Workshop Tools
Showing 181–216 of 369 results
-
Vices
ITM Multi Purpose Bench Vice
Superb quality multi purpose bench vice with 360° swivel rotation with safety locking nuts. The body of the vice is reversible with 3 sets of configurations for use with both flat or rounded material. Both the jaws and anvil are tempered to withstand constant industrial use.
Jaw width: 125mm
Jaw opening: 135mm
Pipe holding capacity: 25mm – 65mm(0 reviews) -
Grinding Machines
ITM Multitool Belt and Disc Grinding Attachment 1220x100mm
Features
The Multitool is a renowned, Australian designed belt grinding attachment which can be used on most bench grinders. The technology replaces the grinding wheel and converts a traditional grinder into a sophisticated work station ideal for sanding, grinding, sharpening, shaping, polishing and refinishing.- EFFICIENCY – Superior performance and a user friendly, toolless belt change in under 5 seconds.
- VERSATILITY – Grinding, sanding or polishing in 4 positions on rubber contact wheel, platen, disc or free strapping. The unit can also be swivelled vertically or any position in between.
- ACCURATE TRACKING – The running position of the belt is simple to adjust and it stays there, allowing for finishing into sharp corners.
- QUALITY CONSTRUCTION – Robust, maintenance free with sealed ball bearings, hardened and ground essential components and zinc plating.
- 3 YEAR WARRANTY – Against faulty materials and workmanship, even when used commercially.
Specifications
- 48″ x 4″ wide (1220 x 100mm) belt.
- 7″ (178mm) diameter disc.
- 3 1/2″ (89mm) diameter rubber contact wheel.
- 5 1/2″ (140mm) diameter drive wheel.
- The 484 suits most popular 8″ bench grinders with a screw mounted wheel guard and a minimum of 1 HP.
- Suits shaft sizes of 5/8″ and 1/2″. A steel bush is supplied to adapt the drive wheel to 1/2″.
- Fitting Kit supplied.
- NOTE: This is an attachment only.
(0 reviews) -
Grinding Machines
ITM Multitool Belt and Disc Grinding Attachment 1220x100mm 200mm Contact Wheel
Features
The Multitool is a renowned, Australian designed belt grinding attachment which can be used on most bench grinders. The technology replaces the grinding wheel and converts a traditional grinder into a sophisticated work station ideal for sanding, grinding, sharpening, shaping, polishing and refinishing.- EFFICIENCY – Superior performance and a user friendly, toolless belt change in under 5 seconds.
- VERSATILITY – Grinding, sanding or polishing in 4 positions on rubber contact wheel, platen, disc or free strapping. The unit can also be swivelled vertically or any position in between.
- ACCURATE TRACKING – The running position of the belt is simple to adjust and it stays there, allowing for finishing into sharp corners.
- QUALITY CONSTRUCTION – Robust, maintenance free with sealed ball bearings, hardened and ground essential components and zinc plating.
- 3 YEAR WARRANTY – Against faulty materials and workmanship, even when used commercially.
Specifications
- 48″ x 2″ (1220 x 50mm) belt
- 7″ (178mm) diameter disc
- 8″ (200mm) diameter rubber contact wheel
- 5 1/2″ (140mm) diameter drive wheel
- Suits most 8″ or 10″ bench grinders with a screw mounted wheel guard and a minimum of 3/4 HP
- Suits grinder shaft sizes of 5/8″ and 1/2″. A steel bush is supplied to adapt the drive wheel to 1/2″
- Fitting Kit supplied
(0 reviews) -
Grinding Machines
ITM Multitool Belt and Disc Grinding Attachment 1220x50mm
Features
The Multitool is a renowned, Australian designed belt grinding attachment which can be used on most bench grinders. The technology replaces the grinding wheel and converts a traditional grinder into a sophisticated work station ideal for sanding, grinding, sharpening, shaping, polishing and refinishing.- EFFICIENCY – Superior performance and a user friendly, toolless belt change in under 5 seconds.
