Specialist
Showing 1–36 of 44 results
-
Colour BandBORDO Blue Band HSS-Co TiAlN Stainless Steel Drilling Metric
- Bordo Metric Blue Band HSS-Co TiAlN Coated Twist Drills for Stainless Steel.
- DIN338
- Multi-faceted point with two helical flutes with 35 degrees of helix angle.
- The machining of stainless steels is difficult due to its work hardening properties, toughness and poor thermal conductivity, which places high demands on the cutting tools.
- The Blue Band – Stainless Steel – Series has been specifically designed to suit these difficult machining requirements.
- TiAlN coating increases tool surface hardness to 87Rc.
- For machining materials with Hardness < 350 HB : Tensile Strength <1250 N/mm2.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Colour BandBORDO Blue Band Stub HSS-Co TiAlN Stainless Steel Drilling Metric
- Bordo Metric Blue Band HSS-Co TiAlN Coated Stub Drills for Stainless Steel.
- DIN1897
- Multi-faceted point with two helical flutes with 35 degrees of helix angle.
- The machining of stainless steels is difficult due to its work hardening properties, toughness and poor thermal conductivity, which places high demands on the cutting tools.
- They are designed primarily for machining operations in lathes (screw machines) but can also be used in manual hand held drills.
- The Blue Band – Stainless Steel – Series has been specifically designed to suit these difficult machining requirements.
- TiAlN coating increases tool surface hardness to 87Rc.
- For machining materials with Hardness < 350 HB : Tensile Strength <1250 N/mm2.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
SpecialistBORDO Depth Stop Collars for TCT Countersinks – 3 Pce Set
- Depth Stop Collars for TCT Countersinks – 3 Pce Set
- Depth Stop Collars to suit 2202 series TCT Countersinks – 3 Piece Set
- Achieves accurate countersinking depths of 2mm, 4mm or 6mm.
(0 reviews) -
Extra Deep Hole HSS-Co5BORDO Extra Deep Hole HSS-Co5 Metric Series 1
- HSS-Co5 (Cobalt) Extra Deep Hole Drills
- DIN1869
- HSS-Co5 (Cobalt), 130° UX Point, 40° Helix Parabolic.
- Cobalt HSS drills are extremely hard and provide superior performance and increased tool life especially in stainless steel and high tensile steel.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Extra Deep Hole HSS-Co5
BORDO Extra Deep Hole HSS-Co5 Metric Series 2
- HSS-Co5 (Cobalt) Extra Deep Hole Drills
- DIN1869
- HSS-Co5 (Cobalt), 130° UX Point, 40° Helix Parabolic.
- Cobalt HSS drills are extremely hard and provide superior performance and increased tool life especially in stainless steel and high tensile steel.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Extra Deep Hole HSS-Co5
BORDO Extra Deep Hole HSS-Co5 Metric Series 3
- HSS-Co5 (Cobalt) Extra Deep Hole Drills
- DIN1869
- HSS-Co5 (Cobalt), 130° UX Point, 40° Helix Parabolic.
- Cobalt HSS drills are extremely hard and provide superior performance and increased tool life especially in stainless steel and high tensile steel.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Extra Long HSSBORDO Extra Long Series Bright HSS Metric
- HSS Extra Long Twist Drill
- 135° Split Point (crankshaft point).
- Split point is self centering and the short distance from the drill axis to the outer corners results in faster penetration, reducing the need for end thrust.
- Bright Finish Twist Drills have no surface treatment and are supplied in the as-ground condition. These tools are suitable for general purpose use, particularly for non-ferrous applications.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Colour BandBORDO Green Band HSS-Co TiN Carbon Steel Drilling
- Bordo Metric Green Band HSS-Co TiN Coated Twist Drills for Carbon Steel.
- DIN338
- 130° split point with two helical flutes with 33 degrees of helix angle.
- The machinability of different carbon steels is as varied as their properties. Soft-tough construction steels place a unique set of demands on the tools.
- The Green Band Series of drills and taps have been developed specifically for this range of steels.
- For machining materials with Hardness < 250 HB : Tensile Strength <900 N/mm2.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Centre Drills HSSBORDO HSS Centre Drill
- Bright Finish HSS No.1 Centre Drill 118° / 60°
- Centre Drills are used with a lathe to centre drill stock for mounting in the lathe.
