with a safety overload valve for extra protection, the safety valve is installed between the pump and high-pressure check valve in the barrel/lift ram assembly. When attempting to raise a load greater than the jack’s capacity, the safety valve opens on each pump stroke and diverts any further oil back to the reservoir thus preventing the raising of the load.
The Borum BR02 series Bottle Jacks can be used horizontally when the pump is positioned above the ram housing or lying on their side with the pump positioned as per the illustrations below. Refer to the owners manual for more information.
Features
- Machined and polished cylinders with die-cut threads provide non-abrasive leak-free, durable performance
- Fabricated from hard-cast steel with heat-treated critical stress areas
- Specially designed internal hydraulics allow the jack to be operated vertically & horizontally
- Unique cross-type forged release valve assures positive load control
- Overload protection built into the hydraulic system ensures user safety
- 3-piece galvanised steel handle allows for easy & compact storage
Specifications
- Safe Working Capacity: 50,000kg
- Minimum Height: 300mm
- Maximum Height: 482mm
- Handle: 3-piece galvanised steel
- Carton: 255L x 245W x 315H mm
- Gross Weight: 35.8kg
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use support stands.
Intended Use
For heavy duty use on truck, agriculture, construction, mining, automotive, and marine applications where lifting and lowering is required.
(0 reviews) -
Bottle JacksTQB BRANDS Industrial Squat Bottle Jack – 20,000kg
This powerful, heavy-duty Borum Industrial Hydraulic Bottle Jack with high quality glide-action pressure pump is designed for hard-hitting commercial use, making large loads easy to lift. The lightweight jack is ideal for lifting farm vehicles, heavy-duty machinery, industrial construction equipment and more. High quality, fitted with unique overload protection system and large stable base, this unit is ideal for daily use in a demanding environment.
Fitted with a safety overload valve for extra protection, the safety valve is installed between the pump and high-pressure check valve in the barrel/lift ram assembly. When attempting to raise a load greater than the jack’s capacity, the safety valve opens on each pump stroke and diverts any further oil back to the reservoir thus preventing the raising of the load.
The Borum BR02 series Bottle Jacks can be used horizontally when the pump is positioned above the ram housing or lying on their side with the pump positioned as per the illustrations below. Refer to the owners manual for more information.
Features
- Machined and polished cylinders with die-cut threads provide non-abrasive leak-free, durable performance
- Fabricated from hard-cast steel with heat-treated critical stress areas
- Specially designed internal hydraulics allow the jack to be operated vertically & horizontally
- Unique cross-type forged release valve assures positive load control
- Overload protection built into the hydraulic system ensures user safety
- 3-piece galvanised steel handle allows for easy & compact storage
Specifications
- Safe Working Capacity: 20,000kg
- Minimum Height: 183mm
- Maximum Height: 305mm
- Handle: 3-piece galvanised steel
- Carton: 231L x 182W x 294H mm
- Gross Weight: 9.2kg
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use support stands.
Intended Use
For heavy duty use on truck, agriculture, construction, mining, automotive, and marine applications where lifting and lowering is required.
(0 reviews) -
Stands & RampsTQB BRANDS Jack Stand (Short) 15,000kg
The BORUM Industrial Ultra Heavy Duty Jack Stand is a reinforced pin style jack stand with industrial quality design and support bracing system to sustain heavy loads up to 15,000kg. Adjusts to match the job with a 445mm minimum lift height and 631mm maximum lift height !! Featuring an Ultra Heavy-Duty Industrial design, these tough stands are ideal for construction, farm, truck, bus, earth moving equipment and fleet vehicle maintenance workshop use.
Features
- Manufactured from high-grade steel and built to exacting standards for quality and durability
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy cleanup
- High strength locking pin
- Controlled pin holes for easy height adjustments
- Turned post slide for easy quick adjustments
- Heavy-gauge steel Gusseted uprights prevent distortion or twisting
- Rugged base provides plenty of stability
- Conveniently located carry handle
- Sold individually (not in pairs)
Specifications
- Safe Working Capacity: 15,000kg (individually rated but must be used in pairs for safe usage)
- Maximum Height: 631mm
- Minimum Height: 445mm
- Adjustable increments: 60mm
- Saddle Width: 140mm
- Base Dimensions: 300 x 330mm
- Carton: 470 x 380 x 380mm (Single unit)
- Weight: 23.5kg (each)
Intended Use
Heavy duty fleet and maintenance workshops where a lifted vehicle or trailer is to be supported before conducting servicing or repair work.
NOTE: Sold individually but recommended to be used in pairs
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use jack stands.
(0 reviews) -
Stands & RampsTQB BRANDS Jack Stand (Short) 25,000kg
The BORUM Industrial Ultra Heavy Duty Jack Stand is a reinforced pin style jack stand with industrial quality design and support bracing system to sustain heavy loads up to 25,000kg. Adjusts to match the job with a 415mm minimum lift height and 539mm maximum lift height !! Featuring an Ultra Heavy-Duty Industrial design, these tough stands are ideal for construction, farm, truck, bus, earth moving equipment and fleet vehicle maintenance workshop use.
Features
- Manufactured from high-grade steel and built to exacting standards for quality and durability
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy cleanup
- High strength locking pin
- Controlled pin holes for easy height adjustments
- Turned post slide for easy quick adjustments
- Heavy-gauge steel Gusseted uprights prevent distortion or twisting
- Rugged base provides plenty of stability
- Conveniently located carry handle
- Sold individually (not in pairs)
Specifications
- Safe Working Capacity: 25,000kg (individually rated but must be used in pairs for safe usage)
- Maximum Height: 539mm
- Minimum Height: 415mm
- Adjustable increments: 65mm
- Base Dimensions: 300 x 330mm
- Carton: 430 x 380 x 380mm (Single unit)
- Weight: 24.4kg (each)
Intended Use
Heavy duty fleet and maintenance workshops where a lifted vehicle or trailer is to be supported before conducting servicing or repair work.
NOTE: Sold individually but recommended to be used in pairs
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use jack stands.
(0 reviews) -
Stands & RampsTQB BRANDS Jack Stand 15,000kg
The BORUM Industrial Ultra Heavy Duty Jack Stand is a reinforced pin style jack stand with industrial quality design and support bracing system to sustain heavy loads up to 15,000kg. Adjusts to match the job with a 645mm minimum lift height and 1077mm maximum lift height !! Featuring an Ultra Heavy-Duty Industrial design, these tough stands are ideal for construction, farm, truck, bus, earth moving equipment and fleet vehicle maintenance workshop use.
Features
- Manufactured from high-grade steel and built to exacting standards for quality and durability
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy cleanup
- High strength locking pin
- Controlled pin holes for easy height adjustments
- Turned post slide for easy quick adjustments
- Heavy-gauge steel Gusseted uprights prevent distortion or twisting
- Rugged base provides plenty of stability
- Conveniently located carry handle
- Sold individually (not in pairs)
Specifications
- Safe Working Capacity: 15,000kg (individually rated but must be used in pairs for safe usage)
- Maximum Height: 1077mm
- Minimum Height: 645mm
- Adjustable increments: 70mm
- Saddle Width: 140mm
- Base Dimensions: 460 x 460mm
- Carton: 670 x 380 x 380mm (Single unit)
- Weight: 35.4kg (each)
Intended Use
Heavy duty fleet and maintenance workshops where a lifted vehicle or trailer is to be supported before conducting servicing or repair work.
NOTE: Sold individually but recommended to be used in pairs
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use jack stands.
(0 reviews) -
Stands & RampsTQB BRANDS Jack Stand 25,000kg
The BORUM Industrial Ultra Heavy Duty Jack Stand is a reinforced pin style jack stand with industrial quality design and support bracing system to sustain heavy loads up to 25,000kg. Adjusts to match the job with a 680mm minimum lift height and 968mm maximum lift height !! Featuring an Ultra Heavy-Duty Industrial design, these tough stands are ideal for construction, farm, truck, bus, earth moving equipment and fleet vehicle maintenance workshop use.
