Hand Tools
Showing 217–252 of 1807 results
-
TapesCHEMTOOLS Hydrolube Stainless Steel Grade PTFE Thread Seal Tape (Grey)
Hydrolube Stainless Steel Grade PTFE Thread Seal Tape (Grey)
Hydrolube Stainless Steel Grade PTFE Thread Seal Tape is a premium, high density tape of 1.2g/cm3Â for use on stainless steel threads. Made of 100% virgin PTFE material, it offers superior chemical resistance to most common chemicals and is ideal for sealing threaded pipe connections between 12.7mm (1/2 inch) and 50.8mm (2 inches) in diameter.
Withstanding extreme operating temperatures between -268oC and +260oC, the grey colour of the tape provides a visual indication to signify its suitability for stainless steel applications, but also shares compatibility with plastic pipe fittings.
Meets Military Specification: MIL-T-27730 (Polytetrafluorethylene Tape for use on Liquid and Gaseous Oxygen Systems)
Further Information:
PTFE is a polytetrafluoroethylene tape commonly used in plumbing applications for sealing pipe threads. It lubricates, allowing for a deeper seating of the threads, thereby helping to prevent the threads from seizing when being unscrewed. The tape also works as a deformable filler and thread lubricant, helping to seal the joint without hardening or making it more difficult to tighten – instead, making it easier to tighten.
PTFE Thread Seal Tape is commonly used commercially in applications including pressurised water systems, central heating systems, and air compression equipment. It is designed for use on tapered/pipe threads where the sealing force is a wedge action, to ensure the most effective seal for the transport of liquids, gases, steam, and hydraulic fluid through pipes made from materials such as steel, brass, PTFE, nylon, bronze, and cast iron. Tapered threads form a seal when torqued as the flanks of the threads compress against each other, as opposed to parallel/straight thread fittings or compression fittings in which the threads merely hold the pieces together and do not provide the seal.
Tapered threads provide the mechanical strength, however, the main disadvantage is that voids in the connection can still remain once the mating threads are drawn together, resulting in the potential for leakage and galling, especially since there is no other sealing mechanism besides the thread themselves. Thread seal tape is thus required to seal any spiral leak paths or voids that may exist between threads on the fitting and the port, while also limiting corrosion on the threads, which otherwise can make future disassembly nearly impossible.
(0 reviews) -
TapesCHEMTOOLS Hydrolube Universal PTFE Thread Seal Tape (White)
Hydrolube Universal PTFE Thread Seal Tape (White)
Hydrolube Universal PTFE Thread Seal Tape is an economical mid-density tape of 0.8g/cm3Â which is generally used as an allrounder, and for less critical applications. Made of 100% virgin PTFE material, it is resistant to most common chemicals and is ideal for sealing threaded pipe connections up to 9.5mm (3/8 inch) in diameter, while withstanding extreme operating temperatures between -268oC and +260oC.
Further Information:
PTFE is a polytetrafluoroethylene tape commonly used in plumbing applications for sealing pipe threads. It lubricates, allowing for a deeper seating of the threads, thereby helping to prevent the threads from seizing when being unscrewed. The tape also works as a deformable filler and thread lubricant, helping to seal the joint without hardening or making it more difficult to tighten – instead, making it easier to tighten.
PTFE Thread Seal Tape is commonly used commercially in applications including pressurised water systems, central heating systems, and air compression equipment. It is designed for use on tapered/pipe threads where the sealing force is a wedge action, to ensure the most effective seal for the transport of liquids, gases, steam, and hydraulic fluid through pipes made from materials such as steel, brass, PTFE, nylon, bronze, and cast iron. Tapered threads form a seal when torqued as the flanks of the threads compress against each other, as opposed to parallel/straight thread fittings or compression fittings in which the threads merely hold the pieces together and do not provide the seal.
Tapered threads provide the mechanical strength, however, the main disadvantage is that voids in the connection can still remain once the mating threads are drawn together, resulting in the potential for leakage and galling, especially since there is no other sealing mechanism besides the thread themselves. Thread seal tape is thus required to seal any spiral leak paths or voids that may exist between threads on the fitting and the port, while also limiting corrosion on the threads, which otherwise can make future disassembly nearly impossible.
(0 reviews) -
Dispensing, Caulking & Sausage GunsCHEMTOOLS Pneumatic Sausage Gun
This Pneumatic Sausage Gun comes with a built-in, fully adjustable pressure regulator for constant force and speed. It is perfectly balanced by an ergonomic handle, and manufactured with a tough aluminium body and ring nuts, providing high resistance over time. Its quick release trigger ensures extrusion is immediately stopped, preventing wastage and application outside the desired area.
