Workshop Tools
Showing 577–612 of 731 results
-
Mobile Seats & StoolsSP TOOLS Pneumatic Stool with Storage
FEATURES
- Pneumatic seat adjusts from 420mm to 533mm
- 430mm reinforced steel base with 5 heavy duty swivel castors
- 3 Section tray base with removable magnetic pad
- High density foam padded seat
- Chrome plated heavy duty steel frame
- Recommended for garage and shop use
Note: Tools not included
(0 reviews) -
Mobile Seats & StoolsSP TOOLS Pneumatic Stool with Swivel Top
FEATURES
- Pneumatic seat adjusts from 660mm to 787mm
- High density foam padded seat
- Chrome plated heavy duty steel frame
- Non-slip rubber feet
(0 reviews) -
Electrical PoweredSP TOOLS Pressure Washer – Electric Heavy Duty Hand Held Portable – 2030PSI – 8.3LPM
FEATURES
- Auto Stop Motor
- Adjustable Pressure with gauge
- Lightweight, approximately 20kg
- Triplex Brass Pump with Ceramic Pistons
- 2 Year Warranty
SPECIFICATIONS
- PRESSURE (MAX): 2030PSI
- FLOW RATE: 8.3 L/min
- POWER: 2100 Watts
- HOSE LENGTH: 8 Meters
EQUIPMENT INCLUDED
- Professional Trigger
- Variable Spray Nozzle Lance
- 8m High Pressure Hose with Quick Connect
- 5m Power Cord
- Transparent Water Filter
(0 reviews) -
Electrical PoweredSP TOOLS Pressure Washer – Electric Heavy Duty Hand Held Portable – 2030PSI – 8.3LPM – Includes Trolley
FEATURES
- Auto Stop Motor
- Adjustable Pressure with gauge
- Lightweight, approximately 20kg
- Triplex Brass Pump with Ceramic Pistons
- 2 Year Warranty
SPECIFICATIONS
- PRESSURE (MAX): 2030PSI
- FLOW RATE: 8.3 L/min
- POWER: 2100 Watts
- HOSE LENGTH: 8 Meters
EQUIPMENT INCLUDED
- Professional Trigger
- Variable Spray Nozzle Lance
- 8m High Pressure Hose with Quick Connect
- Quick Connect Lightweight Trolley
- 5m Power Cord
- Transparent Water Filter
(0 reviews) -
Petrol PoweredSP TOOLS Pressure Washer – Petrol – 2500psi – 9.7LPM – Domestic Limited Edition
FEATURES
- Heavy Duty Professional Trigger
- 0°, 15°, 25°, 40° & Detergent Nozzles
- Adjustable pressure
- German Parker seals
- Brass head 3 axial piston pump
- On-board Storage
- Solid Rubber Wheels
- 2 Year Pump Warranty
- 3 Year Engine Warranty
SPECIFICATIONS
- PRESSURE (MAX): 2500PSI
- FLOW RATE: 9.7 L/min
- POWER: 5.5Hp Torini Engine
- FUEL TANK: 3 Litre Tank
- HOSE LENGTH: 8 Meters
EQUIPMENT INCLUDED
- Heavy Duty Professional Trigger
- Full metal lance with quick connect
- 5 quick connect nozzles – 0°, 15°, 25°, 40° & detergent nozzles
- 8m textile braided hose with M22 fittings
- Inlet Water Filter
INCLUDES BONUS SNOW CANNON
- Provides a thick, high coverage snow foam
- Easy installation – M22 adapter & bayonet fitting included
- 600ml detergent bottle
- High quality components
- Max pressure: 186bar
(0 reviews) -
Petrol PoweredSP TOOLS Pressure Washer – Petrol – 3600psi – 11.3LPM – Heavy Duty Limited Edition
FEATURES
- Heavy Duty Professional Trigger
- 0°, 15°, 25°, 40° & Detergent Nozzles
- Adjustable pressure
- German Parker seals
- Brass head 3 axial piston pump
- On-board Storage
- Solid Rubber Wheels
- 2 Year Pump Warranty
- 3 Year Engine Warranty
SPECIFICATIONS
- PRESSURE (MAX): 3600PSI
- FLOW RATE: 11.3 L/min
- POWER: 6.5Hp Torini Engine
- FUEL TANK: 3 Litre Tank
- HOSE LENGTH: 10 Meters
EQUIPMENT INCLUDED
- Heavy Duty Professional Trigger
- Full metal lance with quick connect
- Turbo Nozzle
- 5 quick connect nozzles – 0°, 15°, 25°, 40° & detergent nozzles
- 10m Steel Braided Hose with Quick Connect Fittings
- Inlet Water Filter
INCLUDES BONUS 21″ PROFESSIONAL PATIO CLEANER
- Water jets capable of 4000PSI combined with heavy duty brush bristles makes surface cleaning a breeze
