Diamond Saw Blades
Showing 1–36 of 48 results
-
Circular Saw BladesBORDO Diamond Saw Blades Diamond Cup Wheels
- Diamond Cup Wheel Single Row.
- Economical cup wheel for flat grinding with fast material removal.
- Ideal for removing imperfections in cured concrete.
- 103, 125 & 180mm diameters.
- Extreme diamond count.
- Maximum material removal.
- Dry grinding.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Diamond Saw BladesBORDO Diamond Saw Blades General Purpose Continuous Rim
- Enduro Diamond General Purpose Continuous Rim.
- Continuous rim blades have softer bonds for cutting hard materials such as tile, porcelain, granite, stone, glass, and other materials that can chip easily.
- These blades don’t have individual segments but instead have a solid, continuous rim or edge.
- Most continuous rim blades are designed for wet cutting applications, providing the smoothest, chip free cuts.
- Diamond blades do not cut, they actually grind through the material by exposing new diamond at the right moment just before the old diamond wears away.
- The newly exposed diamonds again will wear, chip, or break out of the metal bond in the segment, while the metal bond gradually wears away to expose new diamond. This process is repeated over and over until there is no diamond remaining and the blade is worn out.
- Ideally and to get the maximum life out of a diamond blade, the metal should wear away at just the right time to expose new diamond for optimum cutting performance.
- If the metal wears away too quickly, the diamonds are exposed to soon and get torn out of the metal bond before they are fully worn. The result is a very short blade life.
- If the metal wears away too slowly, the diamonds wear away before new diamond is exposed. This is often referred to as a ‘glazed blade’. Without exposed diamond the blade will not cut.
- Abrasive materials like green concrete and asphalt will wear the metal bond very fast, so blades for these materials have a much harder metal bond to resist this abrasion.
- The opposite occurs on a hard clay paver the clay paver is not abrasive enough to wear the metal bond fast enough to expose fresh diamond, therefore a different and much softer alloy is needed for cutting these types.
- The single most important factor for the life of the blade is to match it to the job application and the type of equipment it is being used on.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Diamond Saw BladesBORDO Diamond Saw Blades General Purpose Segmented Rim
- General purpose.
- 7mm segmented rim produces clean, fast cuts wet and dry.
- Great for cutting a wide variety of non-abrasive materials.
- Extreme concentration of diamond for fast, clean cutting and long blade life.
- Can be used for either wet or dry cutting. Extended blade life will be experienced with wet cutting.
- Use when cutting cured concrete, reinforced concrete, clay bricks, hebel®, terracotta tiles, slate, granite, bluestone, fibreglass, reinforced plastics, wall chasing in brick & concrete.
- Diamond blades do not cut, they actually grind through the material by exposing new diamond at the right moment just before the old diamond wears away.
- The newly exposed diamonds again will wear, chip, or break out of the metal bond in the segment, while the metal bond gradually wears away to expose new diamond. This process is repeated over and over until there is no diamond remaining and the blade is worn out.
- Ideally and to get the maximum life out of a diamond blade, the metal should wear away at just the right time to expose new diamond for optimum cutting performance.
- If the metal wears away too quickly, the diamonds are exposed to soon and get torn out of the metal bond before they are fully worn. The result is a very short blade life.
- If the metal wears away too slowly, the diamonds wear away before new diamond is exposed. This is often referred to as a ‘glazed blade’. Without exposed diamond the blade will not cut.
- Abrasive materials like green concrete and asphalt will wear the metal bond very fast, so blades for these materials have a much harder metal bond to resist this abrasion.
- The opposite occurs on a hard clay paver the clay paver is not abrasive enough to wear the metal bond fast enough to expose fresh diamond, therefore a different and much softer alloy is needed for cutting these types.
- The single most important factor for the life of the blade is to match it to the job application and the type of equipment it is being used on.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Diamond Saw BladesBORDO Diamond Saw Blades Green Concrete and Asphalt
- Green concrete and asphalt blade.
- 8mm segmented rim produces clean, fast cuts wet and dry.
- Segmented blade for abrasive materials.
- Extreme concentration of diamond for fast, clean cutting and long blade life.
- Can be used for either wet or dry cutting. Extended blade life will be experienced with wet cutting.
- Use when cutting asphalt and green concrete, concrete block, light weight concrete, concrete & ceramic roof tiles, sandstone, limestone, slate, hebel®, mortar joints, and compressed fibre cement sheet.
- Diamond blades do not cut, they actually grind through the material by exposing new diamond at the right moment just before the old diamond wears away.
- The newly exposed diamonds again will wear, chip, or break out of the metal bond in the segment, while the metal bond gradually wears away to expose new diamond. This process is repeated over and over until there is no diamond remaining and the blade is worn out.
- Ideally and to get the maximum life out of a diamond blade, the metal should wear away at just the right time to expose new diamond for optimum cutting performance.
- If the metal wears away too quickly, the diamonds are exposed to soon and get torn out of the metal bond before they are fully worn. The result is a very short blade life.