This pneumatic gun is designed to deliver a smooth, uninterrupted flow, effortless dispensing, and hassle-free application of multiple adhesives and sealant types.
Sound Level: < 70 DB
Max Operating Pressure: Approx. 90 – 120 psi
Minimum Hose Size: 10mm(0 reviews) -
Dispensing, Caulking & Sausage GunsCHEMTOOLS Professional Grade Caulking Gun
The DCT-DG8310-2 Professional Grade Caulking Gun with a 8:1 thrust ratio features a premium powder-coated metal body and a full-sized aluminium handle with ergonomic grip. Its half cradle makes it easy to install and remove cartridges, and its light weight is perfect for applications of standard viscosity materials such as acrylics, MS polymers, silicones, and polyurethane sealants.
Weight: 385g
Dimensions: 360mm x 210mm x 60mm(0 reviews) -
Dispensing, Caulking & Sausage GunsCHEMTOOLS Professional Grade Sausage & Bulk Caulking Gun
The DCT-DG8600-2 Professional Grade Sausage & Bulk Caulking Gun with 12:1 thrust ratio is perfect for the application of standard materials such as acrylic, silicone, and polyurethane. It is manufactured with a strong and highly durable aluminium barrel, with an easy release, corrosion resistant spring-loaded trigger handle and aluminium cap.
This caulking gun is engineered for smooth and precise material delivery and will satisfy even the most demanding professional with its light-weight body, great results, and easy disassembly for cleaning.
Weight: 585g
Dimensions: 555mm x 520mm x 340mmCompatible with Rapidstick™ PITBULL 201 Dura-Flex Hybrid Sealant, 600g Sausage
(0 reviews) -
BrushwareCHEMTOOLS Rapidstickâ„¢ Disposable Acid Brush
Rolled tin handle. Horse hair bristles. Handy and economical. Great for once-only use with glues, solvents, acids, fluxes, greases, and other coatings. Ideal for touch-ups, dusting, and most odd workshop jobs. Available in packs of 12 or boxes of 144. Not available separately.
• Handle Length: 135mm
• Full Length: 154mm
• Brush Size: 19mm (L) x 12mm x 8mmRefer to diagram (left) for further measure
(0 reviews) -
BrushwareCHEMTOOLS Rapidstickâ„¢ Double-Ended Chisel Applicator Brush
Stainless Steel handle. Horse hair bristles. Chiseled on a 30 degree angle at one end for heavy duty scrubbing and better reach into tight corners. Straight bristles at the opposite end for application of liquids.
• Handle Length: 115mm
• Full Length: 136mm
• Brush Size, Chiseled End: 7mm (L) x 5mm x 4mm
• Brush Size, Straight End: 14mm (L) x 5mm x 4mm(0 reviews) -
BrushwareCHEMTOOLS Rapidstickâ„¢ Double-Ended Chisel Scrubbing Brush
Zinc plated steel handle. Horse hair bristles. Chiseled on a 30 degree angle at one end for better reach into tight corners. Designed for heavy duty scrubbing at either end.
• Handle Length: 114mm
• Full Length: 130mm
• Brush Size, Chiseled End: 8mm (L) x 13mm x 7mm
• Brush Size, Straight End: 8mm (L) x 13mm x 9mm(0 reviews) -
BrushwareCHEMTOOLS Rapidstickâ„¢ Fibreglass Adhesive Remover Pen
Handy and versatile. Effortlessly removes dried-up adhesive.
Made from fine fibreglass threads. Customise the thread length for each application by twisting the end of the pen to increase/decrease thread exposure.
Perfect for cleaning, polishing, and burnishing applications.
Great for rust removal, contact cleaning, cleaning of pads, de-burring metal parts, and much more.
• Housing Size: 120mm long, 12mm diameter
• Thread Bundle: 4mm diameter
• Thread Length: Adjustable(0 reviews) -
BrushwareCHEMTOOLS Rapidstickâ„¢ Fine Applicator Brush
Stainless steel handle. Goat hair bristles. Designed for all purpose use but suits fine cleaning and fluid application of adhesives, solvents, acids, and other liquid coatings.
• Handle Length: 89mm
• Full Length: 93mm
• Brush Size: 4mm (L) x 5mm x 2mm(0 reviews) -
BrushwareCHEMTOOLS Rapidstickâ„¢ General Utility Brush
Multiple rows of hog hair. Extra large brush base. Great for sweeping polished surfaces. Excellent clean-up brush for wet or dry surfaces.
