Drill Bits & Sets
Showing 1–36 of 300 results
-
Drill Bits & SetsBORDO 4 Cutter Glass and Tile Drill Hex Shank
- Tungsten Carbide 4 Cutter Glass and Tile Drill
- Precision diamond ground, double chamfered spear point tungsten carbide for fast cutting and extreme tool life (when used at slow to medium speeds).
- Fast starting with reduced bit wander.
- Suitable for use in: glazed and un-glazed ceramic tiles, glazed porcelain tiles, through-body porcelain tiles, plate (float) glass and annealed glass.
- Not suitable for use with toughened or laminated safety glass.
- Use a slow speed with steady but gentle pressure.
- Reduce the pressure at break through.
- For increased bit life use a cutting fluid/lubricant such as water or turpentine to reduce heat.
- When drilling multiple holes in ceramic tiles, or when drilling vitrified porcelain, we recommend using either Bordo ceramic tile drills, the Bordo mist drill product range or Brilliant Diamond core drills.
- Tungsten Carbide (commonly referred to as Carbide) is a chemical compound containing equal parts of tungsten and carbon atoms.
- Carbide is three times stiffer than steel and is much denser than either steel or titanium.
- Carbide has a very high abrasion resistance and can also withstand higher temperatures than standard HSS.
- Carbide tools are often used for machining hard materials such as ceramics and stainless steel, as well as in situations where other tools would wear away, such as high volume production runs.
- Because carbide tools maintain a sharp cutting edge better than other tools, they generally produce a better finish on parts, and their temperature resistance allows faster machining.
- Whilst tungsten carbide is extremely hard it is also brittle so it is important to avoid bit “chattering” as this is the most common cause of tool failure.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO 4 Cutter Glass and Tile Drill Set
- 4-10mm 5 Pce 4 Cutter Glass and Tile Drill Set
- Tungsten Carbide 4 Cutter Glass and Tile Drill Set
- Precision diamond ground, double chamfered spear point tungsten carbide for fast cutting and extreme tool life (when used at slow to medium speeds).
- Fast starting with reduced bit wander.
- Suitable for use in: glazed and un-glazed ceramic tiles, glazed porcelain tiles, through-body porcelain tiles, plate (float) glass and annealed glass.
- Not suitable for use with toughened or laminated safety glass.
- Use a slow speed with steady but gentle pressure.
- Reduce the pressure at break through.
- For increased bit life use a cutting fluid/lubricant such as water or turpentine to reduce heat.
- When drilling multiple holes in ceramic tiles, or when drilling vitrified porcelain, we recommend using either Bordo ceramic tile drills, the Bordo mist drill product range or Brilliant Diamond core drills.
- Tungsten Carbide (commonly referred to as Carbide) is a chemical compound containing equal parts of tungsten and carbon atoms.
- Carbide is three times stiffer than steel and is much denser than either steel or titanium.
- Carbide has a very high abrasion resistance and can also withstand higher temperatures than standard HSS.
- Carbide tools are often used for machining hard materials such as ceramics and stainless steel, as well as in situations where other tools would wear away, such as high volume production runs.
- Because carbide tools maintain a sharp cutting edge better than other tools, they generally produce a better finish on parts, and their temperature resistance allows faster machining.
- Whilst tungsten carbide is extremely hard it is also brittle so it is important to avoid bit “chattering” as this is the most common cause of tool failure.
(0 reviews) -
Drill Bits & SetsBORDO Black Finish HSS Jobber Drill Fractional
- Bordo Black Knight M2-HSS Twist Drills.
- ANSI B94-11
- 118° Split Point (crankshaft point)
- Split point is self centering and reduces the need for end thrust.
- Friction at workpiece is reduced.
- 118° point angles are ideal for use in materials such as mild steel and cast iron.
- The 118° point creates easily controlled chips which are wide and thin.
- Black Finish Twist Drills (also called blue finish) achieve their distinctive colour by steam tempering, a thermal process resulting in a porous tool coating.
- This surface helps to keep lubricant on the tool, particularly important on the cutting edges, thus reducing friction and cold welding. The result is increased tool life.
- Black finish tools are generally recommended for ferrous applications where the oxide layer aids chip flow and heat dissipation.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & Sets
BORDO Black Finish HSS Jobber Drill Fractional Set
- Bordo Black Knight M2-HSS Twist Drills.
- ANSI B94-11
- 118° Split Point (crankshaft point)
- Split point is self centering and reduces the need for end thrust.