- They are designed to drill a small diameter pilot hole followed by a 60° countersink which provides a bearing surface for the 60° point of the lathe centre.
- Centre drills are also used extensively with milling machines to accurately start holes.
- The hole locations can be dialled in using the milling machine’s calibrated hand wheels.
- The hole is then started using the centre drill.
- The large diameter shank on the centre drill holds the drill point right on centre.
- Once the hole is started, the centre drill is replaced with a drill of the desired diameter and the finished hole is then drilled.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Power-Hex HSSBORDO HSS Drill 1/4 Hex Shank
- Power-Hex HSS 1/4″ hex shank twist drill.
- 118° chisel point with 30° helix.
- Ideal for use with quick change adaptors and bit holders.
- Changing your drill bit is now as easy as swapping between any other 1/4″ hex shank accessory.
- Power-Hex drills are ideal for use with the extensive range of Bordo quick change adaptors, bit holders and quick change extensions.
- Bright Finish Twist Drills have no surface treatment and are supplied in the as-ground condition.
- These tools are suitable for general purpose use, particularly for non-ferrous applications.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Morse Taper ShankBORDO HSS Morse Taper Shank Drill Fractional
- DIN345.
- Taper Shank Twist Drills have conical shanks suitable for direct fitting into the tapered spindle holes of drill presses and other machines, lathe tailstocks and driving sleeves or sockets.
- This coupling is best described as a male cone within a female cone, and has self-locking and self-centering benefits.
- HSS with 118° notched point suitable for a variety of drilling applications and conditions.
- To achieve optimal performance and extended tool life, suitable lubricating/cutting oils or coolant fluids are recommended for most drilling operations.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Morse Taper Shank
BORDO HSS Morse Taper Shank Drill Metric
- DIN345.
- Taper Shank Twist Drills have conical shanks suitable for direct fitting into the tapered spindle holes of drill presses and other machines, lathe tailstocks and driving sleeves or sockets.
- This coupling is best described as a male cone within a female cone, and has self-locking and self-centering benefits.
- HSS with 118° notched point suitable for a variety of drilling applications and conditions.
- To achieve optimal performance and extended tool life, suitable lubricating/cutting oils or coolant fluids are recommended for most drilling operations.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hex Shank Impact Driver AccessoriesBORDO IMPACT Hex Shank HSS Panel Drills
- 1/4″ Hex Shank Panel Drill for Impact Drivers.
- One piece solid core design is significantly more durable than the conventional two piece design that utilises a hex sleeve on a standard round drill bit.
- Specifically engineered for use in impact drivers these bits are also fully compatible with conventional rotary drills.
- 135° split point delivers a precision start and prevents bit wander for fast, accurate holes.
- Premium quality M2 HSS ensures extreme performance and long bit life.
- 1/4″ hex shank facilitates fast tool loading in cordless impact drivers and quick change adaptors.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
IMPACT Hex Shank HSS Twist DrillsBORDO IMPACT Hex Shank HSS Twist Drill
- 1/4″ Hex Shank Twist Drill for Impact Drivers.
- One piece solid core design is significantly more durable than the conventional two piece design that utilises a hex sleeve on a standard round drill bit.
- Specifically engineered for use in impact drivers these bits are also fully compatible with conventional rotary drills.
- 135° split point delivers a precision start and prevents bit wander for fast, accurate holes.
- Premium quality M2 HSS ensures extreme performance and long bit life.
- 1/4″ hex shank facilitates fast tool loading in cordless impact drivers and quick change adaptors.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Bit SetsBORDO IMPACT Hex Shank HSS Twist Drill Set
- 1/4″ hex shank facilitates fast tool loading in cordless impact drivers and quick change adaptors.
- One piece solid core design is significantly more durable than the conventional two piece design that utilises a hex sleeve on a standard round drill bit.
- 135° split point delivers a precision start and prevents bit wander for fast, accurate holes.
- Premium quality M2 HSS ensures extreme performance and long bit life.
- Bordo Impact Bits are designed and manufactured for optimum performance in modern impact drivers.
- Not only do they offer significantly increased bit life in impact applications but they also offer exceptional performance in standard driving usage.
- The impact driver action places high peak torque demands on both insert and power bits.