- Professional grade rotation mechanism provides long life
- Non-marking 3” swivel castors
- Made from strengthened 304 stainless steel with lightweight aluminium handle
- Max operating temperature up to 90˚C (194˚F)
- 3/8” Quick connect hose fitting on trigger
(0 reviews) -
AccessoriesSP TOOLS Pressure Washer Accessory – Drain & Pipe Cleaner – Suits All Models
FEATURES
- Clears blocked pipes and drains, downpipes & toilets
- 10 Meter Hose Length
- Compatible Machines: All electric & petrol pressure washer Models
(0 reviews) -
AccessoriesSP TOOLS Pressure Washer Accessory – Patio Cleaner – Suits AR120, AR130 & SP140
FEATURES
- Cleans flat surfaces 60-80% faster than your standard wand
- Two rotary fan jets enhance cleaning performance delivering smooth, even & streak and splash free cleaning
- Extension lance included
- Ideal for Heavy duty washing of hard surfaces such as patios, decks and driveways
- Compatible Machines: AR100, AR120, AR130, SP140 & SP150RLW
(0 reviews) -
AccessoriesSP TOOLS Pressure Washer Accessory – Rotary Brush – Suits AR120, AR130, SP140, & SP160RLW
FEATURES
- Spinning soft brush saves time and soap
- Eliminate road film and dirt without damaging the surface
- Feathered bristles provide a gentle scrubbing action that is safe for any surface
- Can be used with low pressure soap applications Ideal for heavy duty washing of vehicles, alloys, caravans, boats, outdoor furniture or other painted materials
- Compatible Machines: AR100, AR120,AR130, SP140, SP150RLW & SP160RLW
(0 reviews) -
AccessoriesSP TOOLS Pressure Washer Accessory – Self Priming Kit – Suits All Electric Models
FEATURES
- Draws water from bucket
- Water saving system
- 1 Meter Hose Length
- Compatible Machines: All electric & petrol pressure washer Models
(0 reviews) -
AccessoriesSP TOOLS Pressure Washer Accessory – Transparent Water Filter – Suits All Models
FEATURES
- Prevents dirt and debris in the water from entering the pressure washer
- Prevents clogging of nozzles
- Saves time, money and extends pressure washer service life
- Compatible Machines: All electric & petrol pressure washer models
(0 reviews) -
AccessoriesSP TOOLS Pressure Washer Accessory – Water Suction Kit – Suits All Models
FEATURES
- Converts a pressure washer into a water mover – remove large quantities of water
- Ideal for emptying ponds, pools & sinks and great for flood water removal
- Compatible Machines: All electric & petrol pressure washer Models
(0 reviews) -
Tear Down BenchesSP TOOLS Professional Engine Tear Down Bench – 1 Drawer + Fluid Receiver Drawer – Blue/Black
FEATURES
- Heavy duty steel frame
- Tapered bench top to drain oil/fluid away from work area
- Load capacity: 260kg
- 1x lockable drawer
- Fluid receiver: 5 Litre
- Supplied with heavy duty castors or can be bolted to the floor
DIMENSIONS
TEAR DOWN BENCH (mm)
- 1200w x 645d x 872h
DRAWER DIMENSIONS
- 1x drawers: 345w x 430d x 120h
LOAD WEIGHTS
Max Load – 260Kg
(0 reviews) -
Sand Blasting GunsSP TOOLS Sandblasting Gun – 1 Litre
FEATURES
- Adjustable nozzle assures that the amount of sand can be regulated as required
- When the handle is activated, the airflow sucks the sand up out of the container and is ejected from nozzle at high speed
(0 reviews) -
Speciality ToolsSP TOOLS Self-Igniting Professional Gas Soldering/Torch Kit
- Professional self-igniting cordless butane gas soldering iron with interchangeable tips to suit most soldering applications
- Ideal for various applications in automotive repairs, electrical/electronic circuit repair, light gauge welding, brazing and jewellery industries.