Features
- Manufactured from high-grade steel and built to exacting standards for quality and durability
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy cleanup
- High strength locking pin
- Controlled pin holes for easy height adjustments
- Turned post slide for easy quick adjustments
- Heavy-gauge steel Gusseted uprights prevent distortion or twisting
- Rugged base provides plenty of stability
- Conveniently located carry handle
- Sold individually (not in pairs)
Specifications
- Safe Working Capacity: 25,000kg (individually rated but must be used in pairs for safe usage)
- Maximum Height: 968mm
- Minimum Height: 680mm
- Adjustable increments: 70mm
- Base Dimensions: 460 x 460mm
- Carton: 670 x 380 x 380mm (Single unit)
- Weight: 38.5kg (each)
Intended Use
Heavy duty fleet and maintenance workshops where a lifted vehicle or trailer is to be supported before conducting servicing or repair work.
NOTE: Sold individually but recommended to be used in pairs
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use jack stands.
(0 reviews) -
Stands & RampsTQB BRANDS Jack Stands 2,000kg
TradeQuip “Made for the Trade” Adjustable Jack Stands are ideally suited to the professional trade workshop. These ratchet type axle stands are designed with a cast iron support post, tough steel plate welded base and deep saddle for positive location under the vehicle. The cast iron post is equipped with angled teeth and a double-lock safety pin to prevent accidental release of load – the more weight applied, the tighter the post is locked.
We often forget that working with cars and other vehicles can be a dangerous job. It’s easy to get complacent about yours and your employees’ safety when you have years of experience, however accidents can happen to anyone. Although garage and bottle jacks can lift heavy loads they are not designed to keep them there, so when the vehicle has been jacked up it’s crucial that it is placed on a jack stand.
TradeQuip jack stands are excellently designed to ensure you maximum safety. They have wide feet providing a strong base and a unique locking pin so there is no risk of them slipping.
(Previous models include product code/s; 2TJS)
Features
- Constructed of high-grade steel and built to exacting standards for quality and durability
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy cleanup
- Quick action adjustable height mechanism
- Double-lock safety pin design for extra safety and security
- Welded steel frame & cast iron support
- Adjustable height
- Reinforced shaft for added strength stability
- Sold in pairs and only recommended to be used in pairs
Specifications
- Safe Working Capacity: 2,000kg (when used as a pair)
- Minimum Height: 285mm
- Maximum Height: 428mm
- Saddle Area: 85 x 26mm
- Base: 206 x 186mm
- Tested to Australian Standard AS2538:2016
- Carton: 230 x 210 x 360mm
- Weight: 7.2kg
Intended Use
Use in pairs for passenger vehicles, where a lifted vehicle is to be supported before conducting servicing or repair work.
NOTE: Sold in pairs and only recommended to be used in pairs
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use jack stands.
(0 reviews) -
Stands & RampsTQB BRANDS Jack Stands 4,000kg
TradeQuip “Made for the Trade” Adjustable Jack Stands are ideally suited to the professional trade workshop. These ratchet type axle stands are designed with a cast iron support post, tough steel plate welded base and deep saddle for positive location under the vehicle. The cast iron post is equipped with angled teeth and a double-lock safety pin to prevent accidental release of load – the more weight applied, the tighter the post is locked.
We often forget that working with cars and other vehicles can be a dangerous job. It’s easy to get complacent about yours and your employees’ safety when you have years of experience, however accidents can happen to anyone. Although garage and bottle jacks can lift heavy loads they are not designed to keep them there, so when the vehicle has been jacked up it’s crucial that it is placed on a jack stand.
TradeQuip jack stands are excellently designed to ensure you maximum safety. They have wide feet providing a strong base and a unique locking pin so there is no risk of them slipping.
(Previous models include product code/s; 4TJS)
Features
- Constructed of high-grade steel and built to exacting standards for quality and durability
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy cleanup
- Quick action adjustable height mechanism
- Double-lock safety pin design for extra safety and security
- Welded steel frame & cast iron support
- Adjustable height
- Reinforced shaft for added strength stability
- Sold in pairs and only recommended to be used in pairs
Specifications
- Safe Working Capacity: 4,000kg(when used as a pair)
- Minimum Height: 395mm
- Maximum Height: 605mm
- Saddle Area: 98 x 30mm
- Base: 287 x 252mm
- Tested to Australian Standard AS2538:2016
- Carton: 300 x 270 x 460mm
- Weight: 14kg
Intended Use
In pairs for passenger vehicle use, where a lifted vehicle is to be supported before conducting servicing or repair work.
NOTE: Sold in pairs and only recommended to be used in pairs
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use jack stands.
(0 reviews) -
Stands & RampsTQB BRANDS Jack Stands 8,000kg
TradeQuip “Made for the Trade” Adjustable Jack Stands are ideally suited to the professional trade workshop. These ratchet type axle stands are designed with a cast iron support post, tough steel plate welded base and deep saddle for positive location under the vehicle. The cast iron post is equipped with angled teeth to prevent accidental release of load – the more weight applied, the tighter the post is locked.
We often forget that working with cars and other vehicles can be a dangerous job. It’s easy to get complacent about yours and your employees’ safety when you have years of experience, however accidents can happen to anyone. Although garage and bottle jacks can lift heavy loads they are not designed to keep them there, so when the vehicle has been jacked up it’s crucial that it is placed on a jack stand.
TradeQuip jack stands are excellently designed to ensure you maximum safety. They have wide feet providing a strong base.
(Previous models include product code/s; 8TJS)
Features
- Constructed of high-grade steel and built to exacting standards for quality and durability
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy cleanup
- Quick action adjustable height mechanism
- Welded steel frame & cast iron support
- Adjustable height
- Reinforced shaft for added strength stability
- Sold in pairs and only recommended to be used in pairs
Specifications
- Safe Working Capacity: 8,000kg(when used as a pair)
- Minimum Height: 468mm
- Maximum Height: 715mm
- Saddle Size: 125×40(mm)
- Base Size: 324 x 294mm
- Tested to Australian Standard AS2538:2016
- Carton: 350 x 320 x 580mm
- Weight: 30kg
Intended Use
In pairs for passenger vehicle use, where a lifted vehicle is to be supported before conducting servicing or repair work.
NOTE: Sold in pairs and only recommended to be used in pairs
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use jack stands.
(0 reviews) -
Motorcycle LiftersTQB BRANDS Motorcycle Lifter 360kg
This TradeQuip Hydraulic Motorcycle Lifter has a safe working capacity of up to 360kg. Our design features include a full steel ramp, scissor lift technology and convenient mobility with 2 swivel and 2 fixed castors. The base frame is made of quality steel tube and the platform is manufactured of checker plate. Front wheel clamping jaws are step-less (up to 135mm) with stability assured via the crank handle. A quality hydraulic foot pump easily raises and lowers the ATV/Bike load… whilst the automatic safety lock delivers piece of mind safety and security. “Made for the Trade” quality swivel castors provide smooth, stable and convenient mobility. This TradeQuip Hydraulic Motorcycle Lifter comes complete, with an ‘extra-large’ (removable) loading ramp which is also caters for most motorcycles with kickstands. The 2102T Motorcycle Lifters robust and versatile construction, includes a front wheel vice and 4 hook mounts to safely secure any load up to 360kg.
Features- Designed to deliver a safe working lifting device for use with motorcycles, ATV’s, ride-ons, personal watercraft, and snowmobiles
- Two adaptor bars provide additional clearance for high chassis motocross bikes
- Automatic load locking bar for safety
- Quality swivel castors, for easier to positioning and moving around the workshop
- High gloss enamel paint finish
- Does not include tie down straps
Specifications- Safe Working Capacity: 360kg
- Minimum Height: 205mm
- Maximum Height: 780mm
- Platform Length: 1345mm
- Platform Width: 490mm
- Castors:
- Nett Weight: 95kg
- Crate: 1500 x 680 x 310mm
- Gross Weight: 115kg
Intended Use
Lifts motorcycles, ATV’s, ride-on mowers and snowmobiles for servicing, repair work and new vehicle preparation.