• Full Length: 210mm
• Brush Size: 20mm (L) x 54mm x 21mm(0 reviews) -
TapesCHEMTOOLS Rapidstickâ„¢ Pipe Repair Bandage Kit
Rapidstick™ Pipe Repair Bandage Kit is an easy to use, heavy-duty emergency kit that allows for the quick and effective permanent repair of damaged pipes requiring fast reinforcement to stop sudden leaks, cracks, or bursts. It is an essential kit for both plumbing repair specialists and DIY enthusiasts alike, and can be used to fix leaks in domestic systems, or for larger industrial pipelines. Being high performing and using high grade materials, it serves a dual purpose – for use as a temporary measure when immediate stop-leak fixes are required, or for long term peace of mind it can remain in place without needing further attention.
Providing an instant seal that prevents further leakage, minimises downtime, and halts potentially excessive damage, the strong and flexible highly durable bandage is made from corrosion-resistant material and can withstand high pressure and extreme temperatures. After cure, it is resistant to a wide range of diluted chemicals and fuels, including acids, alkalis, solvents, and oils, ensuring compatibility with different pipe systems.
The 3-piece water activated kit includes all the necessary components for a straightforward application. It can be used on various types of pipes, including metal, plastic, and rubber, with diameters ranging from small household pipes to larger industrial or commercial lines. When applied correctly the bandage forms a permanent long-lasting seal, offering a reliable solution until proper repairs can be implemented.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
TapesCHEMTOOLS Rapidstickâ„¢ Polyimide Adhesive Tape
Rapidstickâ„¢ Polyimide Adhesive Tape
Rapidstick™ Polyimide Adhesive Tape, made from polyimide film and a cross-linked silicone adhesive, is a flame and heat resistant high temperature tape designed for both permanent and temporary bonding. It is suitable for wide variety of applications in the automotive, aerospace, and industrial manufacturing industries, including 3D printing, fibre optics, semi-conductors, smart cards, and solar panels. It can withstand high temperature powder coating and anodising operations, features an exceptionally thin backing that leaves no residue or stain upon removal, and resists punctures, abrasion, and tearing – but can be trimmed easily with a sharp razor blade.
Polyimide Adhesive Tape is ideal for electrical and thermal insulation in demanding electrical and electronic environments, effectively used in hand soldering and mass soldering applications, including wave soldering. Common uses in these industries include:
• Adhering ABS and PLA to heat beds
• Temporary securing of components
• Wire and cable wrapping
• Masking gold contacts during soldering
• Preventing unwanted electrical connections
• Insulating coil from high temperaturesPolyimide Adhesive Tape is high performing with excellent solvent, acid, and oil resistance, minimal shrinkage after baking, high vibration resistance, and unique mechanical properties such as a wide temperature range (-75°C to 260°C) and high dielectric strength.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BrushwareCHEMTOOLS Rapidstickâ„¢ Reusable Acid Brush
Zinc plated steel handle. Horse hair bristles. Chiseled on a 30 degree angle at one end for better reach into tight corners. Designed for heavy duty scrubbing at either end.
• Handle Length: 114mm
• Full Length: 134mm
• Brush Size: 20mm (L) x 15mm x 13mm(0 reviews) -
BrushwareCHEMTOOLS Rapidstickâ„¢ Scratch Brush
3 rows of stiff hog hair bristles. Great for the removal of sticky glues or crusty materials. Use wet or dry.
• Full Length: 195mm
• Brush Size: 12mm (L) x 36mm x 8mm(0 reviews) -
TapesCHEMTOOLS Rapidstickâ„¢ Self Fusing Silicone Repair Tape
Rapidstickâ„¢ Self Fusing Silicone Repair Tape
Rapidstick™ Self Fusing Silicone Repair Tape is an excellent sealant for plumbing, vents, and ducts under stress from extreme conditions and environments. It offers high tensile and dielectric strengths, remaining flexible in temperatures as low as -62°C.
Made from high grade stretchable silicone which will not become gummy over the course of time, Silicone Repair Tape insulates immediately upon stretching and wrapping to form an air-tight and waterproofed seal. It remains tear and abrasion resistant and will withstand heat up to 260°C. Removal by razor can occur after full cure (24 hours), without leaving any sticky surface residues behind.