- Lightweight and compact design, all neatly stored in heavy duty x-case.
- Fast heat-up for increased productivity with a 70 minute continuous use run time
- Can be used as a blow torch
KIT INCLUDES:
- Refillable butane gas soldering iron
- Lead free soldering wire in dispenser
- Cleaning sponge
- Heat insulated protective head cap
- Deflector attachment
- Standard Tip
- Anvil Tip
- Chisel Tip
- Knife Tip
- Needle Tip
(0 reviews) -
DetergentSP TOOLS Specialised Detergent – Pressure Washer – 2 Litre – Concrete Surface
FEATURES
- Easily breaks down oil, grime and grease
- Suitable for most heavy duty cement and masonry surface cleaning
- Heavy duty cleaner
- Spray on and hose off
- 2 Litre Bottle
(0 reviews) -
DetergentSP TOOLS Specialised Detergent – Pressure Washer – 2 Litre – General Purpose
FEATURES
- Removes and penetrates grime
- Highly concentrated formula
- Spray on and hose off
- 2 Litre Bottle
(0 reviews) -
Spray Cleaning GunsSP TOOLS Spray Cleaning Gun – 1 Litre
FEATURES
- PE tank and tube with adjustable spray/jet nozzle
- Lance with adjustable nozzle with cone
- Capacity: 1 Litre
(0 reviews) -
Spray Cleaning GunsSP TOOLS Spray Cleaning Gun – Flexible – 1 Litre
FEATURES
- PE tank and tube with adjustable spray/jet nozzle
- Flexible tube
- Lance with adjustable nozzle with cone
- Capacity: 1 Litre
(0 reviews) -
Mechanics CreepersSP TOOLS Under Bonnet Service Trolley
FEATURES
FITS UNDER THE VEHICLE’S BONNET FOR EASY ACCESS TO TOOLS & PARTS
Mobile service trolley with large steel tray that slides under the bonnet/hood to provide quick access to tools and parts
- Trolley feet fit around vehicles tyres allowing users to manoeuvre the tray over the vehicle
- Solvent resistant non-slip EVA liner on tray
- Height adjustment from 883 to 1203mm (34.6”- 47.3”) to suit most vehicles
- Corner protection bumpers
- Powder-coated metal frame for long-lasting durability
- Side compartment and 9 slots for easy quick access to frequently used tools and small parts
- 4x swivel (2x lockable) heavy duty castors
- 30kg total tray load capacity
- Allows for fast and effiecient engine servicing, ideal for any garage or shop
SPECIFICATIONS
- DIMENSIONS: 767 x 539 x 883 to 1203mm – Adjustable Height (30.1 x 21.2 x 34.6 to 47.3”)
- WEIGHT: 14.7Kg (32.4lbs)
- LOAD CAPACITY: 30kg (66.1lbs)
(0 reviews) -
Mechanics CreepersSP TOOLS Under Dash Creeper
FEATURES
- Easy access to the awkward space underneath dashboards, ensuring you work in comfort
- 6 Adjustable height settings allows use for a variety of vehicles
- Steel folding legs makes storage easy
- Highly durable, PVC backboard
- Capacity: 130Kg
SPECIFICATIONS
- Backboard: 1000(L) x 260(W) x 50(H)mm
- Support Height: 500 – 700mm
(0 reviews) -
Mobile Seats & StoolsSP TOOLS Workshop Seat – 3 Drawers – 888 Series
FEATURES
- 888 Series
- Heavy duty frame
- High density foam padded seat
- Ball bearing slide drawers
- Easy access spray can holder
- Swivel castors
SPECIFICATIONS
- 370 x 400 x 367 (mm)
- Drawers (3): 190 x 300 x 40mm
(0 reviews) -
ElectricalSYKES PICKAVANT Butane Soldering Iron Kit – 9 Piece
- Three features in one kit: Soldering Iron, Hot Torch & Hot Blower
- Includes 8 accessories and attachments for all soldering applications
- See-through viewing window provides an accurate level of remaining butane
- Stainless steel butane tank for extra strength and durability
- Piezo ignition with adjustable flow and constant flame capability
- Inbuilt stand and child safety latch
- Tool case doubles as a workstation to securely hold the soldering iron and solder dispenser
