Hand Tools
Showing 1–36 of 56 results
-
Hand ToolsGRIPPS Electrical Trade Kit
An end-to-end solution covering the entire suite of hand and power tools used by Electricians.
Tethers up to 31 tools.
Kit Contents
- 1 x H02056 Tape Measure Catch
- 1 x H10100 Bungee Tether Dual-Action 5.0kg
- 1 x H01068 Coil tether Single-Action
- 1 x H01021 Swivel Catch
- 10 x H01007 Tool Catch (Non-Conductive)
- 1 x H01010 V-Gripp Tape
- 1 x H01067 Webbing Wrist Tether Single-Action
- 1 x H01062 Coil Single-Action Wrist Tether (Non-Conductive)
- 1 x H01142 Belt-Loop Anchor
- 1 x H01085-M Slip-On Wrist Anchor (Medium)
- 10 x H01030 Screwlock Cable – 3.0mm x 12cm / 0.1″ x 4.75″
- 1 x H03048 Little Gripper Kit
(0 reviews) -
Hand ToolsKNIPEX Alligator
- Self-locking on pipes and nuts: no slipping on the workpiece and low handforce required
- Gripping surfaces with special hardened teeth, teeth hardness approx.61 HRC: high wear resistance and stable gripping
- Box-joint design: high stability due to double guide
- Robust construction, insensitive to dirt- particularly suitable for outdoor work
- Guard prevents operators’ fingers being pinched
- Chrome vanadium electric steel, forged, oil-hardened
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand ToolsKNIPEX Cable Cutter – Ratchet Action
- For cutting copper and aluminium single conductors as well as multiple stranded cables
- Not suitable for steel wire and wire ropes
- Precision ground, hardened blades
- Clean and smooth cut without crushing and deformation
- One-hand operation using ratchet principle
- Little handforce required due to very high transmission ratio
- Two-stage ratchet drive for easy cutting
- Simple handling as a result of low weight and compact design – can be used even in confined areas
- Guard prevents operators’ fingers being pinched
- High-grade special tool steel, forged, oil-hardened
- Fixed handle with support area for putting down the pliers when cutting
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand ToolsKNIPEX Cable Shears
- For cutting copper and aluminium single conductors as well as multiple stranded cables
- Not suitable for steel wire and hard drawn copper conductors
- Precision ground, hardened blades
- Clean and smooth cut without crushing and deformation
- Easy cutting with one-hand operation
- Guard prevents operators’ fingers being pinched
- Adjustable bolted joint, self-retaining screw
- High-grade special tool steel, forged, oil-hardened
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand ToolsKNIPEX Cable Shears – Surgical Steel
- Not suitable for steel wire and hard drawn copper conductors
- Precision ground, hardened blades
- No crushing, slight deformation of the cable only
- Guard prevents operators’ fingers being pinched
- Adjustable bolted joint
- Shears body: surgical steel, stainless, vaccum-hardened
- Handles: plastic, impact-proof
- With opening spring and locking device
- Blades made of stainless steel
- Oil-hardened and tempered
- Cuts cables up to 10 mm dia./ 24 mm²
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand ToolsKNIPEX Cable Shears – Tubular Handle
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand ToolsKNIPEX Cable Shears – Twin Cutting Edge
- For cutting copper and aluminium cables
- Not suitable for steel wire and hard drawn copper conductors
- Precision ground, hardened blades
- Clean and smooth cut without crushing and deformation
- By dividing the cutting actions into initial cut (insulating sheath in the front cutting area) and final cut (conductor in the back cutting area), cables up to20 mm can be cut in one-hand operation
- Less effort required due to favourable lever ratio and optimised cutting-edge geometry
- Guard prevents operators’ fingers being pinched
- Adjustable bolted joint, self-retaining screw
- High-grade special tool steel, forged, oil-hardened
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand ToolsKNIPEX Cobra VDE
- Adjustment by shifting one jaw directly on to the workpiece: fast, reliable and comfortable handling
- Opening at the touch of a button apart form the workpiece
- Fine adjustment for optimum adaptation to different sizes of workpieces and a comfortable handle width
- Good access to the workpiece due to slim size of head and joint area
- Self-locking on pipes and nuts: no slipping on the workpiece and low handforce required
- Gripping surfaces with special hardened teeth, teeth hardness approx.61 HRC: high wear resistance and stable gripping
- Box-joint design: high stability due to double guide
- Guard prevents operators’ fingers being pinched
- Chrome vanadium electric steel, forged, oil-hardened
- 250mm
(0 reviews) -
Hand ToolsKNIPEX Combination Pliers
- With gripping zones for flat and round material, suitable for versatile use
- With cutting edges for soft and hard wire
- Long cutting edges for thicker cables
- Cutting edges additionally induction hardened, cutting edge hardness approx.60 HRC
- Special tool steel, forged, oil hardened
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand ToolsKNIPEX Diagonal Cutters
- The indispensable diagonal cutter for all-round use
- High quality material and precise workmanship for long service life
- Precision cutting edges for soft and hard wire
- Clean cutting of thin copper wires, also at the cutting-edge tips
- Cutting edges additionally induction hardened, cutting edge hardness approx.62 HRC
- Narrow head style for use in confined areas
- Vanadium electric steel- forged, oil-hardened