- VERSATILITY – Grinding, sanding or polishing in 4 positions on rubber contact wheel, platen, disc or free strapping. The unit can also be swivelled vertically or any position in between.
- ACCURATE TRACKING – The running position of the belt is simple to adjust and it stays there, allowing for finishing into sharp corners.
- QUALITY CONSTRUCTION – Robust, maintenance free with sealed ball bearings, hardened and ground essential components and zinc plating.
- 3 YEAR WARRANTY – Against faulty materials and workmanship, even when used commercially.
Specifications
- 48″ x 2″ (1220 x 50mm) belt.
- 7″ (178mm) diameter disc.
- 3 1/2″ (89mm) diameter rubber contact wheel.
- 5 1/2″ (140mm) diameter drive wheel.
- The 482 suits most popular 8″ bench grinders with a screw mounted wheel guard and a minimum of 1/2 HP, though 3/4 HP is recommended.
- Suits shaft sizes of 5/8″ and 1/2″. A steel bush is supplied to adapt the drive wheel to 1/2″.
- Fitting Kit supplied.
(0 reviews) -
Grinding Machines
ITM Multitool Belt and Disc Grinding Attachment 915x100mm
Features
The Multitool is a renowned, Australian designed belt grinding attachment which can be used on most bench grinders. The technology replaces the grinding wheel and converts a traditional grinder into a sophisticated work station ideal for sanding, grinding, sharpening, shaping, polishing and refinishing.- EFFICIENCY – Superior performance and a user friendly, toolless belt change in under 5 seconds.
- VERSATILITY – Grinding, sanding or polishing in 4 positions on rubber contact wheel, platen, disc or free strapping. The unit can also be swivelled vertically or any position in between.
- ACCURATE TRACKING – The running position of the belt is simple to adjust and it stays there, allowing for finishing into sharp corners.
- QUALITY CONSTRUCTION – Robust, maintenance free with sealed ball bearings, hardened and ground essential components and zinc plating.
- 3 YEAR WARRANTY – Against faulty materials and workmanship, even when used commercially.
Specifications
- 36″ x 4″ wide (915 x 100mm) belt.
- 7″ (178mm) diameter disc.
- 3 1/2″ (89mm) diameter rubber contact wheel.
- 5 1/2″ (140mm) diameter drive wheel.
- The 364 suits most popular 8″ bench grinders with a screw mounted wheel guard and a minimum of 1/2 HP, though 3/4 HP is recommended.
- Suits grinder shafts sizes of 5/8″ and 1/2″. A steel bush is supplied to adapt the drive wheel to 1/2″.
- Fitting Kit supplied.
(0 reviews) -
Grinding Machines
ITM Multitool Belt and Disc Grinding Attachment 915x50mm
Features
The Multitool is a renowned, Australian designed belt grinding attachment which can be used on most bench grinders. The technology replaces the grinding wheel and converts a traditional grinder into a sophisticated work station ideal for sanding, grinding, sharpening, shaping, polishing and refinishing.- EFFICIENCY – Superior performance and a user friendly, toolless belt change in under 5 seconds.
- VERSATILITY – Grinding, sanding or polishing in 4 positions on rubber contact wheel, platen, disc or free strapping. The unit can also be swivelled vertically or any position in between.
- ACCURATE TRACKING – The running position of the belt is simple to adjust and it stays there, allowing for finishing into sharp corners.
- QUALITY CONSTRUCTION – Robust, maintenance free with sealed ball bearings, hardened and ground essential components and zinc plating.
- 3 YEAR WARRANTY – Against faulty materials and workmanship, even when used commercially.