(0 reviews) -
Motorcycle LiftersTQB BRANDS Motorcycle Lifter 450kg
This TradeQuip “Made for the Trade” Hydraulic Motorcycle Lifter has a safe working capacity of up to 450 kg. The hydraulic foot pump raises and lowers ATV/Bike while the automatic safety lock makes sure you are safe and secure the entire time. This professional quality 11 gauge steel plate construction makes this hydraulic lifter one of the strongest on the Australian market. The hydraulics system operates via a dual pedal mechanism. One pedal raises the Lifter while the other lowers it. This Lifter is also designed with safety in mind, the features include a wheel vice chock, stop plate, and tie-down strap access ports. It’s diamond plating surface minimises tyres slipping and sliding as you work on your bike. The built-in swivel castors provide convenient mobility and stability when you need it and the lockable bolts ensure its secure when you don’t. The TradeQuip Hydraulic Motorcycle Lifter is complete with an extra-large removable loading ramp which is also suitable for motorcycles with kickstands. The lifters robust and versatile construction, includes in a front wheel vice and 4 hook mounts for securing the load.
Our TradeQuip Hydraulic Motorcycle Lifter is the perfect solution for professional workshops or home mechanics that want to take their maintenance and servicing to the next level. This unit is bigger, stronger, heavier and lifts higher than similar looking bike lifts sold in Australia. Bending down and getting on your hands and knees whilst servicing will be a thing of the past when you can easily lift your bike to an optimal working level. Stability and security will not be an issue, the 45 degree front wheel clamp along with the 4 tie-down points will allow you to prevent any unwanted movement of the bike. Underneath the platform is a professional quality steel frame, an adjustable locking device to prevent accidental lowering and a high quality 500kg rated capacity hydraulic ram. – rated to 450kg at 750mm lift height (weight capacity reduces over this height)
Features:
- Designed to deliver the ideal lift for use with motorcycles, ATV’s, tractors, personal watercraft, and snowmobiles
- Locking bar for safety
- Powder coated structural heavy duty steel construction
- Extra Long Full width loading ramp
- Step-less rate of lowering irrespective of the load
- Oil trap plate for easy drainage
- 2 foot pedals for raising & lowering – for easy hands free operation
- Fitted with 2 position platform locking device to prevent accidental lowering
- Adjustable oversize rubber lined front wheel clamp
- Quality wheels and swivel castors making it easier to position and move around
- Lockdown bolts to prevent unwanted movement during use
- Does not include tie down straps
Specifications
- Safe Working Capacity: 450kg
- Minimum Height: 175mm
- Maximum Height: 750mm
- Platform Length: 2200mm
- Platform Width: 680mm
- Recommended Wheelbase (Axle to axle length): 1600mm
- Maximum OD of Tyre: Should not exceed 18″
- Castor Wheels:
- Nett Weight: 120kg
- Crate: 2265x750x200mm
- Gross Weight: 151kg
Intended Use
Lifts motorcycles, ATV’s, ride-on mowers and snowmobiles for servicing, repair work and new vehicle preparation.
(0 reviews) -
Motorcycle LiftersTQB BRANDS Motorcycle Lifter 500kg
This TradeQuip “Made for the Trade” Motorcycle Lifter Support Stand has a safe working capacity of up to 500 kg. It is designed to elevate motorcycles, ATVs, riding mowers or snowmobiles to make repairs and maintenance easier and more comfortable. Our TradeQuip scissor style support stand is suitable for use either on a motorcycle lift or on the floor. The top of the platform has two sliding “U” shaped supports enabling the lifter to hold motorcycle subframe down tubes. Adjust the height of the scissor mechanism by rotating the screw adjuster manually.
Our TradeQuip Motorcycle Lifter is the perfect accessory lifter for professional workshops that want to take their maintenance and servicing to the next level. This unit is bigger, stronger, heavier and lifts higher than similar looking bike lifts sold in Australia. Trying to get the back wheel off the ground whilst servicing will be a thing of the past when you can easily and safely lift the bikes back wheel off the platform lifter whilst it is up in the air.
Features:
- Designed to deliver the ideal lift for use with motorcycles, ATV’s, tractors, personal watercraft, and snowmobiles
- Lifts back wheel off lift table for tyre/wheel change
- Powder coated structural heavy duty steel construction
- Rotate the lead screw to adjust and raise the lift
- Bolt down lugs to prevent unwanted movement during use
Specifications
- Safe Working Capacity: 500kg
- Minimum Height: 95mm
- Maximum Height: 420mm
- Platform Dimensions: 450x150mm
- Nett Weight: 13.8kg
- Carton: 550x355x110mm
- Gross Weight: 14.7kg
Intended Use
Lifts motorcycles, ATV’s, ride-on mowers and snowmobiles for servicing, repair work and new vehicle preparation.
(0 reviews) -
Motorcycle LiftersTQB BRANDS Motorcycle Lifter Air Actuated 680kg
This TradeQuip Air/Hydraulic Motorcycle Lifter has a safe working capacity of up to 680 kg. The hydraulic foot pump raises and lowers ATV/Bike while the automatic safety lock makes sure you are safe and secure the entire time. The TradeQuip Air/Hydraulic Motorcycle Lifter is complete with an extra large removable loading ramp which is also suitable for motorcycles with kickstands. The lifters robust and versatile construction, includes in a front wheel vice and 2 hook mounts for securing the load.
Features:
- Designed to deliver the ideal lift for use with motorcycles, ATV’s, tractors, personal watercraft, and snowmobiles
- Locking bar for safety
- Powdercoated structural heavy duty steel construction
- Extra Long Full width loading ramp
- Stepless rate of lowering irrespecitve of the load
- Oil trap plate for easy drainage
- 2 foot pedals for raising & lowering – for easy hands free operation
- Fitted with 2 position platform locking device to prevent accidental lowering
- Adjustable oversize rubber lined front wheel clamp
- Lockdown bolts to prevent unwanted movement during use
- Does not include tie down straps
Specifications
- Safe Working Capacity: 680kg
- Minimum Height: 185mm
- Maximum Height: 825mm
- Platform Dimensions: 710mm x 2000mm
- Required Air Pressure: 0.75-0.85Mpa
- Nett Weight: 169kg
- Crate: 2050x845x273mm
- Gross Weight: 210kg
Intended Use
Lifts motorcycles, ATV’s, ride-on mowers and snowmobiles for servicing, repair work and new vehicle preparation.
(0 reviews) -
Motorcycle LiftersTQB BRANDS Motorcycle Lifter Extension Kit
This TradeQuip Air/Hydraulic Motorcycle Lifter Extension Kit includes two lift table width extenders and two ramp extenders. Suits 2103T TradeQuip Motorcycle Lifter
Features:
- Powder coated structural heavy duty steel construction
- Does not include tie down straps
- Suits 2103T TradeQuip Motorcycle Lifter
Specifications
- Safe Working Capacity: 680kg
- Includes 2x 2000x254mm Lift Table Width Extender
- Includes 2x 550x254mm Ramp Width Extender
- Nett Weight: 56kg
- Gross Weight: 60kg
Intended Use
Extends the ramp width when used in conjunction with the 2013T TradeQuip Motorcycle Lifter.
