Cutting, Drilling & Abrasives
Showing 1621–1656 of 1760 results
-
BurrsSABER Burrs Express Cut Flame
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Included Angle
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Oval
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Pointed Cone
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Sets
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Tree Pointed Nose
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Tree Radius Nose
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Non-Ferrous Cut Ball
- Non-Ferrous Cut Burrs are designed for rapid stock removal with minimum chip loading resulting in longer life and reduced clogging.
- Non-Ferrous Cut Burrs are for use on non-ferrous and non-metallic materials such as aluminium, brass, copper, bronze, coarse plastic, hard rubber, reinforced plastic and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Non-Ferrous Cut Cylindrical
- Non-Ferrous Cut Burrs are designed for rapid stock removal with minimum chip loading resulting in longer life and reduced clogging.
- Non-Ferrous Cut Burrs are for use on non-ferrous and non-metallic materials such as aluminium, brass, copper, bronze, coarse plastic, hard rubber, reinforced plastic and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Non-Ferrous Cut Cylindrical with Ball Nose
- Non-Ferrous Cut Burrs are designed for rapid stock removal with minimum chip loading resulting in longer life and reduced clogging.
- Non-Ferrous Cut Burrs are for use on non-ferrous and non-metallic materials such as aluminium, brass, copper, bronze, coarse plastic, hard rubber, reinforced plastic and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Non-Ferrous Cut Included Angle
- Non-Ferrous Cut Burrs are designed for rapid stock removal with minimum chip loading resulting in longer life and reduced clogging.
- Non-Ferrous Cut Burrs are for use on non-ferrous and non-metallic materials such as aluminium, brass, copper, bronze, coarse plastic, hard rubber, reinforced plastic and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Non-Ferrous Cut Tree Radius Nose
- Non-Ferrous Cut Burrs are designed for rapid stock removal with minimum chip loading resulting in longer life and reduced clogging.
- Non-Ferrous Cut Burrs are for use on non-ferrous and non-metallic materials such as aluminium, brass, copper, bronze, coarse plastic, hard rubber, reinforced plastic and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsSABER Diamond Hole Saw
- Diamond core drills and hole saws require the use of proper lubrication, correct drill speed and proper pressure.
- Drilling methods and techniques vary significantly depending upon the material being drilled.
- To achive optimum cutting performance and maximum core drill life use a slow to very slow drill speed, low drill pressure, and plenty of water for lubrication.
- Variable speed drills work best since the correct speed can be selected.
- Diamond core drills only drill out a portion of the resulting hole so they drill much faster than conventional blunt nose drills.
- Core drills can be used on most non-ferrous hard materials such as glass, ceramic, porcelain, fibreglass, slate, marble, granite and other natural and manufactured stone materials.
- The life of any type of diamond drill depends upon the hardness, abrasiveness and thickness of the material being drilled and the specific drilling techniques used.
- Using diamond core drills in hard materials is not difficult, however drilling the hole takes time.
- You should consider that they aren’t “drilling” a hole – they are “grinding” a hole.
- SPEEDS IN RPM: Fibreglass – 1200, Glass, Ceramic and China – 800, Limestone and Marble – 600, Ceramic Tile – 600, Porcelain – 500, Granite and Comp. Stone – 400.
- DO NOT USE HAMMER ACTION.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
SetsSABER Drill & Tap Sets
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsSABER Hole Saw Kits
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsSABER Quick Change Mandrel
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
SetsSABER Tap & Die Sets
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Thread & Stud RepairSP TOOLS Automotive Rethreading Kit – 42pc
FEATURES
- Taps & dies are suitable for chasing out damaged threads and the removal of nicks/burrs without undercutting good threads
- Thread file restores damaged external threads on any diameter
- Right or left hand
(0 reviews) -
Parts BrushesSP TOOLS Bucket Parts Brush
FEATURES
- Bucket brushes” are designed for hand use in a parts washing sink or solvent container
(0 reviews) -
Burring ToolsSP TOOLS Deburring Tool (Reaming Pen)
FEATURES
- Ideal for removing burrs from holes, straight edges and curved edges
- Fitted blades are free to rotate for efficient deburring
- Large ergonomic handle with internal storage cavity for storing extra blades
- Quick change blade mechanism
- High quality high-speed steel blade stays sharp for longer
- Remove burrs from plastic, copper, aluminium & ferrous metal pipes
REPLACEMENT BLADES AVAILABLE – 10pc Replacement Blades for Deburring Tool (SP31344)
(0 reviews) -
Burring ToolsSP TOOLS Deburring Tool Set – 4pc
FEATURES
- 4 Various extra fine deburring tools for a smooth finish
- Remove burrs from plastic, copper, aluminium & ferrous metal pipes
- Pocket clip
(0 reviews) -
Parts BrushesSP TOOLS Flow-Through Parts Brush
FEATURES
- “Flow-Through” brushes are designed for parts washing sinks with circulating solvent system
- A continuous stream of solvent is delivered through the whole bristle head not just through the centre
(0 reviews) -
Drill BitsSP TOOLS High Speed Steel (HSS) Drill Bit Set – Metric – 19pc
FEATURES
- Made from high quality high speed steel (HSS) offering the best combination of strength, heat & wear resistance
- Industrial grade – extremely sharp, strong and durable
- Precision engineered parallel shank for accurate hole size
- Drills perfectly round holes in steel, brass, plastic, wood etc.
