Workshop Tools
Showing 289–324 of 962 results
-
GeneratorsITM 6.8KVA Generator Petrol 5500W Peak Electric Start
Features
All ITM generators are equipped with a reliable AVR (automatic voltage regulator) alternator utilising advanced electronic technology to provide a very pure energy supply with a THD (total harmonic distortion) of <5%. This clean and pure output means they are suitable to power even the most delicate electronic devices.- Powerful 4 Stroke OHV engines
- Low Oil Sensor
- Digital Multimeter Display
- Large Capacity Fuel Tanks
- 2 Year Trade Warranty
Specifications
- Engine HP: 13HP
- KVA: 6.8
- Max Watts: 5,500
- Rated Watts: 5,000
- Noise @ 7m Full Load: 78dB
- Outlets: 2 x 15A
- Fuel Tank: 25L
- Running Time – 50% Load: 13 hours
- Starting System: Electric
- Handle & Wheel Kit: Yes
- Frame Dimensions: 69.5cm Long x 54.5cm Wide x 56.5cm High
- Net Weight: 81Kg
(0 reviews) -
GeneratorsITM 7.5KVA Generator Petrol 6000W Peak with Honda GX390 Engine
ITM GX Series generators are powered by high-quality, reliable Honda GX Series 4-stroke engines, ensuring consistent performance and durability for professional use. Equipped with advanced AVR (Automatic Voltage Regulator) technology, these generators provide a clean and stable power supply.
Built to meet the demands of modern tradespeople, these generators feature:
- Powerful 4-stroke OHV engines for dependable power output.
- IP66-rated power outlets for superior protection in tough environments.
- RCD (Residual Current Device) for enhanced electrical safety.
- Low oil sensor to protect the engine from damage.
For peace of mind, every generator comes with:
- 2-year trade warranty.
- 3-year Honda engine warranty.
Whether you’re on a busy construction site or managing a large property, ITM GX Series generators offer the rugged dependability professionals need.
Specifications
7.5KVA 13HP GENERATOR- Max Watts: 6000
- Rated Watts: 5500
- Outlets: 2 x IP66 15A
- Engine Model: GX390
- Engine HP: 13hp
- Noise @ 7m Full Load: 78dB
- Fuel Tank: 25L
- Running Time: 13 Hours
- Starting Method: Recoil
- Handle & Wheel Kit: Yes
- Net Weight: 80kg
(0 reviews) -
GeneratorsITM 8.1KVA Generator Petrol 6500W Peak Electric Start
Features
All ITM generators are equipped with a reliable AVR (automatic voltage regulator) alternator utilising advanced electronic technology to provide a very pure energy supply with a THD (total harmonic distortion) of <5%. This clean and pure output means they are suitable to power even the most delicate electronic devices.- Powerful 4 Stroke OHV engines
- Low Oil Sensor
- Digital Multimeter Display
- Large Capacity Fuel Tanks
- 2 Year Trade Warranty
Specifications
- Engine HP: 15HP
- KVA: 8.1
- Max Watts: 6,500
- Rated Watts: 6,000
- Noise @ 7m Full Load: 79dB
- Outlets: 2 x 15A
- Fuel Tank: 25L
- Running Time – 50% Load: 12 hours
- Starting System: Electric
- Handle & Wheel Kit: Yes
- Frame Dimensions: 69.5cm Long x 54.5cm Wide x 56.5cm High
- Net Weight: 85Kg
(0 reviews) -
GeneratorsITM 8.1KVA Generator Petrol Construction 3500W Peak Electric Start with Remote
All ITM generators are equipped with a reliable AVR (automatic voltage regulator) alternator utilising advanced electronic technology to provide a very pure energy supply with a THD (total harmonic distortion) of <5%. This clean and pure output means they are suitable to power even the most delicate electronic devices.- Powerful 4 Stroke OHV engines
- Low Oil Sensor
- Digital Multimeter Display
- Large Capacity Fuel Tanks
- 2 Year Trade Warranty
The Construction Series models have a simple push button electric start (battery included) with a convenient remote control which is perfect for the large property or worksite where the generator may not be close to the tool being powered.