Features & Benefits:
– Non-flammable
– Absorbs vibration
– Resists acids, fuels, oils, salt water, UV rays, and many solvents
– Withstands pressure, voltage, moisture, corrosion, and many contaminantsOther Recommended Uses:
☑ Adding grip to tools and sports equipment
☑ Connecting wire harnesses
☑ Wrapping cables
☑ Securing boat and RV hookups(0 reviews) -
Brushware
CHEMTOOLS Rapidstickâ„¢ Soft Brass Brush
Heavy duty triple row cleaning brush. Secured high grade brass steel bristles. Removes chemical build-up and flux deposits. Ideal for cleaning hot soldering tips without damage.
• Full Length: 195mm
• Brush Size: 12mm (L) x 26mm x 8mm(0 reviews) -
BrushwareCHEMTOOLS Rapidstickâ„¢ Vertical Scrubbing Brush
Strong, wide, hardwood handle. Double row of hog hair bristles. Ideal for dusting and general clean-up. Use wet or dry.
• Handle Length: 126mm
• Full Length: 139mm
• Brush Size: 13mm (L) x 24mm x 10mm(0 reviews) -
Dispensing, Caulking & Sausage GunsCHEMTOOLS Ratchet Propelled Twin Piston Cartridge Mixing Gun
(Suitable for 50ml Dual Cartridges, 10:1 Ratio)
The DCT-DG8050-110 Ratchet Propelled Twin Piston Cartridge Mixing Gun is specially designed for 50ml 10:1 dual component dispensing cartridges of MMA, Acrylic Cement, Epoxy, or PU. Its heavy duty housing is constructed from high impact light-weight plastic for durability and easy portability, and its twin pistons are designed to provide an even and reliable flow for consistent and precise dispensing.
As a manual, no-mess, easy clean-up solution to 2 component dispensing, the DCT-DG8050-110 demonstrates reduced extrusion resistance and is well suited for many assembly operations in a wide sector of markets, including aerospace, electronics, construction, and automotive.
(0 reviews) -
Dispensing, Caulking & Sausage GunsCHEMTOOLS Ratchet Propelled Twin Piston Cartridge Mixing Gun
(Suitable for 50ml Dual Cartridges, 1:1 & 2:1 Ratio)
The DCT-DG8050-11 Ratchet Propelled Twin Piston Cartridge Mixing Gun is specially designed for 50ml 1:1 and 2:1 dual component dispensing cartridges of MMA, Acrylic Cement, Epoxy, or PU. Its heavy duty housing is constructed from high impact light-weight plastic for durability and easy portability, and its twin pistons are designed to provide an even and reliable flow for consistent and precise dispensing.
As a manual, no-mess, easy clean-up solution to 2 component dispensing, the DCT-DG8050-11 demonstrates reduced extrusion resistance and is well suited for many assembly operations in a wide sector of markets, including aerospace, electronics, construction, and automotive.
(0 reviews) -
TapesCHEMTOOLS Thermalleâ„¢ HEATFLEX High Temperature Polyimide Tape
Thermalleâ„¢ HEATFLEX High Temperature Polyimide Tape
Thermalleâ„¢ HEATFLEX High Temperature Polyimide Tape, made from polyimide film and a cross-linked silicone adhesive, is radiation, flame, solvent, acid, moisture, and heat resistant, and designed for both permanent and temporary bonding. It offers excellent electrical and thermal insulation in demanding environments, and features an exceptionally thin backing that leaves no residue or stain upon removal.
HEATFLEX resists punctures, abrasion, and tearing, and is suitable for use in a vaccum environment. It has minimal shrinkage after baking, high vibration resistance, and unique mechanical properties, including a wide temperature range and high dielectric strength.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Mixing Nozzles & Dispensing TipsCHEMTOOLS Twist Lock Helical Static Mixing Nozzle
(1:1 Ratio, Suitable for 25ml & 50ml Dual Cartridges)
The Twist Lock Helical Static Mixing Nozzle contains 16 heavy duty polypropylene mixing elements within the shaft to ensure a perfect mix of both components. The tapered and stepped Quadro square nozzle allows for dispensing directly onto surfaces to be glued, or, for larger beads, it may be cut to suit the size of the bead required. A luer lock needle tip may also be added for dispensing into tight spaces, or when smaller beads are required.
The square geometry of the inner core consists of a series of alternating left- and right-hand elements with intermittent flow inverters. These provide consistent, high quality mixing, effectively channelling the material from the walls into the center of the mixer, and from the center out to the walls.