- Our range features a uniquely engineered torsion zone with multi-stage hardening and tempering to dissipate damaging peak loads.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Long Reach (Aircraft) HSSBORDO Long Reach (Aircraft) HSS Fractional
- Long Reach (Aircraft) Drill
- Long Reach Drills are suitable for all general purpose drilling where extra reach is required.
- Long Reach Drills are not designed to drill deep holes.
- Maximum hole depth must be less than the flute length (FL) of the drill.
- Deep hole drilling requires the use of a Bordo Long Series Drill, Bordo Extra Deep Hole Drill or Bordo Auger Bit depending on the material being drilled.
- 135° Split Point (crankshaft point)
- Split point is self centering reducing the need for end thrust.
- The 135° point provides superior performance when drilling harder steel materials.
- In most situations it will produce thicker chips minimising work hardening of the cavity.
- Faster penetration reduces abrasion and friction along the cutting edges.
- Black Finish Drills (also called blue finish) achieve their distinctive colour by steam tempering, a thermal process resulting in a porous tool coating.
- This surface helps to keep lubricant on the tool, particularly important on the cutting edges, thus reducing friction and cold welding.
- The result is increased tool life.
- Black finish tools are generally recommended for ferrous applications where the oxide layer aids chip flow and heat dissipation.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Long Series HSSBORDO Long Series Black HSS Fractional
- ANSI B94-11
- 118° chisel point with 30° helix.
- Chisel point is suitable for general purpose drilling.
- Black Finish Twist Drills (also called blue finish) achieve their distinctive colour by steam tempering, a thermal process resulting in a porous tool coating.
- This surface helps to keep lubricant on the tool, particularly important on the cutting edges, thus reducing friction and cold welding. The result is increased tool life.
- Black finish tools are generally recommended for ferrous applications where the oxide layer aids chip flow and heat dissipation.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Long Series HSS
BORDO Long Series Black HSS Metric
- ANSI B94-11
- 118° chisel point with 30° helix.
- Chisel point is suitable for general purpose drilling.
- Black Finish Twist Drills (also called blue finish) achieve their distinctive colour by steam tempering, a thermal process resulting in a porous tool coating.
- This surface helps to keep lubricant on the tool, particularly important on the cutting edges, thus reducing friction and cold welding. The result is increased tool life.
- Black finish tools are generally recommended for ferrous applications where the oxide layer aids chip flow and heat dissipation.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Long Series HSSBORDO Long Series Bright HSS Fractional
- ANSI B94-11
- 118° split point with 30° helix.
- Split point is self centering and reduces the need for end thrust. Friction at workpiece is reduced.
- 118° point angles are ideal for use in materials such as mild steel and cast iron.
- The 118° point creates easily controlled chips which are wide and thin.
- Bright Finish Twist Drills have no surface treatment and are supplied in the as-ground condition.
- These tools are suitable for general purpose use, particularly for non-ferrous applications.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Long Series HSS
BORDO Long Series Bright HSS Metric
- ANSI B94-11
- 118° split point with 30° helix.
- Split point is self centering and reduces the need for end thrust. Friction at workpiece is reduced.
- 118° point angles are ideal for use in materials such as mild steel and cast iron.
- The 118° point creates easily controlled chips which are wide and thin.
- Bright Finish Twist Drills have no surface treatment and are supplied in the as-ground condition.
- These tools are suitable for general purpose use, particularly for non-ferrous applications.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Morse Taper ShankBORDO MTS Extension Sockets
- Morse Taper Shank Extension Sockets are used to extend tool lengths and application distances.
- They are also designed to adapt morse taper shank tools to a larger, or smaller, morse taper holder.
- All Bordo MTS extension sockets are hardened and precision ground internally and externally.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Morse Taper ShankBORDO MTS Sleeves
- MTS sleeve – 1 internal, 2 external
- The Bordo range of Morse Taper Shank Sleeves are precision ground inside and out and are also fully through hardened.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Panel Drills HSSBORDO Panel Drills HSS Black Double Ended
- 135° Split Point (crankshaft point)
- Split point is self centering reducing the need for end thrust.
- The 135° point provides superior performance when drilling harder steel materials.
- In most situations it will produce thicker chips minimising work hardening of the cavity.
- Faster penetration reduces abrasion and friction along the cutting edges.