- If the metal wears away too slowly, the diamonds wear away before new diamond is exposed. This is often referred to as a ‘glazed blade’. Without exposed diamond the blade will not cut.
- Abrasive materials like green concrete and asphalt will wear the metal bond very fast, so blades for these materials have a much harder metal bond to resist this abrasion.
- The opposite occurs on a hard clay paver the clay paver is not abrasive enough to wear the metal bond fast enough to expose fresh diamond, therefore a different and much softer alloy is needed for cutting these types.
- The single most important factor for the life of the blade is to match it to the job application and the type of equipment it is being used on.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Diamond Saw BladesBORDO Diamond Saw Blades Hard Brick & Masonry
- 350mm Segmented Diamond Hard Brick Blade
- Hard brick and masonry.
- 10mm segmented rim for fast cutting with enhanced blade/substrate interface cooling for long blade life.
- Optimally designed for cutting cured concrete and stone.
- Extreme concentration of diamond for fast, clean cutting and long blade life.
- Can be used for either wet or dry cutting. Extended blade life will be experienced with wet cutting.
- Use when cutting bluestone, hard clay brick, fire brick, cured concrete, concrete block, concrete brick, granite, marble, wall chasing in hard brick & concrete.
- Diamond blades do not cut, they actually grind through the material by exposing new diamond at the right moment just before the old diamond wears away.
- The newly exposed diamonds again will wear, chip, or break out of the metal bond in the segment, while the metal bond gradually wears away to expose new diamond. This process is repeated over and over until there is no diamond remaining and the blade is worn out.
- Ideally and to get the maximum life out of a diamond blade, the metal should wear away at just the right time to expose new diamond for optimum cutting performance.
- If the metal wears away too quickly, the diamonds are exposed to soon and get torn out of the metal bond before they are fully worn. The result is a very short blade life.
- If the metal wears away too slowly, the diamonds wear away before new diamond is exposed. This is often referred to as a ‘glazed blade’. Without exposed diamond the blade will not cut.
- Abrasive materials like green concrete and asphalt will wear the metal bond very fast, so blades for these materials have a much harder metal bond to resist this abrasion.
- The opposite occurs on a hard clay paver the clay paver is not abrasive enough to wear the metal bond fast enough to expose fresh diamond, therefore a different and much softer alloy is needed for cutting these types.
- The single most important factor for the life of the blade is to match it to the job application and the type of equipment it is being used on.
(0 reviews) -
Circular Saw BladesBORDO Diamond Saw Blades PCD Saw Blades
- Enduro Polycrystalline Diamond (PCD) – cement sheet, plasterboard, MDF, chipboard, plywood & plastic.
- High speed, low dust cutting in fibre cement and blue board.
- Available in 160mm to 305mm.
- Extremely hard and durable polycrystalline diamond (PCD) teeth for extreme blade life.
- Thin kerf design combined with a low tooth count ensures high speed cutting and reduced dust compared with continuous rim diamond blades.
- Designed to cut fibre cement products, plasterboard, MDF, chipboard, plywood and plastic.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Diamond Saw BladesBORDO Diamond Saw Blades Super Turbo
- Enduro Diamond Super Turbo Fast Cut General Purpose
- Turbo blades typically have soft to medium bonds for a variety of general purpose to specific cutting applications.
- Turbo blades feature a continuous rim with an edge that is serrated.
- This serrated edge is designed to give the blade faster cutting speeds while maintaining a smooth cut, combining the best qualities from both segmented and continuous rim blades.
- Diamond blades do not cut, they actually grind through the material by exposing new diamond at the right moment just before the old diamond wears away.
- The newly exposed diamonds again will wear, chip, or break out of the metal bond in the segment, while the metal bond gradually wears away to expose new diamond. This process is repeated over and over until there is no diamond remaining and the blade is worn out.
- Ideally and to get the maximum life out of a diamond blade, the metal should wear away at just the right time to expose new diamond for optimum cutting performance.
- If the metal wears away too quickly, the diamonds are exposed to soon and get torn out of the metal bond before they are fully worn. The result is a very short blade life.
- If the metal wears away too slowly, the diamonds wear away before new diamond is exposed. This is often referred to as a ‘glazed blade’. Without exposed diamond the blade will not cut.
- Abrasive materials like green concrete and asphalt will wear the metal bond very fast, so blades for these materials have a much harder metal bond to resist this abrasion.
- The opposite occurs on a hard clay paver the clay paver is not abrasive enough to wear the metal bond fast enough to expose fresh diamond, therefore a different and much softer alloy is needed for cutting these types.
- The single most important factor for the life of the blade is to match it to the job application and the type of equipment it is being used on.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Circular Saw BladesBORDO Diamond Saw Blades Tradecut Diamond Continuous Rim
- Tradecut Diamond Saw Continuous Rim
- Continuous rim blades have softer bonds for cutting hard materials such as tile, porcelain, granite, stone, glass, and other materials that can chip easily.
- These blades don’t have individual segments but instead have a solid, continuous rim or edge.
- Most continuous rim blades are designed for wet cutting applications, providing the smoothest, chip free cuts.