Complete with a heavy duty handle and wheel kit, IP66 rated power outlets and RCD (Residual Current Device.), the construction series gens are perfect for the professional tradesman needing a tough yet reliable source of power.
Specifications
- Engine HP: 15HP
- KVA: 8.1
- Max Watts: 6,500
- Rated Watts: 6,000
- Noise @ 7m Full Load: 79dB
- Outlets: 2 x IP66 15A
- Fuel Tank: 25L
- Running Time – 50% Load: 12 hours
- Starting System: Electric w/ Remote
- Handle & Wheel Kit: Yes
- Frame Dimensions: 69.5cm Long x 54.5cm Wide x 56.5cm High
- Net Weight: 88Kg
(0 reviews) -
Magnetic Base Drill AccessoriesITM Axial Float Tapping Heads
Protection against tap breakage ensured by an ultra sensitive and smooth multi-position operating ball-clutch.
Forward and reverse ball drive design transmits rotational power to the tap and disengages smoothly and silently.
Axial float ensures smooth tapping and better thread profile.
Cushioned drive incorporating compression and extension, eliminates the possibility of cross threading during the tapping process, and ensures clean and accurate threads.
A planetary gear reversing mechanism transmits smooth positive reverse to the tap retraction and it retracts 75% faster than it enters.
Accurate depth control by means of its precise neutral mechanism(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BandsawsITM Bandsaw, 170mm Cap, Swivel Head, 1 Speed 240v 1ph, Hyd Down Feed
Features
- Swivel head enables from 0° to 60° mitre cuts.
- Dual mode operation.
– Trigger switch with manual down feed for small quick cuts.
– Control panel with fully adjustable hydraulic down feed & automatic shut-off at end of cut, for cutting larger material. - Incorporated recirculating coolant system.
- Adjustable material stop for repetitive production.
- Safety emergency stop switch.
- 12 months warranty.
- Comes complete with stand & blade.
- Optional brass chip brush & blade tension gauge.
- Made in Taiwan.
Specifications
Motor 1hp Single Phase (240V) Blade Speed Single Speed 80 mpm Blade Size 19mm x 0.9mm x 2110mm Bed Height 895mm Weight 156kg Cutting Capacity Cutting Angle Round Square Rectangle 90° 170mm 170mm 210 x 100mm 45° Right 120mm 110mm  60° Right 70mm 60mm  (0 reviews) -
Bandsaws
ITM Bandsaw, 170mm Cap, Swivel Head, 2 Speed 415v 3ph, Hyd Down Feed
Features
- Swivel head enables from 0° to 60° mitre cuts.
- Dual mode operation.
– Trigger switch with manual down feed for small quick cuts.
– Control panel with fully adjustable hydraulic down feed & automatic shut-off at end of cut, for cutting larger material. - Incorporated recirculating coolant system.
- Adjustable material stop for repetitive production.
- Safety emergency stop switch.
- 12 months warranty.
- Comes complete with stand & blade.
- Optional brass chip brush & blade tension gauge.
- Made in Taiwan.
Specifications
Motor 1hp Three Phase (415V) Blade Speed 2 Speed 40 / 80 mpm Blade Size 19mm x 0.9mm x 2110mm Bed Height 895mm Weight 156kg Cutting Capacity Cutting Angle Round Square Rectangle 90° 170mm 170mm 210 x 100mm 45° Right 120mm 110mm  60° Right 70mm 60mm  (0 reviews) -
BandsawsITM Bandsaw, 170mm Cap, Swivel Head, Variable Speed 240v 1ph, Hyd Down Feed
Features
UNIQUE WG SERIES FEATURES:- Variable speed
- Control panel at front of saw
- Swivel head lock lever at front of saw
STANDARD FEATURES:
- 1 Way swivel head 0° to 60°
- Dual mode operation
- Manual trigger switch, or
- Control panel with hydraulic downfeed
- Industrial quality made in Taiwan
Specifications
Motor 1hp Single Phase (240V) Blade Speed Variable 20-85 mpm Blade Size 19mm x 0.9mm x 2110mm Weight 150kg Cutting Capacity Rectangular 90° 210 x 100mm Square 90° 170 x 170mm Square 45° 110 x 110mm (0 reviews) -
BandsawsITM Bandsaw, 180mm Cap, 4 Speed, 240v 1ph, Horizontal & Vertical Cut
Features
- Horizontal & vertical cutting bandsaw.