- Please note: This kit is not supplied or filled with butane gas
ATTRIBUTES
Burning Time 60 min Butane Storage Capacity 15ml Flame Temperature 1300C max Fuel Type Butane Hot Air Temperature 600C Max Soldering Temperature 450C max (0 reviews) -
GeneralSYKES PICKAVANT Professional Diamond Tipped Mini Engraver
- Handy pocket engraver easily marks glass, ceramic, plastic and hardened metals
- Long lasting diamond tip
- Suitable for personalising toys, sport equipment, tools, appliances, gifts and trophies
ATTRIBUTES
Battery Type 2 X AAA (Supplied) Length 155mm Tip 1.1mm Dia Weight 50g (0 reviews) -
Trolleys & CreepersTQB BRANDS 3 in 1 Creeper Seat
Maximize your efficiency and comfort with the TradeQuip 3-in-1 Creeper Seat. Engineered for the “Made for the Trade” professional, this heavy-duty tool transitions seamlessly between a full-length low-profile creeper, a stable mechanics seat, and a supportive mid-position chair. Whether you are sliding under a chassis or detailing a bumper, this unit provides the ergonomic support needed for long hours in the shop.
Features
- Low-profile for better clearance
- 6 swivel casters for easy movement
- Thick padded seat & backrest
- Folds to creeper, seat or mid-position
Specifications
- Safe working capacity: 150kg
- Castors: 6 x swivel castors
- Dimensions: 1040L x 680W x 130H mm
- Net Weight: 12kg
- Gross Weight: 13kg
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use jack stands.
(0 reviews) -
Workshop Presses & AccessoriesTQB BRANDS Adaptor Kit For Hydraulic Press
The Borum Hydraulic Press Adaptor Kit includes 8 different sized pins (mandrels) ranging from 2,000kg to 20,000kg capacity, a pin holder, a storage shelf along with a mounting kit, and a pin plate with the weight capacity shown for each pin. This very handy set of eight steel mandrels, adaptor and press plate expands the uses of your workshop press for a wider range of applications involving different sized work pieces.
Kit contains; (Mandrel Length x Diameter)
- 50mm x 10mm
- 60mm x 12mm
- 60mm x 16mm
- 85mm x 18mm
- 85mm x 20mm
- 85mm x 22mm
- 110mm x 25mm
- 110mm x 30mm
- Mountable storage rack
- Adaptor Spigot Diameter: 25mm
- Weight: 7.5kg
- Carton: 310 x 205 x 115mm
BPAK compatible with the following presses: BHSP20T, BHSP30T, 2048T, 2038T, 2036T, BSP100TA & BSP75TA.
Intended Use
Designed to use in conjunction with a hydraulic workshop press when straightening, bending and pressing any component that is difficult to handle.
(0 reviews) -
Workshop Presses & AccessoriesTQB BRANDS Air/Hydraulic Press 100,000kg
This “Borum Industrial” 100,000kg Air Hydraulic Workshop Press is designed for automotive, truck, implement, fleet, and industrial repair shops where pressing, bending, straightening, forming, holding work requires high pressure hydraulics. Polished inner cylinder walls extend the life of the hydraulic seals to minimise abrasion and wear, while the cylinder ram and pistons are also polished and chromed, guided by high performance seals, wear rings and dust seals. Includes a dial gauge for dual metric/tons pressure readings.
“Borum Industrial” Air Hydraulic Workshop Presses are available in a variety of capacities and sizes. The press frames are designed for maximum strength, reliability and durability. The strong frames and powerful high-pressure hydraulics will provide years of dependable service in many applications. When components need to be removed or assembled, “Borum Industrial” hydraulic presses deliver the controlled power to safely remove and install bearings, gears, U-joints, bushings, ball joints and pulleys with precision and versatility!