Specifications
- 36″ x 2″ (915 x 50mm) belt – 100 Grit
- 7″ (178mm) diameter disc – 120 Grit
- 3 1/2″ (89mm) diameter rubber contact wheel
- 5 1/2″ (140mm) diameter drive wheel
- Suits most 150mm & 200mm bench grinders with a minimum of 1/3 HP motor and screw mounted guards
(0 reviews) -
Grinding Machines
ITM Multitool PO362 Attachment on PO200HD Multitool 750W Bench Grinder
Features
Combine the robust PO200HD MULTITOOL 200mm Bench Grinder with one of Australia’s leading belt grinding attachments PO362.
PO200HD
- Powerful; 750W (1HP) induction motor
- Cast iron body and base for long lasting performance
- Capacitor start / run motor
- NVR safety switch
- Large eye shield for added user safety
- Heavy-duty tool rests
- Fully Assembled
PO362
The Multitool is a renowned, Australian designed belt grinding attachment which can be used on most bench grinders. The technology replaces the grinding wheel and converts a traditional grinder into a sophisticated work station ideal for sanding, grinding, sharpening, shaping, polishing and refinishing.- EFFICIENCY – Superior performance and a user friendly, toolless belt change in under 5 seconds.
- VERSATILITY – Grinding, sanding or polishing in 4 positions on rubber contact wheel, platen, disc or free strapping. The unit can also be swivelled vertically or any position in between.
- ACCURATE TRACKING – The running position of the belt is simple to adjust and it stays there, allowing for finishing into sharp corners.
- QUALITY CONSTRUCTION – Robust, maintenance free with sealed ball bearings, hardened and ground essential components and zinc plating.
Specifications
- 36″ x 2″ (915 x 50mm) belt – 100 Grit
- 7″ (178mm) diameter disc – 120 Grit
- 3 1/2″ (89mm) diameter rubber contact wheel
- 5 1/2″ (140mm) diameter drive wheel
(0 reviews) -
Grinding Machines
ITM Multitool PO362 Attachment on TM400-150 ITM 150mm Bench Grinder
Features
Combine the robust TM400-150 ITM 150mm Bench Grinder with one of Australia’s leading belt grinding attachments PO362.TM400-150
- Powerful 370W Induction Motor.
- 25mm width grinding wheels
- Cast iron body and base for long lasting performance.
- Vibration absorbing pads on base for smoother running.
- Capacitor Start-Run motor for maximum performance.
- Fully adjustable tool rests for ease of use and maximum user control.
- Large eyes shield for increased user safety.
PO362
The Multitool is a renowned, Australian designed belt grinding attachment which can be used on most bench grinders. The technology replaces the grinding wheel and converts a traditional grinder into a sophisticated work station ideal for sanding, grinding, sharpening, shaping, polishing and refinishing.- EFFICIENCY – Superior performance and a user friendly, toolless belt change in under 5 seconds.
- VERSATILITY – Grinding, sanding or polishing in 4 positions on rubber contact wheel, platen, disc or free strapping. The unit can also be swivelled vertically or any position in between.
- ACCURATE TRACKING – The running position of the belt is simple to adjust and it stays there, allowing for finishing into sharp corners.
- QUALITY CONSTRUCTION – Robust, maintenance free with sealed ball bearings, hardened and ground essential components and zinc plating.
- 3 YEAR WARRANTY – Against faulty materials and workmanship, even when used commercially.
Specifications
- 36″ x 2″ (915 x 50mm) belt – 100 Grit
- 7″ (178mm) diameter disc – 120 Grit
- 3 1/2″ (89mm) diameter rubber contact wheel
- 5 1/2″ (140mm) diameter drive wheel
(0 reviews) -
Grinding Machines
ITM Multitool PO362 Attachment on TM400-200 ITM 200mm Bench Grinder
Combine the robust TM400-200 ITM 200mm Bench Grinder with one of Australia’s leading belt grinding attachments PO362.
TM400-200
- Powerful 600W Induction Motor.
- 25mm width grinding wheels
- Cast iron body and base for long lasting performance.
- Vibration absorbing pads on base for smoother running.