- Quick positioning swivel vice enables cuts from 0° to 45°.
- Fully adjustable hydraulic down feed with separate on/off valve & automatic shut-off at end of cut.
- Incorporated recirculating coolant system.
- Non-voltage return ON/OFF switch & emergency stop switch.
- 4 Blade speeds allows precise cutting of different materials.
- Brass chip brush to help extend blade life.
- Adjustable material stop for repetitive production.
- Fitted on base with wheels for easy manoeuvring.
- 12 months warranty.
- Comes complete with blade.
- Made in Taiwan.
Specifications
Motor 1hp Single Phase (240V) Blade Speed 4 Speed 22 / 33 / 45 / 65mpm Blade Size 19mm x 0.9mm x 2360mm Bed Height 572mm Weight 130kg Cutting Capacity Cutting Angle Round Square Rectangle 90° 180mm 180mm 300 x 180mm 45° Right 110mm 110mm 120 x 115mm (0 reviews) -
BandsawsITM Bandsaw, 220mm Cap, Swivel Head, 1 Speed 240v 1ph, Hyd Down Feed
Features
- Swivel head enables from 0° to 60° mitre cuts.
- Dual mode operation.
– Trigger switch with manual down feed for small quick cuts.
– Control panel with fully adjustable hydraulic down feed & automatic shut-off at end of cut, for cutting larger material. - Incorporated recirculating coolant system.
- Brass chip brush to help prevent blade breakage.
- Adjustable material stop for repetitive production.
- Safety emergency stop switch.
- 12 months warranty.
- Comes complete with stand & blade.
- Optional blade tension gauge.
- Made in Taiwan.
Specifications
Motor 1.5hp Single Phase (240V) Blade Speed Single Speed 72 mpm Blade Size 27mm x 0.9mm x 2460mm Bed Height 840mm Weight 216kg Cutting Capacity Cutting Angle Round Square Rectangle 90° 220mm 215mm 260 x 110mm 45° Right 150mm 145mm 155 x 110mm 60° Right 90mm 85mm 95 x 80mm (0 reviews) -
Bandsaws
ITM Bandsaw, 220mm Cap, Swivel Head, 2 Speed 415v 3ph, Hyd Down Feed
Features
- Swivel head enables from 0° to 60° mitre cuts.
- Dual mode operation.
– Trigger switch with manual down feed for small quick cuts.
– Control panel with fully adjustable hydraulic down feed & automatic shut-off at end of cut, for cutting larger material. - Incorporated recirculating coolant system.
- Brass chip brush to help prevent blade breakage.
- Adjustable material stop for repetitive production.
- Safety emergency stop switch.
- 12 months warranty.
- Comes complete with stand & blade.
- Optional blade tension gauge.
- Made in Taiwan.
Specifications
Motor 1.5hp Three Phase (415V) Blade Speed 2 Speed 36 / 72 mpm Blade Size 27mm x 0.9mm x 2460mm Bed Height 840mm Weight 216kg Cutting Capacity Cutting Angle Round Square Rectangle 90° 220mm 215mm 260 x 110mm 45° Right 150mm 145mm 155 x 110mm 60° Right 90mm 85mm 95 x 80mm (0 reviews) -
BandsawsITM Bandsaw, 220mm Cap, Swivel Head, Variable Speed 240v 1ph, Hyd Down Feed
Features
UNIQUE WG SERIES FEATURES:- Variable speed
- Control panel at front of saw
- Swivel head lock lever at front of saw
STANDARD FEATURES:
- 1 Way swivel head 0° to 60°
- Dual mode operation
- Manual trigger switch, or
- Control panel with hydraulic downfeed
- Industrial quality made in Taiwan
Specifications
Motor 1.5hp Single Phase (240V) Blade Speed Variable 20-85 mpm Blade Size 27mm x 0.9mm x 2460mm Weight 195kg Cutting Capacity Rectangular 90° 210 x 140mm Square 90° 215 x 215mm Square 45° 150 x 150mm (0 reviews) -
BandsawsITM Bandsaw, 227mm Cap, Swivel Head, Dual Mitre, 1 Speed 240v 1ph, Hyd Down Feed
Features
- 2-way swivel head enables from 0° to 60° mitre cuts.