- Friction at workpiece is reduced.
- 118° point angles are ideal for use in materials such as mild steel and cast iron.
- The 118° point creates easily controlled chips which are wide and thin.
- Black Finish Twist Drills (also called blue finish) achieve their distinctive colour by steam tempering, a thermal process resulting in a porous tool coating.
- This surface helps to keep lubricant on the tool, particularly important on the cutting edges, thus reducing friction and cold welding. The result is increased tool life.
- Black finish tools are generally recommended for ferrous applications where the oxide layer aids chip flow and heat dissipation.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & Sets
BORDO Black Finish HSS Jobber Drill Metric
- Bordo Black Knight M2-HSS Twist Drills.
- DIN338
- 118° Split Point (crankshaft point)
- Split point is self centering and reduces the need for end thrust.
- Friction at workpiece is reduced.
- 118° point angles are ideal for use in materials such as mild steel and cast iron.
- The 118° point creates easily controlled chips which are wide and thin.
- Black Finish Twist Drills (also called blue finish) achieve their distinctive colour by steam tempering, a thermal process resulting in a porous tool coating.
- This surface helps to keep lubricant on the tool, particularly important on the cutting edges, thus reducing friction and cold welding. The result is increased tool life.
- Black finish tools are generally recommended for ferrous applications where the oxide layer aids chip flow and heat dissipation.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO Black HSS Jobber Drill Metric Set
- DIN338
- 118° Split Point (crankshaft point)
- Split point is self centering and reduces the need for end thrust.
- Friction at workpiece is reduced.
- 118° point angles are ideal for use in materials such as mild steel and cast iron.
- The 118° point creates easily controlled chips which are wide and thin.
- Black Finish Twist Drills (also called blue finish) achieve their distinctive colour by steam tempering, a thermal process resulting in a porous tool coating.
- This surface helps to keep lubricant on the tool, particularly important on the cutting edges, thus reducing friction and cold welding. The result is increased tool life.
- Black finish tools are generally recommended for ferrous applications where the oxide layer aids chip flow and heat dissipation.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO Blue Band HSS-Co TiAlN Stainless Steel Drilling Metric
- Bordo Metric Blue Band HSS-Co TiAlN Coated Twist Drills for Stainless Steel.
- DIN338
- Multi-faceted point with two helical flutes with 35 degrees of helix angle.
- The machining of stainless steels is difficult due to its work hardening properties, toughness and poor thermal conductivity, which places high demands on the cutting tools.
- The Blue Band – Stainless Steel – Series has been specifically designed to suit these difficult machining requirements.
- TiAlN coating increases tool surface hardness to 87Rc.
- For machining materials with Hardness < 350 HB : Tensile Strength <1250 N/mm2.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO Blue Band Stub HSS-Co TiAlN Stainless Steel Drilling Metric
- Bordo Metric Blue Band HSS-Co TiAlN Coated Stub Drills for Stainless Steel.
- DIN1897
- Multi-faceted point with two helical flutes with 35 degrees of helix angle.
- The machining of stainless steels is difficult due to its work hardening properties, toughness and poor thermal conductivity, which places high demands on the cutting tools.
- They are designed primarily for machining operations in lathes (screw machines) but can also be used in manual hand held drills.
- The Blue Band – Stainless Steel – Series has been specifically designed to suit these difficult machining requirements.
- TiAlN coating increases tool surface hardness to 87Rc.
- For machining materials with Hardness < 350 HB : Tensile Strength <1250 N/mm2.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO Brad Point Drill
- HSS Brad Point Drill.
- Brad point drills are ideally suited to drilling dowel holes and for drilling fibreboard, plywood, softwoods and hardwoods.
- Precision ground shoulder cutters provide completely round holes and minimise break through.
- The centering tip enables drilling of precise pilot holes.
- HSS construction ensures a long service life.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO Brad Point Drill Kit
- HSS Brad Point Drill Set.
- Brad point drills are ideally suited to drilling dowel holes and for drilling fibreboard, plywood, softwoods and hardwoods.
- Precision ground shoulder cutters provide completely round holes and minimise break through.
- The centering tip enables drilling of precise pilot holes.
- HSS construction ensures a long service life.
(0 reviews) -
Drill Bits & SetsBORDO Bright Finish HSS Jobber Drill Fractional
- Bordo Fractional Quick Silver M2-HSS Twist Drills.
- ANSI B94-11
- 118° Split Point (crankshaft point).