- Capacitor Start-Run motor for maximum performance.
- Heavy Duty tool rests for maximum user control.
- Large eyes shield for increased user safety.
PO362
The Multitool is a renowned, Australian designed belt grinding attachment which can be used on most bench grinders. The technology replaces the grinding wheel and converts a traditional grinder into a sophisticated work station ideal for sanding, grinding, sharpening, shaping, polishing and refinishing.- EFFICIENCY – Superior performance and a user friendly, toolless belt change in under 5 seconds.
- VERSATILITY – Grinding, sanding or polishing in 4 positions on rubber contact wheel, platen, disc or free strapping. The unit can also be swivelled vertically or any position in between.
- ACCURATE TRACKING – The running position of the belt is simple to adjust and it stays there, allowing for finishing into sharp corners.
- QUALITY CONSTRUCTION – Robust, maintenance free with sealed ball bearings, hardened and ground essential components and zinc plating.
Specifications
TM400-200
- Motor Power: 600W
- Speed: 2980RPM
- Wheel Size: 200mm x 25mm
- Spindle Thread: M16 x 2mm
- Weight: 16.7kg
PO362
- 36″ x 2″ (915 x 50mm) belt – 100 Grit
- 7″ (178mm) diameter disc – 120 Grit
- 3 1/2″ (89mm) diameter rubber contact wheel
- 5 1/2″ (140mm) diameter drive wheel
- Suits most 150mm & 200mm bench grinders with a minimum of 1/3 HP motor and screw mounted guards
(0 reviews) -
Grinding Machines
ITM Multitool PO364 Attachment on TM400-250 ITM 250mm Bench Grinder
Features
Combine the robust TM400-250 ITM 250mm Bench Grinder with one of Australia’s leading belt grinding attachments PO364.TM400-250
- Powerful 900W Induction Motor.
- 25mm width grinding wheels
- Cast iron body and base for long lasting performance.
- Vibration absorbing pads on base for smoother running.
- Capacitor Start-Run motor for maximum performance.
- Heavy Duty tool rests for maximum user control.
- Large eyes shield for increased user safety.
PO364
The Multitool is a renowned, Australian designed belt grinding attachment which can be used on most bench grinders. The technology replaces the grinding wheel and converts a traditional grinder into a sophisticated work station ideal for sanding, grinding, sharpening, shaping, polishing and refinishing.- EFFICIENCY – Superior performance and a user friendly, toolless belt change in under 5 seconds.
- VERSATILITY – Grinding, sanding or polishing in 4 positions on rubber contact wheel, platen, disc or free strapping. The unit can also be swivelled vertically or any position in between.
- ACCURATE TRACKING – The running position of the belt is simple to adjust and it stays there, allowing for finishing into sharp corners.
- QUALITY CONSTRUCTION – Robust, maintenance free with sealed ball bearings, hardened and ground essential components and zinc plating.
- 3 YEAR WARRANTY – Against faulty materials and workmanship, even when used commercially.
Specifications
- 36″ x 4″ wide (915 x 100mm) belt.
- 7″ (178mm) diameter disc.
- 3 1/2″ (89mm) diameter rubber contact wheel.
- 5 1/2″ (140mm) diameter drive wheel.
(0 reviews) -
Grinding Machines
ITM Multitool PO482 Attachment on TM400-250 ITM 250mm Bench Grinder
Features
Combine the robust TM400-250 ITM 250mm Bench Grinder with one of Australia’s leading belt grinding attachments PO482.TM400-250
- Powerful 900W Induction Motor.
- 25mm width grinding wheels
- Cast iron body and base for long lasting performance.
- Vibration absorbing pads on base for smoother running.
- Capacitor Start-Run motor for maximum performance.
- Fully adjustable tool rests for ease of use and maximum user control.
- Large eyes shield for increased user safety.