- Dual mode operation.
– Trigger switch with manual down feed for small quick cuts.
– Control panel with fully adjustable hydraulic down feed & automatic shut-off at end of cut, for cutting larger material. - Dual direction heavy-duty vice.
- Incorporated recirculating coolant system.
- Brass chip brush to help prevent blade breakage.
- Adjustable material stop for repetitive production.
- Safety emergency stop switch.
- 12 months warranty.
- Comes complete with stand & blade.
- Optional blade tension gauge.
- Made in Taiwan.
Specifications
Motor 1.5hp Single Phase (240V) Blade Speed Single Speed 72 mpm Blade Size 27mm x 0.9mm x 2460mm Bed Height 900mm Weight 285kg Cutting Capacity Cutting Angle Round Square Rectangle 90° 220mm 215mm 260 x 105mm 45° Right 150mm 145mm 155 x 70mm 60° Right 90mm 85mm 90 x 80mm 45° Left 135mm 110mm 160 x 45mm (0 reviews) -
Bandsaws
ITM Bandsaw, 227mm Cap, Swivel Head, Dual Mitre, 2 Speed 415v 3ph, Hyd Down Feed
Features
- 2-way swivel head enables from 0° to 60° mitre cuts.
- Dual mode operation.
– Trigger switch with manual down feed for small quick cuts.
– Control panel with fully adjustable hydraulic down feed & automatic shut-off at end of cut, for cutting larger material. - Dual direction heavy-duty vice.
- Incorporated recirculating coolant system.
- Brass chip brush to help prevent blade breakage.
- Adjustable material stop for repetitive production.
- Safety emergency stop switch.
- 12 months warranty.
- Comes complete with stand & blade.
- Optional blade tension gauge.
- Made in Taiwan.
Specifications
Motor 1.5hp Three Phase (415V) Blade Speed 2 Speed 36 / 72 mpm Blade Size 27mm x 0.9mm x 2460mm Bed Height 900mm Weight 285kg Cutting Capacity Cutting Angle Round Square Rectangle 90° 220mm 215mm 260 x 105mm 45° Right 150mm 145mm 155 x 70mm 60° Right 90mm 85mm 90 x 80mm 45° Left 135mm 110mm 160 x 45mm (0 reviews) -
BandsawsITM Bandsaw, 240mm Cap, Swivel Head, Dual Mitre, 2 Speed 415v 3ph, Hyd Down Feed
Features
- 2-way swivel head enables from 0° to 60° mitre cuts.
- Dual mode operation.
– Trigger switch with manual down feed for small quick cuts.
– Control panel with fully adjustable hydraulic down feed & automatic shut-off at end of cut, for cutting larger material. - Variable speed motor for cutting a wide range of materials.
- Dual direction heavy-duty vice.
- Hydraulic blade tension gauge.
- Incorporated recirculating coolant system.
- Brass chip brush to help prevent blade breakage.
- Adjustable material stop for repetitive production.
- Safety emergency stop switch.
- 12 months warranty.
- Comes complete with stand & blade.
- Made in Taiwan.