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand ToolsKNIPEX Diagonal Cutters Electro Mechanics
- 125mm
- With sharp, precisely aligned cutting edges for soft, hard wire and piano wire
- Cutting edges additionally induction hardened, cutting edge hardness approx.63 HRC
- Lap joint
- Vanadium electric steel- forged, oil-hardened
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand ToolsKNIPEX Diagonal Cutters Fibre Optics
- Specially developed for cutting fibre optics (glass fibre cables)
- With elongated cutting edge
- Cutting face flush ground
- Cutting edges additionally induction hardened
- With opening spring
- Vanadium electric steel- forged, oil-hardened
(0 reviews) -
Hand Tools
KNIPEX Diagonal Cutters High Leverage
- For very tough, continuous use
- High cutting performance with minimum effort due to optimum co-ordination of the cutting edge angle and transmission ratio
- Precision cutting edges additionally induction hardened (cutting edge hardness approx.64 HRC), for all sorts of wire including piano wire
- Chrome vanadium heavy-duty steel, forged, oil-hardened
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand Tools
KNIPEX Diagonal Cutters X Cut
- 160mm
- Compact and 20 % less weight
- Powerful and precise
- Cuts finest strands as well as multi-core cables and piano wires
- Box-joint design: highest stability with low weight
- Doubly supported joint axis for heaviest duty
- High cutting performance with minimum effort due to optimum co-ordination of the cutting edge angle and transmission ratio.40 % less effort required compared to diagonal cutters of the same length
- Large opening width for thicker cables
- Cuts precisely, even through fine copper wires
- Compact, low-weight construction
- Universally usable, in the assembly, maintenance and production
- Chrome vanadium heavy-duty steel, forged, oil-hardened
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Cutting ToolsKNIPEX Diagonal Insulation Stripper
- With elongated cutting edge
- Improved transmission ratio for 25 % more cutting performance
- Precision stripping holes for single conductors of 1.5 and 2.5 mm²
- Convenient cutting of NYM cables up to 5 x 2.5 mm²
- Long tips for ultra fine cutting work also in confined areas
- Induction hardened precision blades, cutting edge hardness approx.60 HRC
- Vanadium electric steel- forged, oil-hardened
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand ToolsKNIPEX Dismantling Pliers
- Multifunctional – dismantling, stripping and cutting with one pair of pliers
- For time-saving dismantling and stripping of all common round and damp-proof installation cables (e.g. NYM cable)
- Simplified access especially to deep mounted flush sockets thanks to slim head design and optimally angled cable sheath cutter
- Strip cables easily and without damage thanks to circular cutting edge with depth limit
- Suitable for universal use: precision wire stripping holes for conductors from 1.5 and 2.5 mm²
- With diagonal cutters for cutting and trimming conductors, wires, small screws and nails
- All cutters additionally induction hardened to approx. 61 HRC for high wear resistance
- 30 % lighter than comparable pliers
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand ToolsKNIPEX Electricians Pliers
- The ideal pliers for cable work
- For gripping and bending wire
- For cutting soft, medium and hard wire
- Precision cutting edges additionally induction hardened, cutting edge hardness approx.60 HRC
- With precision stripping holes
- For crimping end sleeves (ferrules)
- Vanadium electric steel- forged, oil-hardened
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand ToolsKNIPEX Electronic Super Knips
- 125mm
- Precision pliers for ultra fine cutting work, e.g.in electronics and fine mechanics
- Ground, very sharp cutting edges without bevel for flush cutting
- Precision shaped tips cut wires resting on a board from 0.2 mm dia
- Joint with stainless steel rivet
- Cutting edges additionally induction hardened
- Extremely smooth movement for minimum operator fatigue
- With opening spring and opening limiter
- In INOX or special tool steel
- INOX – stainless steel
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand ToolsKNIPEX Electronic Wire Strippers
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand ToolsKNIPEX Electronics Oblique Cutting Nipper
- With cutting edges for soft and medium hard wire
- Without bevel, for flush cutting
- Cutting edges additionally induction hardened, cutting edge hardness approx.58 HRC
- Low-friction double spring for gentle and even opening
- Sturdy, zero backlash box joint
- The polish together with a fine film of oil offer effective rust protection – no circuit faults caused by peeling chrome from plated tools
- High-grade special tool steel, forged, oil-hardened
(0 reviews) -
Hand ToolsKNIPEX Flat Nose Pliers
- Flat, short, wide jaws
- Knurled gripping surfaces
- Chrome vanadium electric steel, forged, oil-hardened
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand ToolsKNIPEX High Leverage Combination Pliers
- 35% less effort required than with conventional combination pliers
- With cutting edges (hardness approx.63 HRC) for heavy duty
- Easier work due to optimised leverage
- Easier cutting, powerful gripping, bending and pulling
- Long cutting edges for thicker cables
- With gripping zones for flat and round material, suitable for versatile use
- High-grade special tool steel, forged, oil-hardened