- Split point is self centering and reduces the need for end thrust. Friction at workpiece is reduced.
- 118° point angles are ideal for use in materials such as mild steel and cast iron.
- The 118° point creates easily controlled chips which are wide and thin.
- Bright Finish Twist Drills have no surface treatment and are supplied in the as-ground condition.
- These tools are suitable for general purpose use, particularly for non-ferrous applications.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO Bright Finish HSS Jobber Drill Fractional Sets
- Bordo Fractional Quick Silver M2-HSS Twist Drills.
- ANSI B94-11
- 118° Split Point (crankshaft point).
- Split point is self centering and reduces the need for end thrust. Friction at workpiece is reduced.
- 118° point angles are ideal for use in materials such as mild steel and cast iron.
- The 118° point creates easily controlled chips which are wide and thin.
- Bright Finish Twist Drills have no surface treatment and are supplied in the as-ground condition.
- These tools are suitable for general purpose use, particularly for non-ferrous applications.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Bright Finish HSS
BORDO Bright Finish HSS Jobber Drill Metric
- Bordo Metric Quick Silver M2-HSS Twist Drills.
- DIN338
- 118° Split Point (crankshaft point).
- Split point is self centering and reduces the need for end thrust. Friction at workpiece is reduced.
- 118° point angles are ideal for use in materials such as mild steel and cast iron.
- The 118° point creates easily controlled chips which are wide and thin.
- Bright Finish Twist Drills have no surface treatment and are supplied in the as-ground condition.
- These tools are suitable for general purpose use, particularly for non-ferrous applications.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO Bright Finish Spiral Flute HSS
- Bordo step drills are ideal for electrical contractors, sheetmetal workers and auto mechanics.
- Step drills are designed for drilling repetitive holes in steel, stainless steel, copper, brass, aluminium, plastic, plexiglas, laminates and many other thin materials.
- Manufactured from premium quality high speed steel with double fluted ground cutting edges for long service life.
- No pilot hole required.
- Easy to sharpen.
- Stepless drilling in the thinnest sheets.
- Burr-free drilling without sheet deformation.
- Automatic deburring.
- Spiral flutes enable easier tool penetration.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO Bright Finish Spiral Flute HSS Set
- M2-HSS Spiral Flute Step Drill Set
- Bordo step drills are ideal for electrical contractors, sheetmetal workers and auto mechanics.
- Step drills are designed for drilling repetitive holes in steel, stainless steel, copper, brass, aluminium, plastic, plexiglas, laminates and many other thin materials.
- Manufactured from premium quality high speed steel with double fluted ground cutting edges for long service life.
- No pilot hole required.
- Easy to sharpen.
- Stepless drilling in the thinnest sheets.
- Burr-free drilling without sheet deformation.
- Automatic deburring.
- Spiral flutes enable easier tool penetration.
(0 reviews) -
Drill Bits & SetsBORDO Bright Finish Straight Flute HSS Fractional
- Bordo step drills are ideal for electrical contractors, sheetmetal workers and auto mechanics.
- Step drills are designed for drilling repetitive holes in steel, stainless steel, copper, brass, aluminium, plastic, plexiglas, laminates and many other thin materials.
- Manufactured from premium quality high speed steel with double fluted ground cutting edges for long service life.
- No pilot hole required.
- Easy to sharpen.
- Stepless drilling in the thinnest sheets.
- Burr-free drilling without sheet deformation.
- Automatic deburring.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO Bright Finish Straight Flute HSS Metric
- Bordo step drills are ideal for electrical contractors, sheetmetal workers and auto mechanics.
- Step drills are designed for drilling repetitive holes in steel, stainless steel, copper, brass, aluminium, plastic, plexiglas, laminates and many other thin materials.
- Manufactured from premium quality high speed steel with double fluted ground cutting edges for long service life.
- No pilot hole required.
- Easy to sharpen.
- Stepless drilling in the thinnest sheets.
- Burr-free drilling without sheet deformation.
- Automatic deburring.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO Bright Finish Straight Flute HSS Set
- 4-30mm 3 Pce Straight Flute HSS Step Drill Set
- M2-HSS Straight Flute Step Drill Set
- Bordo step drills are ideal for electrical contractors, sheetmetal workers and auto mechanics.
- Step drills are designed for drilling repetitive holes in steel, stainless steel, copper, brass, aluminium, plastic, plexiglas, laminates and many other thin materials.
- Manufactured from premium quality high speed steel with double fluted ground cutting edges for long service life.