Specifications
Motor 2hp Three Phase (415V) Blade Speed 2 Speed 36 / 72 mpm Blade Size 27mm x 0.9mm x 2725mm Bed Height 895mm Weight 302kg Cutting Capacity Cutting Angle Round Square Rectangle 90° 240mm 235mm 310 x 165mm 45° Right 195mm 185mm 195 x 130mm 60° Right 120mm 85mm 120 x 90mm 45° Left 165mm 140mm 195 x 60mm (0 reviews) -
BandsawsITM Bandsaw, 260mm Cap, Swivel Head, Dual Mitre, 2 Speed 415v 3ph, Hyd Down Feed
Features
- 2-way swivel head enables from 0° to 60° mitre cuts.
- Dual mode operation.
– Trigger switch with manual down feed for small quick cuts.
– Control panel with fully adjustable hydraulic down feed & automatic shut-off at end of cut, for cutting larger material. - Dual direction heavy-duty vice.
- Hydraulic blade tension gauge.
- Incorporated recirculating coolant system.
- Brass chip brush to help prevent blade breakage.
- Adjustable material stop for repetitive production.
- Safety emergency stop switch.
- 12 months warranty.
- Comes complete with stand & blade.
- Made in Taiwan.
Specifications
Motor 2hp Three Phase (415V) Blade Speed 2 Speed 36 / 72mpm Blade Size 27mm x 0.9mm x 3160mm Bed Height 890mm Weight 410kg Cutting Capacity Cutting Angle Round Square Rectangle 90° 260mm 260mm 350 x 250mm 45° Right 230mm 165mm 240 x 110mm 60° Right 150mm 90mm 150 x 90mm 45° Left 200mm 170mm 260 x 60mm (0 reviews) -
BandsawsITM Bandsaw, 260mm Cap, Swivel Head, Dual Mitre, 2 Speed 415v 3ph, Semi Automatic
Features
- 2-way swivel head enables from 0° to 60° mitre cuts.
- Semi-automatic machine.
- Dual direction heavy-duty vice.
- Hydraulic blade tension gauge.
- Incorporated recirculating coolant system.
- Brass chip brush to help prevent blade breakage.
- Adjustable material stop for repetitive production.
- Remote emergency stop non-voltage return safety switch.
- 12 months warranty.
- Comes complete with stand & blade.
- Made in Taiwan.
Specifications
Motor 2hp Three Phase (415V) Blade Speed 2 Speed 36 / 72mpm Blade Size 27mm x 0.9mm x 3160mm Bed Height 890mm Weight 530kg Cutting Capacity Cutting Angle Round Square Rectangle 90° 260mm 260mm 350 x 250mm 45° Right 230mm 165mm 240 x 110mm 60° Right 150mm 90mm 150 x 90mm 45° Left 200mm 170mm 260 x 60mm (0 reviews) -
Grinding MachinesITM Belt Grinder 1.5Kw 240V 1PH With Stand Belt Size 100 x 1500mm
Features
Quality, durable construction.
Made in Taiwan.
240 Volt Industrial Motor.
Smooth, low vibration operation.
Large sturdy base.Specifications
Motor: 1.5KW Single Phase 240V
Contact Wheel: 170 X 100mm
Platen Surface: 405 X 100mm
Grinding Belt: 1500 X 100mm(0 reviews) -
Grinding MachinesITM Bench Grinder 240V, 370W, 150mm
Features
Powerful 370W induction motor.
25mm width grinding wheels with 36 & 60 grit for fast removal of material.
Cast iron body and base for long lasting performance.
Vibration absorbing pads on base for smoother operation.
Capacitor Start-Run motor for maximum performance.
Fully adjustable tool rests for ease of use and maximum user control.
Large eye shields for increased user safety.Specifications
Motor Power: 370W
Speed: 2980RPM
Wheel Size: 150mm x 25mm
Spindle Thread: M12 x 1.75mm
Weight: 11.1kg(0 reviews) -
Grinding MachinesITM Bench Grinder 240V, 600W, 200mm
Features
Powerful 600W Induction Motor.
25mm width grinding wheels with 36 and 60 grit for fast removal of material.
Cast iron body and base for long lasting performance.
Vibration absorbing pads on base for smoother running.
Capacitor Start-Run motor for maximum performance.
Heavy Duty tool rests for maximum user control.