Features
- Heavy-duty H-frame constructed of high-grade steel and built to exacting standards for quality and durability
- Foot operated air trigger ram travel control
- 100mm pressure gauge
- Table winch system lowers or raises the bed
- High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life
- Piston-ram is treated and polished and fitted with backup ring, preventing load from falling slowly or bypassing oil drift
- Hydraulics are powered with a high quality oil, which offers better corrosion resistance and high/low temperature flexibility, allowing the unit to operate at temperatures
- Integrated overload protection valve keeps from overloading the system
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy clean up
- Extra tall working range for versatility
- Pair of bed plates included
Specifications
- Safe Working Capacity: 100,000kg
- Working Range: 113-813mm
- Overall Height: 1848mm
- Overall Width: 1250mm
- Overall Depth: 990mm
- Bed Width: 787mm
- Bed Surface Depth: 342mm
- Piston Ram Stroke: 300mm
- Ram Diameter: 140mm
- Width Between Side Posts: 268mm
- Bed Height Settings: 6
- Operating Air Pressure: 110-125psi
- Air Inlet: 1/4″NPT
- Nett Weight: 652kg
- Crate: 2044 x 1150 x 524mm
- Gross Weight: 762kg
Intended Use
Ideal for straightening, stamping, bending and pressing any component that is difficult to handle.
(0 reviews) -
Workshop Presses & AccessoriesTQB BRANDS Air/Hydraulic Press 30,000kg
This TQ Pro “Latest Technologies” 30,000kg Air Hydraulic Workshop Press is capable of bending, pressing or extruding and makes light work of installing ball joints, U-joints and pulleys – making it ideal for many automotive and industrial applications. Polished inner cylinder walls extend the life of the hydraulic seals to minimise abrasion and wear, while the cylinder ram and pistons are also polished and chromed, guided by high performance seals, wear rings and dust seals. Includes a dial gauge for dual metric/tons pressure readings. The strong frames and powerful high-pressure hydraulics will provide years of dependable service in many applications. When components need to be removed or assembled, TQ Pro “Latest Technologies” hydraulic presses deliver the controlled power to safely remove and install bearings, gears, U-joints, bushings, ball joints and pulleys with precision and versatility! This 30,000kg Air Hydraulic Workshop Press features a fast-pump core that allows the pressure head assembly to lower and make contact with the work piece more quickly than the slow-pump core. The ram cylinder glides across the width of the upper frame allowing off-centre pressing.
Includes a set of mandrill pressing attachments.
Features:
- Premium-grade steel built to exacting standards for quality and durability
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy clean up
- High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life
- Hydraulics are powered with a high quality oil, which offers better corrosion resistance and high/low temperature flexibility
- Foot Operated air trigger ram travel control
- Bed winch with swivel handle
- Integrated overload protection valve keeps from overloading the system
- Extra-long handle included for easy pumping force
- Foot pedal for pneumatic operation
- Handy removable parts tray
- Includes a set of mandrill pressing attachments
Specifications:
- Safe Working Capacity: 30,000kg
- Working Range: 25-850mm
- Overall Height: 1800mm
- Overall Width: 770mm
- Overall Depth: 505mm
- Bed Outside: 164mm
- Bed Inside: 148mm
- Bed Width: 600mm
- Clear Pressing Space: 167 x 280mm
- Ram Sideways Movement: 200mm
- Piston Ram Stroke: 145mm
- Screw Adjustment: 75mm
- Ram Diameter: 55mm
- Bed Height Settings: 6
- Nett Weight: 163kg
- Crate: 1750 x 840 x 320mm
- Gross Weight: 178kg
Intended Use
For specialist professional straightening, bending & pressing. Removing and installing gears, bearings and bushings.