- Diamond blades do not cut, they actually grind through the material by exposing new diamond at the right moment just before the old diamond wears away.
- The newly exposed diamonds again will wear, chip, or break out of the metal bond in the segment, while the metal bond gradually wears away to expose new diamond. This process is repeated over and over until there is no diamond remaining and the blade is worn out.
- Ideally and to get the maximum life out of a diamond blade, the metal should wear away at just the right time to expose new diamond for optimum cutting performance.
- If the metal wears away too quickly, the diamonds are exposed to soon and get torn out of the metal bond before they are fully worn. The result is a very short blade life.
- If the metal wears away too slowly, the diamonds wear away before new diamond is exposed. This is often referred to as a ‘glazed blade’. Without exposed diamond the blade will not cut.
- Abrasive materials like green concrete and asphalt will wear the metal bond very fast, so blades for these materials have a much harder metal bond to resist this abrasion.
- The opposite occurs on a hard clay paver the clay paver is not abrasive enough to wear the metal bond fast enough to expose fresh diamond, therefore a different and much softer alloy is needed for cutting these types.
- The single most important factor for the life of the blade is to match it to the job application and the type of equipment it is being used on.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Circular Saw BladesBORDO Diamond Saw Blades Tradecut Diamond Segmented Rim
- Tradecut Diamond Segmented Rim
- High diamond count for long blade life.
- Segmented rim for clean, fast cuts both wet and dry.
- Free cutting with reduced vibration.
- Efficient slurry evacuation.
- Use to cut cured concrete, reinforced concrete, clay bricks, Hebel®, terracotta tiles, slate, granite, bluestone, fibreglass, reinforced plastics, wall chasing in brick and concrete.
- Diamond blades do not cut, they actually grind through the material by exposing new diamond at the right moment just before the old diamond wears away.
- The newly exposed diamonds again will wear, chip, or break out of the metal bond in the segment, while the metal bond gradually wears away to expose new diamond. This process is repeated over and over until there is no diamond remaining and the blade is worn out.
- Ideally and to get the maximum life out of a diamond blade, the metal should wear away at just the right time to expose new diamond for optimum cutting performance.
- If the metal wears away too quickly, the diamonds are exposed to soon and get torn out of the metal bond before they are fully worn. The result is a very short blade life.
- If the metal wears away too slowly, the diamonds wear away before new diamond is exposed. This is often referred to as a ‘glazed blade’. Without exposed diamond the blade will not cut.
- Abrasive materials like green concrete and asphalt will wear the metal bond very fast, so blades for these materials have a much harder metal bond to resist this abrasion.
- The opposite occurs on a hard clay paver the clay paver is not abrasive enough to wear the metal bond fast enough to expose fresh diamond, therefore a different and much softer alloy is needed for cutting these types.
- The single most important factor for the life of the blade is to match it to the job application and the type of equipment it is being used on.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Circular Saw BladesBORDO Diamond Saw Blades Tradecut Diamond Turbo
- Tradecut Diamond Saw Turbo Rim
- Turbo blades typically have soft to medium bonds for a variety of general purpose to specific cutting applications.
- Turbo blades feature a continuous rim with an edge that is serrated.
- This serrated edge is designed to give the blade faster cutting speeds while maintaining a smooth cut, combining the best qualities from both segmented and continuous rim blades.
- Diamond blades do not cut, they actually grind through the material by exposing new diamond at the right moment just before the old diamond wears away.
- The newly exposed diamonds again will wear, chip, or break out of the metal bond in the segment, while the metal bond gradually wears away to expose new diamond. This process is repeated over and over until there is no diamond remaining and the blade is worn out.
- Ideally and to get the maximum life out of a diamond blade, the metal should wear away at just the right time to expose new diamond for optimum cutting performance.
- If the metal wears away too quickly, the diamonds are exposed to soon and get torn out of the metal bond before they are fully worn. The result is a very short blade life.
- If the metal wears away too slowly, the diamonds wear away before new diamond is exposed. This is often referred to as a ‘glazed blade’. Without exposed diamond the blade will not cut.
- Abrasive materials like green concrete and asphalt will wear the metal bond very fast, so blades for these materials have a much harder metal bond to resist this abrasion.
- The opposite occurs on a hard clay paver the clay paver is not abrasive enough to wear the metal bond fast enough to expose fresh diamond, therefore a different and much softer alloy is needed for cutting these types.
- The single most important factor for the life of the blade is to match it to the job application and the type of equipment it is being used on.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Diamond Saw BladesBORDO Diamond Saw Blades Ultra Thin
- Ultra thin turbo rim general purpose
- Ultra thin 1.2mm kerf removes less material for super fast cutting and reduced wastage.
- The serrated edge is designed to give the blade faster cutting speeds while maintaining a smooth cut, combining the best qualities from both segmented and continuous rim blades.
- Extreme concentration of diamond for fast, clean cutting and long blade life.
- 8mm segment height provides the benefits of fast cutting with maximum control for superior cut accuracy.
- Can be used for either wet or dry cutting. Extended blade life will be experienced with wet cutting.
- Ideal for use in tile saws and angle grinders.