- No pilot hole required.
- Easy to sharpen.
- Stepless drilling in the thinnest sheets.
- Burr-free drilling without sheet deformation.
- Automatic deburring.
(0 reviews) -
Drill Bits & SetsBORDO Bright HSS Jobber Drill Set
- 118° Split Point (crankshaft point).
- Split point is self centering and reduces the need for end thrust. Friction at workpiece is reduced.
- 118° point angles are ideal for use in materials such as mild steel and cast iron.
- The 118° point creates easily controlled chips which are wide and thin.
- Bright Finish Twist Drills have no surface treatment and are supplied in the as-ground condition.
- These tools are suitable for general purpose use, particularly for non-ferrous applications.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO Cobalt HSS-Co5 Jobber Drill Fractional
- Bordo Fractional Cobalt Tough HSS-Co5 Twist Drills.
- ANSI B94-11
- 135° Split Point (crankshaft point).
- Split point is self centering and the short distance from the drill axis to the outer corners results in faster penetration, reducing the need for end thrust.
- The 135° point should be used to cut harder steel materials especially in deep hole applications.
- In these situations it will produce thicker chips minimising work hardening of the cavity.
- Faster penetration reduces abrasion and friction along the cutting edges.
- Cobalt HSS Twist drills are extremely hard and provide superior performance and increased tool life especially in stainless steel and high tensile steel.
- Bronze Finish (gold oxide) surface treatment. The metallic brown coloured low temperature temper treatment is normally only used on cobalt tools for identification purposes.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO Cobalt HSS-Co5 Jobber Drill Fractional Set
- Bordo Fractional Cobalt Tough HSS-Co5 Twist Drills.
- ANSI B94-11
- 135° Split Point (crankshaft point).
- Split point is self centering and the short distance from the drill axis to the outer corners results in faster penetration, reducing the need for end thrust.
- The 135° point should be used to cut harder steel materials especially in deep hole applications.
- In these situations it will produce thicker chips minimising work hardening of the cavity.
- Faster penetration reduces abrasion and friction along the cutting edges.
- Cobalt HSS Twist drills are extremely hard and provide superior performance and increased tool life especially in stainless steel and high tensile steel.
- Bronze Finish (gold oxide) surface treatment. The metallic brown coloured low temperature temper treatment is normally only used on cobalt tools for identification purposes.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & Sets
BORDO Cobalt HSS-Co5 Jobber Drill Metric
- Bordo Metric Cobalt Tough HSS-Co5 Twist Drills.
- DIN338
- 135° Split Point (crankshaft point).
- Split point is self centering and the short distance from the drill axis to the outer corners results in faster penetration, reducing the need for end thrust.
- The 135° point should be used to cut harder steel materials especially in deep hole applications.
- In these situations it will produce thicker chips minimising work hardening of the cavity.
- Faster penetration reduces abrasion and friction along the cutting edges.
- Cobalt HSS Twist drills are extremely hard and provide superior performance and increased tool life especially in stainless steel and high tensile steel.
- Bronze Finish (gold oxide) surface treatment. The metallic brown coloured low temperature temper treatment is normally only used on cobalt tools for identification purposes.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO Cobalt HSS-Co5 Jobber Drill Metric Set
- Bordo Metric Cobalt Tough HSS-Co5 Twist Drills.
- DIN338
- 135° Split Point (crankshaft point).
- Split point is self centering and the short distance from the drill axis to the outer corners results in faster penetration, reducing the need for end thrust.
- The 135° point should be used to cut harder steel materials especially in deep hole applications.
- In these situations it will produce thicker chips minimising work hardening of the cavity.
- Faster penetration reduces abrasion and friction along the cutting edges.
- Cobalt HSS Twist drills are extremely hard and provide superior performance and increased tool life especially in stainless steel and high tensile steel.
- Bronze Finish (gold oxide) surface treatment. The metallic brown coloured low temperature temper treatment is normally only used on cobalt tools for identification purposes.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO COBALT TiAlN Coated Spiral Flute
- Bordo Cobalt Spiral Flute Titanium Aluminium Nitride (TiAlN) coated step drills offer unparalleled performance when drilling hard metals such as stainless steel.
- HSS-Co5 material provides increased performance and tool life when machining tough steels.
- Bordo step drills are ideal for electrical contractors, sheetmetal workers and auto mechanics.
- Step drills are designed for drilling repetitive holes in steel, stainless steel, copper, brass, aluminium, plastic, plexiglas, laminates and many other thin materials.