(0 reviews) -
Workshop Presses & AccessoriesTQB BRANDS Air/Hydraulic Press 45,000kg
This “TradeQuip “Made for the Trade” 45,000kg Air Hydraulic Workshop Press is perfect for straightening, stamping, bending and pressing any component that is hard to handle. With it’s very wide 826mm bed width and 195mm inside bed gap this press becomes one of the most diverse Workshop Press in the TradeQuip range. Polished inner cylinder walls extend the life of the hydraulic seals to minimise abrasion and wear. A polished and chromed cylinder ram and piston is guided by top quality performance seals, wear rings and dust seals. The ram is powered by a manual two-speed pump, and the non-slip bed winch features a steel cable roller for easy raising and lowering of the press bed. Featuring an integrated overload protection valve, the hydraulic system features an onboard extra long handle for easy manual pumping force when not in pneumatic mode. For maximum safety and ease of use this air hydraulic system has been equipped with a foot operated air trigger for ultimate versatility. This TradeQuip “Made for the Trade” Workshop Press also becomes more efficient the most with it’s smooth and safe hand winch for fast and easy press bed height adjustment and the double spring ram return for fast ram retraction. Designed with a superior quality oil filled dial gauge for accurate dual metric/tons pressure readings. (Previous models include product code/s; TQHP50A)
“TradeQuip “Made for the Trade” Hydraulic Workshop Presses are available in a variety of capacities and sizes. The all-welded steel press frames are designed for maximum strength, reliability and durability, provide optimum rigidity to prevent flexing under maximum load. These strong frames and powerful high-pressure hydraulics will provide years of dependable service in most industrial applications. When components need to be removed or assembled, “TradeQuip “Made for the Trade” hydraulic presses deliver the controlled power to safely remove and install bearings, gears, U-joints, bushings, ball joints and pulleys with precision and versatility!
Features:
- Heavy-duty frame constructed of high-grade steel and built to exacting standards for quality and durability
- Foot operated air trigger ram travel control
- 100mm pressure gauge
- Polished pneumatic aluminium air motor with polyurethane double seal setup
- Bed winch for easy raise and lower adjustment
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy cleanup
- High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life
- Piston-ram is treated and polished and fitted with backup ring, preventing load from falling slowly or bypassing oil drift
- Hydraulics are powered with a high quality oil, which offers better corrosion resistance and high/low temperature flexibility, allowing the unit to operate at temperatures
- Includes hand winch for fast and easy press bed height adjustments
- Integrated overload protection valve keeps from overloading the system
- Double spring ram return for fast ram retraction
Specifications:
- Safe Working Capacity: 45,000kg
- Working Range: 159-859mm
- Overall Height: 1707mm
- Overall Width: 1420mm
- Overall Depth: 800mm
- Width Between Side Posts: 186mm
- Bed Surface Depth: 359mm
- Bed Inside: 195mm
- Bed Width: 826mm
- Piston Ram Stroke: 190mm
- Ram Diameter: 90mm
- Bed Height Settings: 6
- Operating Air Pressure: 110-125 psi
- Nett Weight: 301kg
- Carton: 1900 x 1040 x 500mm
- Gross Weight: 340kg
Intended Use
Ideal for straightening, stamping, bending and pressing any component that is difficult to handle.
(0 reviews) -
Workshop Presses & AccessoriesTQB BRANDS Air/Hydraulic Press 50,000kg
This TQ Pro “Latest Technologies” 50,000kg Air Hydraulic Workshop Press is capable of bending, pressing or extruding and makes light work of installing ball joints, U-joints and pulleys – making it ideal for many automotive and industrial applications. Polished inner cylinder walls extend the life of the hydraulic seals to minimise abrasion and wear, while the cylinder ram and pistons are also polished and chromed, guided by high performance seals, wear rings and dust seals. Includes a dial gauge for dual metric/tons pressure readings. The strong frames and powerful high-pressure hydraulics will provide years of dependable service in many applications. When components need to be removed or assembled, TQ Pro “Latest Technologies” hydraulic presses deliver the controlled power to safely remove and install bearings, gears, U-joints, bushings, ball joints and pulleys with precision and versatility! This Top Quality 50,000kg Hydraulic Workshop Press features a fast-pump core that allows the pressure head assembly to lower and make contact with the work piece more quickly than the slow-pump core. The ram cylinder glides across the width of the upper frame allowing off-centre pressing. (Previous models include product code/s; BPROSP50T)
Includes a set of mandrill pressing attachments.