- Fast cutting with reduced chipping.
- Use when cutting porcelain, ceramic tiles, vitrified tiles, glazed tiles, terracotta, granite, marble, slate, limestone and sandstone.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Diamond Cutting BladesMILWAUKEE 125mm (5″) STEELHEAD™ Metal Diamond Cut-Off Blade
STEELHEAD™ Metal Diamond Cut-Off Blades use premium grade synthetic diamonds, bonded directly to the steel core through a vacuum brazing treatment to provide maximum strength. Available in 125mm – 355mm, the STEELHEAD™ Blades are uniquely designed to cut metal materials and for dry use.
(0 reviews) -
Diamond Cutting BladesMILWAUKEE 150mm (6″) Green Concrete Diamond Blade – Green
The 150mm (6″) x 2.5mm (0.100″) Diamond Blades for Green Concrete are engineered to cut green concrete and provide less down time and more productivity. The U-notch design provides fast cutting speeds, while the laser weld allows for increased durability in the hardest aggregates. The blades are engineered with keyhole gullets for rapid debris removal and extended blade life. These blades are optimised for performance with the MX FUEL™ 150mm (6″) Green Concrete Saw and are compatible with all 150mm (6″) triangle arbour green concrete saws. Pair with the MX FUEL™ 150mm (6″) Green Concrete Saw (MXFEES-0), the 150-Pack 2.5mm (0.100″) Joint Protectors (49937268) and the 150mm (6″) Skid Plate For Green Concrete Saws (49937260) for a full green concrete cutting solution. The Diamond Blades for Green Concrete are available in yellow, orange, red, green, and purple to provide a solution for all concrete types in soft to hard aggregate applications. For dry use only.
(0 reviews) -
Diamond Cutting BladesMILWAUKEE 150mm (6″) Green Concrete Diamond Blade – Orange
The 150mm (6″) x 2.5mm (0.100″) Diamond Blades for Green Concrete are engineered to cut green concrete and provide less down time and more productivity. The U-notch design provides fast cutting speeds, while the laser weld allows for increased durability in the hardest aggregates. The blades are engineered with keyhole gullets for rapid debris removal and extended blade life. These blades are optimised for performance with the MX FUEL™ 150mm (6″) Green Concrete Saw and are compatible with all 150mm (6″) triangle arbour green concrete saws. Pair with the MX FUEL™ 150mm (6″) Green Concrete Saw (MXFEES-0), the 150-Pack 2.5mm (0.100″) Joint Protectors (49937268) and the 150mm (6″) Skid Plate For Green Concrete Saws (49937260) for a full green concrete cutting solution. The Diamond Blades for Green Concrete are available in yellow, orange, red, green, and purple to provide a solution for all concrete types in soft to hard aggregate applications. For dry use only.
(0 reviews) -
Diamond Cutting BladesMILWAUKEE 150mm (6″) Green Concrete Diamond Blade – Purple
The 150mm (6″) x 2.5mm (0.100″) Diamond Blades for Green Concrete are engineered to cut green concrete and provide less down time and more productivity. The U-notch design provides fast cutting speeds, while the laser weld allows for increased durability in the hardest aggregates. The blades are engineered with keyhole gullets for rapid debris removal and extended blade life. These blades are optimised for performance with the MX FUEL™ 150mm (6″) Green Concrete Saw and are compatible with all 150mm (6″) triangle arbour green concrete saws. Pair with the MX FUEL™ 150mm (6″) Green Concrete Saw (MXFEES-0), the 150-Pack 2.5mm (0.100″) Joint Protectors (49937268) and the 150mm (6″) Skid Plate For Green Concrete Saws (49937260) for a full green concrete cutting solution. The Diamond Blades for Green Concrete are available in yellow, orange, red, green, and purple to provide a solution for all concrete types in soft to hard aggregate applications. For dry use only.
(0 reviews) -
Diamond Cutting BladesMILWAUKEE 150mm (6″) Green Concrete Diamond Blade – Red
The 150mm (6″) x 2.5mm (0.100″) Diamond Blades for Green Concrete are engineered to cut green concrete and provide less down time and more productivity. The U-notch design provides fast cutting speeds, while the laser weld allows for increased durability in the hardest aggregates. The blades are engineered with keyhole gullets for rapid debris removal and extended blade life. These blades are optimised for performance with the MX FUEL™ 150mm (6″) Green Concrete Saw and are compatible with all 150mm (6″) triangle arbour green concrete saws. Pair with the MX FUEL™ 150mm (6″) Green Concrete Saw (MXFEES-0), the 150-Pack 2.5mm (0.100″) Joint Protectors (49937268) and the 150mm (6″) Skid Plate For Green Concrete Saws (49937260) for a full green concrete cutting solution. The Diamond Blades for Green Concrete are available in yellow, orange, red, green, and purple to provide a solution for all concrete types in soft to hard aggregate applications. For dry use only.