8-MXN-TL-25 is specially designed for use with most 1:1 two-part/dual component cartridges. The used nozzle may be left on the cartridge between uses to provide a tight seal and protect from exposure to air and humidity once the material within the shaft cures.
(0 reviews) -
Mixing Nozzles & Dispensing TipsCHEMTOOLS Twist Lock Helical Static Mixing Nozzle
(10:1 Ratio, Suitable for 50ml Dual Cartridges)
The Twist Lock Helical Static Mixing Nozzle contains 24 heavy duty polypropylene mixing elements within the shaft to ensure a perfect mix of both components. The smooth, tapered nozzle allows for dispensing directly onto surfaces to be glued, while its rounded shape ensures an easy fit into tight spaces.
The spiralling/bow-tie elements of the inner core repeatedly divide and combine both materials in a circular flow to provide consistent, high quality intermixing, effectively channelling the material radially from the walls into the center of the mixer, and from the center out to the walls.
8-MXN-TL-50 is specially designed for use with most 10:1 two-part/dual component cartridges. The used nozzle may be left on the cartridge between uses to provide a tight seal and protect from exposure to air and humidity once the material within the shaft cures.
(0 reviews) -
Chemicals, Lubricants & AdhesivesCRC F3 Non- Drip Contact Adhesive
DESCRIPTION
CRC F3 is a thixotropic, high strength contact adhesive. It is formulated to be non-spill and non-drip, giving greater control of application and better coverage. This gel feature makes it ideal for vertical and ceiling applications and for bonding onto porous surfaces, e.g. Gib board. CRC F3 will not soak in as other liquid adhesives do, giving excellent results on porous surfaces such as the end grain of particle board. CR F3 has good resistance to heat, water, acids and alkalis, essential for a wide variety of commercial applications.Applications
Use a straight edge or a notched trowel or the scraper provided. Apply an even layer of adhesive to both surfaces. Between 10-20 minutes the solvent should have evaporated and the adhesive should be tacky enough to bond the surfaces together. A useful indication is to touch the surfaces (all over) with a clean finger: if they are sticky to the touch, without transferring to your finger, they are ready to bond together. It is imperative that no solvent is trapped between Position components accurately, as when contact is made the bond will be immediate. Apply maximum overall instant pressure, taking care to expel any air bubbles, to ensure a complete bond. Use of a hand pressure roller, e.g. a vinyl flooring roller, provides good direct pressure.
Features/Benefits:
Thixotropic – Ideal for vertical and porous surfaces Non-spill, Non-drip – Greater control of application and better coverage Resilient – Good resistance to heat, water, acids and alkalis
(0 reviews) -
Packaging SuppliesDYMARK Crimper Poly Prop 12mm PSL12 Light Duty
Polypropylene Strapping Tools
- Dispenser – ideal for quick and easy roll changes
- Crimpers – designed to crimp metal, snap-on and polypropylene seals
- Tensioners – adjustable width cutting and tensioning tool that will work in any position
(0 reviews) -
Packaging Supplies
DYMARK Crimper Poly Prop 15mm
Polypropylene Strapping Tools
- Dispenser – ideal for quick and easy roll changes
- Crimpers – designed to crimp metal, snap-on and polypropylene seals
- Tensioners – adjustable width cutting and tensioning tool that will work in any position
(0 reviews) -
Packaging SuppliesDYMARK Heavy Duty Stretchwrap Handle
Hand Stretchwrap & Accessories- Durable polyethylene stretch film
- Excellent puncture resistance
- Useful in stabilising sharp or bulky objects
- Black stretchwrap is ideal for concealing the contents of a pallet (deterring theft during storage and transport)
(0 reviews) -
Packaging SuppliesDYMARK Metal Seals Bright For Steel Strapping
500 Per Box
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Packaging SuppliesDYMARK Poly Strap 15x3000m S/A Blue
Polypropylene Machine Strapping
- Available in either blue or clear
- Suitable for use with automatic or semi-automatic strapping machines
(0 reviews) -
-
Packaging SuppliesDYMARK Strapping 19mmX1000m PP/HD
Heavy Duty Poly Hand Strapping
- Easy to apply and remove
- Lightweight and strong
(0 reviews) -
WrappingDYMARK Stretchwrap
Hand Stretchwrap & Accessories
- Durable polyethylene stretch film
- Excellent puncture resistance
- Useful in stabilising sharp or bulky objects
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Packaging SuppliesDYMARK Tape Dispenser Pistol Grip
Tape Dispenser
- Pistol grip tape dispensers
- Suitable for tapes with thickness up to 50mm
(0 reviews)