Features:
- Premium-grade steel built to exacting standards for quality and durability
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy clean up
- High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life
- Hydraulics are powered with a high quality oil, which offers better corrosion resistance and high/low temperature flexibility
- Foot Operated air trigger ram travel control
- Bed winch with swivel handle
- Integrated overload protection valve keeps from overloading the system
- Extra-long handle included for easy pumping force
- Foot pedal for pneumatic operation
- Handy removable parts tray
- Includes a set of mandrill pressing attachments
Specifications:
- Safe Working Capacity: 50,000kg
- Working Range: 80-780mm
- Overall Height: 1900mm
- Overall Width: 930mm
- Overall Depth: 535mm
- Bed Inside: 200mm
- Bed Width: 750mm
- Clear Pressing Space: 224 x 280mm
- Ram Sideways Movement: 200mm
- Piston Ram Stroke: 145mm
- Screw Adjustment: 75mm
- Ram Diameter: 68mm
- Bed Height Settings: 6
- Nett Weight: 243kg
- Crate: 1900 x 1000 x 450mm
- Gross Weight: 258kg
Intended Use
For specialist professional straightening, bending & pressing. Removing and installing gears, bearings and bushings.
(0 reviews) -
Workshop Presses & AccessoriesTQB BRANDS Air/Hydraulic Press 50,000kg
This “TradeQuip “Made for the Trade” 50,000kg Air/Manual Workshop Press is perfect for straightening, stamping, bending and pressing any component that is hard to handle. With it’s very wide 713mm bed width and 210mm inside bed gap this press becomes one of the most diverse Workshop Presses in the TradeQuip range. The ram is powered by a manual two-speed pump, and the non-slip bed winch features a steel cable roller for easy raising and lowering of the press bed.
Features:
- Heavy-duty frame constructed of high-grade steel and built to exacting standards for quality and durability
- Hand operated air trigger ram travel control
- 100mm pressure gauge
- Polished pneumatic aluminium air motor
- Bed winch for easy raise and lower adjustment
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy cleanup
- High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life
- Piston-ram is treated and polished and fitted with backup ring, preventing load from falling slowly or bypassing oil drift
- Hydraulics are powered with a high quality oil, which offers better corrosion resistance and high/low temperature flexibility, allowing the unit to operate at temperatures
- Integrated overload protection valve keeps from overloading the system
- Double spring ram return for fast ram retraction
Specifications:
- Safe Working Capacity: 50,000kg
- Working Range: 137-837mm
- Overall Height: 1700mm
- Overall Width: 1290mm
- Overall Depth: 745mm
- Bed Outside: 356mm
- Bed Inside: 210mm
- Bed Width: 713mm
- Piston Ram Stroke: 190mm
- Ram Diameter: 95mm
- Bed Height Settings: 6
- Operating Air Pressure: 110-125 psi
- Nett Weight: 271kg
- Carton: 1900 x 945 x 490mm
- Gross Weight: 305kg
Intended Use
Ideal for straightening, stamping, bending and pressing any component that is difficult to handle.
(0 reviews) -
Workshop Presses & AccessoriesTQB BRANDS Air/Hydraulic Press 75,000kg
This “Borum Industrial” 75,000kg Air Hydraulic Workshop Press is designed for automotive, truck, implement, fleet, and industrial repair shops where pressing, bending, straightening, forming, holding work requires high pressure hydraulics. Polished inner cylinder walls extend the life of the hydraulic seals to minimise abrasion and wear, while the cylinder ram and pistons are also polished and chromed, guided by high performance seals, wear rings and dust seals. Includes a dial gauge for dual metric/tons pressure readings.