(0 reviews) -
Diamond Cutting BladesMILWAUKEE 150mm (6″) Green Concrete Diamond Blade – Yellow
The 150mm (6″) x 2.5mm (0.100″) Diamond Blades for Green Concrete are engineered to cut green concrete and provide less down time and more productivity. The U-notch design provides fast cutting speeds, while the laser weld allows for increased durability in the hardest aggregates. The blades are engineered with keyhole gullets for rapid debris removal and extended blade life. These blades are optimised for performance with the MX FUEL™ 150mm (6″) Green Concrete Saw and are compatible with all 150mm (6″) triangle arbour green concrete saws. Pair with the MX FUEL™ 150mm (6″) Green Concrete Saw (MXFEES-0), the 150-Pack 2.5mm (0.100″) Joint Protectors (49937268) and the 150mm (6″) Skid Plate For Green Concrete Saws (49937260) for a full green concrete cutting solution. The Diamond Blades for Green Concrete are available in yellow, orange, red, green, and purple to provide a solution for all concrete types in soft to hard aggregate applications. For dry use only.
(0 reviews) -
Diamond Cutting BladesMILWAUKEE 180mm (7″) STEELHEAD™ Metal Diamond Cut-Off Blade
STEELHEAD™ Metal Diamond Cut-Off Blades use premium grade synthetic diamonds, bonded directly to the steel core through a vacuum brazing treatment to provide maximum strength. Available in 125mm – 355mm, the STEELHEAD™ Blades are uniquely designed to cut metal materials and for dry use.
(0 reviews) -
Diamond Cutting BladesMILWAUKEE 230mm (9″) STEELHEAD™ Metal Diamond Cut-Off Blade
STEELHEAD™ Metal Diamond Cut-Off Blades use premium grade synthetic diamonds, bonded directly to the steel core through a vacuum brazing treatment to provide maximum strength. Available in 125mm – 355mm, the STEELHEAD™ Blades are uniquely designed to cut metal materials and for dry use.
(0 reviews) -
Diamond Cutting BladesMILWAUKEE 230mm (9”) Universal Diamond Segmented Blade
The Milwaukee® 230mm (9″) Universal Segmented Diamond Blade is designed to the highest standards, only using quality diamonds. This blade is ideal for a wide range of cutting applications, including reinforced-concrete, concrete, brick, block, green concrete, asphalt, stone and granite. The segmented rim diamond blades operate at a maximum RPM of 6,790 and are designed for both wet and dry cutting.
(0 reviews) -
MX FuelMILWAUKEE 350mm (14″) Diamond Ultra Segmented Blade
Our Diamond Ultra Segmented Blades are engineered with notch segments to provide you with up to 25% faster cutting in cured concrete, reinforced concrete, stone, paver, brick and block. Our Diamond Ultra blades feature notch segments to clear debris faster for more efficient cutting through a wide range of wet and dry cutting applications. These segmented diamond saw blades are laser welded for maximum durability in rebar and other tough materials. We designed these Diamond Ultra Segmented Blades for use with the MILWAUKEE® MX FUEL™ 14” Cut-Off Saw and other hand-held cut-off saws, giving you the fastest cutting compared to other diamond blades on general purpose concrete and masonry materials
(0 reviews) -
MX FuelMILWAUKEE 350mm (14”) Diamond Asphalt & Green Concrete Segmented Blade
Our Diamond Segmented Blades are engineered with notch segments to provide you with up to 25% faster cutting. This Specialty blade is ideal for use in green concrete and highly abrasive materials such as asphalt and Ductile Iron. Our Diamond Ultra blades feature notch segments to clear debris faster for more efficient cutting through a wide range of wet and dry cutting applications. These segmented diamond saw blades are laser welded for maximum durability in rebar and other tough materials. We designed these Diamond Ultra Segmented Blades for use with the MILWAUKEE® MX FUEL™ 14” Cut-Off Saw and other hand-held cut-off saws, giving you the fastest cutting compared to other diamond blades on general purpose concrete and masonry materials
(0 reviews) -
Diamond Cutting BladesMILWAUKEE 355mm (14″) STEELHEAD™ Metal Diamond Cut-Off Blade
STEELHEAD™ Metal Diamond Cut-Off Blades use premium grade synthetic diamonds, bonded directly to the steel core through a vacuum brazing treatment to provide maximum strength. Available in 125mm – 355mm, the STEELHEAD™ Blades are uniquely designed to cut metal materials and for dry use.
(0 reviews) -
Concrete/Masonry BladesOX Premium Abrasive Segmented Diamond Blade
Built with the tradesman in mind, the OX Premium Abrasive Segmented Diamond Blade represents top-tier quality, tailored specifically as an asphalt and general-purpose segmented blade. This combination blade stands out for its versatility, proving efficient in various applications including pavers, blocks, concrete, and sandstone. The segmented design of this blade enhances its cutting performance and durability, ensuring precision and longevity on the job site. Whether handling asphalt or engaging in general-purpose cutting tasks, this blade offers reliability and efficiency, making it an essential tool for professionals in the construction industry. Its ability to tackle different materials with ease showcases its adaptability, making it a valuable asset for construction projects that involve diverse cutting requirements. The premium quality of this diamond blade ensures consistent and reliable performance, promising durability and efficiency throughout its usage across different applications, establishing itself as a dependable choice for tradesmen seeking versatility and performance in their cutting tools.