PO482
The Multitool is a renowned, Australian designed belt grinding attachment which can be used on most bench grinders. The technology replaces the grinding wheel and converts a traditional grinder into a sophisticated work station ideal for sanding, grinding, sharpening, shaping, polishing and refinishing.- EFFICIENCY – Superior performance and a user friendly, toolless belt change in under 5 seconds.
- VERSATILITY – Grinding, sanding or polishing in 4 positions on rubber contact wheel, platen, disc or free strapping. The unit can also be swivelled vertically or any position in between.
- ACCURATE TRACKING – The running position of the belt is simple to adjust and it stays there, allowing for finishing into sharp corners.
- QUALITY CONSTRUCTION – Robust, maintenance free with sealed ball bearings, hardened and ground essential components and zinc plating.
- 3 YEAR WARRANTY – Against faulty materials and workmanship, even when used commercially.
Specifications
- 48″ x 2″ (1220 x 50mm) belt.
- 7″ (178mm) diameter disc.
- 3 1/2″ (89mm) diameter rubber contact wheel.
- 5 1/2″ (140mm) diameter drive wheel.
(0 reviews) -
Grinding Machines
ITM Multitool PO484 Attachment on TM400-250 ITM 250mm Bench Grinder
Features
Combine the robust TM400-250 ITM 250mm Bench Grinder with one of Australia’s leading belt grinding attachments PO484.TM400-250
- Powerful 900W Induction Motor.
- 25mm width grinding wheels
- Cast iron body and base for long lasting performance.
- Vibration absorbing pads on base for smoother running.
- Capacitor Start-Run motor for maximum performance.
- Heavy Duty tool rests for maximum user control.
- Large eyes shield for increased user safety.
PO484
The Multitool is a renowned, Australian designed belt grinding attachment which can be used on most bench grinders. The technology replaces the grinding wheel and converts a traditional grinder into a sophisticated work station ideal for sanding, grinding, sharpening, shaping, polishing and refinishing.- EFFICIENCY – Superior performance and a user friendly, toolless belt change in under 5 seconds.
- VERSATILITY – Grinding, sanding or polishing in 4 positions on rubber contact wheel, platen, disc or free strapping. The unit can also be swivelled vertically or any position in between.
- ACCURATE TRACKING – The running position of the belt is simple to adjust and it stays there, allowing for finishing into sharp corners.
- QUALITY CONSTRUCTION – Robust, maintenance free with sealed ball bearings, hardened and ground essential components and zinc plating.
- 3 YEAR WARRANTY – Against faulty materials and workmanship, even when used commercially.
Specifications
- 48″ x 4″ wide (1220 x 100mm) belt.
- 7″ (178mm) diameter disc.
- 3 1/2″ (89mm) diameter rubber contact wheel.
- 5 1/2″ (140mm) diameter drive wheel.
(0 reviews) -
Belt Drive Drilling Machines
ITM Pedestal Floor Drill Press, 2m, 16mm Cap, 16 Speed, 325mm Swing, 550W 240V
Features
Quality casting, construction & componentry.
Emergency stop.
NVR safety switch.Each Unit Supplied With:.
Chuck safety guard.
Drill chuck & arbor.
Drill drift (on MT models)Specifications
Drilling Capacity (mm): 16mm (5/8″)
Spindle Taper: #2MT
Chuck: 3-16mm B16
Motor Power: 550W 240V
Spindle Travel (mm): 85
Speed: 16 Speed 180-2770
Swing (mm): 325
Table Size / Base Size (mm): 290 / 460×272
Column Diameter (mm): 72
Height (mm): 1580
N.W. / G.W. (kg):50 / 53Drill press vice to suit: VDP102
Cross slide vice to suit: TM130-100(0 reviews) -
Belt Drive Drilling Machines
ITM Pedestal Floor Drill Press, 2m, 16mm Cap, 16 Speed, 360mm Swing, 550W 240V
Features
Quality casting, construction & componentry.
