[email protected]
189 Gurrundah Rd, Goulburn NSW 2580
Call us:(02) 4823 5655
BAHCO Extension Shafts 330mm

BAHCO Extension Shafts 330mm

  • 330 mm long extension shaft
  • 9525-7 for max shank Ø7mm
  • 9525-10 for max shank Ø10mm
  • Two locking screws for fastening your drill
  • Supplied with hex key
  • Lacquered for rust protection

Extension Shafts 330 mm | BAHCO | Bahco Australia

In Stock
SKU: 9525 Categories: ,

Related products

  • BORDO Blue Band Stub HSS-Co TiAlN Stainless Steel Drilling Metric
    Colour Band

    BORDO Blue Band Stub HSS-Co TiAlN Stainless Steel Drilling Metric
    • Bordo Metric Blue Band HSS-Co TiAlN Coated Stub Drills for Stainless Steel.
    • DIN1897
    • Multi-faceted point with two helical flutes with 35 degrees of helix angle.
    • The machining of stainless steels is difficult due to its work hardening properties, toughness and poor thermal conductivity, which places high demands on the cutting tools.
    • They are designed primarily for machining operations in lathes (screw machines) but can also be used in manual hand held drills.
    • The Blue Band – Stainless Steel – Series has been specifically designed to suit these difficult machining requirements.
    • TiAlN coating increases tool surface hardness to 87Rc.
    • For machining materials with Hardness < 350 HB : Tensile Strength <1250 N/mm2.
    (0 reviews)
    Add to Quote This product has multiple variants. The options may be chosen on the product page
  • BORDO Reduced Shank HSS 1/2" Shank Metric
    Drills

    BORDO Reduced Shank HSS 1/2″ Shank Metric
    • Reduced shank HSS twist drill.
    • 118° notched point with 30° helix.
    • Notched point is a variation on the standard chisel point, providing faster starting and reduced drill wander.
    • 118° point angles are ideal for use in materials such as mild steel and cast iron.
    • The 118° point creates easily controlled chips which are wide and thin.
    • Bordo reduced shank HSS drills are ground and then a black finish is achieved by steam tempering, a thermal process resulting in a porous tool coating.
    • This surface aids chip flow and heat dissipation.
    • The drill is then ground a second time to achieve a bright finish on the shank and cutting edges.
    (0 reviews)
    Add to Quote This product has multiple variants. The options may be chosen on the product page
  • BORDO Blue Band HSS-Co TiAlN Stainless Steel Drilling Metric
    Colour Band

    BORDO Blue Band HSS-Co TiAlN Stainless Steel Drilling Metric
    • Bordo Metric Blue Band HSS-Co TiAlN Coated Twist Drills for Stainless Steel.
    • DIN338
    • Multi-faceted point with two helical flutes with 35 degrees of helix angle.
    • The machining of stainless steels is difficult due to its work hardening properties, toughness and poor thermal conductivity, which places high demands on the cutting tools.
    • The Blue Band – Stainless Steel – Series has been specifically designed to suit these difficult machining requirements.
    • TiAlN coating increases tool surface hardness to 87Rc.
    • For machining materials with Hardness < 350 HB : Tensile Strength <1250 N/mm2.
    (0 reviews)
    Add to Quote This product has multiple variants. The options may be chosen on the product page
  • BORDO Yellow Band HSS Aluminium Drilling
    Colour Band

    BORDO Yellow Band HSS Aluminium Drilling
    • Bordo Metric Yellow Band HSS Twist Drills for Aluminium and its alloys.
    • DIN338
    • 130° web thinned point with two helical flutes with 35 degrees of helix angle.
    • The alloying elements which achieve varying Aluminium Alloys have an effect on the machining properties of these materials.
    • This generally creates a difficult long chip formation and material which has tendencies to stick to the tool, placing a unique set of demands on tooling. Yellow Band Series contends with these difficulties.
    • For machining materials with Hardness < 200 HB : Tensile Strength <700 N/mm2.
    (0 reviews)
    Add to Quote This product has multiple variants. The options may be chosen on the product page