- High performance point for faster starting and reduced bit wander.
- No pilot hole required.
- Stepless drilling in the thinnest sheets.
- Burr-free drilling without sheet deformation.
- Automatic deburring.
- Spiral flutes enable easier tool penetration.
- Titanium Aluminium Nitride (TiAlN) is a thin film coating that was developed from Titanium Nitride.
- TiAlN offers higher temperature resistance than TiN, as well as slightly higher hardness and especially higher hot hardness (i.e. the hardness at high temperatures).
- It is primarily used in high temperature environments above the limits of TiN usage.
- This coating works by forming a thin surface layer of Alumina (Al2O3), or Aluminium Oxide ceramic.
- As the layer wears it continuously reforms.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO COBALT TiAlN Coated Spiral Flute Set
- 4-30mm 3 Pce Spiral Flute HSS Cobalt Step Drill Set
- HSS-Co5 (Cobalt) Titanium Aluminium Nitride Coated (TiAlN) Spiral Flute Step Drill Set
- Bordo Cobalt Spiral Flute Titanium Aluminium Nitride (TiAlN) coated step drills offer unparalleled performance when drilling hard metals such as stainless steel.
- HSS-Co5 material provides increased performance and tool life when machining tough steels.
- Bordo step drills are ideal for electrical contractors, sheetmetal workers and auto mechanics.
- Step drills are designed for drilling repetitive holes in steel, stainless steel, copper, brass, aluminium, plastic, plexiglas, laminates and many other thin materials.
- High performance point for faster starting and reduced bit wander.
- No pilot hole required.
- Stepless drilling in the thinnest sheets.
- Burr-free drilling without sheet deformation.
- Automatic deburring.
- Spiral flutes enable easier tool penetration.
- Titanium Aluminium Nitride (TiAlN) is a thin film coating that was developed from Titanium Nitride.
- TiAlN offers higher temperature resistance than TiN, as well as slightly higher hardness and especially higher hot hardness (i.e. the hardness at high temperatures).
- It is primarily used in high temperature environments above the limits of TiN usage.
- This coating works by forming a thin surface layer of Alumina (Al2O3), or Aluminium Oxide ceramic.
- As the layer wears it continuously reforms.
(0 reviews) -
Drill Bits & SetsBORDO Counterbore Drill 180° Bright
- Bright finish HSS-Co5 (Cobalt) for extreme tool life.
- Use to enlarge the top of an existing hole to create a cylindrical-shaped opening with a flat bottom that acts as a seat for the head of a screw or wood plug.
- Ideal for use with standard cap screws or socket head screws.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO Counterbore Drill 180° Bright Set
- 6 Pce 3-10mm 180 Degree Counterbore Drill Set
- Bright finish HSS-Co5 (Cobalt) for extreme tool life.
- Use to enlarge the top of an existing hole to create a cylindrical-shaped opening with a flat bottom that acts as a seat for the head of a screw or wood plug.
- Ideal for use with standard cap screws or socket head screws.
(0 reviews) -
Drill Bits & SetsBORDO Counterbores 180° Single
- Bright finish HSS-Co5 (Cobalt) for extreme tool life.
- Use to enlarge the top of an existing hole to create a cylindrical-shaped opening with a flat bottom that acts as a seat for the head of a screw or wood plug.
- Ideal for use with standard cap screws or socket head screws.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO Counterbores Set
- 6 Pce 3-10mm 180 Degree Counterbore Set
- Bright finish HSS-Co5 (Cobalt) for extreme tool life.
- Use to enlarge the top of an existing hole to create a cylindrical-shaped opening with a flat bottom that acts as a seat for the head of a screw or wood plug.
- Ideal for use with standard cap screws or socket head screws.
(0 reviews) -
Drill Bits & SetsBORDO Countersink Single Flute Indexable
- Carbide strip cutter with replaceable insert.
- Clean cutting even at lower RPMs.
- Tri-flat shank faciltiates high torque transmission in standard three jaw chucks.
- Chatter free countersinking and deburring even at low RPMs.
- Excellent surface finish.
- Two cutting edges for longer tool life.
- Cemented carbide insert is an alloy of Tungsten Carbide (WC) and Cobalt (Co).
- B100 is a unique rare metal grade with great heat and cracking resistance.
- TiAlN PVD coated – suitable for applications with low to intermediate cutting speed.