NOTE: 2103T TradeQuip Motorcycle Lifter sold separately
(0 reviews) -
Stands & RampsTQB BRANDS Portable Truck Ramps 20,000kg
The Borum Industrial Portable Truck Ramp Set is designed for maintenance and servicing work on trucks, buses and forklifts allowing easy and safe access to the undercarriage of vehicles. Easy and safe to use with a 700mm incline and 500mm of horizontal deck with safety flange to prevent fork truck from rolling off the deck. These robust ramps weigh just under 80kg each and are fitted with a unique wheel mechanism which raises and lowers for easy moving. These 463mm wide steel truck ramps feature non-skid bases and non-slip traction plates to keep the ramps and their load in place. Handle retracts for out of the way safety and storage. Sold in pairs. (Previous models include product code/s; 1150)
Features
- Portable ramps that adhere to the floor like glue
- Pull the handle out, rotate it up to lock the wheels down for very easy maneuverability around workshop
- Large wheel designs for extra durability
- Long retractable T-handle for easy positioning
- “NON-SKID BASE” – Four ply pads of rubber grips are bolted and glued to the 6mm steel floor plates and they will not skid ahead of the wheels
- Replaces need for a pit or hoist, and at a fraction of the cost and floor space
- Also very popular in Motor Home, Bus and Forklift maintenance workshops
Specifications
- Safe Working Load: 20,000kg (per pair)
- Max Vehicle Tyre Width: 393mm
- Frame Height: 242mm
- Frame Width: 463mm
- Frame Length: 1160mm
- Handle Length: 860mm
- Ramp Angle: 18°
- Sold in pairs
- Carton: 1290 x 500 x 260mm ( x 2 )
- Gross Weight: 160kg (80kg each carton)
Intended Use
For elevating the front or rear of vehicle to access chassis frame and/or components. Particularly useful on vehicles with low profile clearance or ground-effects
(0 reviews) -
Trolleys & CreepersTQB BRANDS Powertrain & Battery Scissor Lifter
The TQ Pro Air/Hydraulic Powertrain & Battery Lifter is a heavy-duty solution specifically engineered for the safe removal and installation of large electric vehicle batteries and complex powertrain assemblies. Built for professional workshop environments, this lifter features a robust air-actuated hydraulic system that provides a smooth, controlled lift, while maintaining a substantial safe working capacity for heavy components. The versatile lifting platform is extendable in length and offers a fore/aft tilt adjustment, ensuring precise alignment with vehicle mounting points during critical maneuvers. Designed for effortless maneuverability, it is equipped with high-grade swivel castors and a long-reach handle, making it an essential tool for technicians working on modern EV and hybrid drivetrain systems.
Features
- 1,100kg safe working capacity
- Extendable platform
- 2° front & rear tilt adjustable
- Heavy-duty 8″ caster wheels
- Includes rubber head accessory kit
- Integrated Auto Safety Lock function
- Maximum height of 2,141 mm (with accessory kit)
Specifications
- Safe working capacity: 1,100kg
- Operating Air Pressure: 100psi
- Control cable length: 2438mm
- Lift table size: 762 mm x 1,524 mm
- Lift table extended size: 762 mm x 1,828 mm
- Overall length: 1,682.7 mm
- Overall width: 774.7 mm
- Lift table Front/Rear tilt: 2 degrees
- Lift table hole size: 3/8-16 unc
- Low height: 586.74mm
- Max lifting height with accessory kit: 2141.22 mm
- Caster wheel diameter: 203.2 mm
- Handle length: 863.6 mm
- Net Weight: 377kg
- Gross Weight: 455kg
Intended Use
For lifting both heavy and light work pieces and workloads. Scissor Lift tables raise, position, and transport workloads and workpieces to minimise risk of injury.
(0 reviews) -
Trolleys & CreepersTQB BRANDS Scissor Lift Workshop Trolley 225KG
The TradeQuip “Made for the Trade” moveable, Hydraulic Scissor Lift Table can position and raise your work piece up to 710mm by simply pumping on the foot pedal to the desired height. Features include a hand release lever to safely lower a heavy piece of work and two locking swivel castors to ensure stability once the scissor lift table is shifted into position. This piece of equipment is ideal for any garage, workshop or parts warehouse dealing with heavy parts such as engine blocks, large cylinder heads, diff housings and transmissions!This “Made for the Trade” 6010T Scissor Lift Table has a 225kg Safe Working Capacity and is fitted with wheels, designed to carry that weight with sealed bearings and polyurethane tyres, to ensure heavy loads can be transported smoothly and precisely, to and from the work area. Manually lift this work table ergonomically via the hydraulic operated foot pump which efficiently elevates the table top reducing strain and fatigue from having to bending over. Easy to elevate with the convenient hydraulic foot pump and easy to lower… via the release lever on the handle to go down in a controlled manner.
In addition, this 6010T scissor lift table can be used as a convenient mobile work bench so you can work at different heights to reduce the risk of back injury. Our manual hydraulic scissor lift table is ergonomically designed to elevate the table to the best height reducing strain and fatigue from bending over for long periods.
This scissor lift is manufactured to withstand busy working environments and can also be used as a convenient and safe mobile work bench, so you can work at different heights to reduce the risk of injury allowing you to focus on the job at hand.
(Previous models include product code; 6006)
Features
- Foot-operated hydraulic pedal keeps your hands free
- Quick release hand lever for easy, controlled hydraulic release
- Heavy duty oil-resistant nonslip rubber mat
- Two locking heavy duty swivel castors
- Conveniently positioned handle for easy manoeuvrability
- Powder coated for extra protection from wear and tear.
- Perfect for moving heavy parts to and from the vehicle
Specifications
- Safe Working Capacity: 225kg
- Maximum Height: 710mm
- Minimum Height: 225mm
- Assembled Dimensions with Handle Raised: 950(L) x 450(W) x 885(H)mm
- Table Size: 708(L) x 450(W)mm
- Wheel Diameter: 125mm
- Carton: 810 x 500 x 260mm
- Nett Weight: 36.3kg
- Gross Weight: 40kg
Intended Use
For lifting both heavy and light work pieces and workloads. Scissor Lift tables raise, position, and transport workloads and workpieces to minimise risk of injury.
(0 reviews) -
Trolleys & CreepersTQB BRANDS Scissor Lift Workshop Trolley 300KG
The TradeQuip “Made for the Trade” moveable, Hydraulic Scissor Lift Table can position and raise your work piece up to 1285mm by simply pumping on the foot pedal to the desired height. Features include a hand release lever to safely lower a heavy piece of work and two locking swivel castors to ensure stability once the scissor lift table is shifted into position. This piece of equipment is ideal for any garage, workshop or parts warehouse dealing with heavy parts such as engine blocks, large cylinder heads, diff housings and transmissions!This “Made for the Trade” 6008T Scissor Lift Table has a 300kg Safe Working Capacity and is fitted with wheels, designed to carry that weight with sealed bearings and polyurethane tyres, to ensure heavy loads can be transported smoothly and precisely, to and from the work area. Manually lift this work table ergonomically via the hydraulic operated foot pump which efficiently elevates the table top reducing strain and fatigue from having to bending over. Easy to elevate with the convenient hydraulic foot pump and easy to lower… via the release lever on the handle to go down in a controlled manner.
In addition, this 6008T scissor lift table can be used as a convenient mobile work bench so you can work at different heights to reduce the risk of back injury. Our manual hydraulic scissor lift table is ergonomically designed to elevate the table to the best height reducing strain and fatigue from bending over for long periods.
This scissor lift is manufactured to withstand busy working environments and can also be used as a convenient and safe mobile work bench, so you can work at different heights to reduce the risk of injury allowing you to focus on the job at hand.
(Previous models include product code; RLSLT300)
Features
- Foot-operated hydraulic pedal keeps your hands free
- Quick release hand lever for easy, controlled hydraulic release
- Heavy duty oil-resistant nonslip rubber mat
- Two locking heavy duty swivel castors
- Conveniently positioned handle for easy manoeuvrability
- Powder coated for extra protection from wear and tear.
- Perfect for moving heavy parts to and from the vehicle
Specifications
- Safe Working Capacity: 300kg
- Maximum Height: 1285mm
- Minimum Height: 350mm
- Assembled Dimensions with Handle Raised: 1140(L) x 515(W) x 995(H)mm
- Table Size: 820(L) x 520(W)mm
- Wheel Diameter: 125mm
- Crate: 950 x 590 x 460mm
- Weight: 105kg
Intended Use
For lifting both heavy and light work pieces and workloads. Scissor Lift tables raise, position, and transport workloads and workpieces to minimise risk of injury.