“Borum Industrial” Air Hydraulic Workshop Presses are available in a variety of capacities and sizes. The press frames are designed for maximum strength, reliability and durability. The strong frames and powerful high-pressure hydraulics will provide years of dependable service in many applications. When components need to be removed or assembled, “Borum Industrial” hydraulic presses deliver the controlled power to safely remove and install bearings, gears, U-joints, bushings, ball joints and pulleys with precision and versatility! (Previous models include product code/s; 1242)
Features:
- Heavy-duty H-frame constructed of high-grade steel and built to exacting standards for quality and durability
- Foot operated air trigger ram travel control
- 100mm pressure gauge
- Table winch system lowers or raises the bed
- High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life
- Piston-ram is treated and polished and fitted with backup ring, preventing load from falling slowly or bypassing oil drift
- Hydraulics are powered with a high quality oil, which offers better corrosion resistance and high/low temperature flexibility, allowing the unit to operate at temperatures
- Integrated overload protection valve keeps from overloading the system
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy cleanup
- Extra tall working range for versatility
- Pair of bed plates included
Specifications:
- Safe Working Capacity: 75,000kg
- Working Range: 170-884mm
- Overall Height: 1925mm
- Overall Width: 1340mm
- Overall Depth: 800mm
- Bed Width: 800mm
- Bed Surface Depth: 279mm
- Piston Ram Stroke: 250mm
- Ram Diameter: 125mm
- Width Between Side Posts: 217mm
- Bed Height Settings: 8
- Operating Air Pressure: 110-125psi
- Nett Weight: 451kg
- Crate: 2110 x 1100 x 430mm
- Gross Weight: 498kg
Intended Use
Ideal for straightening, stamping, bending and pressing any component that is difficult to handle.
(0 reviews) -
Porta Powers & Panel RepairTQB BRANDS Air/Hydraulic Pump 10,000psi
This “TradeQuip Made for the Trade” hand or foot hydraulic air pump is designed to operate pneumatically. It is an ideal power source for various body, frame and alignment applications and can be used with different ram kits, shop presses and hydraulic pullers (not included) that operate with a hydraulic oil pressure requirement of up to 10,000 psi. Constructed for safety, durability and high-flow oil delivery, this air hydraulic pump will deliver high-quality performance in addition to fine metering capabilities that provide more precise control. This heavy duty TradeQuip Air-hydraulic Pump connects via a 1/4″ NPT air nipple and a 3/8″ NPT hydraulic hose adaptor.
Hydraulic hose and adaptor kit not included. Available separately use Product Code: EH-8206F
Features
- Durable light-weight corrosion-free aluminium
- Built-in overload system prevents pump from being used beyond its safety capacity
- Ergonomic hand/foot activation lever
- Air/oil filters minimise contaminants in hydraulic system
- Perfect for porta power rams and bead breakers
- Compact design fits in service truck storage boxes
- Air exhaust muffler for quiet operation
Specifications
- Maximum Output Pressure: 10,000psi
- Usable Hydraulic Fluid Capacity: 1.6 Litres
- Operating Air Pressure: 90-145 psi
- Air Consumption: 7.5CFM @ 100 psi
- Oil Delivery with No Load: 49.5 cu.in/min
- Oil Delivery with Load: 7.6 cu.in/min
- Input (Air) port thread: 1/4″ -18 NPT
- Output (Oil) port thread: 3/8″ -18 NPT
- Weight: 8kg
- Carton: 300 x 170 x 205mm
Hydraulic hose and adaptor kit not included – Available separately use Product Code: EH-8206F
Intended Use
For medium duty applications when compressed air is used in conjunction with a good quality manual hydraulic pump.
(0 reviews) -
Workshop Presses & AccessoriesTQB BRANDS Air/Manual Workshop Press 45,000kg
Dominate the most demanding workshop tasks with this eQuipt “Designed to Deliver” industrial-grade powerhouse of a press, designed to deliver massive pressing force with smooth, effortless precision. Featuring a versatile dual manual and air-powered hydraulic system, it offers the ultimate flexibility to switch between rapid positioning and controlled, high-capacity pressure. Built for durability and ease of use, the integrated bed winch and rugged, dirt-resistant finish ensure your shop stays productive and professional even under the heaviest workloads.
Features:
- Hydraulics are powered with a high quality oil
- 100mm pressure gauge
- Integrated overload protection valve keeps from overloading the system
- Lead-free paint finish is oil, grease and dirt-resistant for easy cleanup and to help prevent rust
- Bed winch for fast adjustment
Specifications:
- Safe working capacity: 45,000kg
- Working range: 144-984mm
- Operating Air Pressure: 110-125 psi
- Overall Dimensions (including Winch & Pump): 1320(L) x 745(D) x 1744(H) mm
- Bed Dimensions: 710(L) x 320(D) mm
- Working Bed Gap: 520mm x 162mm
- Press Spigot Diameter: 53mm
- Weight: 245kg
Intended Use
For specialist professional straightening, bending & pressing. Removing and installing gears, bearings and bushings.
(0 reviews)