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand ToolsKNIPEX Insulation Strippers
- 160mm
- For single, multiple and fine stranded conductors with plastic or rubber insulation max.5.0 mm dia.or resp.10.0 mm² cable cross section
- Easy adjustment to the required diameter of solid or stranded wire with knurled screw and lock nut
- Special tool steel, forged, oil-hardened
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand ToolsKNIPEX Long Nose Cutting Plier
- Elastic tips: dimensionally stable even when twisted
- Distortion-tolerant, elastic precision tips
- Half-round, long, pointed jaws
- With cutting edges (hardness approx.61 HRC) for soft, medium-hard and hard wire
- Vanadium electric steel- forged, oil-hardened
- 200mm
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand ToolsKNIPEX Long Nose Pliers
- Heavy-duty and hard-wearing gripping pliers
- Different jaw styles
- Chrome vanadium electric steel, forged, oil-hardened
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand ToolsKNIPEX Mini Stripping Tool
- Precise stripping, stepwise adjustment to the conductor diameters
- With wire cutter
- Adjustable length stop from 4.0 – 15.0 mm
- With locking device
- Housing: plastic, impact-proof
(0 reviews) -
Hand ToolsKNIPEX Needle Nose Combination Plier
- High Leverage Combination Pliers with pointed jaw
- For all common installation and repair work
- Handy use when working in confined areas thanks to slim head design and pointed jaws (anti-twist)
- Gripping surfaces with special convex contour on one side for secure gripping of flat parts
- Milled groove in the gripping area permits small parts such as nails, pins and bolts to be held and pulled
- The reliable and diverse combination pliers when out and about
- Easy cutting thanks to the high leverage joint
- With cutting edges for soft, medium-hard and hard wire
- Long service life and stable tips as the tool is forged from special high grade tool steel, manifold oil-hardened
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand ToolsKNIPEX Pliers Wrench
- Replaces the need for sets of metric and imperial spanners
- Smooth jaws for damage free installation of plated fittings – working directly on chrome!
- Adjustable tightening tool
- Also excellent for gripping, holding, pressing and bending workpieces.Zero backlash jaw pressure prevents damage to edges of sensitive components
- Push the button for adjustment on the workpiece
- Parallel jaws give a more solid grip- its design allows flexible adjustment of all widths up to the specified maximum size
- Reliable catching of the hinge bolt: no unintentional shifting
- The ratchet type principle allows quick and easy tightening and release of all bolted connections
- Lever transmission greater than 10 : 1 for strong gripping power
- Chrome vanadium electric steel, forged, oil-hardened
- The smooth jaws grip all parallel surfaces in the capacity range with a high degree of pressure if necessary and open up almost unlimited application possibilities for the pliers wrench: e.g. for tightening locknuts, exerting pressure to activate the adhesive power of contact adhesives, edge breaking in tile work, snapping cable ties, utilisation as a small vice.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand ToolsKNIPEX Round Nose Plier
- For gripping and manipulating fine wires, e.g.in jewellery work
- Ideal for cutting and bending activities, also in electronics
- For bending wire loops
- Precision-ground round jaws with fine, pointed tips
- Cutting edges additionally induction hardened, cutting edge hardness approx.60 HRC
- Vanadium electric steel- forged, oil-hardened
- 130mm
(0 reviews) -
Hand ToolsKNIPEX Round Nose Pliers
- For bending wire loops
- Round, short jaws- finely ground
- Chrome vanadium electric steel, forged, oil-hardened
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand ToolsKNIPEX Snipe Nose Radio Pliers
- Suitable for finer gripping and cutting work
- Pointed, half-round jaws
- Knurled gripping surfaces
- With cutting edges for soft, medium-hard and hard wire
- Cutting edges additionally induction hardened, cutting edge hardness approx.61 HRC
- Vanadium electric steel- forged, oil-hardened
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand ToolsKNIPEX Stepcut Cable Shears
- Cable cutting made easy: innovative step cutting separates wires one by one to save energy
- Small, light, strong: comfortable cutting withoutc rushing and just 160 mm in size
- Noticeably less effort: the gradations cut wires one after the other; cutting is up to 40 % easier than with standard cable shears of the same length!
- Ergonomic handle design: optimal cutting feel even for larger cable diameters
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand ToolsKNIPEX Stripping Knife with Ratchet Function
- Ratchet function: easy cutting even for a variety of cable sheaths
- Cuts very hard or tough plastic sheaths up to 7 mm wall thickness
- Blade with four positions: folded, straight, angled and ratcheting
- Versatile blade with three cutting areas for round and lengthwise cuts
(0 reviews) -
Hand ToolsKNIPEX Stripping Tools – Coax Cables
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand ToolsKNIPEX Stripping Tools – Fibre Optics
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand ToolsKNIPEX Stripping Tweezers
- For stripping off varnished insulation on copper wires
- Blades for other wire diameters available as spare parts
- Tweezers body: spring steel, oil-hardened
- Handle shells: plastic
(0 reviews)