- Trade quality Asphalt and General Purpose segmented diamond blade
- Combination blade
- Applications: pavers, block, concrete and sandstone.
- Segmented Blade
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Diamond Saw BladesOX Premium Concrete and General Purpose Diamond Blade
Built with the tradesman in mind, the OX Premium Concrete and General Purpose Diamond Blade embodies trade-quality excellence, serving as a cost-effective and versatile blade suitable for various job site tasks. This blade stands out as a reliable all-round option, offering efficiency and durability in diverse cutting applications. With 10mm segments designed for extended lifespan, it ensures prolonged usage and consistent performance. Its cutting applications span across general building products, concrete, kerbs and slabs, concrete pavers and blocks, as well as roof tiles, showcasing its versatility and reliability in handling a wide range of construction materials. Available in sizes from 4 inches to 16 inches, this diamond blade caters to various cutting needs, providing a dependable and efficient solution for professionals in the construction industry. Whether for general-purpose cutting or specific concrete applications, this blade proves to be a valuable asset, delivering consistent results and longevity on the job site.
- Trade quality Concrete and General Purpose diamond blade
- Cost effective good all round job site blade
- 10mm segment for longer life
- Cuttings applications include general building products, concrete, kerbs and slabs, concrete pavers and blocks, roof tiles
- 4-Inch – 16-Inch
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Concrete/Masonry BladesOX Premium Flush Cut Diamond Blade
Built with the tradesman in mind, the OX Premium Flush Cut Diamond Blade – 125mm epitomizes cutting-edge precision and durability. Crafted for professionals in the construction industry, this turbo blade excels in a myriad of applications, showcasing unparalleled versatility. Designed for use with a 5-inch diameter, the blade boasts exceptional strength and resilience, making it ideal for tackling tough materials like reinforced concrete, hard brick, granite, and sandstone with utmost efficiency. The 125mm size ensures a balance between maneuverability and cutting power, providing the user with a tool that can seamlessly navigate diverse cutting tasks on the job site. The M14 flange further enhances compatibility, allowing for easy and secure attachment to a variety of tools. With meticulous attention to detail and a commitment to quality, the OX Premium Flush Cut Diamond Blade stands as a testament to the brand’s dedication to providing tradesmen with reliable, high-performance tools that meet the demands of their craft.
- Turbo Blade Type
- Applications include; reinforced concrete, hard brick, granite, sandstone
- 5″ Diameter
- M14 Flange
(0 reviews) -
Asphalt/Block BladesOX Premium Turbo Segmented Blade
Built with the tradesman in mind, the OX Premium Turbo Segmented Blade – Abrasive stands out as a top-tier choice for tackling asphalt and abrasive products. Crafted with trade-quality materials, this segmented diamond blade features a 10mm segment that enhances its durability and extends its operational life, ensuring consistent performance over extended use. The blade incorporates undercut protection, a feature designed to prevent core erosion, thus promoting longevity and maintaining cutting precision. Tailored explicitly for asphalt and abrasive products, this blade caters to the demands of professionals, offering reliable and precise cutting capabilities in these specific applications. OX’s premium turbo segmented blade serves as a dependable tool for tradespeople seeking exceptional durability and efficiency when working with asphalt and abrasive materials, ensuring consistent and accurate results on the job.
- Trade quality Asphalt segmented diamond blade
- 10mm segment for added life
- Undercut protection to prevent core erosion
- Applications: Asphalt and abrasive products
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Diamond Saw BladesOX Premium Univeral/Hard Turbo Diamond Blade
Built with the tradesman in mind, the OX Premium Universal/Hard Turbo Diamond Blade exemplifies trade-quality craftsmanship, serving as a fast-cutting universal blade designed for a wide array of cutting tasks. Whether utilised for wet or dry cutting applications, this blade delivers exceptional performance across various materials, making it a versatile tool in construction projects. Featuring cooling holes that effectively reduce blade temperature during operation, it prevents warping and extends the blade’s lifespan, ensuring durability and sustained efficiency. Compatible with angle grinders, circular saws, power saws, and tile saws, this blade offers flexibility in its usage across different tools. Its applications span a range of materials including concrete products, clay products, granite, engineering bricks, and various building products, showcasing its adaptability and reliability in diverse cutting scenarios. This premium diamond blade is an indispensable asset for professionals seeking efficiency, durability, and versatility in their cutting tasks, promising consistent performance across a multitude of construction materials.
- Trade quality Universal Turbo diamond blade
- Fast cutting universal blade/hard blade – can do wet or dry cutting on a variety of materials
- Cooling holes reduce blade temperature while cutting, preventing warping and extending blade life
- Designed to work with angle grinders, circular saws, power saws and tile saws
- Applications: concrete products, clay products, granite, engineering bricks, building products
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Diamond Saw BladesOX Pro 2CM Porcelain Cutting Blade
Built with the tradesman in mind, the OX Pro 2CM Porcelain Cutting Blade – 125/22.2/20mm is a cutting-edge tool that guarantees exceptional performance on porcelain, hard stone, and tiles. Crafted to meet the rigorous demands of professionals, this blade is suitable for both wet and dry cutting applications, providing versatility for a range of projects. The unique diamond segment of the OX Pro 2CM ensures fast cutting, making the task at hand more efficient and accurate. This feature is particularly valuable for tradesmen who prioritize precision in their work.