SIZES INCLUDED
- 1-10mm (0.5 Increments)
(0 reviews) -
Drill BitsSP TOOLS High Speed Steel (HSS) Drill Bit Set – Metric – 25pc
FEATURES
- Made from high quality high speed steel (HSS) offering the best combination of strength, heat & wear resistance
- Industrial grade – extremely sharp, strong and durable
- Precision engineered parallel shank for accurate hole size
- Drills perfectly round holes in steel, brass, plastic, wood etc.
SIZES INCLUDED
- 1-13mm (0.5 Increments)
(0 reviews) -
Drill BitsSP TOOLS High Speed Steel (HSS) Step Drill Bit Sets – Metric – 3pc
FEATURES
- Made from high quality high speed steel (HSS) offering the best combination of strength, heat & wear resistance
- Industrial grade – extremely sharp, strong and durable
- Precision engineered for accurate hole sizes
- Drills perfectly round holes in steel, brass, plastic, wood etc
- Two flute design provides faster, smoother and cleaner cuts
- Automatically deburrs hole as you drill
- Self-starting – No Center punching required as the bit won’t skate off target
- Each step is clearly labelled with depth diameters
SIZES INCLUDED
- 6 to 30mm (13-step bit)
- 4 to 20mm (9-step bit)
- 4 to 12mm (9-step bit)
(0 reviews) -
Drill BitsSP TOOLS High Speed Steel (HSS) Step Drill Bit Sets – SAE – 3pc
FEATURES
- Made from high quality high speed steel (HSS) offering the best combination of strength, heat & wear resistance
- Industrial grade – extremely sharp, strong and durable
- Precision engineered for accurate hole sizes
- Drills perfectly round holes in steel, brass, plastic, wood etc.
- Two flute design provides faster, smoother and cleaner cuts
- Automatically deburrs hole as you drill
- Self-starting – No Center punching required as the bit won’t skate off target
- Each step is clearly labelled with depth diameters
SIZES INCLUDED
- 3/16” to 3/4” (10-step bit)
- 1/8” to 1/2” (13-step bit)
- 1/4” to 1-1/4” (17-step bit)
(0 reviews) -
Thread & Stud RepairSP TOOLS Internal & External Thread Files – Plus Slip-On Grips – Metric & SAE
FEATURES
- Restores damaged threads
- Includes easy slip-on PVC grip
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Speciality ToolsSP TOOLS Nut Splitter Set 4pc
- Set Includes: 9-12mm, 12-16mm, 16-22mm & 22-27mm
- Splitting of seized bolts and/or over tightened bolts without damaging the thread
- Chrome molybdenum steel blades with forged high carbon steel grips
- Hardened, tempered & chrome plated for rust resistance
(0 reviews) -
Thread & Stud RepairSP TOOLS Nut Splitters
FEATURES
- Splitting of seized bolts and/or over tightened bolts without damaging the thread
- Chrome molybdenum steel blades with forged high carbon steel grips
- Hardened, tempered & chrome plated for rust resistance
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Thread & Stud RepairSP TOOLS Pitch Gauge – Metric/SAE – 52pc
FEATURES
- Designed to easily identify metric and SAE thread pitch sizes
- Range: 0-25 to 6mm
- Pitch: 4 to 62
(0 reviews) -
Burring ToolsSP TOOLS Replacement Blades – Deburring Tool (Reaming Pen) – Suits SP31343 – 10pc
FEATURES
REPLACEMENT BLADES FOR SP TOOLS DEBURRING TOOL/REAMING PEN (SP31343)
- Ideal for removing burrs from holes, straight edges and curved edges
- Blades are free to rotate for efficient deburring
- Large ergonomic handle with internal storage cavity for storing extra blades
- High quality steel blade stays sharp for longer
- Remove burrs from plastic, copper, aluminium & ferrous metal pipes
(0 reviews) -
Thread & Stud RepairSP TOOLS Screw Extractor Set – Spiral Type – 5pc
FEATURES
- Set Includes: 1/8”, 3/16”, 15/64”, 5/16” & 3/8”
- Remove broken studs, screws & pipe fittings
- Manufactured from heat treated chrome molybdenum steel
(0 reviews) -
Thread & Stud RepairSP TOOLS Screw Extractor Set – Straight Type – 5pc
FEATURES
- Set Includes: 1/8”, 3/16”, 15/64”, 5/16” & 3/8”
- Remove broken studs, screws, bolts, etc
- Manufactured from heat treated chrome molybdenum steel
- Square section aids removal of extractor from screws
(0 reviews) -
Speciality ToolsSP TOOLS Screw Extractor Set 25pc
- For extracting broken screws, studs & bolts: 5mm to 16mm
- Threads designed to remove broken fasteners without breaking or jamming
- Fluted type extractors that provide a solid grip on broken studs and screws
- Housed in heavy duty storage case and EVA foam tray
SET INCLUDES:
- 5x Drill Bits: 1/8”, 3/16”, 1/4“, 5/16”, 11/32”
- 5x Extractor Pins Sized to Match Drill Bits
- 5x Hex Extracting Drivers to Match Extractor Pins
- 10x Stud Drilling Guides: 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 17/32 & 9/16”
(0 reviews) -
Thread & Stud RepairSP TOOLS Stud Removal & Installation Tool
FEATURES
- Capacity 10-19mm (3/8”-3/4”)
- Suitable for the removal and installation of various sizes of studs
- Cam rotates to grip onto the stud for quick and easy use
- Use with 1/2”sq drive ratchet wrench
(0 reviews) -
Thread & Stud RepairSP TOOLS Tap & Die Set – Heavy Duty – 32pc
FEATURES
- Designed specifically for the automotive mechanic
- Covers 6-18mm with common thread pitch sizes
- Housed in EVA Foam in a blow moulded case
(0 reviews)