(0 reviews) -
Trolleys & CreepersTQB BRANDS Scissor Lift Workshop Trolley 450KG
The TradeQuip “Made for the Trade” moveable, Hydraulic Scissor Lift Table can position and raise your work piece up to 875mm by simply pumping on the foot pedal to the desired height. Features include a hand release lever to safely lower a heavy piece of work and two locking swivel castors to ensure stability once the scissor lift table is shifted into position. This piece of equipment is ideal for any garage, workshop or parts warehouse dealing with heavy parts such as engine blocks, large cylinder heads, diff housings and transmissions!This “Made for the Trade” 6003T Scissor Lift Table has a 450kg Safe Working Capacity and is fitted with wheels, designed to carry that weight with sealed bearings and polyurethane tyres, to ensure heavy loads can be transported smoothly and precisely, to and from the work area. Manually lift this work table ergonomically via the hydraulic operated foot pump which efficiently elevates the table top reducing strain and fatigue from having to bending over. Easy to elevate with the convenient hydraulic foot pump and easy to lower… via the release lever on the handle to go down in a controlled manner.
In addition, this 6003T scissor lift table can be used as a convenient mobile work bench so you can work at different heights to reduce the risk of back injury. Our manual hydraulic scissor lift table is ergonomically designed to elevate the table to the best height reducing strain and fatigue from bending over for long periods.
This scissor lift is manufactured to withstand busy working environments and can also be used as a convenient and safe mobile work bench, so you can work at different heights to reduce the risk of injury allowing you to focus on the job at hand.
(Previous models include product code; 6006)
Features
- Foot-operated hydraulic pedal keeps your hands free
- Quick release hand lever for easy, controlled hydraulic release
- Heavy duty oil-resistant nonslip rubber mat
- Two locking heavy duty swivel castors
- Convenient fold down handle
- Powder coated for extra protection from wear and tear.
- Perfect for moving heavy parts to and from the vehicle
Specifications
- Safe Working Capacity: 450kg
- Maximum Height: 875mm
- Minimum Height: 280mm
- Assembled Dimensions with Handle Raised: 1140(L) x 515(W) x 995(H)mm
- Table Size: 810(L) x 500(W)mm
- Wheel Diameter: 125mm
- Carton: 980c560c300mm
- Weight: 74kg
Intended Use
For lifting both heavy and light work pieces and workloads. Scissor Lift tables raise, position, and transport workloads and workpieces to minimise risk of injury.
(0 reviews) -
Trolleys & CreepersTQB BRANDS Scissor Lift Workshop Trolley 500KG
The TradeQuip “Made for the Trade” moveable, Hydraulic Scissor Lift Table can position and raise your work piece up to 865mm by simply pumping on the foot pedal to the desired height. Features include a hand release lever to safely lower a heavy piece of work and two locking swivel castors to ensure stability once the scissor lift table is shifted into position. This piece of equipment is ideal for any garage, workshop or parts warehouse dealing with heavy parts such as engine blocks, large cylinder heads, diff housings and transmissions!This “Made for the Trade” 6009T Scissor Lift Table has a 500kg Safe Working Capacity and is fitted with wheels, designed to carry that weight with sealed bearings and polyurethane tyres, to ensure heavy loads can be transported smoothly and precisely, to and from the work area. Manually lift this work table ergonomically via the hydraulic operated foot pump which efficiently elevates the table top reducing strain and fatigue from having to bending over. Easy to elevate with the convenient hydraulic foot pump and easy to lower… via the release lever on the handle to go down in a controlled manner.
In addition, this 6009T scissor lift table can be used as a convenient mobile work bench so you can work at different heights to reduce the risk of back injury. Our manual hydraulic scissor lift table is ergonomically designed to elevate the table to the best height reducing strain and fatigue from bending over for long periods.
This scissor lift is manufactured to withstand busy working environments and can also be used as a convenient and safe mobile work bench, so you can work at different heights to reduce the risk of injury allowing you to focus on the job at hand.
(Previous models include product code; 6006)
Features
- Foot-operated hydraulic pedal keeps your hands free
- Quick release hand lever for easy, controlled hydraulic release
- Heavy duty oil-resistant nonslip rubber mat
- Two locking heavy duty swivel castors
- Conveniently positioned handle for easy manoeuvrability
- Powder coated for extra protection from wear and tear.
- Perfect for moving heavy parts to and from the vehicle
Specifications
- Safe Working Capacity: 500kg
- Maximum Height: 865mm
- Minimum Height: 265mm
- Assembled Dimensions with Handle Raised: 1100(L) x 520(W) x 880(H)mm
- Table Size: 820(L) x 520(W)mm
- Wheel Diameter: 125mm
- Crate: 915 x 570 x 280mm
- Nett Weight: 63kg
- Gross Weight: 71kg
Intended Use
For lifting both heavy and light work pieces and workloads. Scissor Lift tables raise, position, and transport workloads and workpieces to minimise risk of injury.
(0 reviews) -
Trolleys & CreepersTQB BRANDS Scissor Lift Workshop Trolley 500kg
This TradeQuip “Made for the Trade” moveable, hydraulic scissor lift table can position and raise your work piece up to 1585mm by simply pumping on the foot pedal to the desired height. Features include a hand release lever to safely lower a heavy piece of work and two locking swivel casters to ensure stability once the scissor lift table is shifted into position. This piece of equipment is great for any garage, workshop or parts warehouse dealing with heavy parts!
Manual hydraulic lift table ergonomically designed with a foot pump to elevate the table reducing strain and fatigue from bending over. Easy to use pump to elevate up and release handle for it to go down in a controlled manner.
In addition, this 6007T “High Lift” scissor lift table can be used as a convenient mobile work bench so you can work at different heights to reduce the risk of injury.
This scissor lift is manufactured to withstand day-to-day working environments; allowing you to get on with the job in hand.
The “Made for the Trade” 6007T scissor lift table has a 500kg capacity and is fitted with wheels, designed with sealed bearings and polyurethane tyres, to ensure loads can be transported smoothly and precisely.
Our manual hydraulic scissor lift table is ergonomically designed with a foot pump to elevate the table reducing strain and fatigue from bending over.
Features
- Double Scissor High Lift
- Foot-operated hydraulic pedal keeps your hands free
- Quick release hand lever for easy, controlled hydraulic release
- Two locking heavy duty swivel castors
- All steel construction
- Powder coated for extra protection from wear and tear
- Perfect for moving heavy parts to and from the vehicle
Specifications
- Safe Working Capacity: 500kg
- Maximum Height: 1575mm
- Minimum Height: 440mm
- Table Size: 1010(L) x 520(W)mm
- Wheel Diameter: 150mm
- Dimensions: 1130x520x1260mm
- Nett Weight: 144kg
- Carton: 1140 x 575 x 450mm
- Gross Weight: 157kg
Intended Use
For lifting both heavy and light work pieces and workloads. Scissor Lift tables raise, position, and transport workloads and workpieces to minimise risk of injury.
(0 reviews) -
Stands & RampsTQB BRANDS Support Stand 10,000kg
The BORUM Industrial 10,000kg Heavy Duty Support Stand is a reinforced pin style stand with industrial quality design and support bracing system to sustain heavy loads up to 10,000kg. Adjusts to match the job with a 720mm minimum lift height and 1190mm maximum lift height !! Featuring Heavy-Duty Industrial design, these tough stands are ideal for construction, farm, truck, bus, earth moving equipment and fleet vehicle maintenance workshop use. Big wheeled and larger vehicles like trucks and earthmovers require a strong, stable and tall type of jack stand.
With its 10,000kg lift capacity (each stand), this is definitely a perfect fit in its class. Featuring a very stable 4 leg steel base system made with high-grade pipe steel, that provides plenty of stability and security. Large saddles with a flat top base are designed and a double ear support system, secure any large vehicle’s steel frame underneath and to give confidence that the vehicle load is very stable. Once the multiple pin post adjustment locks in, there’s no vehicle slipping even with the heaviest vehicle. The maximum adjustable height of 1190mm, ensures there are no cramped areas are hard to reach when using this high profile truck support stand.