One of the key highlights of the OX Pro 2CM is its cooling holes, strategically placed for fast and effective heat reduction during operation. This not only enhances the stability of the centre plate but is especially crucial when cutting extremely hard materials. The incorporation of cooling holes not only contributes to the longevity of the blade but also ensures consistent performance over time, even in challenging conditions.
The mesh segment design of the OX Pro 2CM is a thoughtful addition that minimizes the chipping of materials during the cutting process. This design feature not only enhances the overall quality of the cut but also extends the lifespan of the blade by reducing wear and tear. Tradesmen can rely on the OX Pro 2CM to deliver precise and clean cuts, ensuring a professional finish on every job.
To enhance user experience, OX introduces a brand-new Photo quality screen-print on the blade. This ensures ultimate visibility on the shelf, allowing tradesmen to easily identify and select the OX Pro 2CM for their cutting needs. The clear overview of blade usage provided by the screen print adds to the convenience and efficiency of using this high-quality tool.
In conclusion, the OX Pro 2CM Porcelain Cutting Blade stands as a testament to OX’s commitment to providing top-notch tools for professionals. With its guaranteed performance, versatile applications, and innovative features, this blade is a reliable choice for tradesmen who demand precision and durability in their cutting tools.- Guaranteed to cut porcelain and all hard stone and tiles
- Suitable for wet and dry cutting
- Fast cutting – Unique diamond segment ensures swift and smooth cutting, making it easier and more accurate
- Cooling holes for fast effective heat reduction to ensure stability of the centre plate whilst cutting extremely hard materials
- Mesh segment design-ensures minimal chipping of material during cutting
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Circular Saw BladesOX Pro Abrasive Segmented Diamond Blade
Built with the tradesman in mind, the OX Demolition Saw Asphalt Segmented Diamond Blade is a cutting-edge tool designed to excel in the challenging task of cutting extremely abrasive materials, with a specific focus on green concrete. This asphalt diamond blade is meticulously crafted to meet the rigorous demands of professional demolition saw applications. The 10mm flat segment with wedge undercut protection ensures precision and durability, providing a reliable solution for tough cutting scenarios. Available in a variety of sizes, this blade offers ample coverage and cutting power, making it suitable for a wide range of projects. OX, a trusted name in the construction industry, continues to deliver top-notch tools that prioritize efficiency and precision. Elevate your cutting experience with the OX Professional Demolition Saw Asphalt Segmented Diamond Blade, a tool that embodies the commitment to quality craftsmanship that defines the OX brand.
- High performance multi purpose abrasive cutting blade
- 10mm high segment
- Applications: abrasive building materials, concrete products, roof tiles, blocks, floorsaw concrete and dual concrete/asphalt
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Asphalt/Block BladesOX Pro Asphalt Segmented Diamond Blade
Built with the tradesman in mind, the OX Demolition Saw Asphalt Segmented Diamond Blade is a cutting-edge tool designed to excel in the challenging task of cutting extremely abrasive materials, with a specific focus on green concrete. This asphalt diamond blade is meticulously crafted to meet the rigorous demands of professional demolition saw applications. The 10mm flat segment with wedge undercut protection ensures precision and durability, providing a reliable solution for tough cutting scenarios. Available in a variety of sizes, this blade offers ample coverage and cutting power, making it suitable for a wide range of projects. OX, a trusted name in the construction industry, continues to deliver top-notch tools that prioritize efficiency and precision. Elevate your cutting experience with the OX Professional Demolition Saw Asphalt Segmented Diamond Blade, a tool that embodies the commitment to quality craftsmanship that defines the OX brand.
- Professional demolition saw Asphalt diamond blade
- Abrasive blade for cutting extremely abrasive materials specialising in green concrete.
- 10mm flat segment with wedge undercut protection
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Diamond Saw BladesOX Pro Ceramics Diamond Blade
Built with the tradesman in mind, the OX Continuous Rim Diamond Blade stands as a reliable and indispensable tool for cutting all types of tiles with a guaranteed precision. Crafted for versatility and efficiency, this diamond blade features a continuous rim design, ensuring the cleanest cut possible. Whether working with ceramic, porcelain, marble, or other tile materials, this blade delivers consistent and reliable cutting results. The thoughtful construction of the Continuous Rim Diamond Blade exemplifies OX’s commitment to providing high-quality tools that prioritise precision and efficiency in every task. Elevate your cutting experience with the OX Precision Series Continuous Rim Diamond Blade, a dependable and versatile tool that reflects the precision and resilience demanded by tradesmen in their daily work.