- Black Finish Drills (also called blue finish) achieve their distinctive colour by steam tempering, a thermal process resulting in a porous tool coating.
- This surface helps to keep lubricant on the tool, particularly important on the cutting edges, thus reducing friction and cold welding.
- The result is increased tool life.
- Black finish tools are generally recommended for ferrous applications where the oxide layer aids chip flow and heat dissipation.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Panel Drills HSSBORDO Panel Drills HSS Black Single Ended
- 135° Split Point (crankshaft point)
- Split point is self centering reducing the need for end thrust.
- The 135° point provides superior performance when drilling harder steel materials.
- In most situations it will produce thicker chips minimising work hardening of the cavity.
- Faster penetration reduces abrasion and friction along the cutting edges.
- Black Finish Drills (also called blue finish) achieve their distinctive colour by steam tempering, a thermal process resulting in a porous tool coating.
- This surface helps to keep lubricant on the tool, particularly important on the cutting edges, thus reducing friction and cold welding.
- The result is increased tool life.
- Black finish tools are generally recommended for ferrous applications where the oxide layer aids chip flow and heat dissipation.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Panel Drills HSSBORDO Panel Drills HSS Bright Double Ended
- 135° Split Point (crankshaft point)
- Split point is self centering reducing the need for end thrust.
- The 135° point provides superior performance when drilling harder steel materials.
- In most situations it will produce thicker chips minimising work hardening of the cavity.
- Faster penetration reduces abrasion and friction along the cutting edges.
- Bright Finish Drills have no surface treatment and are supplied in the as-ground condition.
- These tools are suitable for general purpose use, particularly for non-ferrous applications.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Panel Drills HSSBORDO Panel Drills HSS Bright Single Ended
- 135° Split Point (crankshaft point)
- Split point is self centering reducing the need for end thrust.
- The 135° point provides superior performance when drilling harder steel materials.
- In most situations it will produce thicker chips minimising work hardening of the cavity.
- Faster penetration reduces abrasion and friction along the cutting edges.
- Bright Finish Drills have no surface treatment and are supplied in the as-ground condition.
- These tools are suitable for general purpose use, particularly for non-ferrous applications.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Power-Hex with 90° Countersink HSSBORDO Power-Hex with 90° Countersink HSS
- Power-Hex HSS 1/4″ hex shank twist drill with 4 flute 90° HSS countersink
- HSS 118° chisel point drill with 30° helix. Four flute 90° HSS countersink.
- Ideal for use with quick change adaptors and bit holders.
- Changing your drill bit is now as easy as swapping between any other 1/4″ hex shank accessory.
- Power-Hex drills are ideal for use with the extensive range of Bordo quick change adaptors, bit holders and quick change extensions.
- Power-Hex drills and countersinks are designed for use in timber and plastics – they are NOT designed for use in metal.
- Bright Finish Twist Drills have no surface treatment and are supplied in the as-ground condition.
- These tools are suitable for general purpose use, particularly for non-ferrous applications.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Colour BandBORDO Red Band HSS-Co TiAlN Tough Treatable Steel Drilling
- Bordo Metric Red Band HSS-Co TiAlN Coated Twist Drills for Tough Treatable Steel.
- DIN338
- 130° UX point with two helical parabolic flutes with 33 degrees of helix angle.
- The mechanical properties of materials are influenced diversely by the addition of alloying elements and heat treatment processes, resulting in some high-strength, quenched and tempered steels or hardened steels.
- This range has its own unique set of machining requirements which are satisfied by the Red Band – Tough Treatable Steel – Series.
- TiAlN coating increases tool surface hardness to 87Rc.
- For machining materials with Hardness < 470 HB : Tensile Strength <1500 N/mm2.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
DrillsBORDO Reduced Shank HSS 1/2″ Shank Metric
- Reduced shank HSS twist drill.
- 118° notched point with 30° helix.
- Notched point is a variation on the standard chisel point, providing faster starting and reduced drill wander.
- 118° point angles are ideal for use in materials such as mild steel and cast iron.
- The 118° point creates easily controlled chips which are wide and thin.
- Bordo reduced shank HSS drills are ground and then a black finish is achieved by steam tempering, a thermal process resulting in a porous tool coating.
- This surface aids chip flow and heat dissipation.