Large eyes shields for increased user safety.Specifications
Motor Power: 600W
Speed: 2980RPM
Wheel Size: 200mm x 25mm
Spindle Thread: M16 x 2mm
Weight: 16.7kg(0 reviews) -
Grinding Machines
ITM Bench Grinder 240V, 900W, 250mm
Features
Powerful 900W induction motor.
25mm width grinding wheels with 36 & 60 grit for fast removal of material.
Cast iron body and base for long lasting performance.
Vibration absorbing pads on base for smoother operation.
Capacitor Start-Run motor for maximum performance.
Fully adjustable tool rests for ease of use and maximum user control.
Large eye shields for increased user safety.Specifications
Motor Power: 900W
Speed: 2980RPM
Wheel Size: 250mm x 25mm
Spindle Thread: M16 x 2mm
Weight: 32kg(0 reviews) -
Grinding MachinesITM Bench Grinder 415V, 3 Phase, 900W, 250mm
Features
- Powerful 900W induction motor
- 25mm width grinding wheels with 36 & 60 grit for fast removal of material
- Cast iron body and base for long lasting performance
- Vibration absorbing pads on base for smoother operation
- Capacitor Start-Run motor for maximum performance
- Fully adjustable tool rests for ease of use and maximum user control
- Large eye shields for increased user safet
Specifications
- Powerful 900W induction motor
- 25mm width grinding wheels with 36 & 60 grit for fast removal of material
- Cast iron body and base for long lasting performance
- Vibration absorbing pads on base for smoother operation
- Capacitor Start-Run motor for maximum performance
- Fully adjustable tool rests for ease of use and maximum user control
- Large eye shields for increased user safet
(0 reviews) -
Grinding MachinesITM Bench Grinder Stand
Features
Bench Grinder Stand for use with TM400-150, TM400-200, TM400-250, TM402-200Specifications
Height: 760mm
Weight: 11.5g(0 reviews) -
Grinding MachinesITM Buffer Machine 240V, 550W, 200mm
Features
Powerful 550W Induction Motor.
Safety lock On/Off switch.
Cast iron body and base for long lasting performance.
Vibration absorbing pads on base for smoother running.
Capacitor Start-Stop motor for maximum performance.
Includes 200mm x 14mm stitched polishing mops.Specifications
Motor Power: 550W
Speed: 2850RPM
Wheel Size: 200mm x 14mm
Spindle Thread: M16 x 2mm
Weight: 11.5kg(0 reviews) -
VicesITM Chain Pipe Vice
Superb chain pipe vice with hardened steel jaws & close grained cast iron body.
Offers excellent grip for irregular shapes due to flexibility of the chain.
Can be rapidly tightened to provide a very strong grip on the pipe.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Magnetic Base Drill AccessoriesITM Drill Chuck & Adaptors
Complete setup to adapt your Holemaker machine to use twist drill bits.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Sharpening MachinesITM Drill Doctor Industrial
Features
The Drill Doctor 750X model is designed for the tradesman requiring a versatile sharpener for every day use. The 750X has the durability and the flexibility required to sharpen the largest range and most popular sizes of dull or broken bits, including split points and masonry bits. The DD750X also adds increased capacity, sharpening up to 19mm Diameter bits.Works Every Time – Consistently sharpen bits as good or better than brand new.
Convenient – Sharpen drill bits in the home, shop, garage or job site.
Versatile – Re-sharpen standard, carbide, high speed steel, masonry, cobalt, TiN coated and parabolic twist drill bits.
Fast – Sharpening a dull worn drill bit to precision sharpness takes less than a minute.FEATURES.
Adjust Point Angle.
Adjustable Relief Angle.
Adjustable Material Removal.
Creates & restores split point bits.
User replaceable diamond sharpening wheel.
3 Year warrantySpecifications
Drill Bit Capacity: 2.5mm – 19mm (3/32″” to 3/4″”)
Point Angle: Variable 115° to 140°
Voltage: 240V 1PH(0 reviews) -
Sharpening MachinesITM Drill Doctor Industrial
Features
The Drill Doctor 500X model is designed for the tradesman requiring a versatile sharpener for every day use. The 500X has the durability and the flexibility required to sharpen the largest range and most popular sizes of dull or broken bits, including split points and masonry bits.Works Every Time – Consistently sharpen bits as good or better than brand new.