- PVD coated grades are recommended for applications with low feed rate where high edge toughness is required.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO Countersink Single Flute Indexable Carbide Inserts
- cutting edges for longer tool life.
- Cemented carbide insert is an alloy of Tungsten Carbide (WC) and Cobalt (Co).
- B100 is a unique rare metal grade with great heat and cracking resistance.
- TiAlN PVD coated – suitable for applications with low to intermediate cutting speed.
- PVD coated grades are recommended for applications with low feed rate where high edge toughness is required.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO Delta Point Bright Finish HSS Metric
- Bordo Metric Delta Point M2-HSS Twist Drills.
- DIN338
- Delta Point drills have a multi-faceted cutting tip.
- Rather than try and modify existing point types, or tweak the grind angles, Delta Point tip design required a revolutionary re-think of drill tip function.
- The overall length of the cutting edge significantly exceeds that of conventional drills.
- This means more edge doing the cutting and the results are simply extraordinary.
- Drilling times for a range of split point and Delta Point drills consistently showed that Delta Point bits were twice as fast in mild steel.
- During independent lifetime testing Delta point drill bits averaged 609 holes in 20mm mild steel, ten times more holes than split point drills.
- DRILLS FASTER LASTS LONGER.
- Bright Finish Twist Drills have no surface treatment and are supplied in the as-ground condition. These tools are suitable for general purpose use, particularly for non-ferrous applications.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO Delta Point Bright Finish HSS Metric Sets
- DIN338
- Delta Point drills have a multi-faceted cutting tip.
- Rather than try and modify existing point types, or tweak the grind angles, Delta Point tip design required a revolutionary re-think of drill tip function.
- The overall length of the cutting edge significantly exceeds that of conventional drills.
- This means more edge doing the cutting and the results are simply extraordinary.
- Drilling times for a range of split point and Delta Point drills consistently showed that Delta Point bits were twice as fast in mild steel.
- During independent lifetime testing Delta point drill bits averaged 609 holes in 20mm mild steel, ten times more holes than split point drills.
- DRILLS FASTER LASTS LONGER.
- Bright Finish Twist Drills have no surface treatment and are supplied in the as-ground condition. These tools are suitable for general purpose use, particularly for non-ferrous applications.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO Depth Stop Collars for TCT Countersinks – 3 Pce Set
- Depth Stop Collars for TCT Countersinks – 3 Pce Set
- Depth Stop Collars to suit 2202 series TCT Countersinks – 3 Piece Set
- Achieves accurate countersinking depths of 2mm, 4mm or 6mm.
(0 reviews) -
Core DrillsBORDO Diamond Hex Shank Core Drill
- Brilliant Diamond Vacuum Brazed Core Drill.
- Vacuum brazed, self lubricating, wax filled diamond core drills.
- One piece hex shank.
- Suitable for drilling tiles, ceramics, vitrified products, porcelain, natural and composite / engineered stone, monocottura, fibreglass, graphite, carbon fibre, FRP’s, and other highly abrasive materials.
- The wax filled core lubricates the cutting edge allowing dry, water free, drilling.
- Apply spinning core drill to workpiece at an angle so that only the edge is engaged.
- As a small groove begins to form gradually move the drill until the saw is flat and fully engaged with the workpiece.
- Alternatively position the saw using a Bordo adjustable drilling template and commence drilling with the saw flat against the workpiece.
- Drilling using Bordo Brilliant Diamond Core Drills can be done dry however the use of water cooling may extend tool life.
- Water and electricity are a dangerous combination always maintain a safe working environment.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO Diamond Hex Shank Core Drill Set
- Brilliant Diamond Vacuum Brazed Core Drill Set.
- Vacuum brazed, self lubricating, wax filled diamond core drills.
- One piece hex shank.
- Suitable for drilling tiles, ceramics, vitrified products, porcelain, natural and composite / engineered stone, monocottura, fibreglass, graphite, carbon fibre, FRP’s, and other highly abrasive materials.
- The wax filled core lubricates the cutting edge allowing dry, water free, drilling.
- Apply spinning core drill to workpiece at an angle so that only the edge is engaged.
- As a small groove begins to form gradually move the drill until the saw is flat and fully engaged with the workpiece.
- Alternatively position the saw using a Bordo adjustable drilling template and commence drilling with the saw flat against the workpiece.
- Drilling using Bordo Brilliant Diamond Core Drills can be done dry however the use of water cooling may extend tool life.
- Water and electricity are a dangerous combination always maintain a safe working environment.
(0 reviews)