- The drill is then ground a second time to achieve a bright finish on the shank and cutting edges.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Reduced Shank HSSBORDO Reduced Shank HSS 1/2″ Shank Fractional
- Reduced shank HSS twist drill.
- 118° notched point with 30° helix.
- Notched point is a variation on the standard chisel point, providing faster starting and reduced drill wander.
- 118° point angles are ideal for use in materials such as mild steel and cast iron.
- The 118° point creates easily controlled chips which are wide and thin.
- Bordo reduced shank HSS drills are ground and then a black finish is achieved by steam tempering, a thermal process resulting in a porous tool coating.
- This surface aids chip flow and heat dissipation.
- The drill is then ground a second time to achieve a bright finish on the shank and cutting edges.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Reduced Shank HSSBORDO Reduced Shank HSS 1/2″ Shank Fractional Set
- Reduced shank HSS twist drill set.
- 118° notched point with 30° helix.
- Notched point is a variation on the standard chisel point, providing faster starting and reduced drill wander.
- 118° point angles are ideal for use in materials such as mild steel and cast iron.
- The 118° point creates easily controlled chips which are wide and thin.
- Bordo reduced shank HSS drills are ground and then a black finish is achieved by steam tempering, a thermal process resulting in a porous tool coating.
- This surface aids chip flow and heat dissipation.
- The drill is then ground a second time to achieve a bright finish on the shank and cutting edges.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
DrillsBORDO Reduced Shank HSS 1/2″ Shank Metric Set
- Reduced shank HSS twist drill set.
- 118° notched point with 30° helix.
- Notched point is a variation on the standard chisel point, providing faster starting and reduced drill wander.
- 118° point angles are ideal for use in materials such as mild steel and cast iron.
- The 118° point creates easily controlled chips which are wide and thin.
- Bordo reduced shank HSS drills are ground and then a black finish is achieved by steam tempering, a thermal process resulting in a porous tool coating.
- This surface aids chip flow and heat dissipation.
- The drill is then ground a second time to achieve a bright finish on the shank and cutting edges.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Reduced Shank HSS
BORDO Reduced Shank HSS 3/8″ Shank Fractional
- Reduced shank HSS twist drill.
- 118° notched point with 30° helix.
- Notched point is a variation on the standard chisel point, providing faster starting and reduced drill wander.
- 118° point angles are ideal for use in materials such as mild steel and cast iron.
- The 118° point creates easily controlled chips which are wide and thin.
- Bordo reduced shank HSS drills are ground and then a black finish is achieved by steam tempering, a thermal process resulting in a porous tool coating.
- This surface aids chip flow and heat dissipation.
- The drill is then ground a second time to achieve a bright finish on the shank and cutting edges.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Reduced Shank HSSBORDO Reduced Shank HSS 3/8″ Shank Metric
- Reduced shank HSS twist drill.
- 118° notched point with 30° helix.
- Notched point is a variation on the standard chisel point, providing faster starting and reduced drill wander.
- 118° point angles are ideal for use in materials such as mild steel and cast iron.
- The 118° point creates easily controlled chips which are wide and thin.
- Bordo reduced shank HSS drills are ground and then a black finish is achieved by steam tempering, a thermal process resulting in a porous tool coating.
- This surface aids chip flow and heat dissipation.
- The drill is then ground a second time to achieve a bright finish on the shank and cutting edges.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
SpecialistBORDO Spot Weld Drills HSS-Co5
- HSS-Co5 (Cobalt) Spot Weld Drill.
- These drills are designed for removing spot welds and are especially useful for vehicle body repairs.
- The drills are designed to cut through existing spot welds, releasing damaged panels and enabling replacements to be fitted with minimum fuss.
- The HSS-Co5 material ensures a long bit life.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Spot Weld Drills Solid Tungsten CarbideBORDO Spot Weld Drills Solid Tungsten Carbide
- Solid Tungsten Carbide Titanium Aluminium Nitride Coated (TiAlN) Spot Weld Drill.
- These drills are designed for maximum performance and tool life when used on the hard welds featured in many modern vehicles.
- TiAlN coating is especially useful when machining tough steels.
- These drills are designed for removing spot welds and are especially useful for vehicle body repairs.
- The drills are designed to cut through existing spot welds, releasing damaged panels and enabling replacements to be fitted with minimum fuss.
(0 reviews)