Features
- Stable 4 legged stability
- Manufactured from high-grade steel and built to exacting standards for quality and durability
- Large saddle with double ear support system
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy cleanup
- High strength locking pin
- Controlled pin holes for easy height adjustments
- Turned post slide for easy quick adjustments
Specifications
- Safe Working Capacity: 10,000kg
- Maximum Height: 1190mm
- Minimum Height: 720mm
- Adjustable Pin Heights: 10
- Locking Pin Dia: 22mm
- Shaft Pin Hole Dia: 23mm
- Saddle Dimensions: 125x75mm (useable area)
- Base Dimensions: 406 x 556mm
- Nett Weight: 23.5kg
- Carton: 450 x 450 x 800mm
- Weight: 26.4kg
Intended Use
For professional heavy duty use on truck, agriculture, construction, mining, mobile home, oil field, automotive, and marine applications, where a lifted vehicle is to be supported before conducting servicing or repair work. Should be used in pairs.
NOTE: Sold individually but recommended to be used in pairs
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use jack stands.
(0 reviews) -
Stands & RampsTQB BRANDS Support Stand 10,000kg Short
The BORUM Industrial 10,000kg Heavy Duty Support Stand is a reinforced pin style stand with industrial quality design and support bracing system to sustain heavy loads up to 10,000kg. Adjusts to match the job with a 580mm minimum lift height and 780mm maximum lift height !! Featuring Heavy-Duty Industrial design, these tough stands are ideal for construction, farm, truck, bus, earth moving equipment and fleet vehicle maintenance workshop use. Big wheeled and larger vehicles like trucks and earthmovers require a strong, stable and tall type of jack stand.
With its 10,000kg lift capacity (each stand), this is definitely a perfect fit in its class. Featuring a very stable 4 leg steel base system made with high-grade pipe steel, that provides plenty of stability and security. Large saddles with a flat top base are designed and a double ear support system, secure any large vehicle’s steel frame underneath and to give confidence that the vehicle load is very stable. Once the multiple pin post adjustment locks in, there’s no vehicle slipping even with the heaviest vehicle. The maximum adjustable height of 1190mm, ensures there are no cramped areas are hard to reach when using this high profile truck support stand.
Features
- Stable 4 legged stability
- Manufactured from high-grade steel and built to exacting standards for quality and durability
- Large saddle with double ear support system
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy cleanup
- High strength locking pin
- Controlled pin holes for easy height adjustments
- Turned post slide for easy quick adjustments
Specifications
- Safe Working Capacity: 10,000kg
- Maximum Height: 780mm
- Minimum Height: 580mm
- Adjustable Pin Heights: 6
- Saddle Dimensions: 100 x 80mm
- Weight: 18kg
Intended Use
For professional heavy duty use on truck, agriculture, construction, mining, mobile home, oil field, automotive, and marine applications, where a lifted vehicle is to be supported before conducting servicing or repair work. Should be used in pairs.
NOTE: Sold individually but recommended to be used in pairs
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use jack stands.
(0 reviews) -
Transmission LiftersTQB BRANDS Transmission Lifter 4X4/SUV/Light Commercial
This TradeQuip “Made for the Trade” 1,000kg Transmission Lifter is designed for passenger car, 4WD & Light commercial transmission installation and removal. It features a universal mounting cradle that provides a 4 way tilt range and a manually operated hydraulic system with smooth hydraulic lift and descent. The hydraulic system also includes a bypass system to prevent over extension and accidental overloading. The sturdy and stable design offers safety and security when removing and installing large and heavy transmissions.
Features:
- Designed for Passenger Car, 4WD & Light Commercial Transmissions
- Base frame constructed of high-grade steel
- 2-Stage hydraulic lift
- High quality large diameter hydraulic cylinder
- Universal 4 way tilt cradle with safety chains
- Lead-free paint finish for a long-lasting finish
- Paint finish is oil, grease and dirt-resistant for easy cleanup
- Heavy-duty steel swivel castors
Specifications:
- Safe Working Capacity: RWD/FWD/AWD/4X4 GVM <3,200KG
- Rated Capacity: 1000kg
- Platform Lift Range: 950-1930mm (Excludes 60mm upright support brackets)
- Lifting Platform Size: 160x145mm (475x465mm Max.)
- Forward Tilt: 11°
- Rearward Tilt: 11°
- Left Tilt: 9°
- Right Tilt: 11°
- Crate: 840 x 570 x 400mm
- Nett Weight: 73.7kg
- Gross Weight: 82.3kg
Intended Use
Designed for the removal, installation and transportation (in the lowered position) of passenger vehicle transmissions that are raised by an in-ground or above-ground lift.
(0 reviews) -
Transmission LiftersTQB BRANDS Transmission Lifter 4×4/SUV/Light Commercial
This TQ Pro “Latest Applied Technologies” 2-Stage 1,000kg Hydraulic Telescopic Transmission Lifter offers a wide range of versatility designed to help increase workshop productivity. Designed for use with passenger, SUV, 4×4 and Light Commercial with GVM of less than 3,500kg. This Transmission Lifter features a universal “oversized” lifting platform that provides a wide 4 way tilt range. The telescopic 2-stage design is ideal for reduced clearance lifts and the high speed foot pedal operation keeps hands free during lowering. The manually operated hydraulic system includes a bypass system to prevent over extension and accidental overloading. The sturdy and stable design features four premium quality ‘braked’ nylon swivel castors for easy maneuverability around the workshop.
Features
- Using CNC technology, the chassis and frame is constructed of superior-grade steel and built to premium standards for professional quality and durability
- High quality large diameter hydraulic steel cylinder with precision tolerances and in-ram bleeding and lubricating mechanism
- Piston-ram is precision machined, treated and polished to minimise wear and extend service life
- Globally sourced premium (twin) O rings with anti-dust ring, reduce wear and substantially increase durability
- Concealed double staged pump core
- Rapid lift without load
- Slow descent with load
- Overload safety valve
- Aviation grade hydraulic fluid
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting and durable finish
- Paint is oil, grease and dirt-resistant for easy cleanup
- Oversize mounting cradle provides a broad 4 way adjustment / tilt range
- Premium quality lockable nylon swivel castors
4 Way Tilting Cradle Offers The Perfect Mounting Angle
The oversize design of the lifting platform design provides a wide fore and aft tilt range to get the load in the perfect position.
Versatility And Portability To Match Your Needs
Positioning this transmission lifter is just a one-person job. The sturdy base includes four premium nylon castors that swivel a full 360°, adding effortless maneuverability. Once your transmission lifter is in place, the smooth, high speed hydraulic system makes easy work of lifting and lowering.
Use It Day In And Day Out
The TQ Pro Telescopic Transmission Lifter is the perfect choice for use with car and light truck transmissions. The base design makes this transmission lifter easy to move whilst maintaining stability under most vehicle hoists, and an oversized lifting platform increases contact area with the load for a sure hold on most transmissions.
Specifications
- Safe Working Capacity: RWD/FWD/AWD/4X4 GVM <3,500kg
- Rated Capacity: 1,000kg
- Platform Lift Range: 960-1905mm (Excludes 60mm upright support brackets)
- 2 Stage Lift Ram travel: 1st=490mm 2nd=510mm
- Lifting Platform Size: 160x145mm (475x465mm Max.)
- Forward Tilt: 11°
- Rearward Tilt: 11°
- Left Tilt: 9°
- Right Tilt: 11°
- Base Dimensions: 610 x 740mm
- Nett Weight: 82.8kg
- Gross Weight: 91.4kg
- Crate: 840 x 570 x 400mm
Intended Use
Designed for the removal, installation and transportation (in the lowered position) of 4WD and light commercial transmissions that are raised by an in-ground or above-ground lift. Not designed for supporting loads.