Emergency stop.
NVR safety switch.Each Unit Supplied With:
Chuck safety guard.
Drill chuck & arbor.
Drill drift (on MT models)Specifications
Drilling Capacity (mm): 16mm (5/8″)
Spindle Taper: #2MT
Chuck: 3-16mm B16
Motor Power: 550W 240V
Spindle Travel (mm): 85
Speed: 16 Speed 180-2770
Swing (mm): 360
Table Size / Base Size (mm): 290 x 290 / 460×272
T-Slot Size: 16mm
Column Diameter (mm): 72
Height (mm): 1600
N.W. / G.W. (kg): 58 / 62Drill press vice to suit: VDP102 or VDP150
Cross slide vice to suit: TM130-100(0 reviews) -
Belt Drive Drilling Machines
ITM Pedestal Floor Drill Press, 3m, 20mm Cap, 12 Speed, 360mm Swing, 750W 240V
Features
Quality casting, construction & componentry.
Emergency stop.
NVR safety switch.Each Unit Supplied With:.
Chuck safety guard.
Drill chuck & arbor.
Drill drift (on MT models)Specifications
Drilling Capacity (mm): 20mm (3/4″)
Spindle Taper: #3MT
Chuck: 5-20mm B22
Motor Power: 750W 240V
Spindle Travel (mm): 85
Speed: 12 Speed 280-2380
Swing (mm): 360
Table Size / Base Size (mm): 290×290 / 460×272
Column Diameter (mm): 80
T-Slot Size: 16mm
Height (mm): 1600
N.W. / G.W. (kg): 64 / 68Drill press vice to suit: VDP102 or VDP150
Cross slide vice to suit: TM130-100(0 reviews) -
Belt Drive Drilling Machines
ITM Pedestal Floor Drill Press, 3m, 25mm Cap, 12 Speed, 450mm Swing, 1500W 240V
Features
Quality casting, construction & componentry.
Emergency stop.
NVR safety switch.Each Unit Supplied With:.
Chuck safety guard.
Drill chuck & arbor.
Drill drift (on MT models)Specifications
Drilling Capacity (mm): 25mm (1″)
Spindle Taper: #3MT
Chuck: 5-20mm B22
Motor Power: 1500W 240V
Spindle Travel (mm): 120
Speed: 12 Speed 150-2450
Swing (mm): 450
Table Size / Base Size (mm): 350×350 / 500×375
Column Diameter (mm): 92
T-Slot Size: 14mm
Height (mm): 1710
N.W. / G.W. (kg): 101 / 109Drill press vice to suit: VDP150
Cross slide vice to suit: TM130-150(0 reviews) -
Belt Drive Drilling Machines
ITM Pedestal Floor Drill Press, 4m, 32mm Cap, 12 Speed, 510mm Swing, 1500W 240V
Features
Quality casting, construction & componentry.
Emergency stop.
NVR safety switch.Each Unit Supplied With:.
Chuck safety guard.
Drill chuck & arbor.
Drill drift (on MT models)Specifications
Drilling Capacity (mm): 32mm (1-1/4″)
Spindle Taper: #4MT
Chuck: 5-20mm B22
Motor Power: 1500W 240V
Spindle Travel (mm): 120
Speed: 12 Speed 150-2450
Swing (mm): 510
Table Size / Base Size (mm): 420×480 / 560×450
Column Diameter (mm): 92
T-Slot Size: 14mm
Height (mm): 1710
N.W. / G.W. (kg): 114 / 122Drill press vice to suit: VDP150
Cross slide vice to suit: TM130-150(0 reviews) -
Grinding Machines
ITM Pipe Notch Rollers
Roller component to suit ITM pipe notcher.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Grinding Machines
ITM Pipe Notcher, 240V, 100 x 2000 Belt, 20-70mm O.D Pipe Capacity
Features
A fast, inexpensive & accurate way to notch pipe & tubing between 30° & 90° angles.Smooth, high output motor.