- Cuts all tiles guaranteed
- continuous rim for cleanest cut
- Bore Size: 30mm/25.4mm
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Diamond Saw BladesOX Pro Combination Bench Saw Diamond Blade
Built with the tradesman in mind, the OX Professional Bench Saw Combination Diamond Blade is a cutting-edge tool designed for precision and longevity in various brick-cutting applications. With 10mm high laser-welded segments, this diamond blade offers greater life and durability, making it a reliable choice for professional bench saw applications. Specifically crafted for multi-purpose brick cutting, it excels in 50/50 clay/concrete, clay bricks, and pavers. The 14-inch and 16-inch options provide flexibility to cater to different project requirements. OX, a reputable name in the construction industry, continues to deliver top-notch tools that prioritize efficiency and precision. Elevate your cutting experience with the OX Professional Bench Saw Combination Diamond Blade, a tool that exemplifies the commitment to quality craftsmanship that defines the OX brand.
- Professional Bench Saw diamond blade
- 10mm high laser welded segments for greater life
- Multi purpose brick cutting applications: 50/50 clay/concrete, clay bricks and pavers
- 14-Inch
(0 reviews) -
Diamond Saw BladesOX Pro Fine Turbo Diamond Blade
Built with the tradesman in mind, the OX Fine Turbo Diamond Blade is a super-thin all-rounder tile blade designed to meet the diverse cutting needs of professionals working with granite, marble, ceramic, and porcelain. With a blade thickness of 1.2mm, this diamond blade offers precision and efficiency in a variety of applications. The turbo rim design enhances cutting speed and performance, making it an ideal choice for intricate and delicate cutting tasks. Whether tackling intricate tile work or dealing with tough materials like granite, the Fine Turbo Diamond Blade from OX delivers reliable and consistent results. The detailed design and construction of this blade exemplify OX’s commitment to providing high-quality tools that prioritize efficiency and precision. Elevate your cutting experience with the OX Fine Turbo Diamond Blade, a reliable and versatile tool that reflects the precision and durability.
- Super thin all rounder tile blade with 1.2mm blade thickness for cutting granite, marble, ceramic and porcelain.
- Turbo rim
- Bore Size: 22.2mm/20mm
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Diamond Saw BladesOX Pro MPS GP Turbo Superior Diamond Blade
Built with the professional tradesman in mind, the OX MPS Blade series revolutionises cutting efficiency and precision with the original superior diamond blades. Designed for versatility, these blades feature a superfast turbo design that delivers aggressive, clean cuts on all construction products, making them an indispensable tool for professionals. The 12mm high segment ensures longer-lasting cutting performance, reducing the need for frequent blade replacements. Safety is paramount with the OX MPS Blade series, and the reinforced centre plate adds an extra layer of protection during operation.
Incorporating innovative engineering, the OX MPS Blade series also boasts a cool-fast design with strategically placed holes for efficient heat dissipation and semi-silent vibration dampening technology, reducing operator fatigue and noise levels. These blades are truly multi-purpose, offering exceptional cutting capabilities on a wide range of materials, including granite, natural stone, clay products, engineering bricks, metal, concrete products, and all building materials. Available in sizes ranging from 4 inches to 14 inches, the OX MPS Blade series caters to various project requirements, ensuring that tradesmen have the right tool at their disposal for any cutting task. Trust OX for top-quality blades that deliver consistent, reliable performance every time on the job site.
- The original superior diamond blade
- Cuts all construction materials
- 12mm superfast turbo rim
- Reinforced, extra secure, dual centre flange and unique cool-fast design
- In use, the blade is semi-transparent and cuts out much of the vibration associated with conventional diamond tools
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Diamond Saw BladesOX Pro MPSS GP Fast Turbo Superior Diamond Blade
Built with the professional tradesman in mind, the OX MPSS Blade series sets the gold standard in cutting precision and efficiency, featuring the original superior diamond blade technology. Crafted for versatility, these blades showcase a superfast segmented turbo design that excels in delivering universal aggressive clean cuts across a wide spectrum of construction products, making them an indispensable tool for professionals in various trades. With a substantial 15mm high segment, the OX MPSS Blade series ensures longer-lasting cutting performance, significantly reducing the need for frequent blade replacements, thus saving both time and money.
Safety is paramount, and these blades are engineered with a reinforced centre plate, adding an extra layer of protection during operation, assuring users of their durability and reliability. The OX MPSS Blade series is renowned for its versatility, making it suitable for cutting a diverse range of materials, including granite, natural stone, clay products, engineering bricks, concrete products, and all building materials. Moreover, these blades can also be used with some abrasive materials, adding further flexibility to their utility.
Available in sizes ranging from 12 inches to 16 inches, the OX MPSS Blade series caters to various project requirements, ensuring that tradesmen have the right tool for any cutting task. Elevate your cutting game with the OX MPSS Blade series, the choice of industry experts who demand nothing but the best in performance and durability.
- The original superior diamond blade
- Cuts most construction materials
- 15mm superfast turbo segment
- Reinforced, extra secure, dual centre flange and unique cool-fast design
- In use, the blade is semi-transparent and cuts out much of the vibration associated with conventional diamond tools
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page