(0 reviews) -
Transmission LiftersTQB BRANDS Transmission Lifter 4×4/SUV/Light Commercial
This professional TradeQuip “Made for the Trade” 1,000kg Hydraulic Low Profile Transmission Jack is perfect for transmission installation and removal under ramps. Features include smooth, manually operated hydraulic lifting and lowering and a 360° rotating handle for better load positioning. The universal lifting platform provides a wide forward, backward tilt range and side to side lateral adjustment. This transmission jack makes transmission removal and replacement easy and safe. Featuring durable rear swivel castors for mobility, this tough transmission jack is also formed and welded with extra strong steel plates for ultimate durability. (Previous models include product code/s; 1000KGTROTJ, 2081T)
Features
- The adjustable lifting platform can be tilted forward, backward for alignment of transmission bolt patterns and pins
- Lateral lifting platform adjustment improves efficiency
- Hydraulic system is protected from overload damage
- Safety load-restraining chain is vital for raising and lowering safety
- Four (4) swivel castors allow easy movement and positioning of transmission jack
- Rugged heavy duty steel wheels with full swivel ball bearing castors
- User-friendly 360° rotating pumping handle for maximum multi-directional operation
Specifications
- Safe Working Capacity: RWD/FWD/AWD/4X4 GVM <3,500kg
- Rated Capacity: 1,000kg
- Maximum Height: 725mm
- Minimum Height: 205mm
- Lifting Platform Size: 340x200mm
- Tilt Forward: 70°
- Tilt Backward: 15°
- Lifting Platform Lateral Adjustment: 90mm
- Chassis: 850(L)x490(W)x305(H)mm
- Nett Weight: 54kg
- Carton 910 x 520 x 260mm
- Gross Weight: 59.5kg
Intended Use
For professional removal and installation of passenger car, 4WD and light commercial transmissions or differentials.
(0 reviews) -
Transmission LiftersTQB BRANDS Transmission Lifter Commercial
This Borum Industrial 2,000kg Hydraulic Truck Transmission Jack is perfect for earthmoving equipment and truck transmission installation and removal. Features a fully adjustable wide tilt lifting platform, smooth, manually operated hydraulic lifting and lowering and a 360° rotating handle for better load positioning.
This Super Heavy Duty Borum Brute of a Transmission Jack is specifically built to handle removal, transport and installation of transmissions, transfer cases or differentials on heavy duty trucks, buses, agricultural and construction equipment. It is fully adjustable lifting platform with wide adjustment and maximum tilt for easier alignment fitted with safety chains, this monster can handle all big transmission lifts. The handle is a long 850mm and conveniently pivots 360° around pump and the rugged industrial grade 100mm castors provide easy manoeuvrability. A safety overload bypass system prevents hydraulic damage and handy side trays provide convenient storage for small tools and parts. (Previous models include product code/s; 2601)
Features
- Designed for lifting & lowering heavy vehicle transmissions
- Frame is constructed of industrial-grade steel and built to exacting standards for quality and durability
- The adjustable lifting platform can be tilted forward, backward and side to side for optimum alignment of transmission bolt patterns and pins
- High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to lift load
- Industrial strength hydraulic system is protected from overload damage
- Filled with industrial grade hydraulic fluid
- Rugged heavy industrial steel wheels and full swivel ball bearing castors
- User-friendly 360° rotating pumping handle for maximum multi-directional operation
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy cleanup
- Universal mounting lifting platform provides a wide fore and aft tilt range
- Includes heavy safety chain load-restraint for raising and lowering safety
Specifications
- Safe Working Capacity: 2,000kg
- 2 Way Tilt: 30° Fore – 30° Aft
- Minimum Height: 210mm
- Maximum Height: 900mm
- Minimum Lifting Platform Dimension: 385 x 470mm
- Maximum Lifting Platform Dimension: 570 x 470mm
- Swivel Castor Wheel Dia: 100mm
- Handle Length: 850mm
- Chassis Dimensions: 1160 x 685mm
- Nett Weight: 130kg
- Crate: 1220 x 720 x 300
- Gross Weight: 140kg
Intended Use
For professional heavy duty use on truck, agriculture, construction and mining applications for the removal and installation of heavy transmissions or differentials.
(0 reviews) -
Transmission LiftersTQB BRANDS Transmission Lifter Passenger Vehicle
This TradeQuip “Made for the Trade” 500kg Transmission Lifter is designed for passenger Car transmissions. Features a universal mounting cradle that provides a 2 way tilt range and a manually operated hydraulic system with smooth hydraulic lift and descent. The hydraulic system also includes a bypass system to prevent over extension and accidental overloading. The sturdy and stable design offers safety and security when removing and installing large and heavy transmissions.
Features
- Designed Designed for passenger car transmissions
- Base frame constructed of high-grade steel
- 2-Stage hydraulic lift
- High quality large diameter hydraulic cylinder
- Universal 2 way tilt cradle with safety chains
- Lead-free paint finish for a long-lasting finish
- Paint finish is oil, grease and dirt-resistant for easy cleanup
- Heavy-duty steel swivel castors
Specifications
- Safe Working Capacity: RWD/FWD/AWD GVM <2,300KG
- Rated Capacity: 500kg
- Working Height: 895mm – 1875mm
- Lifting Platform Size: 340mm x 240mm
- Lifting Platform Bracket Ranges ID: 420mm x 250mm to 420mm x 435mm
- Tilt Angle: Left 7°
- Tilt Angle: Right 15°
- Weight: 73kg
Intended Use
Designed for the removal, installation and transportation (in the lowered position) of passenger vehicle transmissions that are raised by an in-ground or above-ground lift.
(0 reviews) -
Transmission LiftersTQB BRANDS Transmission Lifter Passenger Vehicle
This TradeQuip “Made for the Trade” 2-Stage hydraulic Telescopic Transmission Lifter offers a wide range of versatility designed to help increase workshop productivity. Rated to safely work with Transmissions from vehicles with a GVM of less than 2,000kgs, the universal mounting head provides a wide fore and aft tilt range. The foot operated manual hydraulic system has a smooth hydraulic lift and descent. The foot operated pump with a foot release valve lever provides a steady and mechanically controlled safe descending speed.
Features:
- Designed for lifting & lowering passenger car transmissions
- Durable steel frame
- Adjustable lifting platform for quick adjustment for most pan configurations
- Load control chains hold transmission in place
- 4 swivel castors provide stability and easy manoeuvrability
Specifications:
- Safe Working Capacity: RWD/FWD GVM <2,000kg
- Rated Capacity: 500kg
- Maximum Height: 1768mm
- Minimum Height: 820mm
- Lifting Platform: 250 x 362mm
- Forward Tilt: 9˚
- Rearward Tilt: 17˚
- Nett Weight: 52kg
- Carton: 800 x 510 x 320mm
- Gross Weight: 59kg
Intended Use
Designed for the removal, installation and transportation (in the lowered position) of passenger vehicle transmissions that are raised by an in-ground or above-ground lift.
(0 reviews) -
Transmission LiftersTQB BRANDS Transmission Lifter Passenger Vehicle
This 500kg capacity“Made for the Trade” TradeQuip hydraulic Telescopic Transmission Lifter has a 4 way tilt transmission lifting platform with adjustable load support arms to fit most passenger vehicle transmission pan flanges. The foot-operated quick lift pump frees up operator’s hands when positioning for lift and the hand operated lower lever provides safety with its extra slow lower control.
Features
- Designed for lifting & lowering passenger car transmissions
- 2 Stage hydraulic ram
- Rugged steel wheels and full swivel ball bearing castors for easy movement
- Wide base for stability and balance
- Adjustable lifting platform for quick adjustment for most pan configurations
- 4way tilt lifting platform
- High polished chrome-plated rams provides smooth operation
- Unique hand release lever provides extra slow control safety when lowering
- Foot operated fast action pump & release valve
- Safety designed lifting platform with corner brackets
- Includes safety chains
Specifications
Safe Working Capacity: RWD/FWD/AWD GVM <2,500kg- Rated Capacity: 500kg
- Minimum Height: 855mm
- Maximum Height: 1760mm
- Lifting Platform: 360x276mm
- Forward Tilt: 23°
- Backward Tilt: 16°
- Lateral Tilt: 7°
- Base Dimensions: 690 x 780mm
- Nett Weight: 61kg
- Carton: 550 x 270 x 780mm
- Gross Weight: 68kg
Intended Use
Designed for the removal, installation and transportation (in the lowered position) of passenger vehicle transmissions that are raised by an in-ground or above-ground lift.