Platen grinding surface.
Low vibration running is achieved by the extra heavy duty robust construction, with sturdy workbase, & 14mm thick plate mainframe.
Stainless steel fastenings.
Emergency stop NVR safety switch.
Package includes:.
– Pipe Notching Machine.
– Roller t/s 20mm N.B Pipe.
– Roller t/s 25mm N.B Pipe.
– Roller t/s 32mm N.B Pipe.
– Roller t/s 40mm N.B Pipe.
– Roller t/s 50mm N.B Pipe.
– Grinding Belt.
– ToolboxSpecifications
Motor: 2.2KW Singe Phase 240V
Flat Surface: 590 x 100mm
Grinding Belt: 2000 x 100mm
Vice: 30° – 90° Swivel Vice
Pipe: O.D Capacity 17 – 70mm
Weight: 170kg(0 reviews) -
Ventilators
ITM Portable Ventilator
Suitable for air/fume extraction or blowing fresh air. Ideal ventilation for workshops and confined areas.
Large capacity motor creating a very high flow rate.
Specially designed axial propeller.
High static pressure(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Ventilators
ITM Portable Ventilator Set
Ventilator Set Includes Ventilator & Ducting.
Suitable for air/fume extraction or blowing fresh air. Ideal ventilation for workshops and confined areas.
Large capacity motor creating a very high flow rate.
Specially designed axial propeller.
High static pressure(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Grinding Machines
ITM Premium Bench Grinder Stand
Features
Premium Bench Grinder Stand for use with TM400-150, TM400-200, TM400-250, TM402-200Specifications
Height: 840mm
Weight: 14kg(0 reviews) -
Magnetic Base Drill Accessories
ITM Quick Change Morse Taper Arbors
These Quick Grip Arbors offer a tool less approach to holding 3/4″ Weldon Shank Holemaker cutters in place. Complete with coolant inducer.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Magnetic Base Drill Accessories
ITM Quick Change Tapping System
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Magnetic Base Drill Accessories
ITM Shank Adaptors
Adapt your magnetic base drilling machine for various applications.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Vices
ITM Shop Bench Vice Cast Iron
Hardened steel jaws.
Close grained cast iron body(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Grinding Machines
ITM Stand to Suit ITM 12″ Bench Grinder
Features
- Top plates to suit up to 12″ bench grinders
- Very strong & sturdy design
- Large base plate with multiple mounting holes
- Large water parts bin
*Bench grinder and accessories not included.
Specifications
Height: 805mm(0 reviews) -
Cutting Fluid
ITM Tap Magic Aluminium Fluid
Tap Magic Aluminum is a professional quality cutting fluid that is specially engineered for cutting and machining operations on aluminium and other nonferrous metals. This is absolutely the most effective cutting fluid you can use for working with aluminium. Drilling, tapping, sawing – regardless of the cut, you’ll enjoy superior performance, superb precision, and a beautiful microfine finish. Tap Magic Aluminium dissipates heat rapidly and provides closer tolerances. It also helps promote longer tool life.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Cutting Fluid
ITM Tap Magic EP-XTRA Fluid
Highly effective for all cutting operations on all metals. You will especially appreciate the performance of this cutting fluid on hard metals and with difficult extreme-pressure cuts of long duration. You will also note dramatic improvements in tool life.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Cutting Fluid
ITM Tap Magic Extra Thick
Features
Tap Magic XTRA-THICK is without equal when making cuts of long duration on the hardest metals such as inconel, titanium, stainless and other hardened steels. In fact, it’s highly effective on any metal up to 45 HRC! Tap Magic XTRA-THICK contains the proprietary EP-X3 additive for a performance boost. It virtually eliminates work hardening and it has an extended cling time “” so it stays with the tool and work piece longer for deep hole cuts.Specifications
Description: 472ml Bottle (12 Per Carton)(0 reviews)