Convenient – Sharpen drill bits in the home, shop, garage or job site.
Versatile – Re-sharpen standard, carbide, high speed steel, masonry, cobalt, TiN coated and parabolic twist drill bits.
Fast – Sharpening a dull worn drill bit to precision sharpness takes less than a minute.FEATURES.
Adjust Point Angle.
Adjustable Relief Angle.
Creates & restores split point bits.
User replaceable diamond sharpening wheel.
3 year warranty.Specifications
Drill Bit Capacity: 2.5mm – 13mm (3/32″ to 1/2″)
Point Angle: 118° or 135°
Voltage: 240V 1PH(0 reviews) -
Sharpening MachinesITM Drill Doctor XP
Features
The DDXP is perfect for the serious DIY’er, hobbyist and the professional user with the sharpening power needed to restore dull bits and keep on working. The DDXP adds simplicity, stability and accuracy.The Drill Doctor Drill Bit Sharpener offers a powerful motor for smooth operation and Diamond grinding wheel providing long life & constant geometry without the need for wheel dressing.Suitable for sharpening High Speed Steel, Masonry, TiN Coated, Carbide, Cobalt & Parabolic twist drills. With its adjustable relief angle and the ability to create and sharpen split point bits, the DDXP is a must have for any workshop.
Features.
Adjustable point angle.
Adjustable relief angle.
Creates & restores split point bits.
User replaceable diamond sharpening wheel.
3 year warranty.Specifications
Drill Bit Capacity 2.5mm – 13mm (3/32″ to 1/2″)
Point Angle 118°
Voltage 240V 1PH(0 reviews) -
VicesITM Drill Press Cross Vice
- Cast iron body
- Machined steel jaws
- Great for machine shops, fabrication workshops & tool rooms
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
VicesITM Drill Press Vice
Cast Iron Body.
Machined Steel Jaws.
Great For Machine Shops, Fabrication Workshops & Tool Rooms(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
VicesITM Drill Press Vice Leader Clamp Type
Heavy Duty Cast Iron Body.
Machined Steel Jaws.
Great For Machine Shops, Fabrication Workshops & Tool Rooms(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Magnetic Base Drill AccessoriesITM Drillmate Mega Vac Pad
Features
Adapt your Holemaker machine for use on non-ferrous materials.The DM210MV Mega Vac-Pad will take all Holemaker machines with the exception of the PRO200A.
It is also compatible with the HMPRO36AD and HMPRO35MS.Specifications
Overall Dimensions: 440 x 250mm
Steel Plate Size: 350 x 250 x 12mm
Holding Power: 810kg (1786lb)
Air Pressure Required: 2.0cfm @ 85psi Weight (Incl Plate): 16kg(0 reviews) -
Magnetic Base Drill AccessoriesITM Drillmate Vac Pad Base
Features
Adapt your Holemaker machine for use on non-ferrous materials.
DM110SP Vac-pad dimensions – 200 x 133mm
Suits machines:
HMPRO35
HMPRO35AUTO
HMPRO35T3
HMPRO40
HMPRO42
HMPRO50
HMPRO65
HMSPECIAL60
HMSPECIAL80
Note – the HMPRO36AD and HMPRO35MS cannot be used on the DM110SPSpecifications
Surface does not have to be smooth, imperfections up to 3.0mm.
Surface holding power is 3383NmOverall Dimensions: 400 x 153mm
Steel Plate Size: 202 x 136 x 12mm
Air Pressure Required: 2.0cfm @ 85psi.
Weight (Incl Plate): 4.14kg(0 reviews) -
VentilatorsITM Ducting To Suit Portable Ventilator
5 Metre Expandable Ducting To Suit Portable Ventilator
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Magnetic Base Drill AccessoriesITM Extension Arbors
An extension arbor allows greater depths to be reached with your Holemaker cutters
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page