(0 reviews) -
Transmission LiftersTQB BRANDS Transmission Lifter Passenger Vehicle
This TQ Pro “Latest Applied Technologies” 2-Stage Hydraulic Telescopic Transmission Lifter offers a wide range of versatility designed to help increase workshop productivity. Designed for lifting passenger car transmissions, the universal mounting lifting platform provides a wide four way tilt range and the wide base is enhanced by four premium nylon swivel castors for safer maneuvering around the workshop. The convenient rapid lift without load and slow descent with load is controlled via the foot operated pump and release valve to keep the mechanic’s hands free during use. The height and lifting platform adjustability of this telescopic Transmission Lifter makes it great for any transmission installation or removal. CNC technology, ensures the chassis and frame constructed of superior-grade steel is manufactured to exacting standards that meet TQ Pro expectations for professional quality and durability.
Features
- Designed for lifting & lowering passenger car transmissions
- Using CNC technology, the chassis and frame is constructed of superior-grade steel and built to exacting standards for professional quality and durability
- High quality large diameter hydraulic steel cylinder with precision tolerances and in-ram bleeding and lubricating mechanism
- Piston-ram is treated and polished to minimise wear and extend service life
- Globally sourced premium quality (doubled) O rings with anti-dust ring, reduce wear and substantially increase durability
- Concealed double staged pump core
- Rapid lift without load
- Slow descent with load
- Overload safety valve
- Aviation grade hydraulic fluid
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting and durable finish
- Paint is oil, grease and dirt-resistant for easy cleanup
- Oversize lifting platform provides a broad 4 way adjustment / tilt range
- Premium nylon swivel castors
4 Way Tilting Cradle Offers The Perfect Mounting Angle
The oversize design of the lifting platform design provides a wide fore and aft tilt range to get the load in the perfect position.
Versatility And Portability To Match Your Needs
Positioning this transmission lifter is just a one-person job. The sturdy base includes four premium nylon castors that swivel a full 360°, adding effortless maneuverability. Once your transmission lifter is in place, the smooth, high speed hydraulic system makes easy work of lifting and lowering.
Use It Day In And Day Out
The TQ Pro Telescopic Transmission Lifter is the perfect choice for lifting passenger car transmissions. The base design makes this transmission lifter easy to move whilst maintaining stability under most vehicle hoists, and an oversized cradle increases contact area with the load for a sure hold on most transmissions.
Specifications
- Safe Working Capacity: RWD/FWD/AWD GVM <2,500kg
- Rated Capacity: 500kg
- Platform Lift Range: 955-1960mm (Excludes 60mm upright support brackets)
- 2 Stage Lift Ram travel: 1st=490mm 2nd=510mm
- Lifting Platform Size: 160x145mm (475x465mm Max.)
- Forward Tilt: 11°
- Rearward Tilt: 11°
- Left Tilt: 9°
- Right Tilt: 11°
- Base Dimensions: 610 x 740mm
- Nett Weight: 78.9kg
- Crate: 840 x 570 x 400mm
- Gross Weight: 87.5kg
Intended Use
Designed for the removal, installation and transportation (in the lowered position) of passenger vehicle transmissions that are raised by an in-ground or above-ground lift.
(0 reviews) -
Transmission LiftersTQB BRANDS Transmission Saddle Upgrade
This TQ Pro “Latest Applied Technologies” Transmission Saddle Upgrade offers a wide range of versatility designed to help increase workshop productivity. This Transmission Lifter saddle upgrade features a universal “oversized” lifting platform that provides a wide 4 way tilt range. The sturdy and stable design features premium quality components for a longer working life.
Features
- The saddle frame is constructed of superior-grade steel and built to premium standards for professional quality and durability
- The enlarged threaded rods paired with cantilevered handles allow for faster adjustments over standard saddle design resulting in higher efficiencies
- The four ratcheting securing pins are easily and quickly adjustable making transmission lifting safer & more secure
- Two tie-down straps included to safely secure the transmission to the saddle
- Four rounded tie-down points and holes in securing pins allow for added level of customisation to secure the load
- One removable saddle pin allows for accommodation of longer gearboxes
- Compatible with and for use on selected TQB Brands Transmission Lifters Only.
Transmission Saddle Upgrade Only Available For Purchase To Upgrade Existing TQB Brands Transmission Lifter Saddle
TRANSMISSION LIFTER SHOWN IN IMAGES SOLD SEPARATELY
4 Way Tilting Cradle Offers The Perfect Mounting Angle
The oversize design of the lifting platform design provides a wide fore and aft tilt range to get the load in the perfect position.
Use It Day In And Day Out
The TQ Pro Transmission Lifter Saddle Upgrade is the perfect choice for use with a wide variety of vehicle transmissions. The design makes this transmission lifter saddle easy to make adjustments whilst maintaining stability under most vehicle hoists, and an oversized saddle platform increases contact area with the load for a sure hold on most transmissions.
Specifications
- Fits Following TQB Brands Models: PROTL1000; PROTL500; 2063T; 2022T
- Transmission Lifter Shown In Images Sold Separately
- Rated Maximum Capacity: 1,000kg (See your transmission lifter’s capacity)
- Lifting Platform Size: 160x145mm (475x465mm Max.)
- Forward Tilt: 11°
- Rearward Tilt: 11°
- Left Tilt: 9°
- Right Tilt: 11°
- Nett Weight: 19kg
- Carton: 360 x 240 x 370mm
- Gross Weight: 22kg
Intended Use
Designed for the removal, installation and transportation (in the lowered position) of vehicle transmissions that are raised by an in-ground or above-ground lift. Not designed for supporting loads.
(0 reviews) -
Garage JacksTQB BRANDS Truck Jack Air Actuated 2-Stage 25,000kg
The BORUM “Industrial Quality” Commercial Jacks are made to TQB Brands specification using quality components that are built to exacting standards through CNC machining and Robotic Welding. The result is top industrial performance and reliability. BORUM “Industrial Quality” Commercial Jacks are the perfect choice for a wide variety of uses. These Commercial Jacks are carefully constructed from the highest grades of rugged steel. The super strong hydraulic pump utilises wear-resistant American Made XTP double sealing ring technology. Only the finest quality of Hydraulic Oil is used that has been tested from -25°C – 60°C.
Use these workhorses with a 145–175psi rated air pressure supply to lighten the load and provide the fast, strong lifting power you need. With several lifting options as well as included saddle adaptors…the wide range of BORUM Commercial Jacks will suit most desired applications from agriculture to mining, earth-moving to passenger transport as well as aviation and military.
The BTJ1025TA quickly and easily manages a hefty 25,000kg in the first stage lift position and 10,000kg at the higher 2nd stage extension. This Air Actuated Commercial Jack is designed for heavy duty commercial use and features a long reach “T” handle and large rubber wheels for smooth manoeuvring around the workshop. As always with BORUM, safety is just as important as industrial standard quality, so all BORUM Truck Jacks have a built-in safety valve to prevent overloading and keep the operator safe. Additional safety feature includes a Self-Return lowering and lifting switch to ensure complete control during operation. With a low-profile minimum height of 185mm this jack is ideal for low ground-clearance vehicles and a high lift maximum of 497mm (includes additional lifting saddles), this BORUM Air Actuated Jack is a very versatile heavy-lifter suitable for most workshops.
Features
- Seals made in America
- Double Sealing Function using XTP Industry Sealing
- Telescopic air actuation lift (air-hydraulic pump)
- Long T-handle lets you easily position your jack under vehicle
- Self-Returning Lowering and Lifting Switch
- Internal and External Cylinders hard chromed
- High manoeuvrability & deep reach under vehicles
- 2 extension adaptors / saddle plates
- Large rubber wheels
- All adaptors can be properly stored for transport on each side of the jack
Specifications
- First Stage: 25,000kg Safe Working Capacity
- Second Stage: 10,000kg Safe Working Capacity
- First Stage Hydraulic Lift: 97mm
- Second Stage Hydraulic Lift: 95mm
- Minimum Height: 185mm
- Maximum Height: 497mm
- Adaptors: 45mm and 75mm
- Handle Length: 1380mm
- Operating Air Pressure: 145-175psi
- Chassis: 770x282x185mm
- Nett Weight: 53kg
Intended Use
For professional heavy duty use on truck, agriculture, construction, mining, automotive, and marine applications where lifting and lowering is required.
(0 reviews)